Lead time only optional

Hello,
would like to setup lead time comming from catalog only as optional without check.
Now system is transfering lead time during creation of shopping cart. If the approval is not performed on the same day when shopping cart is created, system is issuing error message that delivery time is less that lead time.
Any hint?
TIA
GOrdan

Hi,
What is your SRM version? I think the delivery date is re-calculated based on lead time.
For example, Lead Time 3 days.
SC create. 2008-03-20 -> Delivery date is set 2008-03-23
Manager Approval 2008-03-22 -> PO delivery date will be 2008-03-25
You may change the mesage to warning. Please check the Message Control customizing.
You can also clear the lead time by BADI BBP_CATALOG_TRANSFER.
Regards,
Masa

Similar Messages

Purchase requisition created only for the vendor lead time

Hello MRP experts,
I have a requirement that the purchase requisitions should be created by MRP only in the vendor lead time and rest of them should be in planned orders. Can this done and if so how. Thanks in Advance and due points will be awarded.

Hi,
As per my understanding there is no standard settings to achieve this requirement.
Regards,
Manish

HT201250 I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

There should be two sparse bundles on the TC, one for each Mac. If you click the TC in a Finder sidebar, you should see something like this (in Column View):
If you see the sparse bundle for the iMac there, but not on the window where you do a full system restore (after starting from your Recovery HD or OSX Install disc), they may be corrupted (especially if your iMac was failing at the time of the last backup).
Try repairing those backups, per #A5 in Time Machine - Troubleshooting.
Then try the full restore again, per Time Machine - Frequently Asked Question #14. Note that if you suspect problems on the most recent backup, you might want to select an earlier one.

HT5527 Each time I try to change my plan & purchase for ICloud storage the cancel button is my only option...the done option never lights up, how to I do the upgrade then?

I am unable to purchase a downgrade or upgrade since the cancel button is my only option..cannot get to "done", what can I do to get upgrade completed?

If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

Lead Time in Item Master

Hi
Does Lead Time in Item Master respect weekends and only count working days?
Meaning, for two weeks do I enter 10 or 14?
Thanks
Franz

Hi Franz
As far as I know, NO. You only have the option to include holidays in the MRP wizard itself which will then calculate against lead times. Best would be to test on a test database with both scenarios (with 10 or 14, and tick/untick holidays in MRP) and see what the results are.
According to the Online Help the above is correct:
Consider Holiday Table for Production Planning Factors in holidays and weekends in lead time calculation, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Consider Holiday Table for Purchase Planning Factors in holidays and weekends in lead time calculations, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Kind regards
Peter Juby

Lead time in LSP determination

Dear all,
in subcontracting, there is obviously some time constraint: I have to submit a freight order to the carrier at least x days/hours before planned loading date. As far as I can see, there is no such field in the carrier profile (where it could be associated with transportation lane or at least starting location). Another logical point would be the freight agreement (I agreed with the LSP that he can handle all freight I submit to him x days/hours before planned loading date), but nothing there as well. The only way I see to model this is via incompatibilities (do not assign a freight order to a specific carrier if the loading date is less than x days/hours ahead of actual date), but this seems not very convenient to me.
Any other ideas?

Hi Franz
As far as I know, NO. You only have the option to include holidays in the MRP wizard itself which will then calculate against lead times. Best would be to test on a test database with both scenarios (with 10 or 14, and tick/untick holidays in MRP) and see what the results are.
According to the Online Help the above is correct:
Consider Holiday Table for Production Planning Factors in holidays and weekends in lead time calculation, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Consider Holiday Table for Purchase Planning Factors in holidays and weekends in lead time calculations, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Kind regards
Peter Juby

