Lead Management authorization issue

Dear Exports,
   We have configured CRM 2007 web-ui  lead management for our client,while creating lead  we have given some menditory fields  after entering these field if my user want to enter some notes it is not allowing.
  Could pls suggest me if any authorization require for this issue
Regards
Subbaraju

To see only your transactions use auth. object CRM_ORD_OP.

Similar Messages

  • Solution manager Authorization issue

    Dear all,
    We are maintaining a enterprise solution manager.
    we maintain all our SAP clients issues which is posted in our solution manager.
    Now the issue is if the clients login in to our solution manager to see the issue status, they are able to see all the  clients issues which is posted.
    but we want to restrict the authorization not to see other clients issues which is posted in our solution manager.
    we want them to see the issues only which is posted by them.
    Please give me if there is set of authorization to do this.
    Regards
    Prakash

    HI,
    From ur post, I think u have provided authorization to access the tcode crm_dno_monitor. In that case, u cannot restrict him to see all other messages. If u want to restrict the authorization, create a variant with necessary inputs which shows the result ur customer wants to see and assign that to his favourites. Only provide access to call that variant.
    Rajeev.

  • Authorization - Sales Manager: Lead Management / Opportunity Management

    Hi Portal Gurus,
    As per our requirement, in the 'Sales Manager' role, under 'Sales Cycle',  we need to provide only 'Lead Management' for one set of users and 'Opportunity Management' for another set of users and both for other set of users.
    What would be the best way to do that. Thanks in advance for your help!
    - Jas

    Hello Jasendu,
    The best way to implement this is to maintain a single Sales Role with all the sub catagories ('Lead Management' , 'Opportunity Management' ) and apply role filtering concept according to the users. That way you need to maintain a single Sales role. Check out the below blog for more details abour role filtering.
    Filtering Role Content by User Attributes
    Or else, you can create three different roles, one for each 'Lead Management' , 'Opportunity Management'  and other containing both of them and assign to users accoedingly.
    Regards
    Deb
    [Reward Points for helpful answers]
    Message was edited by:
            Debasish Sarkar

  • Authorization issue with VA02 radio buttons

    Hello All,
    We are stuck at one authorization issue. The user navigates using tcode VA02.
    1)     Execute Tcode -VA02=>
    2)     2) puts order number # 100001 =>
    3)     press enter =>
    4)     press enter =>
    5)     Screen: Change (Company Name) Return 100001: Overview =>
    6)     Option: Display doc. Header details (looks like a magnifying glass beside PO_date) =>
    7)     This bring us to Change (Company Name) Return 100001: header Data =>
    8)     select status tab =>
    9)     on Status tab lower end there is a button u201CObject Statusu201D =>
    10)     Press it => 
    11)     Come to Change Status :
    12)     On this screen There is Status with status no. on the right side with 7 options
    e.g:
    u2022     1 BLK Approval Required for,
    u2022     2 BL1 Approval for Credit,
    u2022     3 BL2 Approval for material Replacer
    We need to restrict the radio button access for user for which we are unable to find the authorization object.
    Could any one help.
    Thanks & Regards
    gab

    Hi,
    Use ST01 to trace the user activities and check which objects its hitting when you click on those buttons, then you can restrict radio buttons using those objects.
    I have'nt run the tcode myself and performed the steps you mentioned, but if you think its calling other transaction from those buttons you can manage tht in SE97, or add the t-code VA02 in the S_tcode auth object in PFCG.
    Hope this should get you going
    Thanks,
    Vijay

  • Authorization issue when using MB1B

    Hello to all,
    Please help me identify why the user is having authorization issue on MB1B...there's an error message that displays
    "no authorization for delivery from shipping pont 1234"
    Please advise on how to proceed with this error.  What are the checks needed?
    Thanks.

    Dear Patvin
    BASIS consultant is the one who helps in your project for authorization
    related,transporting related.
    See the problem which you are facing is due to authorization ,so a BASIS
    consultant can solve this issue,or just convey the same to your Team Leader.
    The problem is for that T code you can not deliver from Shipping point 1234,you
    can try for some other option.
    Regards
    Mangal

  • How does IDM takecare of Authorization issues

    Hi All,
    I am pretty new to IDM product. I am aware that using IDM we can automate user creation and role assignment, also with 7.2 we have password self service available.
    However i will like know whether IDM can also be used for regular authorization issues i.e., let say a user is facing an authorization issue in a particular tcode, in order to solve this issue we need to assign additional field values in one of his roles. will such issues where user id is already present and roles also assigned to that id but some changes to his roles is required be taken care by IDM.
    I couldn't get this info from Master and solution operation guide of IDM  7.2, so thats why i am posting it here.
    Regards,
    Siva.

