Leading, Quark vs. ID

I'm converting a lot of Quark (4x) files over to ID but I'm having a problem.
There is a small block of text from the QX file (for a good thousand or so business cards where the logo and address are the same), that stretches, that is to say, it's as if the the leading has increased but when I check the leading (as compared to when I open the file in Quark) it's identical, the Space Before and Space After are at zero as well.
Can anyone shed some light as to why the discrepancies?

As Bob mentions, leading -- the distance between baselines in consecutive lines of text -- should be the same. If the type is shifting vertically, look for a value in the baseline offset, or possibly you are dealing with an isolated text frame and the first baseline needs to be set to one of the other options. The default in ID is to use Ascent fo the fist baseline, not sure about Quark, but you might want to shift to Cap height or leading.

Similar Messages

Mac OS10.9 Quark 9.5.4 - font leading issues

Mac OS10.9 Quark 9.5.4
Recently upgraded OS and Quark and my documents that use the font Avenir are not displaying correctly. Fonts leading has expanded so anywhere Avenir is used, the leading changes the layout and most text boxes are overset.
- leading is set to Auto
- do not use a font manager, I use FontBook- checked usage and font is not missing
- deleted Avenir, emptied font cache, restarted and issue still exists- made a new user, packaged a file, opened in new user and issue still exists
- not just one file, issue exists in every file I made that uses Avenir in my archive- had my colleague open the same archived files on their computers and files were correct
- had colleague send me Avenir font, deleted out of my library, reloaded font and issue still exists
- deleted font out of my library and just used Avenir system font, issue still exists- deleted Quark and re-uploaded, issue still exists
- re-uploaded OS, issue still exists- did a thumbnail transfer of items from old doc to a new doc, issue still exists
- have spent over 6 hours on the phone with Quark support and have numerous messages back and forth in a job ticket, no resolution
I would not normally use Quark, but a client reuqests it. I suspect I might have a corrupted system font but I am unsure. 3 weeks behind schedule on my project and am desperate for help. Any ideas?

I just found out my E3000 was no longer compatible with making a Guest Access password. Spent a ton of time online chatting with a Linksys/Cisco rep who told me it was not longer compatible with the newer operating systems...BUT THIS IS A LIE! My E3000 works great with Yosemite. A couple of things you need to know. 1. You can no longer use the Cisco Connect CD to set up a Guest PW. It has been replaced by a handy App, that you can download from the App store: http://www.linksys.com/us/support-article?articleNum=156285 2. You can change the settings on your Wifi router directly from this app. No need to go into the 192.168.1.1 site and configure it but if you want to, you still can do this. On the website, there is no way to configure the GUEST settings unfortunately.... 3. You can configure a Guess Access code and set the number of computers allowed to use it at one time on the App. After you set the code, it will bring you off line then online again. Make sure you log in to your WIFI network under both Guest and your WIFI network to see if works. For some reason, it took some time for my iPhone to bring me to the Guest sign-in page, but I eventually switched the ON/Off button on the Guest Password setup and it worked. All guests should be redirected to a CISCO SIGN-IN page where they can log in with the guest Password. 4. I can't believe the customer reps didn't tell me immediately about this app! I gave it 1 star as it wasn't working very well until I reset everything and started over. Maybe that was just my incompetence.... Good luck! My 5 yr old dual band router is still working very well! No need to get a new one to be compatible with Yosemite!

Quark files show as unix executable files.

I have a strange issue. This is an all mac enviornment. The iMac's are running 10.4.11, and Quark express 6.0 One of the iMac's show the quark files as unix executable files. All of the other mac's can open the files without any issue.
On the iMac that has an issue, some of the folders show up as unix executable files as well. Also, there is a network share that is a log in item that should auto mount when the user logs in, it no longer mounts automatically. The only way to mount the share is by navigating through finder.
I was able to open one of the quark files by using open, then save the file using save as. this appended the file extension. I also enabled file extensions in finder, and manually appended the extension and they still would not associate with Quark. The file I did a save as does associate with Quark but it is the only one.
I repaired disk permissions and that did not help. Anyone have any ideas on this one?

