Lead Selection takes a long time

Hi Experts,
I have an ALV table in my component that has a lot of fields i,e 82. When ever i try to do a lead selection on the alv the system takes a lot of time to do the action even though there is no code that was written to run on that action (and i have implemented the first time check in modify view so there is no chance of this running either). Someone please let me know how i can reduce the time of lead selection in my ALV.
Thanks In Advance,
Chaitanya.

Solved on my own , it is a result of large no. of attributes in the node.

Similar Messages

Takes a long time to select a files when importing files

When I am selecting a files through the import function, it takes a long time (sometimes 5 minutes) for the computer to allow a file to be selected. I have just reformat the drives and did a fresh install of all application. I am running OS 10.4.4 on a G5 2.7. This happens irregardless whether I am selecting a file on an external drive (Firewire 800) or internal drive. Any clue, anyone? please help. Thanks

What are you importing?
Shane

Filter value selection in Queries takes a long time

Hello BW gurus....
I have a problem here. When a user tries to run a consolidated query it takes a long time. what are some of the performance tuning that can be done. My other issue is that once the query is run and the user tries to change the filter values say hes trying to restrict Cons group it takes like 30 min for the options to come up or even more than that and eventually fails. Is there any thing which i can do to improve the performance of these filter value selection option. we are on portal EP 6.0. I know this has nothing to do with interface but the crux of the problem is in the back end.
Any help is really appreciated
thanks
SG

The Only Posted Values in Navigation generates a query that must examine most to your cube to find all filter options that correspond to your query. If the cube is large and you don't have much in the way of other restrictions, this can take a while. The benefit of this option is that the user is only presented with filter options that are in the domain they are interested in.
If you switch to either of the other options, the filter options are quickly deteremined by examing either the dimension or master table. The downside is that those filter options may not be in the data the your query would exclude, e.g.
Lets say you have a query on Bus Area and Cost Center.
- Master Data for Cost Centers = 0001 - 9999
- Cost Centers in your data are 0001 - 2999
- Only Cost Centers 1000 - 1099 in Bus Area 10.
If you have an input variable to select only Bus Area = 10 and run the query, then want to filter on Cost Center:
- with Only Values in Navigation, the user would only see Cost Centers 1000 - 1099 in the filter selection list.
- with Only Values in InfoProvider, the user would see Cost Centers 1000 - 2999.
- with Only Values in Master Data, user would see 0001 - 9999.
This may or may not be acceptable. If a user chooses Cost Center 2000, the query would copme back with No Available Data since ther are not transaction with Bus Area = 10 and Cost Center 2000.
Now lets say you are using CALMONTH, chances are the user would understand that if they select a November of 2006 while in August, they wouldn't get any data. They might understand what Cost Centers to expect back in Bus Area 10, but they may not be as familiar with all the values for all Characteristics.
Like everything else, there are pros + cons.

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Firefox takes a long time to load, even with add-ons and auto-update disabled

When opening firefox it takes a long time (1 minute +) to load. The computer does not display any indication that firefox is loading (often leading to 2, 3 or 4 instances of Firefox trying to start due to my impatience).
My OS is Windows Vista 32 bit
Firefox is v4.0.1

Can you check your Windows Firewall settings? It's possible that it's routing Firefox requests differently. At least one other Firefox user has reported that his Windows Firewall was set to block Firefox 3.6.

My mac takes a long time to log on, running slow

my imac is running slow & takes a long time logging on, anyone knows why this happens?

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Takes a long time to write email

I am using windows 7, internet explorer 8.1 .
It takes a very long time to write an email, each letter typed, it takes a long time
to appear on the page sometimes it don't appear..
Please help

Hi,
This could be also related add-ons.
Add-ons are apps that browsers use to interact with web content like videos and games. Incompatible or out-of-date add-ons might cause Internet Explorer to run slowly, crash, or prevent sites from displaying correctly. You might want to turn off all add-ons,
and then turn them back on only as you need them.
1.Open the desktop, and then tap or click the Internet Explorer icon on the taskbar.
2.Tap or click the Tools button Tools button, and then tap or click Manage add-ons.
3.Under Show, tap or click All add-ons, and then select the add-on you want to turn off.
4.Tap or click Disable, and then tap or click Close
If issue persists, let’s try to reset Internet Explorer settings.
http://windows.microsoft.com/en-in/windows7/reset-internet-explorer-settings
Alex Zhao
TechNet Community Support

Outlook 2010 takes a long time to open emails with embedded images

Hello,
outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML email messages or RSS tiems" is not selected.
it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
When I open the same message in OWA no delays at all.
I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
Any ideas?

