Leading zeros in SAP ME materials that come from SAP ERP

Hello!
When materials are transfered from the SAP ERP side via MII to SAP ME it can be observed that material numbers have leading zeros. For example a material number is created in SAP ME like 0000000123456 instead of 123456.
I think this behaviour can be changed in the XLST transformations, which are part of SAPMEINT.
Is this the usual way to fulfill the requirement "No leading zeros for SAP ME material numbers"?
It can be observed that for example the shop orders don't have the leading zeros, when they are created in SAP ME.
Of cause, when confirmations are sent back to SAP ERP the  corresponding XSLT transformation adds again these '0',
it is somehow necessary for SAP ERP for the shop order lookup.
I see one disadvantage when using modified XLST transformations.
Each time a new version of SAPMEINT is deployed a check shoukld be made from our side, if there are changes in the original XSLT transformations.
So what is the statement of direction from the SAPMEINT developers?
Kr,
        Erich Lind

We see the same problem for the leading zeros. There is no consistency in this case.
Also the SAPMEINT Enhanced planned order report is triggering only for material with leading zeros. In this case you can't modify anything to prevent this. No XSLT modification possible there.
Can we get any statement from SAP?!?

Similar Messages

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Problem in saving data in spreadshee​t that comes from DAQ

    Hi
    I am new for using the Labview. I have problem saving the data in spreadsheet. mine just save the last reading that come from DAQ. And can not figure it out .
    If  there is way to make it save all the data with the time when I start run it till I stop it,please
    Thanks in advince
    Attachments:
    2 temp recording spreadsheet Ver_ 3.vi ‏141 KB

    I've changed the architecture to something that is way better then the sequence structure you had (State Machine).  Just to give you an idea on how it could be done.
    Still the dynamic data type is in there (which I don't like), but I'm not going to change your method.
    I've cleaned up your code a bit.  It's still not perfect, but it's done in 2mins. 
    I do have one question though : why are you saving an entire column (the last) of data which contains the same value (namely the total time the test ran)???
    Kind regards,
    - Bjorn -
    Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
    LabVIEW 5.1 - LabVIEW 2012
    Attachments:
    2 temp recording spreadsheet Ver_ 4SM.vi ‏100 KB

  • [svn:fx-trunk] 9171: Adding the change notes that come from the TLF folks

    Revision: 9171
    Author:   [email protected]
    Date:     2009-08-07 08:57:35 -0700 (Fri, 07 Aug 2009)
    Log Message:
    Adding the change notes that come from the TLF folks
    bug: nope
    qa: nope
    checkintests: no need
    Added Paths:
        flex/sdk/trunk/frameworks/projects/textLayout/ReleaseNotes.txt

  • How to handle data that got from SAP by Webservice?

    Hi, Gurus.
    I am working on IFbA with ABAP and Adobe LiveCycle Designer.
    I've developed a function module in R/3 system and created webservice, connected the WSDL address to the form. The problem is how can i handle data that got from SAP by Webservice?
    It's Ok if i bind the dataconnection node to the form element, but how can i handle data without binding to the form element? I mean that how can i use the data retrieved from Webserivce in the Javascript, please give me some sample code or script method.
    Thanks.

    Hi Yang,
    If you are using Web Service, then the binding will be done automatically.
    It can't grow automatically, what else should i do to achieve this?
    1.Select the table(make sure you are not selecting subform) in Hierarchy view
    2. Under table select the Row which is having the required fileds for data
    3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
    Regards,
    Sachin

  • How come all my email that comes from facebook comes with the same from name

    All e-mail that comes from my facebook has the same from name like sandy wenfel when its from my mother,wife,friend ect.
    What did i do and how do i fix it

    Airmail you my friend are a Genius.
    I've been living with that nightmare for months, and you fixed it in seconds.
    I should have asked this question here a long time ago. Thank You Kevin (AKA)''Teeter-Kick-Azz [[#question-1056669|said]]''
    <blockquote>
    All e-mail that comes from my facebook has the same from name like sandy wenfel when its from my mother,wife,friend ect.
    What did i do and how do i fix it
    </blockquote>

  • Getting "Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452)" error after upgradating to siebel Open UI 8.1.1.11

    Hello Team,
    We have upgraded from Siebel 8.1.1.3 to Siebel Open UI  8.1.1.11.
    But after up-gradation we are getting the below error in   "My Account Opportunity" View.
    We detected an Error which may have occurred for one or more of the following reasons:
    Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
    Thanks,
    Tirupati Nanda
    Mob:-9742404115

    Hello Team,
    We have upgraded from Siebel 8.1.1.3 to Siebel Open UI  8.1.1.11.
    But after up-gradation we are getting the below error in   "My Account Opportunity" View.
    We detected an Error which may have occurred for one or more of the following reasons:
    Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
    Thanks,
    Tirupati Nanda
    Mob:-9742404115

  • I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

    I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • How can i autoforward that mail from SAP INBOX to the outlook

    Hi ,
    My Requirement is that,
    I have to send an email to outlook, whenever PO Created in SRM System
    I have created  custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
    It is sending SAP Mail to the User to his inbox perfectly.
    Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
    Please give some suggestions. ot it can be achived any other way.
    Note: This is Email Message not a workitem.
    I have doubt that RSWW program will work only for workitems.*
    Thanks & Regards,
    Suresh.