I also couldn't find the download link for xsupport on the link you provided.
Looks like they have changed their business model. I just copied the URL out of the aboutbox of my copy of the Xsuppport toll but didn't crosscheck it.
Does that give any indication on what the problem is?
Not really, perhaps a corrupted or unreadable (by permission) .DS_Store file in the folder where your Xpress files reside, but then again that should affect other clients as well.
Which leads to the question:
When some clients have the correct mapping document <-> Quark Xpress and one (or more) other(s) don't, do you connect with different users to the server or are the users always the samr but the connection made from different machines?
If youuse different users to connect, then the problem very like is on the server side (addess rights, etc). If the same user has different results on different machines, the problem's most likely a local one. In which case you coud try all of ManiMenu's clean and deep clean actions.

CS3 'Increase Leading' key not working

I am trying to use, or create, a keyboard shortcut to increase leading by one of the preset units.
The shortcut should be Com+Opt+Shift+' but this is not being recognised.
I have tried removing the default shortcut and re-saving this key combination, but that combination of keys is just not being accepted. Nothing using these keys is recognised. I can use any other key or combination of keys, but not Com+Opt+Shift+' (which is the old Quark shortcut!)
Can someone suggest why these keys aren't recognised?
I'm using the latest Leopard OS and latest CS3.
Any help welocmed!

Can you please copy the contents of 2 files
amt.log and alm.log in the following forum thread. You could probably search them in finder and they are in user temporary location or please open a terminal windows and type open /tmp
Thanks

Character return leading question

Hi there! Forgive me if this has been answered peviously but i can't seem to find a thread with the answer i was looking for. I won't go into the specifics, as i think the question should be enough!
Is there a way of stopping InDesign creating larger leading when i choose to press "enter" (or "return") at the end of a line rather than letting the text just automatically flow over onto the next line?! I have tried selecting the whole paragraph and setting the leading that way but that doesn't work. I have viewed the invisible characters and made sure all the leading is set the same...but if i press enter (return), it always puts a larger leading gap than if i was to just let the text continue.
Thanks in advance for any help!

Ah ok, so it would seem my keeping the question simple tactic isn't working. To further explain in that case....
Here are the ins and outs of everything:
I had been given a document created in Quark which needed to be converted to InDesign. I did the conversion successfully . I am having to re-create all the tables correctly as in Quark it wasnt really tables, just a series of lines with tabbed text (i know, nightmare!).
The paragraph and character styles seem to have all copied over ok, and i can't see anything set up that would be creating the problem.
Here is the best way to describe the problem:
I have a cell in a table in which the text reads "Pallet Product Code". I need "pallet" to be on the top line, and "product code" to be (in the same cell) underneath it. The width of the cell means it automatically lays itself out as "palllet product" with "code" underneath. So i go to in front of the word "product" and i press enter. Doing so creates a larger leading gap between the two lines than when it was just left alone. So if i opt for just putting in a load of spaces to shove the word "product" over onto the next line it all looks fine, but if i press enter - doom! Well, not doom, just bigger leading...i guess i could just deal with it or reduce the leading lower again to make it look right...but i like to do things properly.
If i quadrouple click the leading is all set to the same value in the cell. I'm thinking this should be something really simply to sort out and i must be missing something silly....but here's hoping!
P.S I am using CS3, on Mac os x 10.5.8

Pages vs Quark/InDesign/Pagemaker

I have a friend who has been using Pagemaker on a PC for several years in his business. He now wants to switch to a Mac. As I go over his options the cost of new software has been a deal-buster (Quark - $700, Creative Suite - $1000).
I wonder if iWork might get him by. He builds 8-up "cards" on 8.5" x 11" sheets in Pagemaker. Is this something that could be done in Pages - does it use text blocks like Quark and InDesign?
Also: What are the "Advanced image tools"? Are these image editing tools such as those in Photoshop?
Thanks

Answer to my own question:
I downloaded iWork 08 and gave Pages a look. It's much the same as Appleworks and seems that it would be Appleworks had they chosen not to repackage it as Pages.
It's nice - feels like a 100% Apple (corporation) program. The interface is cool and the functions provided are nice - where else are you going to get drop shadows and linked text boxes with run-around for $79. It has great navigation for positioning elements. It smokes Word by a mile for 99% of what most people buy Word for (not doctorial theses).
I'm sure that lots of wonderful work will be produced with this program. If you plan to build jobs for electronic distribution via pdf or print to a desktop printer it's great.
But, it's not useable in in the real graphic arts production world because:
No support for Pantone colors or spot colors.
Type manipulation is non existent - no scaling or kerning. You can’t set leading (it uses line spacing). No space before or after and so on.
No control of graphic files once they are imported. Are they imbedded? It converts Illustrator eps files to pdf on import.
I wish I had bought it instead of Microsoft Office but I'll have to stick with Quark and InDesign - I will recommend it for my friend.