    Hello - No IDM only manages the abap roles ie provisioning and deprovisioning. If the user requires additional authiorization and a role exists to solve this then this role can be assigned from IDM. However if you need to add extra values to a role this still needs to be done using PFCG.
    Hope this answers the question.
    Chris

  • Secured WebDAV Mounted Volume Authorization Issues

    I use a secure WebDAV mounted volume from myDisk.se and up until the latest Security Update have had zero issues being able to manipulate files and folders as I would on a normal volume. However, since the installation of the Security Update (2009-004 (PowerPC) 1.0) I find weird things happening with this mounted volume:
    1) I am able to mount the secured WebDAV share using my security credentials.
    2) I can create a default "untitled" folder but when I try to change its name, the WebDAV authorization dialog pops up and despite entering the same credentials (why, I am not sure as the volume has already been properly credentialed in order to be mounted), access is denied.
    3) Trying to create a file within a folder on the mounted WebDAV volume I previously created pre-update causes the same authorization issue.
    I have no other WebDAV shares I can try to mount from any other companies so I am not sure if this is a myDisk issue or one borne from the Security Update. I am not a .Mac/MobileMe user and that info is not filled out in System Preferences. The internal hard drive has been meticulously maintained with Disk and Permissions repair being run both before and after each and every software update installed. Likewise, the volume's structure is also checked both before and after and shows no need for repairs.
    Any ideas? Perhaps there is a corrupted file somewhere that's affecting the authorizations needed by this third-party WebDAV volume?
    The machine that has this problem is the last model iBook G4/1.33GHz 12" display, 1.5GB RAM, and a 100GB 5400rpm HD which replaced the stock OEM 40GB 4200rpm drive about one year ago.
    I'm not willing to do an Archive and Install at this point as the loss of the WebDAV access to my online volume is not critical. Inconvenient as heck but not to the point where I'm willing (or able) stop my normal work to spend the hours it will take to get WebDAV access back.
    Thanks in advance for any insights.

    same problem here with webdav, I can't mount my idisk from university network on Mac Pro 10.5.3 (although it mounts fine from home network on both ibook and PMG5 10.5.3). Everything was fine with 10.5.2 and I already re-installed 10.5.3 combo. Other bugs as well with .Mac prefs (keeps crashing, sometimes it shows the available space on idisk but still no mounting, with error -35 or -8086), but .Mac sync is OK
    Jun 11 12:34:21 webdavfs_agent[579]: mounting as authenticated user
    Jun 11 12:34:22 kernel[0]: webdav server: http://idisk.mac.com/[username]/: connection is dead
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 received VQ_DEAD event (32)
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 type 'webdav', mounted on '/Volumes/[username]', from 'http://idisk.mac.com/[username]/', dead
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 found 1 filesystem(s) with problem(s)
    Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
    Jun 11 12:34:52: --- last message repeated 1 time ---

  • BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

    Hi All,
    This is regarding BI 7.0 Analysis Authorization issue.
    Overview:
    we have restricted some queries at infoobject level.
    Issue:
    a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
    b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
    c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
    d.  Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
    e. But when we execute the same report with Auditors ID then we get a blank page.
    Any idea why this is so?

    Hi Neha,
    I tried the below also,
    GL Acnt
    I EQ 0000134010
    I EQ :
    but still it didn't work.
    No Infoobject is missing in Authorization Object.
    For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
    As mentioned earlier also it is giving me the below message,
    ""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION                                                                       RS_EXCEPTION        301CL_RSR_RRK0_AUTHORIZATION                         AUTHORITY_02"
    Kindly suggest, since this is a show-stopper for us!
    Thanks,
    Ishdeep Kohli.

  • Variable screen/variant screen authorization issue

    HI All,
    We have implemented standard Cost Center Overview Report(0SR_C02_Q0002) in BI 7.
    We have three selection fields:
    1.Company Code which is mandatory
    2.My controlling Area which is also mandatory
    3.Costcenter which is not mandatory
    The requirement we are facing over here is that in the Variable screen/variant screen when I enter a company code, then I need to display dynamically only those "My Controlling Area" values which are assigned to that particular company code and not all. In the same way after selecting the appropriate "My controlling area" value, I need to display only those cost centers in the cost center selection field which are assigned to the selected company code and My controlling area combination and not all.
    can anyone guide me on how to go about on this authorization issue at the variable screen itself.
    Please treat this issue/requirement on high priority.
    Appreciated in advance.
    Regards,
    raps.

    Hi,
    I think that an alternative to solve your concern could be using Web Application Designer (WAD).  In this respect, there are several design options, with different levels of complexity.
    As the simplest alternative, you could create a WAD including your query and three Dropdown Boxes: one for Company, a second for Controlling area and another for Cost center.  The four mentioned elements should be linked to the same dataprovider so, when you select a company, the options in the other two Dropdown boxes and the information in the query are updated.
    In order to enforce mandatory filter selection at Company and Controlling area level, you should set NO_REMOVE_FILTER='X' in both two Dropdown boxes, so that "All values" option -which would mean no filtering- is not offered.
    I hope this helps you.
    Regards,
    Maximiliano

  • Authorization issue - help request

    Hi guys,
    One of the consultants is having an authorization issue ( He is not abele to run a t-code)
    I ask him to run a su53 report and i am not sure how to proceed with this.
    Please help.
    Here are the details from the SU53 report.
    DISPLAY AUTHORIZATION DATA FOR USER VYXXXX
    User : VYXXX                       profile parameter authorization buffering    4
    Authorization Object: F_KNA1_GRP
    Description
    Authorization check failed:
          + Authorization object F_KNA1_GRP Customer Account Group Authorization
                Activity                                08
                Customer Account Group     ZM01
    Users Authorization Data :
          +  Authorization object F_KNA1_GRP Customer Account Group Authorization
                   Authorization  T-PD19002300
                  Authorization  T-UG39000900
                  Authorization  T-UG39001000
    Please help me guys what need to  be performed.
    Regards,
    Vamsi.

