Lead Software Development Engineer Available Position
Lead Software Development Engineer
We seek a Lead Software Development Engineer interested in a rewarding career in a fast-paced, team environment. The purpose of this role is to develop custom National Instruments (NI) software solutions.
Essential job responsibilities include, but are not limited to the following:
Work with customers and vendors to specify, procure, and manage the design/delivery of data acquisition and data management systems
Manage vendors and sub-contractors during installation and commissioning phases of software implementation projects
Assist in the development of proposals for new business by supplying and researching cost data and technical information
Support software development for specific external client projects through planning, design, programming, implementation, and technical support
Integrate measurement systems, data logging, and analysis packages
Ability to work with mechanical, controls, and fabrication groups to design and build custom hardware and components required to support testing projects/processes
May have opportunities to assist with specifying, procuring, and managing the design/delivery of data acquisition and data management systems
Assist with the development of sales and marketing tools to promote the Software Development Group to new and existing clients
Assist with the proposing, setup, budgeting and management of ACS service offerings in the area of data acquisition and management solutions
Help provide training, mentoring, and feedback to other employees in regards to proper engineering methods and processes as necessary
Additional duties as assigned
Basic requirements include:
Bachelor’s and/or Master’s Degree in Mechanical Engineering, Electrical Engineering, or related degree
Minimum 5 years applied work experience with NI technologies, specifically LabVIEW
NI LabVIEW CLD or willingness to get certification
Full life-cycle application development and deployment experience required
Preferred experience with the following software packages: Veristand, TestStand, Inertia, Driven, DIAdem
Proven record of excellent client service, including balancing multiple internal/external projects and responding to changes in deadline, scope, and design
Preferred experience with the following hardware platforms: cRIO, cDAQ, PXI, FPGA and other NI-based hardware platforms
Experience in application automation of PLC, HMI, sensors, and instrumentation preferred
Demonstrates good technical writing and oral communication skills
Ability to travel to customer facilities (25% - 75%) nationally and overseas, travel may take place for more than a week at a time
Must have the following personal skills and characteristics: Problem solving skills, strong organizational and time management skills, team player, takes initiative to improve personal skills, strong interpersonal skills, ability to work effectively with all internal and external levels and groups
ACS is a Madison, WI, based company that provides integrated design, construction, and operations solutions for complex facilities, systems, and equipment. ACS focuses our expertise on taking a project from conception to completion with our unique streamlined turnkey delivery methods. Our core markets focus on projects relating to science and technology, engine and vehicle testing, and consumer and commercial products.
If an exciting career opportunity with a growing, entrepreneurial company appeals to you, please apply immediately. We offer an excellent salary, bonus and benefits package. For a full overview of our organization, visit our website at: http://www.acscm.com
Please apply through our website at: http://www.acscm.com/Careers/AvailablePositions.aspx
EOE/AA
dear sir,
iam indumathi, having expereience about 1.8Years i electronics field.
i am interested in this job. i have aatched my Cv , kindly consider me.
looking for your reply
with regards,
indumathi.s
Attachments:
indumathi CV.doc 69 KB
Similar Messages
-
Software Development Engineer
Hysitron, Inc. is a premier scientific instrument manufacturer. Founded in 1992 with headquarters located in Eden Prairie, MN we are committed to promoting nanotechnology by developing advanced transducer and control technology. This leadership has made Hysitron the world leader in nanomechanical test instruments. The TriboIndenter®, TriboScope®, Ubi, and other Hysitron innovations have opened new horizons for scientists interested in investigating and understanding mechanical properties of materials at nano-scale. Hysitron fosters an environment and culture where innovation flourishes, teamwork is encouraged, and superior performance is rewarded.