I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

Run report that show "BOTH" campaign name AND contact when getting integration error message that relates to Lead Campaign Association

When running an External Calls Failed report for Lead Campaign Association (e.g.Attempted to add a campaign member where either the member id 00Q70000015ngo5 or the campaign id null is null.), the report show me the contact but not the campaign the contact was trying to associate itself to in SFDC. In order to see the campaign, I have to click on the downward arrow and click on the "view external call details" FOR EACH INDIVIDUAL CONTACT.
Is there a report I can run that shows me both the campaign and contact for the error? I can't efficently trouble shoot issues in Eloqua if I have to view each individual record with two or more clicks.
Any advise?

I am getting the same error when opening the J2se Development Kit 5.0 Update 8 after I press the Run button. ( "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package").
Is there a solution ?
Thanks,
Luck 08/21/06

Lack of leading korean language

I'm Mac OS X Lion User and use Adobe Web premium package.
But always link-broken image problem has been encountered while opening illustrator file
I mean, Image link was broken when i open illustrator file, presentation work sheet.
I don't understand why the link is broken, all files is stil in same folder.
I think the reason is lack of leading korean language. Link problem is very simple.
I don't think the problem is Apple device i think.
I enough to use present condition illustrator without this problem...( please don't bother me any more.)
Just I want Illustrator Developer community on the website in order to learn usage skill.
It's help you to obtain new illustrator user also.
Illustrator is very useful to make artwork and presentation work sheet, so i love it.
I would like to give you hint in order to increase your illustrator usability & value.
We need new function to place or import " *.swf " file on the illustrator work layer.
And this function have to work on the acrobat reader (viewer) also.
It will give user powerful energy usability.
This professional skill and technology is not that hard to you i think.
Please solve a problem by communication and compromise with Macromedia. Acrobat Pro is also same .
Illustrator is better than Acrobat pro. My think is always same from the present to the past..
I would like to know what the problem is?

Moving this discussion to the Illustrator forum. I believe the poster is having problems with links within Adobe Illustrator?

Error in creation of Lead by Channel Manager

Hi All,
I created Channel Manger Portal for creation of Lead using blview=MKT_LEAD_M,BSP Application=CRM_BSP_FRAME and CRM Application=CRMD_BUS2000108.
It is working fine for search only.when i click on create button then no process is going and i am getting the following error message on the top of page:
"Erorr:Please select at least one entry to execute the function".
Please help me
kushal

Hi,
As the error message implies - you are trying to insert a record into a table with duplicate keys to a record that already exists.
You need to look further into the termination to determine which table it was failing on and then figure out why it was trying to insert a duplicate key entry. Find out if it is a standard or custom table and see if there is any custom code in user-exits or BADI's that might be causing it.
Thanks.
Ashok.

Lead Columns in Report Painter

Hi All
Is it possible to have two lead columns in a report? My requirement is that i want to prepare a profit and loss account by using report painter. It should look like
Expense           Amount           Revenue          Amount
Exp G/L A/c       XXX             Sale G/L A/c      XXX          (For Example)
Now i want to define Expense column as lead column and revenue column as a lead column
Kindly help me with issue
Regards
Invin

Hi Abhijit
Kindly elaborate it I am new to report painter i would like to tell you again what is my specific design requirement
LEAD Column                Column 1                              LEAD Column                    Column 2
Expense                      Amount                                     Revenue                      Amount
(These four will be my columns under this following will be )
Salary Exp G/L       1000                                 Sale G/L A/c       2000 (For Example)
(This salary will be my heading and i will be typing in words and under this i will be assigning my salary Gl A/c same will be the case with Sale)
Now i want to define Expense column as lead column and revenue column as a lead column so that i can write Salary as heading and sales as heading just like traditional Profit and loss account what earlier we use to prepare by hand.
Kindly elaborate it how to do it
Regards
Invin
Edited by: sapcofi on Oct 6, 2009 1:37 PM

Adding leading zeros in abap objects.

Can anyone explain me
1. How to add leading zeros to a field in abap objects.
For eg:
data: dmb(6) type c value '123456',
actually the output value of c should have leading zeros added to it for length 16.
i.e '0000000000123456' . If the length of dmb is less than 16 then leading zeros should be added to that value to make it 16 as length.
Please tell me how to do it in ABAP Objects.

