Le disque dur connecte sur le airport extreme est bien reconnu quand on se connecte avec un pc mais pas par la smart tv ils sont pourtant sur le meme reseau le disque dur n'apparait pas dans la liste des serveurs airport non plus
bonjour a tous
le disque dur usb connecte sur le airport extreme est bien reconnu quand on se connecte avec un pc mais pas par la smart tv ils sont pourtant sur le meme reseau le disque dur n'apparait pas dans la liste des serveurs airport non plus
la television est une toshiba la connexion sans fil marche ( test realise) mais le disque dur ne peut pas etre partagé
merci de votre aide
Bonjour,
Je suis très déçu aussi pour ma première utilisation de matériel Apple. J'ai acheté un Macbook Pro 15" en mars 2012 et pour pouvoir utiliser la plupart des sites professionnel avec lesquels je communique j'ai installé Parallels destop. Je travaillais avant avec Sony Vaio. Depuis que j'utilise ce Mac je suis térrifié par la lenteur du systéme. Une vrai catastrophe. Aprés plusieurs mois un ami m'explique que c'est parceque j'ai Parallels intallé.
Donc à savoir si on a besoin de pc pour travailler le Mac n'est pas une solution.
Donc je cherche aujourd'hui un moyen de revendre mon MacBook Pro pour acheter un nouveau pc.
Ceci dit j'utilise l'Ipad et l'Iphone avec beaucoup de plaisir.
Cordialement
Similar Messages
-
bonjour j'ai telecharger des applications je connecte mon ipod qui est bien reconnu et synchroniser par itunes mais lorsque j'installe les apps elles occupent de l'espace sur le disque mais ne sont pas apparentes sur mon ipod
MERCIGoogle translight:
Hello I download applications I connect my ipod which is well recognized and sync with itunes but when I install the apps they take up space on the disk but are not apparent on my ipod
THANK YOU
Try directly downloading/installing the apps directly on the iPod. If you are signed into the same iTunes account that originaly purchased the apps you will not be charged again. -
I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
ThanksThe netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you. -
I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260 -
How do I set up my AirPort Extreme to provide IP addresses without being connected to the Internet?
II'm trying to set up my AirPort Extreme in the field without an Internet connection so that devises can communicate wirelessly but there aren't any IP addresses being generated
Just run the AE in router mode.. if you have difficult with the setup do it completely manually..
This is how I do it.
Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs
As long as the AE is running in DHCP and NAT mode it will produce IP addresses.. however you cannot turn off WAN.
You could give it a static IP .. so set to static instead of dhcp if you like.. eg.
DNS and WAN errors.. double NAT, Ethernet unplugged, etc.. so it makes no real difference..
The AE will function fine as router (Wireless AP) to your network however..
Just ignore all the errors. -
Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?
Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?
Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.
-
My Airport Extreme will no longer let new user connect
The Airport Extreme will not allow new users to connect to via wifi. The users that are currently on the wifi are able to continue using the wifi, but new users cannot connect. I have tried resetting to the factory settings. But the problem has returned. I have a model A1408.
Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help. -
I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?
Rufus Cat-
Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers. <iOS: AirPrint 101> Therefore you need to take another approach. To start, I suggest you download the free HP App, ePrint Home & Biz. It has limitations, but should get you printing with your existing setup.
There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
Your best option may be to share your computer's printer as AirPrint over WiFi. Programs that are reported to do that well are Printopia and FingerPrint. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred -
I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?
sylviafromhanover wrote:
So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that.
Yes, that is correct.
Did you have the instructions that came with your Airport Extreme? Are you sure you have it setup properly? Here is the setup guide:
http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf
Ensure you have everything setup properly. Once you do this and if you are still having trouble, follow Star's instructions. -
Airport extreme. XP outlook can no longer connect
Since October My wife and I can no longer connect to our office servers using outlook on PC's via Airport extreme wireless. Both our g5 and g4 have no problems.
The PC's indicate excellent signal and status says "connected "thru our VPN connections to the office.
Both PC's suddenly stopped working this connection thru outlook and the internet.