    Hi ST,
    what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
    Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
    Hope it helps.
    Aditya

  • Need to show leading zeros in the number field when printed from RDF

    We have a requirement to show leading zeros in the rdf output.
    We cannot use a format mask to achieve the same as the length of the field is not fixed.
    for ex if we have 0.68 then the same is printed in RDF as .68
    we cannot use a format mask as the length of the field is not fixed.
    we need to
    Kindly suggest if any solution exists for the same.

    the numbers after the decima can be anything..
    it can range between 2 to 10 or more...
    as told by you if we put the format as to_char(.68,'90.99') it shall give 0.68 but what for numbers like0.678,0.4567,0.765433 it will display only 2 digits after the decimal...
    The requirement is to dispaly the number as it is ,only the zeroes before the decimal should stay intact..
    we are not able to achieve this in rdf output..
    if it is
    0.678 then 0.678 shld be dispalyed
    0.4567 then 0.4567
    0.765433 then 0.765433
    one format mask shld wrk for all the above..
    we would not be changing the format mask for each number....

  • My Mail account will pick up all emails but not those that come from aol addresses.

    I receive emails without problems to my usual email address set up on the Mail application on my Desktop OSX 10.5.8 unless they are sent from an aol address. Oddly these emails come to my phone (Samsung Galaxy 2). These aol emails are received on the webmail (ie on my ISP server's email) so why can't I get them on my normal email system? Please help but in simple language!

    Thanks for suggestion. Just tried to do that, forwarding from my own email address on webmail to my own email address on my client email. It worked! Spooky.
    I'm thinking that my computer is either trying to protect itself in some way from this particular sender's emails or it just won't recognise them, but I can't find anything in the security settings that would be blocking them and according to my service provider they haven't set anything up either. I have received other aol email from different senders in the past.

  • The extreme heat that comes from my macbook pro

    my macbook pro gets so hot where my left palm rests on the laptop that it becomes unbearable. This happens often when I have alot of processes running and I could understand if the laptop just got a little bit hot from doing this task, but this intense heat generation is unacceptable and generally occurs more when I use the apple OS on my computer than the windows OS (even when i am playing hardware intense games on windows it never gets this hot)
    I am currently downloading files wirelessley, listening to music, the keyboard is illuminated, the fans are spinning at a normal 1999 rpm's and the temperatures of my hardware seem normal, I am typing on my lap in a chair, but I am allowing proper ventillation from the back of the laptop and it still gets this hot occasionally when I am using it on a surface.
    The heat only comes from that one spot underneath my wrist, any suggestions?
    Message was edited by: CaptainHowdy
    Message was edited by: Host

    Hi, I have the exact same problem. You can read my thread on:
    http://discussions.apple.com/thread.jspa?threadID=1076379&tstart=15
    Well, besides FanControl, there is also the CoolBook utility were you can undervolt the CPU (without decreasing performance). However, the area we’re worried about is where the HD is located, lowering the CPU heat might not help. But since the entire case is in aluminum, it just might
    I haven’t messed with CoolBook yet, as it doesn’t fully support Santa Rosa yet, and would also like to hear more experience from other MBP users.

  • SAP BW HR Reporting book from SAP Press

    Hi,
    is there any book/documentation that explicitly covers extraction, Modeling, and Reporting concerned to SAP BW HR with good real time scenarios.
    I have searched a lot in SDN, but no luck.
    spent Hrs on BI content for HR, its vague for me.
    Searched SAP Press, could not find anything.
    Appreciate any suggestions.

    Hi ,
    Check the book from the below link from SAP Press , it covers the BI Reporting also
    http://www.sap-press.com/products/HR-Reporting-with-SAP.html
    Regards,
    Sathya

  • SAP BW 3.5 Support from SAP

    Hi All,
    My customer is requesting for the below things, Please help me where i can check the details.
    1) SAP BW 3.5 product support from SAP till what period (years).
    2) where i can check the license expiry date of my product.
    I have Customer S-user ID for my Project, Please guide where i can get the above details in service market place.
    Regards,
    Vara Prasad.

    Hello Prasad,
    For SAP BW3.5 ([click for details|https://websmp105.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000192])
    End of mainstream maintenance 31.03.2010
    End of extended maintenance 31.03.2013
    Please see the following links for more details from service market place,
    [SAP Maintenance Strategy|https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000611452&_SCENARIO=01100035870000000202]
    [Customer-Specific Maintenance |https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000611452&_SCENARIO=01100035870000000202]
    Also see [Product Availability Matrix |https://websmp105.sap-ag.de/pam]
    Thanks
    Chandran

  • SAP DB recovery data, transfer from SAP to MAX DB

    Hi all
    I have use the SAP DB 7.4 database platform (it is very old, but maybe anyone knows or remember it)
    SAP DB was installed on Windows 2000 server (32 bit DELL),after the server crash I have only backup file (hot backup with database parameters and data about 200GGb), as temporary solution I've recovered it on just desktop PC with good parameters (CORE2DUO, 16GGb RAM...) the recovery continued about 4 hours. I've tried to recovery this backup on new server (IBM) on 32bit Windows 2003 Server, but I was confused because recovery was continued about 16-20 and it still recovering very slow I dont know what the problem, maybe anyone changed OS or server version for SAP DB 7.4?
    One more question, is it possible to transfer database (recovery backup) from SAP DB to MAX DB?
    Thanks.

    Hi,
    SAP DB was installed on Windows 2000 server (32 bit DELL),after the server crash I have only backup file (hot backup with database parameters and data about 200GGb), as temporary solution I've recovered it on just desktop PC with good parameters (CORE2DUO, 16GGb RAM...) the recovery continued about 4 hours
    If your SAP instance running on above platform ? If yes, Whats the SAP release you have.
    I've tried to recovery this backup on new server (IBM) on 32bit Windows 2003 Server, but I was confused because recovery was continued about 16-20 and it still recovering very slow I dont know what the problem, maybe anyone changed OS or server version for SAP DB 7.4?
    What is the server configuration on IBM server. How much RAM and CPU does it have.
    Regards,
    Deepak Kori

Maybe you are looking for