Hi Camila
Try to use the statement
DATA: ALPHABET(15) VALUE ' ABCDEFGHIJ',
 M1(4) VALUE 'ABCD',
 M2(6) VALUE 'BJJCA '.
SHIFT ALPHABET LEFT DELETING LEADING M1.
The field
ALPHABET
remains unchanged.
SHIFT ALPHABET LEFT DELETING LEADING SPACE.
The field ALPHABET now has the following contents:
'ABCDEFGHIJ '.
SHIFT ALPHABET RIGHT DELETING TRAILING M2.
ALPHABET now has the following contents:
' ABCDEFGHI'.
IN CHARACTER MODE
Effect
This is the default setting (see above), and the addition is therefore optional.
Note
Performance:
For performance reasons, you should avoid using SHIFT in WHILE loops.
The runtime required to shift a field with length 10 by one character to the right or left requires about 5 msn (standardized microseconds). A cyclical shift requires around 7 msn. The runtime for the ...
LEFT DELETING LEADING
... variant is around 3.5 msn, for ...
RIGHT DELETING TRAILING
... around 4.5 msn.
Reward all helpfull answers
Regards
Pavan

Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card. The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit. I would describe my use as "light" based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted 3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble. Does that make sense? Not to me....but it is clear to all my level of knowledge. Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

ECATT abends during recording when lead selection is set to 0 on web dynpro

We have a web dynpro application that works ok when running by itself.   When we tried to record ECATT testing on it, it abended after we click on a selection from a list of values.    The error on the browser indicated an error on the "lead select".   After reviewing the dump, we found that it abends on an exception when the lead selection on the ALV is not set.   When we changed our code to set the lead selection to 1, the ECATT recording worked.
We have a requirement to set the lead selection of ALV to 0 so we need to change back our code.   We just did the setting to 1 just to get ECATT recording to work for now.    Does anybody know why ECATT requires this?   Is there a support packs that fixes this?
Here is a snippet from ST22 for more details on this:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_CONTEXT
Date and Time          2007/02/07 14:50:06
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CONTEXT_NODE===========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
The lead selection has not been set. VIEW_TABLE
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
"CL_WDR_CONTEXT_NODE===========CP" or "CL_WDR_CONTEXT_NODE===========CM00V"
"_RAISE_ELEMENT_NOT_FOUND"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "torsapd01"
Network address...... "10.2.75.183"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "TORSAPD01"
Database type..... "MSSQL"
Database name..... "PR3"
Database user ID.. "dbo"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Aug 28 2006 22:20:27"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 75
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16128
EM...... 16759616
Heap.... 0
Page.... 0
MM Used. 12713776
MM Free. 4042608
User and Transaction
Client.............. 200
User................ "SIC0010"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDR_CONTEXT_NODE===========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "10.49.77.47"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/webdynpro/sap/zpr3_base_price/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_CONTEXT_NODE===========CP" -
in "_RAISE_ELEMENT_NOT_FOUND".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 11
of the (Include) program "CL_WDR_CONTEXT_NODE===========CM00V".
Source Code Extract
Line
SourceCde
1
method RAISEELEMENT_NOT_FOUND.
2
data: l_count type I,
3
l_node_name type string.
4
5
l_node_name = if_wd_context_node~get_path( ).
6
7
l_count = if_wd_context_node~get_element_count( ).
8
if l_count = 0.
9
raise exception type cx_wd_context exporting textid = cx_wd_context=>NODE_EMPTY node_nam
10
elseif element_index = if_wd_context_node=>use_lead_selection.
>>>>>
raise exception type cx_wd_context exporting textid = cx_wd_context=>NO_LEAD_SELECTION n
12
else.
13
raise exception type cx_wd_context exporting textid = cx_wd_context=>ELEMENT_NOT_FOUND n
14
endif.
15
endmethod.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
E
SY-MSGID
TD
SY-MSGNO
600
SY-MSGV1
000003587101
SY-MSGV2
0001
SY-MSGV3
EN
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070207
SY-UZEIT
145005
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT

Hi Eugene,
i suggest you raise an SMP ticket for these.
Looks like a bug at first glance.
regards
Phil

Leading, Quark vs. ID

Similar Messages

Maybe you are looking for