Lead time using credit release date

Hi sap Gurus ,
How the Sap System should have capability to calculate the lead time using credit release date as starting date need flexibility change the lead time and How to configure in sap
Thanks & Regards
rajesh

Hello,
I don't think there is a config provision for the same in R/3. You need to talk to an ABAP expert to check the possibilityof an enhancement.
Prase

Similar Messages

Credit block and release Date and time

Dear All,
I require a report which can display credit block status date and time and credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
Kinldy help
Thank you,
NoMi

Hi,
IF it is not mentioned in single program .
You can develop a query by using multiple program. Please find the list of programs for CM
+Reports for Credit Management+
The following table provides an overview of all the reports available to you in the area of credit
management
Program Function
RFDKLI10 Customers with missing credit data
This report checks the data for the credit limit for completeness, and produces
the corresponding error lists. These can be used to re-maintain the
corresponding definitions manually, or per Batch Input.
RFDKLI20 Reorganization of credit limit for customers
This report enables you to reorganize the credit limit information in the control
areas.
RFDKLI30 Short overview credit limit
The report lists the central and control area-related data per customer.
RFDKLI40 Overview credit limit
The report provides you with an extensive overview of the customeru2019s credit
situation.
RFDKLI41 Credit master sheet
The credit master sheet enables you to display and print out the customer
master data for a single account, which is needed for the area of credit
management.
RFDKLI42 Early warning list
The early warning list enables you to display and print out customers in credit
management, who are viewed as critical customers in the area of credit checks
in SD.
RFDKLI43 Master data list
The master data list enables you to display and print out customersu2019 credit cards.
In particular, you can display information not contained in the standard system,
for example, user-defined fields or external data, which you have created with
specific additonal software.
RFDKLI50 Mass change credit limit data
This report allows quick mass change for master data in credit management.
RFDKLIAB Change display, credit management
With this report, you can display changes for credit management master data for
all accounts.
RVKRED06 Checking blocked credit documents
The report checks all blocked documents from credit view. The report is started
in the background, and should run after the incoming payments programs.
FI/SD - Credit Management/Risk Management SAP AG
Reports for Credit Management
RVKRED77 Reorganization credit data SD
The report enables you to reorganize open credit, delivery and billing document
values. It is used, for example, when updating errors occur.
RVKRED08 Checking sales documents which reach the credit horizon
The report checks all sales documents, which reach the dynamic credit check
horizon, as new. The report runs periodically, and should run at the start of a
period. The period for the u2018date of the next credit checku2019 is proposed from the
current date, with the help of the period split for open sales order values.
RVKRED09 Checking the credit documents from credit view
Released documents are only checked if the validity period for the release has
run out (number days).
RVKRED88 Simulation reorganization credit data SD
REgards,
Krishna O
Edited by: Krishna O on May 20, 2010 11:30 AM

HT5714 What time are pre-orders usually available for download on the release date?

At what time on the release date are pre-orders available for download?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards.

Sort by Release Date option?

I don't know why an option to sort by "release date" is absent from iTunes. It seems like an obvious way to layout/view music. There isn't even an option to enter the "Release Date"(only "Year") on music files.
I use the pattern "Year/Month/Date - Album Name" with in the "Album Sort Order" field to help iTunes sort my Albums by release date. But, within the "Grid View", it doesn't seem to be possible to sort by "album"(which would use the "sort album" field) to see all the albums by release date.
It just seems like such a basic thing to be added to such a music application.
It seem like there are a lot of these "little" details which iTunes never seems to add. For example: the ability for iTunes to read and write multiple Genres(& subgenre) entries with in a MP3 IDtag.
I just don't understand how the devs can neglect such options, which would be valuable for anyone who likes to keep there music properly labelled.
I wish they would forget silly ideas like PING, and concentrate on trying to make iTunes a deep music browser and management tool, like it should be.
That's the end of my rant.

I was talking about "Grid View". I cannot sort my albums by release date within "Grid View".
But yes, you are correct. Although, in my experience, the issue with using the "Release Date" field is that iTunes seems unable to read some dates correctly.
For example; I have Bob Dylans album "Times They Are A Changin'", and if I enter the release date(using a 3rd party program because you can't edit the "ReleaseTime" field in iTunes), using the correct format, "1964-01-13" iTunes displays this as "Thu 01/01/70". I know this is the correct format because I can enter a newer date and it will display correctly.
So it seems iTunes doesn't recognise anything before that date.