Hysitron invites applications for multiple software development engineer positions from those aspiring to explore and succeed in the nano world. Hysitron, Inc. is an Equal Opportunity Employer M/F/D/V
Job responsibilities
The software development engineers would be responsible for developing test and measurement software applications for nano-mechanical testing instrumentation. Job deliverables would include:
- Develop software applications in C based Labwindows CVI for Hysitron Instrumentation
- Support the development of applications to address challenges in instrument automation and control
- Test software applications using debugging and simulation tools
- Perform software releases and software quality assurance activities
- Participate in the design of new software products
- Perform maintenance activities for existing products
- Adapt and deliver on quality software development practices
Minimum qualifications
- BS in Computer Science/ Computer Engineering/ Equivalent Scientific or engineering discipline
- Min of 3 yrs experience in Instrumentation software development in an industrial or R&D environment
- Expert at programming language C, knowledge of C++
- Working knowledge of various communication protocols, e.g. USB, RS232, IEEE, RS485, TCP/IP, Modbus
- Knowledge of general software design/documentation processes in test and measurement systems
- Proficient problem solving skills
- Strong analytical and technical skills
- Excellent communication and interpersonal skills
Preferred Qualifications
- Proficient with LabWindows CVI and XML
- Working experience with DSP(Code Composer Studio) and/or FPGA level programming
- Exposure to digital electronics and instrumentation
- Working experience in Robotics interface programming
- Experience with Controls/Automation engineering
Application and Information
Qualified candidates should send a letter of application and their resumes to (please include ‘SW Engineer’ in subject line):
Hysitron, Inc.
10025 Valley View Rd
Eden Prairie, MN 55344 USA
Phone: (952) 835-6366
Fax: (952) 835-6166
E-MAIL: [email protected]
Web: www.hysitron.comThis position is still accepting resumes/CVs.
-
I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
If you would like to meet during NIWeek and/or request my resume please email me at [email protected]I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
I am a consultant and I am currently available for contract work.
I have done the things you describe as experience you would like to have.
I have attached a "Fact Sheet" which describes some of the systems I have built.
You will notice that I am experienced with developing hardware systems and controls as well as software systems..
I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
If you are interested in discussing this further please call or email me.
Tom Moser
ForMost Systems
North Canton Ohio
330-470-0404 begin_of_the_skype_highlighting 330-470-0404 end_of_the_skype_highlighting x202
email: [email protected]
Attachments:
IS 071410a .pdf 253 KB -
Looking for a Software/Test Engineer position
Hello, I am looking for a Software/Test Engineer position in London or abroad.
I worked on several projects with Labview and National Instruments hardware (Acquisition and Generator cards).
Please refer to my CV and my LinkedIn profile for additional information.
uk.linkedin.com/pub/jean-félix-majurel/5a/223/a14/
Don't hesitate to contact me for an opportunity.
Best regards,
Jean-Félix Majurel
Attachments:
CV.pdf 316 KBHello DocJ,
We are located far north of Chicago in Gurnee, IL and are accepting resumes for a LabVIEW position. Please send your resume to [email protected]
Thanks -
Software Developer position based in LAS VEGAS METRO
Small company in the Las Vegas Metro area seeks a LabVIEW Software Developer.
The LabVIEW Software Developer overview:
The LabVIEW Software Developer position is responsible for developing and troubleshooting LabVIEW software developed for our proprietary hardware.
The chosen candidate will:
Develop a deep and broad understanding of our tools and products;
Develop in-house tools to track customer requests;
Take ownership of problems and see them through to successful resolution;
Duties and responsibilities:
Provide troubleshooting and solutions for existing software releases;
Work with product engineers to identify and resolve technical software problems, and some hardware problems;
Involved in developing new features and tools;
Document frequent issues into scripted processes; create FAQ;
Document required bug fixes, end-user feature improvements, and operations feature improvements;
Troubleshoot problems and solve the incidents through a methodical and process based approach;
Develop User feature notes for customers; create FAQ;
Commit and contribute to a high level customer satisfaction by providing best in class Support and Service;
Occasional week night or weekend work may be required depending on release deadlines;
Qualifications:
Bachelor degree or equivalent work experience in computer science, electrical engineering, mathematics or computer engineering;
2-5 years experience solving deployment and support issues is an asset;
Experience with RF a plus;
Good general computer knowledge with a strong aptitude for problem solving;
Experience in software engineering for test platforms or real-time software engineering;
Able to read engineering design documentation (mechanical, electrical or software);
1-2 years minimum practical experience with LabVIEW programming;
Comportments/ Behavior:
Ability to quickly learn systems;
Pro-activity, autonomy, self motivated individual;
A “can do” attitude;
Diplomacy, open-mindedness, and patience, great listening skills;
Ability to develop well written documentation;
Excellent oral and written English communication skills.