ASCP Yield and Resource Lead Times

Hi,
I am working on Advanced supply Chain Planning on R12. Both ERP Source and Planning are on different instances. We are also using Oracle Shop Floor Management. In the Network Routings we have included a lead time resources at step 10, 20, 30. The resources are as follows:
These resources are defined as 'Machine'
Resource for operation 10: ASSY-LT, 112 hours, Schedule 'yes'
Resource for operation 20: TEST-LT, 64 hours, Schedule 'yes'
Resource for operation 30: PACK-LT, 48 hours, Schedule 'yes'
We also have only one shift with 8 hours. The resources are not available for 24 hours.
We also have yield at each of the above operations.
Lead time rollup calculates 28 days for the item correctly.
We are encountering a problem with ASCP Plan. The start dates and yield calculations using constrained plan with Enforce Demand Due Dates constraint seems problematic. If we check 'Calculate Resource Requiremnents' option, the plan calculates yield but the lead time gets reduecd by one third and start and completion dates for a planned order (and ATP etc.) are not accurate.
If we uncheck 'Calculate Resource Requiremnents'option in the plan, lead times are accurate but plan does not calculate yield.
We are not sure what is causing the problem.
Does anybody know what options or profiles control this behaviour?
Your help is highly appreciated.
Thanks.
Vijay

Hi Vijay,
important for your lead time calculation is the setup of the calendar and shifts and what shifts are assigned to the resource.
You say you do not have enabled the 'Available 24h' option. We are also using leadtime resources in certain cases, for example LT for Assembly. But in these cases we enable the 24H option. Next to this we set the Resource capacity to 'unlimited' by setting units to a very high number (1000 etc.) on resource level, to prevent that the system gets into capacity conflicts here.
And the yield calculation indeed should be quite independent of the leadtime resource.
best regards,
David.

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

Associative Array our only option?

Hello,
I'm having a problem accepting associative arrays as the only option I have for getting data from a stored procedure. I have a good reason for not wanting to use ref cursors as I am using the stored procedure to manipulate data which I in turn would like to pass back to VB through the stored procedure and would rather not have to insert he data into a table just to re-select it for a ref cursor.
My main concern is that with associative arrays I am expected to define the number of return results before I even generate the data. Also from what I can see I am required to set the data length for each and every item in said array one at a time. All this overhead seems like more work than what I would have to do to utilizer a reference cursor. Is there a right way to do this? I would really like to do the most straight forward way I can without the extra processing.

Hi,
Here's a blog post of mine that illustrates using pipelined functions and PL/SQL to return results:
http://oradim.blogspot.com/2007/10/odpnet-tip-using-pipelined-functions.html
Not sure if that will be helpful in your case, but perhaps it might be a place to start anyway.
- Mark

Tried installing latest iTunes (10.5.3.3). During installation received error message asking to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". No choice but to cancel installation. Any suggestions?

The problem started when my current iTunes kept popping up a window stating that my Auto Run was turned off. (which means iTunes will not be able to recognize when a CD is inserted or ejected). It asked if I wanted iTunes to run Auto Run and I select Yes every time (this window pops up every time I open my iTunes), but a second window pops up stating iTunes cannot turn on my Auto Run setting (but it will still be able to recognize CDs) to which I choose okay. A third window pops up after stating that iTunes was not properly installed and if I wish to import or burn CDs I need to re-install iTunes, except that I can import CDs since I did this only yesterday and this problem has been going on at least a month.
To add to this, I cannot cannot automatically update to version 10.5.3. (I don't recall which problem came first, my Auto Run problem or the fact that my iTunes can't update). iTunes suggested that I manually install the update, so I went to the apple site and tried manually installing the latest iTunes (10.5.3). However, during the installation process I received an error message. It asked me to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". I tried hitting Try again a few times but the same error message popped up, so I had no choice but to cancel the installation. Afterwards, I tried searching in my C drive but could not find "C:\Config.Msi\187e500.rbf"
Does anyone have any suggestions how I can update my iTunes?

