Le Pointeur en Mode Précis Bloquer

Bonjour, sur Photoshop Elements 12 - mon pointeur a certain moment se met en mode "précis" et reste bloquer dans ce mode. Alors qu'il est régler sur le mode "pointe standard". Pour résoudre le problème, je doit redémarrer mon PC (mais bon, c'est pas pratique).
Voilà la configuration de mon PC :
Windows 7 Edition Familiale Premium
Service Pack 1
Processeur AMD Athlon 'tm) II X 640 Processor 3.00 GHz
Ram 6.00Go
Exploitation 64 bits
Si vous avez la solution ... merci d'avance

Je suppose que c'est la touche 'Caps Lock' qui est bloquée en position 'majuscules'.

Similar Messages

Firefox se lance systematiquement en mode sans echec. Comment eviter cela.

Je viens d'installer FireFox 3.6.9.
A chaque lancement de Firefox une fenetre s'ouvre me signalant que je suis en mode sans echec et me propose un certain nombre de choix de config à ajuster. Quelque soit mesq choix je peux continuer et utiliser Firefox pour naviguer.
Le problème est qu'au lancement suivant de Firefox je repasse par la meme fenetre.
Comment passer directement à ma page d'acceuil FireFox???
Mon OS est Seven family

Essayez cette [https://support.mozilla.com/fr/kb/Firefox+is+stuck+in+Safe+Mode Firefox est bloqué en mode sans échec]
Vous préférerez peut-être à demander dans un forum français - http://www.geckozone.org/forum/viewforum.php?f=5
(Excusez mon français, juste un anglophone qui n'a pas eu à parler français depuis les jours d'école)

TS3694 bonjour, apres connexion de mon iphone ios 6.02 avec pc itune demande la restauration , cette dernier s'effectue bien mais a la fin de la verification : Erreur inconnue 6 l'iphone na pas pu etre restauré , et il est bloque en mode restauration

probleme de restauration avec mon iphone 4 derniere version ios,avec itunes 64 derniere version, il ne peut communiquer avec le telephone, il me demande de restaurer
je l'ai fait et a la fin de la verification il me sort une "erreur inconnue 6 l'iphone ne peut pas etre restaurer" il arrete et l'iphone est bloque en mode restauration,.
en appuyant sur les 2 boutons de l'iphone je ne peut pas sortir du mode restauration.
j'ai tout désinstallé itunes et soft apple et reinstallé, c'est toujours la meme chose.
Si je vais sur mon PC de bureau qui avec une ancienne version itunes 32, j'arrive a restaurer, mais je perd toutes mes synchronisations notament les contacts et la musique qui n'est pas sur l'autre PC

Comment réactiver un iphone bloqué en mode restauration après une erreur de code ?

Bonjour,
Un ami a tenté de dévérouiller mon i-phone 3G à plusieurs reprises. Au final, l'i-phone s'est désactivé. Il est vérouillé en mode restauration DFU (en essayant de le restaurer).
Mon opérateur n'a rien pu faire et m'a renvoyé vers APPLE.
Mon iphone est toujours bloqué.
Toute aide est la bienvenue... :-(
Merci !

sry dont understand france but error 29 is known
Erreurs 23, 28 et 29 : ces erreurs peuvent indiquer un problème matériel au niveau de votre appareil. Suivez les étapes décrites dans cet article. Pour isoler ce problème de l’appareil, essayez également d’effectuer la restauration lorsque l’appareil est connecté avec le câble USB blanc pour connecteur Dock fourni. Utilisez un ordinateur ou un réseau fiable. S’il n’y a pas d’adresse MAC ou que l’IMEI correspond à la valeur définie par défaut ( 00 499901 064000 0 ), ceci peut confirmer un problème de matériel. Un logiciel de sécurité obsolète ou mal configuré peut également provoquer cette erreur.
http://support.apple.com/kb/TS3694?viewlocale=fr_FR#error29