Candidates must have the legal right to live and work in the US.
This is a full time, direct hire position.
Position is based in Las Vegas Metro area. Relocation is not provided.
Please send your resume, cover letter and salary requirements to: [email protected]Intaris wrote:
If I was still living in Ireland, I'd jump at this.
Shame.
Shame indeed Shane?
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
Software Test Engineer in Palm Bay, Florida LabView
I am looking for an astute individual to fill an
opening I have in Palm Bay, FL with a leading defense technology
company that specializes in mission critical systems. This is a
DOD operation and does require US citizenship. This is a
permanent position and I'm looking to pay in the 65K - 75K range.
There's is no relocation package available and interviews can be done
over the phone or in person. If you are interested in the
position please send a resume to Alan at
[email protected] Also any questions or comments can be sent to
that address as well. I have listed a brief description of the
position below.
In this position you support the test station development for Windows
XP/Win2000/NT based test system. Implement test equipment control and
communication software used to gather performance data. Perform
engineering activities as required under direction of lead software
engineer to include algorithm definition and implementation, coding,
reviews, documentation and problem analysis.
B.S. Degree in a related engineering
discipline, CE, CS, EE, and related experience. Experienced with
engineering methods and practices used in full product lifecycles
within a structured development organization. Experience and
Demonstrated skills with: MS Visual Studios 6, Visual C++, Visual
Basic, National Instruments LabView 6.x 7.x, LabWindows 5.x 6.x 7.x,
IMAQ. Additionally, you should have experience with Componentworks,
Analog Video processing, Digital Video processing and Protocols such as
GPIB Communications, Serial Communications, RS-485 and RS-170 Video DataHi,
I am Vikram Malik having full time working experience of 2yrs 5months
in Software
Testing. During this period I was involved in Testing Application ,
Web based projects and Client specific projects. I have an Onsite
Experience (UK) of 6 months in the same field .
Involved in : Manual Testing , Black Box Testing. Also having knowledge
of Testing tools.
Performed various types of testing : Integration Testing , regression
Testing , System Testing , Functional Testing etc.
Thanks,
Message Edited by Support on 12-03-2007 08:27 AM -
LabVIEW Software Developer/Hardware Integrator
La Jolla, CA based automation and custom solutions provider seeking LabVIEW software developers.
Job Description
Seeking a National Instruments LabVIEW Software Developer/Hardware Integrator to join our team developing customized automated control and test equipment.
The preferred candidate will have 1-5 years experience in software development and hardware integration using LabVIEW and some experience with embedded C. Candidate must have hands-on experience interfacing and calibrating various transducer signals to both National Instruments and Third Party data acquisition boards.
Software Experience
Programming experience with an understanding of a majority of the items below:
Labview Programming 1-5 years
GOOP/LVOOP
Database Connectivity
RS232 and USB COM programming
Real Time Systems
AIO, DIO, Counter Configuration and Operation
Producer/Consumer Architecture
Queues, Events, Timed Loops, Objects, Multithreading, Hardware Triggering, Variants, Code Interface Nodes, PID
ActiveX, DLL APIs
LabVIEW Application Deployment (building and deploying executables)
*A preference will be given to candidates who have experience in both NI Data Acquisition hardware and Embedded Arm Development.
