Leading zeroes - switching off ALHPA conversion doesn't work

Hi all.
I have an IObj ZPARENT with compounding attribute ZATTR.
While loading data into ZPARENT I got errors regarding duplicate records. Errors occur because I got leading zeroes in ZATTR and records like "1", "01", "001" become "0001" .
I thought it is because of ALHPA conv. in ZATTR, so I deleted ZATTR master data, removed ALPHA conv. from ZATTR and tried to reload data. I got same duplicate key error and leading zeroes.
I also examined my transformation. It doesn't have any ALPHA conversions. I do post data into ZATTR through simple routine:
     data: CATTR type c length 35.
     CATTR = SOURCE_FIELDS-REF_INF.
     REPLACE ALL OCCURRENCES OF '#' IN CATTR WITH ':'.
     RESULT = CATTR.
The data in PSA looks fine - it doesn't have any leading zeroes in PSA, but than it comes to IObj. I got them.
What I supposed to do to avoid leading zeroes in ZATTR??

Hi,
Below SAP Note may help you out.
Note 447341 - values for ALPHA conversion routine
check this note also...
Note 1242892 - Leading zeros removed from the contract number
Veerendra.
Edited by: denduluri veerendra kumar on Jul 1, 2009 4:02 PM

Similar Messages

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.

You should be able to select Force Quit from the menu beneath the Apple icon in Finder
and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
OS X - Support
Not sure if rebuilding the iPhoto library would help this issue. However if you had to
turn off the computer without the correct method (unplug, etc; instead of menu choice)
the system may have accrued damages and should be checked, maybe repaired by
use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
run 'repair disk permissions' while it is running in that reduced mode; then restart after.
•Understanding Safe Mode - tuts+ computer skills tutorial:
http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
•OS X: What is Safe Boot, Safe Mode?
Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
There likely are other means to rectify troublesome applications, including reinstall.
Be sure to backup your music, image, video, and other work on an external drive
or suitable device as a precaution against loss should there be a hard drive failure.
iPhoto - Mac Apps - Apple Support
There should be some tips and help information using iPhoto via this tiny Support link.
Good luck & happy computing!

My iCloud keeps asking me for a password even when I enter it, it still keeps asking. I have tried turning it off but it doesn't work.

My iCloud keeps asking me for a password even when I enter it, it still keeps asking. I have tried turning it off but it doesn't work. It is really annoying!!
Please help me!! (The same thing happened on this device and when I reset it, it worked....why isn't my iPad 3rd gen. Working...?)

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

The Side Switch is to mute your ringers, and most of the application's sound. To totally mute the sound, you must use the rocker to mute it.

Switch Between Apps shortcut doesn't work, tip won't go away

The only solution I could find for this is to move my mouse to the top left of the screen, but it doesn't work when I do. Therefore, whenever I have an app open, the ****ing tip to switch between apps won't leave my screen. Same thing for the tip that
shows me where the start button is, only when the tip isn't actually there, I can use the button without a hitch. Seriously frustrating considering I haven't had a computer for almost a week and this happened the moment I started it up.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

My Safari icon/app is missing. I How do i get it back? I try settings - general - restrictions - safari - off / on but doesn't work

My Safari icon/app is missing. I How do i get it back? I try settings - general - restrictions - safari - off / on but doesn't work

First, it might be you simply put Safari in a folder somewhere. Try searching for it using Spotlight. Drag down on the screen to display the Spotlight search bar and type "Safari". If you see Safari, it is still accessible on your iPad. If not, try the following.
Reset your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
Finally, if that doesn't help, try turning off restrictions, then turning them back on.

Wifi goes on and off, backlit keyboard doesn't work and no sound since Lion upgrade. I can get the wifi back by going into safe mode and re booting(someone suggested on here), but can't let computer die or turn off or have to do it again.

My Wifi connection goes off if computer dies or shuts off, I can only make it work if I go into safe mode and reboot, it was just that, but now my keyboard doesn't light up like it's supposed to in low or no light and in system preferences it's like it doesn't exist. Also, the sound doesn't work, I can't turn it up or down, it shows the sound icon grayed out and the anti symbol when I push F11 and F12, also it's like it doesn't exist in system preferences either. I have never had any problems with my MB Pro, I purchased in Feb. 2010. , but I upgraded to Lion last month, I haven't been using my laptop as much since I had an Ipad I given to me, so I think that's why I didn't notice these issues right away. What do I do? HELP!! Do I take it to Apple? I don't have the Apple care warranty, so will it be expensive for them to fix? Can I get my money back for Lion if I restore to Snow Leopard?

Take it to an Apple store or AASP. How much it will cost will depend on their determination of the problems. To bad you didn't purchase extended AppleCare. No you don't get your money back for purchasing Lion.

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Source system conversion doesn't work after transport

Just transported a query to BW Production and found that the source system is still the same as in DEV.
The conversion is there (QAS-->PRD). But the conversion doesn't seem working in the transport.
Can anyone tell me how to troubleshoot this issue?