Mon iphone4s et bloquer en mode restauration je ne sait pas quoi faire

bonjour mon iphone 4s est bloquer en mode restauration et quand je le branche sur itune sa me met une erreur

Quel message d'erreur que vous voyez?
Ce document d'Apple devrait aider -> iOS : résolution des messages d’alerte de mise à jour et de restauration

Streaming CSV via Apache/ Tomcat with Mod Proxy

I have Apache hooked up to Tomcat using mod_proxy and attempts to stream a CSV file from a Struts action via tomcat fails.
Using the tomcat port localhost:8080/testappp the streaming works fine but for some reason it does not work via the apache url
Build is Red Hat Enterprise Linux AS release 4 on Apache 2.0.52-25 and Tomcat 5.5
Below are pastes of the apache conf file and tomcat server.xml
Thanks
# httpd.conf
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# Don't give away too much information about all the subcomponents
# we are running. Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/etc/httpd"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile run/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 120
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive Off
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_ldap_module modules/mod_auth_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_svn_module /usr/lib/httpd/modules/mod_dav_svn.so
LoadModule authz_svn_module /usr/lib/httpd/modules/mod_authz_svn.so
# Load config files from the config directory "/etc/httpd/conf.d".
Include conf.d/*.conf
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
User apache
Group apache
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [Email]root@localhost[Email]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName ext02:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/var/www/html"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/var/www/html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
<IfModule mod_userdir.c>
# UserDir is disabled by default since it can confirm the presence
# of a username on the system (depending on home directory
# permissions).
UserDir disable
# To enable requests to /~user/ to serve the user's public_html
# directory, remove the "UserDir disable" line above, and uncomment
# the following line instead:
#UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.php index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig /etc/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#CustomLog logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# For a single logfile with access, agent, and referer information
# (Combined Logfile Format), use the following directive:
CustomLog logs/access_log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "/var/www/icons/"
Alias /admin "/home/boss4/web/geoland/admin/"
Alias /bboard "/home/boss4/web/phpBB3/"
<Directory "/var/www/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/home/boss4/web/geoland/admin">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/home/boss4/web/phpBB3">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# WebDAV module configuration section.
<IfModule mod_dav_fs.c>
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort NameWidth=*
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
AddDefaultCharset UTF-8
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
# See http://www.iana.org/assignments/character-sets
# for a list of sorts. But browsers support few.
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# Putting this all together, we can internationalize error responses.
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
# Alias /error/include/ "/your/include/path/"

Please note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right??

Issue with CIS jar version - cis-application-8.0.0.jar on content server

We are having a problem adding this jar to our custom component. We are using this APIs to check-in some programatically.
Following is the error when we try to deploy our component with this jar
===============================================================
IdcAdmin: Content Server idc status: Stopped successfully
Starting the Content Server idc... The server terminated unexpectedly.
02.28 11:36:35.834 main NativeOsUtils version mismatch. The native code version is "7.1.0.2" and the Java version is "7.0.6.0".
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x00002ac72c918500, pid=26841, tid=47034930753168
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [libjvm.so+0x3a8500]
========================================================
The content server version is 10.1.3.3.
And the jar version is cis-application-8.0.0.jar. We are able to use the same jar standalone. What could be the problem? Should we need to upgrade to a diffrent jdk version? I am worried that might cause more problems.
Regards,
Pratap