Hardware Experience
Candidates will have demonstrated experience (or at least a basic understanding of) in the integration of transducers and signal conditioning commonly used in Biomedical/Biotech industries into data acquisition and control systems including but not limited to:
Temperature (TCs, RTDs, and Thermistors)
Photodiodes
pH,DO,ORP Electrodes
Liquid/Gas Valves
Liquid/Gas Pumps/Compressors
Motion (Stepper and DC Servo) including Quadrature Encoders
Pneumatic displacement cylinders
Lighting (Bulbs and LEDs)
Solid State and Mechanical Relays for AC/DC power switching
Thermoelectric Coolers
Digital Switching and Bus Communication (DIO, SPI, Counter, Triggering, etc.)
Education
Some college-level experience in Electrical/Computer/Optical/Bio/Chemical Engineering and/or Computer Science. A formal degree is not as important as capabilities and creativity. Previous Experience with National Instruments LabVIEW Training is highly desired. Understanding of AC/DC circuit basics is a requirement and a preference will be given to candidates with more component level electronics experience.
Positions
We have both part-time and full-time positions available in our La Jolla, CA office. We are a company specializing in the development of custom automation solutions for various clients primarily in the Biotech/Biomedical/Oceanography areas. We are a small, but growing company looking for individuals who like a diverse work environment filled with unique challenges that are constantly changing.
If you enjoy using your creativity and talents in a fun entrepreneurial environment and like the idea of working in the beautiful surf-town of La Jolla, CA then we want to hear from you...
www.labviewautomation.comHey, I own a Canadian built sailboat, drink the occasional Canadian beer, watch CKWS on cable, can say Eh! with the best of them, had my first anniversary honeymoon in Ottawa. I even have a loonie in my pocket and $5cdn in my wallet You have to be Canadian? Winters are milder there than where I live too.
Fixed wire, that is for those posters in the other threads that insist on posting for the 3 -4 year old jobs! How else will he get them to apply in a timely fashion?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Job opening in Ottawa: Teststand test software developer. Permanent postion
Averna is an expert in the design and manufacturing of high performance test solutions used by R&D and hi-tech manufacturing companies worldwide. Our goal is to improve and optimize their engineering, production and repair activities. Our solutions accompany our customers through the lifecycle of their commercialized products, from design simulation and software load validation to product functional test and post-delivery troubleshooting and repair.
Responsibilities:
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers to obtain accurate measurements and results.
Requirements:
University degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
2 to 5 years experience in software development with Teststand (preferably CTD)
Experience in software development with C# or VB.Net is an asset;
Knowledge of LabVIEW (Preferably CLD) is an asset;
Knowledge of the manufacturing environment;
Be comfortable with clients;
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
To apply:
Please send your resume to [email protected] and mention the title of the position and the code: NI-Teststand-OT.
We will like to thank you for the interest towards Averna, please note that only those candidates being considered for the position will be contacted.Sir,
Have sent you my CV. Please do check & revert..
Contact No: 9768773040
Regards,
Shilpa.M -
4D Technology is looking for a software/controls engineer with a strong background in LavView
Software/Controls Engineer
Do you want to work on cutting edge technology? Are you the type of person who keeps up with new software and hardware technology in your spare time? If so, 4D Technology, a worldwide leader in innovative optical metrology products, has a position for you on our engineering team.
4D is currently looking for a self-motivated Software/Controls Engineer to lead efforts in automation, image acquisition and data processing across several product lines. A successful candidate must demonstrate strong skills in software engineering and hardware interface. The ideal candidate will have experience with LabView, C or C#, image acquisition, hardware motion control and a strong commitment to producing quality products. This is a chance for you to be part of a diverse team delivering internationally recognized, innovative products, to learn new skills under the guidance of expert engineers, and to feel valued for your passion in delivering innovative, quality hardware and software.
The essential responsibilities of this key position are:
Rapid prototyping of hardware interfaces (motion control and image acquisition), data analysis algorithms, and GUI’s
Architect, code and release automation hardware and software for custom products and applications
Enhance and maintain existing LabVIEW and C applications
Produce production line testing tools.
Our team needs your enthusiasm and dedication to help us grow. We require a B.S. degree or higher in Engineering, Physics or Computer Science. The following skills and traits are highly desirable:
Experience with hardware interfacing, motion control, image acquisition
Solid knowledge of object oriented software design
Proficiency with LabVIEW
Experience with C#/.net and C++
Experience with embedded processors, PCB layout, electrical design
4+ years of practical work experience in engineering
Capable of working both independently and as part of a team
Excellent written and oral communication skills.