Total Relenishment Lead Time vs. Routings Lead Time ( very urgent)

Hello PP Champs
Need urgent help
I am facing a scenario in current project -
My Customer service quotes for delivery to an customer with in 3 days for a stock item by seeing the availability check with Total Replenishment Lead time in MAterial Master , but when production order is created SAP schedules the same on routing Lead time basis with a date after 7 days. this seems technically correct as per Std.SAP settings
1=but How to avoid this business conflict in SAP PP module?
2=another thing we are nt using the capacity planning with this client ,but incase we get 2-3 orders with same start date and same requirement date for a single work center " how to priortise the selection of production orders" w/o capacity planning
pl consider first query as most urgent and help me
Could somebody put a thought on this and help me out.. I'll reward full points any helping hand for the same
Thx in advance
BR
Sumit

Hi,
you can define via define the checking scope opjj whether to include the RLT
in availability check or not.
Note:
Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
In the standard version, leave this field blank if you want the system to check the replenishment lead time.
Dependencies
If you want the system to check the replenishment lead time, you should make sure that you have entered a value in at least one of the following three fields in the material master:
GR (goods receipt) processing time (Purchasing view)
Planned delivery time (MRP I view)
GR processing time (MRP II view)
Otherwise, the system confirms every requirement
Regards,
nandha

Defaut lead time in SRM Catalog

Hi,
I would like to know as to what are the options for making the lead time parameter ( from Catalog) set to a default value so that the delivery date ( required on date ) in SRM can be set to the current date + default value.
For eg: if the lead time in the catalog parameter can be set to 1 then the required on date in the shopping cart should be current date + 1.
I think this is possible through the BADI BBP_CATALOG_TRANSFER . Also, it is possible to set the lead time so that the system calculates the next working day. Like if a shopping cart is created on friday the delivery date should be Monday.
Does anyone have the implementation code for realizing this scenario.
Awaiting your replies !
Regards,
Rajesh Rajendran

Hi Jason,
Thanks for the reply. I know that the lead time determines the delivery date of the product procured from SRM. However, my question was more technical. In terms of adding a default lead time for all the products which are obtained from the catalog.
We can use the BADI BBP_CATALOG_TRANSFER to change or add to the data that the catalog returns to SAP Enterprise Buyer via the catalog interface. I just wanted to get a sample code of how to code the BADI for setting the lead time parameter for all the line items from catalog to say fixed value 2.
This is in cases where the lead time parameter is sent blank from the vendor.
Regards,
Rajesh
Edited by: Rajesh Rajendran on Mar 25, 2009 8:38 PM

End lead time

Hi
We are testing one scenario. In this scenario i have to simulate confirmed delivery date before end lead time. I have a requirement of 10 numbers and have 100 nos unrestricted stock. When i give required date in sales order as 13-10-2010, still system is showing end lead time as 30-11-2010 as per RLT only. When i change confirmed date to today's date still it is not accepting and giving message that it is available only on 30-11. This is a new material and i do not have any other purchase ordrs or sales orders or planned orders or anything. i have just uploaded stock with 561 movement for testing.
how do i give confirmed date in sales order before end lead time.

Chintu,
If MTO, you will never get initial confirmation inside of lead time using a 'product check' ATP. By definition: " make to order ".
If you are using MTS, then you should be able to get a confirmation, against unrestricted stock, inside of lead time.
You can get an initial confirmation with MTO inside of lead time if you are doing availability check against 'planning', such as with strategy 50. However, the existence of unrestricted FGs stock has no impact on this ATP check.
Best Regards,
DB49
Edited by: Dogboy49 on Oct 13, 2010 8:31 PM

WO scheduling based on lead times defined in item attribute

I wanted WIP to consider the fixed & variable lead times specified for the item - where I am not rolling up mfg lead times using BOM.
Has anyone been able to automatically schedule WO start date based on the lead times inputted in Item attribute.
null

Dear Bimal,
The manufacturing lead times (setup and operation) are resource specific, and to declare them at item lead time attribute level is not practical (you need to define too many item levels in BOM to reflect every manufacturing step). The other work around is when routing is defined, you define two resource steps for each resource and make the first step lot basis and give setup time as usage rate and the second step item basis and operation time as usage rate. This gets reflected in manufacturing scheduling irrespective of quantity limitation (to define lead time at item level you need to define lot size also). I hope this takes care of your needs.