Thanks for your inputs.
So far I have been looking at only CHECKIN_NEW_FORM and CHECKIN_SEL_FORM services for creating and updating content. items These services require files to be attached. I checked the definitive guide and found that there are 2 other similar services,CHECKIN_NEW and CHECKIN_SEL, that don't need the file to be attached. Instead we can specify the file path of the primary file. Since the xml content file to be checked is in th content server itlsef, these services can be used in my case. Moreover since my content checkin logic is in the context of a service, my code become more simpler.
I began working on it and am calling executeServiceSimple("CHECKIN_NEW") or executeServiceSimple("CHECKIN_SEL") based on whether the content to be checked in is new or to be updated. I am setting all the metadata values of the content file in the m_binder local data of the service object.
I thought this should work cleanly but I am getting the below error
============================================
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.data.DataException: !csCheckinFileKeyNotSpecified,primaryFile
at intradoc.server.DocServiceHandler.addFile(DocServiceHandler.java:3251)
at intradoc.server.DocServiceHandler.addFiles(DocServiceHandler.java:410)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sitestudio.SSClassHelper.invokeRaw(Unknown Source)
======================================================
I printed out all the local data in the m_binder object. The primaryFile value is pointing to the right file path. The file is also been created in the correct location.
The dID, dDocName, dOriginalFile, dRevLabel values are all set properly. But still I am getting this error. I am not able to figure out the cause of this. Please help. Is this approach incorrect?
-Pratap