This is an exciting opportunity to be part of successful and motivated team. If you’re looking for a job that encourages creativity and innovation and you derive personal satisfaction from seeing your hard work result in commercial products that are used throughout the world, this is the place for you. Located in Tucson, Arizona, 4D Technology offers competitive a salary and a comprehensive benefits package.
Reward yourself with one of the best moves of your career. Send your résumé to:
Director, Human Resources
4D Technology Corporation
3280 E. Hemisphere Loop, Suite 146
Tucson, AZ 85706
FAX: 520-294-5601
or email résumé to: HR @ 4dtechnology.com.Hi sir,
I am currently working in a MNC, as an engineer. I am keenly interested in Labview, and i know basics of it.
Attached is my resume. I would like to work with Labview.
Regards,
Pooja karnani
Attachments:
RESUME.docx 30 KB -
Test Development Engineer - at Gentherm
As a leader in thermal technology, we design, develop and manufacture heating, cooling and ventilating devices for diverse global markets. With our employees, we pioneer and shape markets for cxomfort devices while seeking new ways to drive value for our customers.
Test Devleopment Engineer position:
This person is responsible for the design and integration of subcomponents into various test equipment for automotive applications. This person is also to define the test specification for Electronic Control Units in order to write test specification, train test engineer at plants and support tester installation at plant.
Please see the attached posting for detailed information on job posting.
Attachments:
Test Development Engineer.pdf 123 KBBrent,
Is this position still open?
If so who do we post our resumes to?
Regards
Kris -
Software Design Engineer - UTC Power
Software design engineer for the design of software and control systems used in fuel cell stack and power plant test equipment.
Responsible for conceptual control logic, software design, software / hardware interfaces and controls hardware selection. Tasks include the planning, design, installation and documentation activities necessary to develop and maintain test equipment control software.
A thorough understanding of National Instrument's LabView software and its use in automatic or dynamic controls is required. This includes the use of LabView software to control electro-mechanical components, acquire, store and manage data using real time control systems. Experience with PLC programming is also desireable.
This position involves close interaction with numerous engineering disciplines and hourly functions. Ability to work in a team environment is a must. Applicant must be comfortable in a fast paced, dynamic work environment. Participation in FMEA's, HazOp's, EH&S reviews, failure investigations, and the training of hourly test operators will also be required.
Bachelors degree in Electrical or Computer Engineering
2 - 5 years experience in product development evaluation and testing.
Send resume to Mr. Joseph P. Haley
Manager, Software & Controls
UTC Power
195 Governor's Highway
South Windsor, CT 06074
[email protected]I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected] -
In need of a Software Developer for a Photoshop Plugin / Extension
I'm in need of a software developer that can create a plug-in or extension panel for Photoshop, according to my instruction.
Is there a list of developers available from Adobe?
Are you a software developer that can help? Please let me know.Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4. -
Java Software Development Kit (SDK) for Java 6 on Leopard.
Does anyone know if the Java Software Development Kit (SDK) comes with Leopard, or if one needs to sign up for an Apple developer account to obtain it?
I typed the following command on the Terminal command line:
javac
The output of that command was:
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath <path> Specify where to find user class files
-cp <path> Specify where to find user class files
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-d <directory> Specify where to place generated class files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-version Version information
-help Print a synopsis of standard options
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime system
I would like to use Java version 6.Hi John,
I sort of remember Java 6 being IntelMac only...
Once you’ve gotten logged in, go to Downloads, select “Java” on the right hand side of the page, and download the Java SE 6 beta. Note: this is only available for Intel Macs running Tiger or Leopard — if you’ve got a G4 or G5, you’re out of luck right now
http://www.metaphoriclabs.com/articles/installing-java-6-on-mac-os-x/
But here they are...
http://ituploads.com/apple/macintosh-os-x-java-jdk/
Can I do Java 6 development in OS X?...
http://stackoverflow.com/questions/739418/can-i-do-java-6-development-in-os-x -
INVITE: Software Developer Conference (March 24, 25. Bangalore)
Hello
India Software Developer Conference
Inviting all Programmers/ Software developers, Architects, Project
Managers and Team Leads for an exciting conference.