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

I can't remember the password I used when I did a "backup to computer". Does this mean that my only option for backing up my iphone from now on is using the cloud? #I've tried any PW i can recall ever using, I must have gotten creative darn it.#

I did a backup decided to do a full backup with a password. I forgot the password I used (it was a couple of months ago and I must have gotten creative with it.) Without that password the option to back up to my computer is dead, right? My only option for backup will be the cloud. I want to be sure I understand the mess I am in. I have tried the passwords I have used before, I cannot believe I did this

This is asked and answered many, many times each and every day, iincluding several in the past few minutes.
The forum search bar is on the right side of this page as is the More Like This section.
You will find your answer there many times over.
Type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article.

Macbook pro freezes when I perform a soft reset. The only option is for me to hard restart it to get it working again.

Hey everyone, I've been searching for quite awhile for an answer to this issue, and I haven't found it - so I figured I would post a question about it. To give some details, whenever I soft restart my Macbook Pro (By resetting it through the "restart" option at the top left) it will shut down to a gray screen and just sit there forever. The only thing I can do, as far as I know, is a hard restart - by holding down the power button and shutting it down - I know this isn't good for it, but again, it's about the only option I've got.
I've tried to verify/repair my disk permissions, and that hasn't helped.
I've also not installed any software since before that started happening. I'm also using OS 10.8.2 - I don't remember what was installed prior to that though - but it's an early 2011 model...the problem actually started happening well before I updated to Mountain Lion, and it's still happening now.
Thanks!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

My iTunes wont sync my selected songs onto my iPhone 4, it does nothing. The only option that works is sync all music.

Hi all. I've been having this issue for some time now. You see, I want to sync all my SELECTED music from my itunes library onto my iPhone 4, however whent he approriate options are ticked, and I click sync, nothing happens. The only option that seems to put music across is to sync my entire library (which I don't want) can anyone help?

In iTunes there is a setting to automatically launch iTunes when the phone is connected.
http://osxdaily.com/2010/05/06/stop-itunes-from-automatically-opening-when-iphon eipod-is-connected/
You could just make sure the option that they talk about in this article is checked.

PO lead time report

Hi Gurus
What report can be run to provide the average time taken from PO creation to Goods reciept? IE how do we measure actual delivery lead time
Thanks in advance
BR

Hello
Thanks for reply.
IF this is not , could you pl let me know the correct procedure and any standard report for measuring the Delivery time for Purcsase Order based on materials.
As per your exnample , why a person should enter the delivery date manually , it should should come by system based on PDLT maintained ..
for tht reason only we are looking to review our materials to update correct PDLT.
thanks..

How to store lead-time and price per MPN for a single Item

We are probably one of the only CEM's that use Oracle Applications in a one-to-one MPN-IPN (Oracle Item Part Number) relationship. We do not currently store multiple Manufacturers under a single Item. Rather, we use the Customer Item Cross Reference to rank the customer's AML, with each IPN tied to a single MPN.
We are looking at moving into a one-to-many "world" in Oracle but are not sure how we can handle different pricing, lead-time, preference, status (prototype, production, obsolete, do not use), etc. for each Manufacturer's Part Number under a single Item. How are other CM's handling this???

Hi Greg,
Unfortunately, DIAdem Datafinder doesn't really support much in the way
of Date/Time search outside of the File Level Creation Date property.
In order to make the creation time of the Channels searchable you would
want to create some custom properties (or use the existing RegisterInt1
- RegisterInt6) to define your own searchable properties.
For example, since you know that you have one TDM file per day, you can
start your search by find the desired day on the File Property Level,
searching the "Creation Date" property. When you store your TDM
properties, you could store the hour creation as an integer (and
thereby searchable) in one of the RegisterInt properties of the
channel, or create your own custom "Hour" channel. You could similarly
save the minute and second property in their own custom properties.
Then, since you're saving integer values, you can then search those
values to determine the time that the channel was created.
I realize that this isn't ideal or elegant, as in total it requires 4
searches (date, hour, minute, second). But that is the most
straightforward way of searching your channels by creation date/time.
Hope this helps Greg, let me know if you have any other questions.
Dan Weiland

Lead time only optional

Similar Messages

Maybe you are looking for