Error occured while using checkInFileStream of CIS

Hi,
I am having problem using the CIS in client mode. I am trying to use the CheckIn api. I am unable to find the problem. Following are the details:
FLOW: Custom application – client Api – cis-server(Deployed in oracle application server) – content server.
The part of cis-server -- content server works. I have tested the chekin being successful using the web application http://localhost:8888/cis-admin/ucpmbrowsecategory.do?category=active
But the Custom application – Client Api – cis-server part does not work for me
Following is the code for CheckIn along with the exception trace:
public String checkIn() {
System.out.println("ECM1Service :: checkIn :: Started");
String contentId ="";
try {
Properties properties = new Properties();
properties.setProperty(ICISApplication.PROPERTY_CONFIG_TYPE, "client");
properties.setProperty(ICISApplication.PROPERTY_CONFIG_CLIENT_CONNECTION, "jndi");
properties.setProperty("jndi."+Context.INITIAL_CONTEXT_FACTORY,ConfigUtils.getEntry("jndiInitialContextFactory"));
properties.setProperty("jndi."+Context.PROVIDER_URL, ConfigUtils.getEntry("jndiProviderUrl"));
properties.setProperty("jndi."+Context.SECURITY_AUTHENTICATION, ConfigUtils.getEntry("jndiSecurityAuthentication"));
properties.setProperty("jndi."+Context.SECURITY_PRINCIPAL,ConfigUtils.getEntry("jndiSecurityPrincipal"));
properties.setProperty("jndi."+Context.SECURITY_CREDENTIALS, ConfigUtils.getEntry("jndiSecurityCredentials"));
ICISApplication client = CISApplicationFactory.initialize(properties);
//Connect
System.out.println("ECM1Service :: checkIn :: Connect Started");
ISCSDocumentCheckinAPI api = client.getUCPMAPI().getActiveAPI().getDocumentCheckinAPI();
ICISTransferStream transferStream = client.getUCPMAPI ().createTransferStream();
transferStream.setFile(new File ("c:\\fileStreamTest.txt"));
//getSCSContext
ISCSContext context = client.getUCPMAPI ().getActiveAPI ()._createSCSContext ();
context.setUser ("sysadmin");
context.setCrendentials("idcdev");
context.setAdapterName ("ecm");
//getActiveContent
ISCSContent activeContent = (ISCSContent) client.getUCPMAPI ().createObject(ISCSContent.class);
ISCSContentID contentID = (ISCSContentID) client.getUCPMAPI ().createObject(ISCSContentID.class);
contentID.setContentID("TEST_1");
AppLog.debug("ECM1Service :: checkIn :: contentID"+contentID.getContentID());
activeContent.setContentID (contentID);
activeContent.setTitle ("TEST_1");
activeContent.setType ("Test");
activeContent.setSecurityGroup ("Public");
activeContent.setSecurityAccount("fiscalAssistantOnly");
//Execute
System.out.println("ECM1Service :: checkIn :: Execute Started");
ISCSDocumentCheckinResponse result = api.checkinFileStream (context, activeContent, transferStream);
System.out.println("ECM1Service :: checkIn :: Execute Started after");
String message = result.getMessage ();
ICISID icisId = result.getIdentifier();
contentId = icisId.getPropertyAsString("dDocName");
System.out.println("ECM1Service :: main :: message: "+message);
System.out.println("ECM1Service :: main :: icisId: "+icisId.getPropertyAsString("dDocName"));
System.out.println("ECM1Service :: checkIn :: Execute Completed");
} catch (Exception e) {
e.printStackTrace ();
System.out.println("ECM1Service :: checkIn ::Completed");
return contentId;
EXCEPTION:
INFO [main] (AppLog.java:40) - ECMService :: checkIn :: Execute Started
[2008-08-30 15:11:20,234] [main] DEBUG (cis.profiler) - <Timer SectionName="invokeCommand" ThreadName="main" Begin="1220123480234" Desc="" />
[2008-08-30 15:11:20,234] [main] DEBUG (cis.profiler) - <Timer SectionName="FacadeExecuteCommand" ThreadName="main" Begin="1220123480234" Desc="active.document.checkin.checkinFileStream" />
[2008-08-30 15:11:21,734] [main] ERROR (com.stellent.cis.server.filetransfer.impl.ClientResourceHandler) - Error parsing XML
org.dom4j.DocumentException: Error on line 9 of document : <Line 9, Column 46>: XML-20190: (Fatal Error) Whitespace required. Nested exception: <Line 9, Column 46>: XML-20190: (Fatal Error) Whitespace required.
     at org.dom4j.io.SAXReader.read(SAXReader.java:355)
     at org.dom4j.io.SAXReader.read(SAXReader.java:271)
     at org.dom4j.DocumentHelper.parseText(DocumentHelper.java:215)
     at com.stellent.cis.server.filetransfer.impl.ClientResourceHandler.uploadFile(ClientResourceHandler.java:242)
     at com.stellent.cis.server.filetransfer.impl.ClientResourceHandler.publishResource(ClientResourceHandler.java:155)
     at com.stellent.cis.server.filetransfer.SCSContentTransferStream.writeObject(SCSContentTransferStream.java:259)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
The message indicates that there is a parse error with the a xml file but I am unable to figure which xml file??
My adapaterconfig.xml file is as below:
<?xml version="1.0" encoding="UTF-8" ?>
- <config>
- <properties>
<property name="webPath">http://localhost:8888/cis-server</property>
</properties>
<jndi />
- <adapter default="true" name="ecm" type="scs">
- <config>
<property name="port">xxxx</property>
<property name="connectionTimeout">20000</property>
<property name="type">socket</property>
<property name="persistentConnection">false</property>
<property name="host">ecmserver.xxx.com</property>
<property name="eventPollingEnabled">true</property>
<property name="cacheEnabled">true</property>
</config>
<beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml" />
</adapter>
</config>
Please let me know pointers to this problem.
Thanks in advance.
Aparna
Edited by: user537651 on Aug 30, 2008 12:56 PM

Disabling the event polling has helped to some extent. I did not have any Command cache properties set and had event polling enabled. This came by default. Oracle support rep has told that he had seen miscellaneous errors with enabling the event poll while the chache properties are not set.
This has helped when I deploy cis-admin application to the Oracle 10g app server on a windows machine but again, when I do the same on another machine i.e. a unix machine (I doubt if operating system would be the cause) it did not work.
Thanks,
Aparna Raj Golla

Bonjour. J'ai créé un album photo avec I-Photo sur mon Mac. Après avoir effectué le paiement comme demandé, le logiciel a assemblé le livre puis a commencé le téléchargement. Mais ce téléchargement s'est bloqué et plus rien ne se passe. J'ai ré-essay