WHEN: March 24 & 25,2012 (Saturday & Sunday)
WHERE: Bangalore
TIME: 8.30AM to 5.00PM
Get to know latest trends in cutting edge technologies and how these
technologies impact your career path.
What's new in the world of Java, .NET, HTML5, Mobile, Agile and
Architecture
Covering 50+ Technology Sessions
Three interesting tracks: Architecture & Design, Development,
Enterprise at Scale.
Opportunity to learn from Industry thought leaders
Network with over 900+ Participants from developer community
Live demos and hands on sessions
Great line up of speakers from companies like
IBM,Microsoft,Infosys,Intuit,Oracle,ZOHO,Collabera,Dell,Capgemini,Vmware,TIBCO
Software,MindTeck,Citrix Systems,EMC,UST Global,HCL
Technologies,MindTree,Aspire Systems,Sencha
This Conference has something for everyone. Don't miss this
opportunity. Register NOW!
http://globeadsdat.com/events/India-Software-Development-Conf-Bangalore-INDIANSOFTWAREDEVELOPMENT_Ma...
Regards,
VeeruIm not sure if this is the right place to post this, but anyway thanks for the info :)
-
Software Development Management- How?
Hi There,
Does anyone know of a good way to manage software development (in
Labview)?
I've been the only programmer in Labview at my company, so tracking
software changes wasn't too bad. We recently hired a couple of
engineers who also program Labview. Now we're at a point where there
are many versions of the same software springing up. No one here has
any knowledge of software management tools available (except a
spreadsheet program, and a magnetic marker board).
Any links or suggestions are welcomed.
Kind Regards,
-Dorian
dorianjps_at_hotmail.com (change _at_ to @ if e-mailing me)Dorian Grey wrote:
>
> Hi There,
>
> Does anyone know of a good way to manage software development (in
> Labview)?
>
> I've been the only programmer in Labview at my company, so tracking
> software changes wasn't too bad. We recently hired a couple of
> engineers who also program Labview. Now we're at a point where there
> are many versions of the same software springing up. No one here has
> any knowledge of software management tools available (except a
> spreadsheet program, and a magnetic marker board).
A critical part of any source code management is the human level:
deciding which developer will touch what VIs! Then you choose a tool.
We use MS Visual SourceSafe and it works OK for 2 developers.
I've used it on my own for 3 years.
Availabl
e standalone or as part of Visual Studio.
I also know people at a systems integrator (NI Alliance member) who use
it. They still use it for control of up to 20 developers' work.
See its home page http://msdn.microsoft.com/ssafe/ and the best
practices page
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnvss/html/vssbest.asp
Best, Mark
Maybe you are looking for
-
How do I get my videos from iPhone to iPhoto? Photo Stream doesn't do it and they don't show up when I connect my phone directly to my iMac. Thanks
-
I upgraded to Leopard. I've been experiencing a series of crashes that I've traced to the M-Audio Firewire 1814 interface. I installed the combo updates for LEOPARD, and ensured I had M-Audio's latest drivers for the FIREWIRE 1814. Currently the M-Au
-
How many people here have had incidents where the Apple Bumper has scratched their phone? I'm asking this because I'm eventually going to order one but I need to know if this scratching problem is only in a small % of defective bumpers. Thanks.
-
Email Sales order link from SAP Work Place
Dear SAP Gurus, Well guys i have to mail the sales order link through the work place but its not working for the sales order. but its working for delivery order and billing document...so i want to know that why its not working? Regards, Mohsin
-
What oracle forms / reports version are using in EBS R12?
Hi all, We are planning to upgrade to EBS R12. what oracle forms / reports version are using in EBS R12? Thanks.