    Hi Vamsi,
    SU53 shows us the last failed authorization for a user. However, it might not only be the failed authorization object failed.
    Hence, "just to learn" , you can use transaction ST01 to enable and run a trace for particular users. Be sure to use in a test environment first, and with proper filters. (for a particular user only).
    Then check-> which auth object is failing.
    RC=4 means a object value is failing.
    RC=12 means an object is missing!
    Check, which tcode is calling that object and this tcode is present in which role. Then.........proceed.
    You can check the SAP documentation on running traces on the help portal of SAP.  I think you will find the answer yourself by troubleshooting more and may be massaging some test roles here and there!
    Likewise, if you are new to security, I would encourage you to start by reading some books on SAP security. Authorizations made easy is a good book to start with.
    Let me know if you have any questions
    EOD for me :P . take care
    Abhishek

  • Authorization issue during Jump

    Hi all,
    I am faced with an authorization issue when I am jumping from a BW report into an ABAP report in R/3. The particular BW report is built on a Multiprovider and when I jump to the R/3 report it displays a message saying that I have no authorization to display the R/3 report. Now the issue is that when I run the same report on the base infocube and perform the jump there is no problem. It works just fine.
    Both the multiprovider and the base infocube have the same authorization objects checked.
    Can someone please help?
    Regards,
    Ashmith Roy

    Pls have a look on the below thread:
    Authorization by InfoArea
    Regards
    Ganesh
    *Assign points if this helpful

  • Authorization issue in Info spoke

    Hi all,
    I am facing some authorization issue when executing info spoke in process chain.
    Info spoke is working fine in direct Scheduling (both background and Dialog).
    Am getting this error after execution of process chain
    "System error: RSDRC / FORM AUTHORITY_CHECK RSDRC / FORM AUTHORITY_CHECK R"
    "System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET RSDRC / FUNC RSDRC_B"
    "System error: RSDRC / FORM DATA_GET RSDRC / FORM DATA_GET RSDRC / FORM DA"
    "Extraction Cube : Error in DataManager API".
    I dont know why this problem comes.
    Can anyone tel me what went wrong and how to solve it.
    Thanks in advance.
    Kind regards,
    Shanbagavalli.S

    Hi All,
        The above issue is getting due to # character in text at end(e.g ljdfsaa##). After removing # characters in text issue got resolved.
    Thansk,
    Manjunatha

  • Authorization issue after the Support packs upgrade

    We're having problem on authorization issue after the SP upgrade.
    One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
    And the SU53 showing problem on S_TCODE FAGLL03.
    How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
    Thank you in advance.

    How can i send you the trace file? What is your email address?
    If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
    Anyhoo... (copy right @ David)
    What are the objects been caught in category RC=4, RC=12?
    Relate them with functional aspect of the transaction (error screen)
    Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
    Regards,
    Arpan Paik
    Edited by: P Arpan on Aug 23, 2011 2:36 PM

  • Authorization issue - need to know the Role providing this access

    Hi,
    User is facing an authorization issue below:
    "You donot have authorization to display DataSource 2LIS_06_INV, Component MM" and
    "You donot have authorization to display DataSource 2LIS_11_VAITM, Component SD"
    Kindly let me know what Role is missing from the user's profile?
    Thanks and Regards,
    Sachin
    SAP Security Consultant

    Hi Murali,
    It helped.
    I found out the BW Data Support role for the object S_RO_OSOA and when checked it was already in user's profile but the missing part was user Comparision for that role.
    I did user comparision and then user is able to view the below DataSources....
    Thanks for your help, it triggered to find the root cause.
    Thanks
    Sachin

  • Authorization issue to execute query via analyzer

    Dear,
    We are experiencing an authorization issue that we can not solve...
    We have grant to user the expected objects to execute query (S_RS_COMP & S_RS_COMP1) and the central objects like S_GUI, S_USER_AGR.
    When we test in RESCEADMIN, everything is fine. We can execute the query.
    When we test it in the analyzer, the variable screen does not pop-up and we get the error message:
    "There is no variable in the workbook, which allows user input"
    Does anybody have a direction to help us to orientate our investigation?
    Many thanks,
    Rodolphe

    Hello,
    What is the basic settings you have in the Query Properties basic setting tab
    Try making it mandatory
    Regards
    Nitin Bhatia

Maybe you are looking for