Bonjour, j'ai créé un album photo avec I-Photo sur mon mac.
Après avoir effectué le paiement comme demandé, le logiciel a assemblé le livre et a commencé le téléchargement.
Mais il se bloque à chaque essai au début du téléchargement ...
Ce n'est pourtant pas la 1ère fois que je crée des albums.
Mais c'est la 1ère fois que j'ai des problèmes.
Quelqu'un aurait-il une solution ?
Merci d'avance
Bertrand

Merci jmlevy de te pencher sur mon problème.
Voilà une photo de mon panneau page :
Puis une autre d'une page qui ne ressemble plus à rien après changement de pagination:
Voici une ancienne page 28 devenue page 29. Fantastique, non ?
On peut voir :
Que mes blocs sont décalés par rapport à la maquette
que le bloc noir de la page 28 déborde sur la page 29.
Que mon bloc de texte est perturbé par l'ajout sous-jacent d'une page de maquette
que ma pagination a conservé les attributs d'une page pair (numérotation à gauche) alors qu'elle est passée impaire.
J'aurai considéré comme normal que mon ancienne p.28 se soit déplacée en page impaire avec le bloc texte bien placé ET avec les attributs de page (liés au gabarit, tels que pagination, filets, bas de page roulants) modifiés automatiquement. Or il n'en est rien.
Tu me demandais des éclaircissements par rapport à "J'importe mes gabarits dans le document au fur et à mesure de la construction du livre et je libère les éléments de gabarit afin de pouvoir couler le texte et disposer l'icono. Lorsque c'est fait, je ne retourne pas dans le mode page d'InDesign. J'attaque la page suivante." Voici, plus en détails ce que je fais au moment où je monte une nouvelle page. Mes gabarits ont été préparé en amont.
J'ajoute une page au document (ex : une page de texte)
je lui confère le gabarit qui va avec (ex : C-présentation ch1, cf plus haut)
je libère les éléments de gabarits pour pouvoir couler le texte et disposer les images.
quand ma page est finie je recommence l'étape 1.
Est-ce que c'est à l'étape 3 que je me plante ?
Est-ce qu'il y aurait d'autres explications à ce malheureux schmilblick ?
Merci d'avance.

Pourquoi mon mac démarre en mode safe boot?

Sans raison apparente, mon mac s'est mis à démarrer en mode safe boot: un écran gris avec marqué en haut à droite en rouge "Safe Boot" puis le choix entre ma session et une session invité. Si je clique sur une de ces deux options, la session va se mettre en place mais tout se met à ramer ou alors à se bloquer. En revanche, si à partir de cet écran je ne choisis aucune option mais clique sur redémarrer, il effectue l'opération de redémarrage (en prenant beaucoup de temps) puis tout semble redevenir à la normale... Mais est-ce que tout ça est bien normal, justement?

IMac processeur 2.5 Ghz Intel Core i5, mémoire 4Go 1333 Mhz DDR3, acheté en septembre 2011, fonctionne avec Mac OS X 10.7.5.

Impossible de faire reconnaitre un disque dur en mod target dans l'utilit

Bonjour,
Dans le cadre de mon stage en entreprise , on m'a demander de résoudre un problème de détection de disque dur.
Je m'explique.
Il y a un mac G5 avec mac os X snow léopard 10.6.3 , j'ai aussi un mac book pro avec snow leopard 10.6. serveur.
Le soucis: sur le snow serveur il y a l'utilitaire d'image système, quand je branche un disque dur externe firewire , l'utilitaire d'image système me trouve le disque ( il y a 3 partition dessus , donc 2 c'est en snow leopard)
par contre quand je met le G5 en mod target et relier au mac book pro , il n'affiche pas le disque dans l'utilitaire d'image système. avez vous une petite idée du probleme ?
PS: je précise que je suis novice dans la maintenance réseaux , je suis plus dans la maintenance informatique :s
On m'a dit que sonw leopard serveur ne prenais pas en charge des image leopard pour le net install
Edit Post