I noticed many discussion people are in the same boat.
What happened?
Seems odd this is not getting much remedy information.
Sounds widespread.
Are there truly any technical resolutions?
I suspect something in the latest XP updates, CAT login patches etc.
My IT office guy is an amazing craftsman and he could care less about a Mac router.
They ("Windows" OS people) are so sure of themselves...little hope they might suspect there own equipment.Two things to try:
...Ensure the appropriate NLTM authentication is enabled? Probably NLTMv1.
Server Admin -> Open Directory -> Settings -> Policies -> Authentication
...Ensure that the Microsoft Windows XP clients have a compatible authentication requirement?
This security settings authentication downgrade is set via an msc widget on the higher-budget Microsoft Windows XP variants, or directly via the LMCompatibilityLevel registry knob available within all Windows variants.
With the upper-budget Windows versions, you can run the secpol.msc tool, navigate to Local Policies - Security Options, then to Network Security: LAN Manager authentication level, then (if the box is set this way) switch from "Send NTLMv2 response only" to "Send LM & NTLM - use NTLMv2 session security if negotiated".
On all Windows XP versions including the lower-budget versions, you can use regedit to switch the HKEYLOCALMACHINE\ SYSTEM\ CurrentControlSet\ Control\Lsa registry key value LmCompatibilityLevel to 1 -
I guess I posted my question as a title but that is my issue. My airport is connected via wireless yet it keeps searching for a wireless connection, hence I am experiencing bad latency and disconnection issues. Anyone know a solution?
I have the same problem. And in my case it happens when i transfer "large" files over the WiFi. When i send an MP3 filer over Skype i loose connection. When i transfer updates between my iPhone 5 / iPad 3 and iMac with Mountain Lion i loose connection. When i have a video conference i loose connection. You get the idea.
There is usually like 30 people using their own router on the 2.4 GHz band near by. None on the 5 GHz band which i use. But when my WiFi freezes on ML i can only see my own router. And i am also connected to it. But all my neighbors WiFi routers are now invisble to me. My network stalled.
What i do is that i disconnect my WiFi and then reconnect it again. Thank fixes it. But all my transfers and what not has been dropped. And i have to start all over - and the WiFi will stall again.
While my WiFi is frozen on the iMac with ML i have no problem using the same router on the same 5 GHz band with my iPhone 5 or iPad 3.
Downgrading the AirPort Extreme to 7.6.1 from 7.6.3 helped a bit. Now i only loose connection a few times each day.
It is a software error in ML i am sure of. A driver maybe. But i am suspecting that it is either a speed-sync error or an energy saving error. Like the network card turns of in the middle of a file transfer to save enrgy - maybe.
When i stream movies from my iMac to my Apple TV or 3 there is no problem at all. It is so odd. -
Need help with Airport Extreme and my new Verizon Fios Internet connection
I just got the Fios install, and the tech and I couldn't figure out how to use my Airport Extreme as my wireless connection. I'm not real tech savvy (and I've only been a Mac guy for about 18 months). My current arrangement is the basic Verizon setup with the Airport out of the loop. How can I go about moving from here back to using my Airport Extreme? I need the range! Thanks in advance for your help.
Have you tried resetting and reconfiguring the AirPort Extreme base station (AEBS)?
Are you using OS 10.5 or OS 10.4 or earlier?
Are you using the round 802.11b/g AEBS or the square 802.11b/g/n AEBS?
If you are using OS10.5 OR the square 802.11b/g/n AEBS you should refer to "Designing AirPort Networks Using AirPort Utility" (direct PDF link).
Otherwise you should refer to "Designing AirPort Extreme Networks" (direct PDF link). -
Airport Extreme 802.11g base station loses internet connection often
I just installed an Airport Extreme base station (802.11g version Apple Base Station V5.7) last week. And it keeps dropping my internet connection at least once a day.
I simply replaced an old SMC Barricade wireless router that died (and was a POS). But I only had to reset the SMC about once every 2 months. Nothing else has changed in my setup. Only the router/base station is different.
