LE 9 won't launch with 10.7.2 after installing on 2nd iMac

I installed the LE 9 Upgrade onto a 2nd iMac running 10.7.2 but it won't launch.
I get an error message saying something along the lines of "This version of Logic Express (9) will not run on this version of OX S"
OS X 10.7.2 is installed.
I tried launching it unconnected from network but still no luck.
The EULA allows for installtion on up to 2 computers owned by me - which both are.

After updating to 9.1.5 it now works.
Did so before seeing the above suggestion but forgot to post that the problem was fixed.
Thx!

Similar Messages

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Instead of downloading from Apple updates on my computer, I went to apple.com, loaded it from there and the update worked fine.

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Unable to sync with MacBook Pro even after installing Po...

Unable to sync with MacBook Pro even after installing PocketMac

why don't you post the same thing again (since you posted it 3 times already)?
perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

After installing Mavericks my iMac opens with the "rolling surf" desktop. I can then start my preferred desktop from a saved 'photo but when I retsart the iMAc it reverts to "rolling surf". How can I get it to remeber to open with MY choice rather than Ap

After installing Mavericks my iMac opens with the "rolling surf" desktop. I can then start my preferred desktop from a saved 'photo but when I retsart the iMac it reverts to "rolling surf". How can I get it to remember to open with MY choice rather than Apple's?

I did a little research on this, as I found some strange things with the .plist files.
It appears that Apple has changed the way that the plist files are handled, and there is now an extra step in the trashing-the-.plist-file fix:
1. hold down the option key
2. in the Go menu in the Finder, scroll down to Libary
3. in Library, find Preferences
4. in Preferences, find com.apple.desktop.plist and drag it to the trash.
5. go to Applications > Utilities > Activity Monitor
     1. Sort by Process Name and look for two processes named cfprefsd.
     2. Make sure you select the one that has your user account, not "root", listed as the User.
     3. Click the X up at the top left to kill that process
5. restart
6. this will generate a new .plist file, so you will have to reenter your preferences.
Sorry for the confusion. Could you try this and let us know-

Please help lightroom 5 won't launch with my mac 10.6.8 what

ANY Suggestions It won't launch it say's I need 10.7 however, my other programs are working fine with 10.6.8

Thank you. It would have been lovely if they let us know (Important Notice that the New LR5 is compatible only with MAC LION 10.7 and newer Mac versions of operating systems and older, not previous Mac operating systems versions) on the main page before purchasing LR5. I've never had a LR product that didn't work with the old operating system, and I've owned all of them. I think I just trusted Adobe would continue on with the same process . So basically, we'd have to upgrade our operating system and risk the change of now having a situation with all of our current programs that work perfectly with LR5.
Is it possible that Adobe could make sure that they inform trusting customers like us, similar to when trying to market their new products campaigns, they tell us how fabulous the upcoming product are in a variety of ways.... luring us in... You know most of us are Artists.
Just make sure you make it known other than looking at the tech spec page... say like on the page where the shopping cart option is? Epson's printer wouldn't calibrate with the Adobe PS4 a few years ago. It took us months to figure out that, it had nothing to do with our calibration process. Finally....after speaking to Epson, they walked us through varies steps etc... hundreds of dollars later, we were able to get a good print, it turns out the Adobe 4 software was not compatible at that time with the new Epson software. So here we go again...
Be good to us Adobe...this was a bit out of your norm. Thanks

Itunes upgraded but won't launch with Windows 7

Hi
I upgraded to the most recent version of iTunes 2 days ago (5 April 2010) and now iTunes simply won't launch at all. I have tried some of the remedies in the posts and have even tried a complete reinstall but iTunes still will ot launch.
Does anyone have any suggestions? Thanks in advance

I had the same problem: after updating to iTunes 9.1 (no errors) I just couldn't launch it. In Task Manager I saw that the iTunes process was running but it never really opened.
After nights of frustration of scanning the net for solutions I finally managed to get iTunes to run again.
1) Firstly I deleted the new iTunes 9.1 and all programmes associated with it according to the directions given here: http://support.apple.com/kb/ht1923
It also mentions you should remove the Bonjour service but I could never make that work (no privileges or something like that).
2) After that I reinstalled a previous version of iTunes. In this case 9.0.3.15. I got the download here: http://www.oldapps.com/itunes.php
3) Then I disabled the Bonjour service with the MSCONFIG method mentioned at http://support.apple.com/kb/HT2292?viewlocale=en_US
There they state that you should check which service clashes with Windows by trying to disable one service at a time. I found out pretty quickly that it was just the Bonjour service that caused the problems. All other services could run normally.
After the reboot iTunes finally started up again and I was able to restore my library.
Only thing is that I can not use the Remote App on my iPod Touch. That apparently required the use of Bonjour.
I hope this method helps for some of you!
Cheers,
Bart

Reader 10 X won't launch with changed thumbnail icon

Hey guys,
I'm have an issue with getting Acrobat Reader to launch from a 3rd party program. Basically, in this program, you click 'view' and the pdf opens in Reader. However, on one of my computers, this isn't working. It looks like my computer's PDF default was set to launch in Windows Media Center, so I changed the default to launch with Adobe Reader. Now, in Windows Explorer, double clicking on any PDF file will launch Reader, but the icon is weird (see below) and the 3rd party program does nothing, as if it's confused as to what program to use.
------->
See how the Adobe logo doesn't take up the whole icon place? Why is the logo on a white sheet of paper here? I suspect this is causing issues with the 3rd party program.
I have uninstalled Reader 10 and even reinstalled with 9... same issue.
Running Win7 32-bit.
ANY IDEAS?
Thank you!
============ UPDATE =============
I just downloaded Adobe Acrobat X Pro. I changed the PDF default program to X Pro and that's normal now. Normal icon and 3rd party program launches Acrobat. But when I switch the default back to the regular Reader, the icon changes to the image above and my program won't launch Reader. Any ideas other than purchasing Pro? What gives?

The only other idea I have to make sure Reader is uninstalled completely; use the Acrobat Cleaner Tool from http://labs.adobe.com/downloads/acrobatcleaner.html
Note: this tool will also uninstall Acrobat if it's installed on that computer.

IMovie HD won't launch with mytv.pvr pluged in to the USB bus

I recently purchased te Eskape mytv.pvr. After installing it the iMovie HD would crash when launched. If I unplug the mytv.pvr, iMovie launched and works fine. When the mytv.pvr plugin, iMovie quit the the "The application iMove HD quit unexpectedly." error Has anyone else had this problem, or know a solution?
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 6 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.5f0
g5 PowerMac7,2 Mac OS X (10.4.9)

Mike;
I do not have any personal experience with Eskape mytv.pvr, but I have not been able to find any positive feedback regarding it in conjunction with imovie, iDVD, QuickTime or even iSight. i just do not think it will work.
Looks like your best bet it is take it back and get EyeTV or you could send the file into Toast Titanium, control-click and save the file to your HD.
Toast will convert the movie into a DV file for imovie. to use.
Sue

LE 9 won't launch with 10.7.2 after installing on 2nd iMac

Similar Messages

Maybe you are looking for