Hi Aprylmsx,
According to your description, I recommend you refer to the following methods to troubleshoot the issue:
1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
In addition, How many users encounter this issue? a lot or just only you?
Best regards,
Niko
Niko Cheng
TechNet Community Support

F4 Process takes a long time to show the values

Hi gurus,
We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table.
This infoObject is being used in a Query (3.X version) and when we press the F4 to obtain the values, it takes a long time to show them.
The query takes data from a Multiprovider, and the multiprovider only has one Cube.
The issue is happening with a lot of query (obviosly, with the same object), and there is no reason to do it I think, because the amount of records is not too much (10 K rec).
So, what do you think is happening? all your help will be helpfull.
Regards, Federico

Frederico / Rob,
setting the InfoObject property of 'Query execution filter value selection' to 'values in master data table' has the consequence that it is indeed faster on the query selection screen, but then when selecting filter values after the report has been displayed is not restricted to the values in the report results - again all master data values are shown for selection. This is not acceptable to our users.
Ideally, I would like to see two settings for query execution - master data for the initial selection screen, only posted values for navigation after the query has been executed. But I doubt that's going to happen.
In BW3.5 I seem to remember that you can set the choice of F4 display within the web template (can't in BI7).
NB for BI7 Java execution, examine the 'order for F4 help' on the InfoObject attributes and remove most of SAP's default settings. This will speed things up a little.
David

HT1222 I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

open inbox
tap Edit on top right of list.
tap each email to check it off. Then tap trash. then 'trash selected mesages"
done

Having moved my Itunes folder to external hardrive and resetting where it is in preferences Itunes can't find them and I have to direct it to every song - I have a months worth of songs on there so this will take avery long time - any ideas on what;s up?

Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences Itunes can't find them and I have to direct it to every song- a little ! pops up next to the song and a dialogue box says Itunes can't find it so thn i have to manually search for it - I have a months worth of songs on there so this will take avery long time - any ideas on what's up?

nellydee wrote:
Having moved my Itunes folder to a new external hardrive and resetting where it is in preferences
That's not how to do it. You don't move stuff then set the iTunes prefs > Advanced.
Once you move the /iTunes/ folder, hold Option, launch iTunes and select Choose library... and select the ITunes folder on the external.
This will use the iTunes library file in the iTunes folder you moved.
Don't change iTunes prefs > Advanced.

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Printing tables takes a long time

Hi,
I am using the printerJob.printDialog() to print tables (I implemented a print method).
The problem is that when the table has many entries printing takes very long time (printing table of 100 entries might take a couple of minutes).
I am using the SwingWorker when printing in the following way:
final SwingWorker worker = new SwingWorker() {
    public Object construct() {
        try
            PrinterJob printerJob = PrinterJob.getPrinterJob();
            printerJob.setPrintable(printable);
            if (!printerJob.printDialog())
                return 0;
            NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.WAIT_CURSOR));
            printerJob.print();
            NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
            JOptionPane.showMessageDialog(NMSMainWindow.getInstance(), "Printing completed successfully", "Print", JOptionPane.INFORMATION_MESSAGE);
        catch (PrinterException pe)
            pe.printStackTrace();
            NMSMainWindow.getInstance().setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
    return 0;
worker.start();My question is: Is there a way to send a print job in the background, but in the meanwhile, while it is being processed, keep on working?
Thanks,
Efrat

Edit init<sid>.ora
and add the following line
_fast=true
Seriously, you need to run the normal selects to find out 'what it is waiting for' and/or run statspack.
Information about this can be found on the websites you so far avoided to use.
And Cost Based Optimizer is not supported for SYS in 8i.
Sybrand Bakker
Senior Oracle DBA

In attempting a slide show in PSE 08 w/275 pics, PSE warns .. take a long time, sends me to Bridge.

I am attempting to create my first slide show in PSE, version 08. I have a Mac OS with 199.03 GB available. I have selected and organized 275 photos. When I select "PDF Slide Show" under the CREATE option, I am warned twice that it will take a long time. Then I am sent over to Bridge where these photos appear, all organized. Nothing happens. Is there something going on in PSE that takes a long time and I cannot see?

You can't do any of that in the mac version even if you have 2 photos. The so-called slideshow is basically a multipage pdf document that displays transitions as it turns pages. That's it.
EDIT By "turns pages " I mean "changes from one page to the next".

Lead Selection takes a long time

Similar Messages

Maybe you are looking for