Hi
If this is truly a G5 Mac and you've not confused it with similar looking Intel Hardware then as far as I know you can't install 10.6 on a G5 Mac. What version of the OS exactly is installed on the G5?
Assuming I've understood you correctly You can't use 10.6 SIU to create NetBoot Images of an operating system prior to 10.6. To create an nbi of a 10.5 System you would need 10.5 SIU installed on a 10.5 Server or Client OS. Once the NetBoot Image has been created you can 'serve' the image from 10.6 Server's NetBoot Service.
HTH?
Tony

Adobe Reader: Téléchargement bloqué à 44% avec l'outil d'installation

Bonjour,
Après plusieurs essais, il m'est impossible d'installer Adobe Reader XI sur mon Mac tournant sous Yosemite.
La bar de téléchargement reste bloqué à 44% sur l'outil d'installation de Adobe Reader XI.
Je précise que j'ai téléchargé le fichier AbodeReaderInstaller.dmg sur le site officiel d'Adobe.
Une idée de comment résoudre ce problème ?
Cordialement,

You can try using the offline installer from http://get.adobe.com/reader/enterprise/

CIS client over OC4J 9

Can I use CIS-Server in RMI mode over OC4J9?
I have done the preliminar tests and I haven't found any bad issue.
Thanks and best regards,
Eduardo.

Can't help you with the Eclipse side of it, but the generic WS documentation talks about how OC4J WS tooling can support proxy generation from WSDL:
http://download.oracle.com/docs/cd/B25221_04/web.1013/b14434/wsassemble.htm#CHDJJIEI
As an aside, OC4J 9.0.4 is very, very old. I'd look at upgrading to 10.1.3.x if you can, particularly if you are making use of WS. If not and you need to stay on the older codebase, then certainly upgrading to 10.1.2.x would be advisable -- this is the same base codeline as 9.0.4 but just more recent.
-steve-

CIS initialization -- cis.config.server.type

Hi,
In CIS developer guide in the CIS initialization section (server mode)
there is a property called cis.config.server.type (ICISApplication.PROPERTY_CONFIG_SERVER_TYPE)
it can be "oracle", "weblogic", "standalone" , "sunone" etc.
what is this property for and what difference does it make to set it.
Thanks

Hi
Basically what you are seeing there is the list of supported Application servers on which you can deploy the CIS ear files and start using the CIS GUI and other features. The difference would arise from the fact that different application servers have different set of start up sequence and scenario and hence CIS to get initialized it would be using the property value.
Thanks
Srinath

Mon iphone 3GS est bloqué bouygues

Bonjour,
j'ai fais réparé mon iphone 3gs dans l'apple store de opéra car il était cassé. Le vendeur m'en a donné un neuf qui m'a value 80 euros. Il m'a dit que l'iphone était tout opérateur et que n'importe quel sim pouvait être mise. Mais, après mainte et maintes reprise, en restaurant au moins 20 fois l'iphone il est toujours bloqué bouygues. J'avais une ancienne puce bouygues (qui ne marche plus) mais qui m'a servis pour aller jusqu'au menu de l'iphone avec tout ses utilitaires. Etant toute fière de moi, je met ma puce free mais la, sa ne marche pas, il y'a marqué réseau indisponible... Et puis quand je vais dans information, il dit bien que l'operateur est bouygues.
Et je pense que si je refais encore une fois la restauration, l'iphone va bloqué et rester figer sur l'image du mode recovery.. Je ne sais plus quoi faire. Faut-il que je repasse dans l'apple store ? Quand je lis les forums qui traitent de ce sujet, ils parlent tous de jailbreak ou de cydia. Mais moi je veux que iphone ne cours aucun riques car je viens de l'acheter.
Aidez moi s'il vous plait!

I have exactly the same issue. However holding the home and power buttons down together ended me to displaying connecting my iPhone to iTunes.
And iTunes does not detect the iPhone. Any tips?

Le Pointeur en Mode Précis Bloquer

Similar Messages

Maybe you are looking for