How to get process start time from BI BPM Data Source

Hi,
I would like to get the process start time using the VC data source BI_BPM_MY_PROCESSES_DS.
The return parameter BI_START_TIME_VALUE returns numbers like 1.271.858.563.350,00. This seems to be ms beginning from 1970.
I tried the following to get the current date/time but it didn't work:
=DTADD(DATETIME(1970,01,01,00,00),@BI_START_TIME_VALUE,'Z')
Any idea how to do this?
Thanks,
Kevin

Hi Experts,
Do you have ideas for this SQL query ?
Regards.

Lead time for Item / Weekends

Hi
I am confused about the lead time to be entered for the item planning/MRP.
Do I include weekends when entering lead times in Items master data or not?
2 weeks = 10 days or 14 days?
In MRP I can select to respect Holidays. Does that also influence calculation of weekends as well or are weekends respected anyway?
Thanks
Franz

Hi Gordon,
Thanks.
My Holiday dates settings are:
- Weekend from Saturday to Sunday
- Ignore weekends for payments (but this is really for payments only and has no influence on MRP, I assume)
- The table lists holidays like easter or X-mas, only
As you said: This would mean that Item Master Lead time needs 'working days' to be entered.
If I get that straight, it is important to select to respect holidays in MRP with this setting. Otherwise the due dates for orders in recommendation report will end up too short/too close to the real date needed and a purchase order may be placed too late.
Franz

Product updates via API cause release date to be changed

When running product updates via the eCommerce API (Product_UpdateInsert) the release dates for the updated products are being set to 02-Jan-2000. Is this happening for anyone else?
This is kind of painful as we have a client who uses the product release dates throughout their site...

Ran into the same issue. I was using the release date to flag latest products, regardless of ordering. Unfortunately running a product import then destroyed all that work.
Found this thread with a staff reponse regarding it not being possible to set release dates using import, but it doesn't explain why release dates get reset.

Does BBM use alot of data?

Hey
Just got my BB and wonder does using the BBM and having it on all the time use alot of data?
i have a 750mb plan and all i use is facebook msn(wlm) and BBM somtimes just google
will i use much of my 750mb or not
Thanks in advance

i couldnt say. it was just that i happen to be only upping, to dropbox, and then saw downloading on the monitor.
that was triggered as odd.
i rarely look at what services are going on... only if my macbook slows down or something else odd.
in both cases i was only upping to dropbox.
i dont do alot with my macbook, other than upping to dropbox laterly.
thankyou for your thinking and help.

Product Release Date being default set to 01-Jan-2000 when exporting and importing product file

Hi there,
Just putting this out there to see if anyone else has experienced this problem.
We've just redeveloped an art site that relies on the product release date to order work, newest first, by the date they added it {tag_productlist,,,20,releasedate,true,true}
However, we've hit an issue whereby the 'release date' field is set to 01-Jan-2000 when we export and then import the product file, thus chnaging the ordering. The date can't be set on the import file (unlike web apps) and we haven't changed thousands of products manually. BC support have been stumped, suggesting it's our Mac's system date, but this is set automatically and accurate...and we don't want to change the release date anyway, that should just be the date the product was originally released.
Any thoughts or help would be greatfully received as this was a key part of the site design/development. This is the site http://hanguppictures.com
Cheers
Paul

Ran into the same issue. I was using the release date to flag latest products, regardless of ordering. Unfortunately running a product import then destroyed all that work.
Found this thread with a staff reponse regarding it not being possible to set release dates using import, but it doesn't explain why release dates get reset.

Lead time decimal places

Hi
I can not put a value with decimal places in the lead time field for itemsi n the planning data section.
it will only accept times with 1 day interval.
does anybody know how can I fix this???
Thanks for your help

Hi........
Welcome SAP Business One Forum.....
Lead time in Item Master Data calculates in Days and not in hour time so it always be in Integer. But if it calculates in hour the it would have taken lead time in Decimals....
So you can not enter Lead time in Decimals.......
Regards,
Rahul

Repeat credit check does not happen for already released sales orders when CMGST =D, for the second time using FM SD_ORDER_CREDIT_CHECK

Hi,
I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
1). Sales order created in the system --> Credit check --> Credit blocked
2). Release credit block manually CMGST =D
3). Reject sales order then unreject the same
4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
5) The order is credit checked and blocked if necessary
All goes well till this point
but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!

Issue resolved
The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field “Release date of the document determined by credit management VBAK – CMFRE”
For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check (still the order will pass into FM but the update entry in the internal table will be blank)this is a standard functionality
Process of rejection and unrejection :
Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check (all this in a single day)
note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank

Lead time using credit release date

Similar Messages

Maybe you are looking for