Hi,
Please check the following:----
1. RSA1->Source Systems --> Select the source system -->Check. It should take you to the correct source system with a Remote logon.
2. Check the logical system mappings in RSLOGSYSMAP table.
3. http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70a7b233-8be5-2c10-4190-aed723af5373
Regards,
Suman

Gnome3.6 shortcuts for "switch to next source" doesn't work after lock

If you have two or more input sources, once you have locked the screen, when typing password for re-login, the "switch to next source" shortcuts ("Ctrl+Space" for me) doesn't work.
I don't know whether it is a feature, or a bug? In fact I wonder if ALL THE SHORTCUTS DO NOT WORK AFTER LOCK.
Have anyone come up with this problem? If it is a bug, have it been reported to GNOME Bugzilla?

Hello there,
How are you reviewing the course? What is the action associated with 'Review Course' button? Also, can please share the screenshot of Preferences>Quiz>Settings?
Thanks.
Vish

Charger works when notebook is off, but it doesn't work when the notebook is on.

I have a HP Pavilion dv6-3070tx Entertainment Notebook PC.
My charger doesn't work when the notebook is on and plugged in, but when the notebook is off (or even when it is in sleep mode) it gets charged. I tested this by using different chargers that work in other hp notebooks. If this can be solved, I'll be grateful.

Hi
There are two structures of DVDs
• Data-DVD - as burned from DeskTop/Finder
• Video-DVD - to be played on a DVD-Player - Needs a program that can do this
One can in iMovie - Export as QuickTime .mov and save this via DeskTop/Finder onto a DVD - BUT this will only play on a Computer and if it is a Window-PC this needs to download QT-player or VLC-player.
But no DVD-player for TV can play back this.
To get a Video-DVD then You need
• iDVD (not from Apple any more) - or -
• DVD Studio Pro (not from Apple any more) - or -
• FinalCut Pro-X (can do simple Video-DVDs) - or -
• Burn - http://www.digital-digest.com/software/Burn.html - FREE - but very PLAIN - no fancy things at all.
• Roxio Toast™ 11 Pro - Fairly advanced - and costs a bit - still very Good and lot's of great tool's included. (I love it) - Can also back convert home made DVDs to an editable mode in an OK quality. With BD-component also capable to do sort of Blu-Ray DVDs.
Yours Bengt W

Calculate Results As Average of Detailed Values That Are Not Zero... with hiearchies doesn't work

Hi all,
For the key figures, the option of "Calculate Results As Average of Detailed Values That Are Not Zero, Null, or Error" works fine for characteristics drilldown without hierarchies, but with hierarchies it simply doesn't work; instead of calculate the overall result as average, the system calculates it as SUM. It works like the option "Nothing Defined" where the results provided by the analytic engine are displayed. No local calculation takes place.
How can I do to display the overall result of hierarchical drilldown of a characteristic as an average?
Many thanks in advance!
Abraham

It is usually best to just keep it as simple as possible. What do you think the code in the OR Array Elements does? I imagine it is just a simple FOR loop with a variable to keep the latest OR. So I would do what GerdW just showed with the FOR loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

DSL to Cable Modem switch - now Airport express doesn't work

I just switched from DSL to Cable and now connecting to the internet via my Airport express doesn't work. It's fine direct connecting via ethernet.
Is there a known issue? I've tried various things but no dice.
Are my Airport expresses now married to the older modem?
Any help would be appreciated.

Okay I got a new Airport extreme since there was a chance that the new modem and the expresses weren't 100% compatible and the Extreme worked almost out of the box.
Truth is, I might have just had to hold down the reset buttons on the expresses longer so that they would revert to the manufacturer's default and they might have become functional since I did that later and my old expresses are now connected to the home network.
For anyone else with this issue, before giving up or if you don't need an excuse to buy an extreme, hold that airport reset button in a good two minutes before and then another two during the plug-in and you might get lucky.
Thanks.

My 3g internet doesn't work anywhere. I can get internet with wifi, but when I turn that off, the internet doesn't work at all. Any ideas?

I've already tried resetting the phone. Nothing seems to work. Occasionally the internet works fine, but most times, it doesn't work at all.

Contact your carrier to ensure data access with your carrier's cellular network is provisioned properly with your line/number/account.

802.1x on the switch port and Macintosh doesn't work

* When .1x is turned on for a port where a Mac is connected, after the Mac goes to sleep it doesn't get prompted to authenticate until the link on the port is dropped and reinstated?
The Mac does not continue to have network access.
* When the same occurs for a port where a Windows machine is connected, there is an immediate prompt for authentication?
Has anyone had this issue? Does anyone know of a solution.
We are using Cisco ISE 1.2.0 and Cisco 3750 switches with version 12.2(55)SE8

After 2 TAC cases the solutions comes from Apple. Version 10.10 has resolved issues with 802.1x.

Leading zeroes - switching off ALHPA conversion doesn't work

Similar Messages

Maybe you are looking for