The wireless part is fine. Even when the internet connection gets dropped the hard wired AND wireless clients can still access the local network. Reseting the DSL modem has no effect. The only solution is to power cycle (unplug and plug back in) the AEBS OR restart it from Airport Admin utility.
But you can't do that from offsite. When the AEBS drops the internet connection I can't access my office network from home!
Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?
Any ideas on resolving this?
Thanks"Any ideas on resolving this?"
Looter,
Based on your description, open AirPort Admin Utility and check the configuration of your main base station on the "Internet" pane. If you're using ethernet cable from the modem to the base station, the top selector [Connect Using:] should show "Ethernet" and the second selector [Configure:] should show "Using DHCP"
Also, check your iMac's System Preferences>Network at "Show: AirPort" and check the PPPoE pane which should show no entries (unless your isp requires its use), and the TCP/IP pane which should show "Configure IPv4:" as being "Using DHCP" - while all other info is filled in automatically.
"Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?"
No, the AirPort Admin Utility is not web-based, only located on your computer with the information available to it necessary to operate the AirPort system. It does not actually administer the signal. I think that is done only by System Preferences>Network.
"I'm actually referring to the Airport Express base station not my MacBook Pro's wireless connection. Is there anywhere in the Airport Admin Utility software that tells you the status of the AEBS' internet connection NOT the wireless connection."
No, that info is not available in that utility. The information you seek is at System Preferences>Network, but only after the system scans for it. Click the "Assist me..." button and then, on the "Do you need assistance setting up a new network connection or solving a network problem?" panel that opens, click the "Diagnostics..." button. A "Network Diagnostics" panel will then open and if its scan shows there is no internet the lights to the left of "Internet" and "Server" will be yellow instead of green. Meanwhile, it continues scanning for the connection until it is re-established. I determined this by pulling my cable from the phone jack, later reinserting it.
Further information that may be helpful to you can undoubtedly be found in threads such as this other one:
http://discussions.apple.com/thread.jspa?threadID=884049&tstart=0
edit-
In re-reading, I may not have given you what you need. It sounds as if you may be "timing out" somehow on your connection. You might want to check around at some of your log-on settings to see if there is that possibility connected to one of them, even though the only thing I can think of is the "Renew DHCP Lease" button which is unknown to me, as I've never used it.
Message was edited by: myhighway -
Hello-
I have wireless router Airport Extreme 802.11AC that connect direct to Cable modem...how can I setup the D-Link DIR-655 wireless router to AE and act as extender or repeater?. Thanks in advance.Apple has done their best to install proprietary software in their wireless routers that is designed to only allow other Apple routers to repeat or extend the network wirelessly.
So, the chances are extremely small that a D-Link....or another other router for that matter.....could be configured to do what you ask.
There are no settings on an AirPort Extreme that would allow a D-Link device to extend the network, so all that you can do is experiment with different settings on the D-Link device to see if it might be possible for it to extend the network.
A post on a D-Link support forum might be a good idea to see if any D-Link specialists have some ideas on this topic.
Good luck. -
Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!This must be a tough one, no suggestions at all.
Maybe you are looking for
-
Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next. Sequence of events: The main error m
-
Call ABAP Program in Process Chain
Dear BW Gurus, I need to call an Process chain which includes ABAP Program. The ABAP Program doesn't have the variants but it accepts the inputs from the user and sets into a YXXXX table. I am not getting how to proceed in this regard. Kindly guide.
-
Numbers instead of Contacts iOS Imessage
Hi I am trying to use Imessage for the first time. I was wondering for the iOS imessage why a person's number is coming up instead of the contact name? when I went i talk with people who have Imessage, their number comes up instead of their contact n
-
Sun ONE Web Server 6.1 Search Engine
Running Sun Web Server v6.1 on Windows 2K with ColdFusion MX 6.1. When I try to access the the search page by entering: http://<server-instance>:port number/search I get a ColdFusion MX error message that says: java.lang.NullPointerException I've sea
-
what can i do, when i receive a message saying iphoto cannot be opened as it may be damaged or incomplete?