Leadtek A280 TD (TI-4800SE) Multiple monitor support not available on

Hello,
I have a new Leadtek Winfast A280 TD MyVIVO card (TI-4800) on a MSI K7N2G-ILSR (nForce2 motherboard). Completely fresh installation of XP pro with nothing except the nForce 2 motherboard drivers and the latest (43.45)drivers. I know that the internal nForce IGP is disabled when an AGP card is inserted.
I have two LG 1710S (VGA connector only monitors), both plugged into the A280, one in the VGA port and the other one into the DVI port using a DVI-to_VGA converter.
The problem is that I cannot use my second monitor at all. When booting it displays a cloned inage, but once in XP the second display (on the DVI) goes blank and stays blank. Nothing I can do with nView or the drivers will make
it work (or even be detected) in any way at all.
Three key points:
1. nView Desktop Manager -> Windows -> Window control is all greyed out.
2. Desktop -> Properties -> Settings shows only one monitor with none of the 'Extend my windows desktop' options one normally sees with dual head cards.
3. Desktop -> Properties -> Settings -> Advanced -> GeForce -> nView display mode ->nView modes only the Standard (Dualview) option is available and the graphic shows only one screen.
I am reasonably experienced with multiple monitors having used Matrox cards for years and setup a nice little Shuttle SN42G dual monitor system using the same nVidia drivers. So I am fairly sure I've not overlooked a setting somewhere.
BIOS is all fully up to date (1.3) and XP SP1 is applied. The card works fine in 3D games and everything, but just does not seem to realise it has a second monitor.
*** KEY POINT ***
I am worried that the MSI K7N2G-ILSR motherboard is somehow preventing the support of dual monitors with my A280 card in WinXP because it itself does not support dual monitors with the IGP. This may not be true, but I have to post my experience into this forum.
*** KEY POINT ***
Thanks,
James Burton

Okay. I figured out what was going wrong. Nothing to do with the MSI or the motherboard but it is of interest to anyone wanting dual monitor on two LCD flat screens.
It turns out that the A280 graphics card (and probably other nVidia cards) do not detect LCD monitors (at least by default) in the secondary position.
This was verified when I connected an normal CRT as secondary an it all wored fine.
Further discussions will be posted in the nVidia newsgroup for those interested
James Burton

Similar Messages

Feature Request - Better Multiple Monitor Support

Lightroom's support for a second display has definitely helped my workflow. I hope the team will consider adding more flexible multiple monitor support in version 4. Here's why.
I've recently experimented with running one of my three screens in portrait mode. When this screen hosts Lightroom's secondary display window in Loupe view, my verticals finally get equal real estate for editing. While I've not done hard statistics on my library, I know more than 50% of my imagery is in portrait orientation.
I'd like to see LR V4 support three or more screens so I could set up as follow:
Screen 1 - main lightroom interface, would not need to be calibrated, for controls and navigation
Screen 2 - Portrait orientation, loupe view - this would be a calibrated display, all develop changes to verticals would be judged on this screen
Screen 3 - Landscape orientation, loupe view - another calibrated display, all develop changes to horizontals would be judged on this screen
If Adobe could make the app intelligent enough to route the image to the correct screen based on orientation (recognizing and respecting cropping that could change orientation) my edit sessions would certainly speed up and I could maximize the productivity of multiple screens.
I'd be happy with this, but I'm also stymied by the need to switch back to Library mode to tag images when my primary workflow has me in develop. Ultimately everything depends on the quality of the image. Before I invest in image-specific meta data, I have to process or at least "test-process" an image. IMO the Quick Develop panel is useless, once you become accustomed to the granular control of the develop sliders, it just doesn't cut it.
In the three monitor setup I described above I'd love to be able to configure screen 1, with a combination of panels from Library and Develop, so I could stay "develop centric" with immediate access to keywording and meta. The two additional screens would intelligently handle image display.
I think this might speed my workflow by 33% and having just returned from a Tour de France project that generated 23,000 images I need all the productivity help I can get.

VeloDramatic wrote:
Thanks for all those votes Rob. Now we just need to get the other 999,999 on board.
Actually, this topic has come up a lot on this forum. At this point, I think we just need to get Adobe on board.
VeloDramatic wrote:
There may be another thread for this one additional thought. If Adobe does improve multiple monitor support, we should be able to optimize our previews for those screens. Even after prerendering 1:1 previews there are issues with DEVELOP doing its own thing (I believe) each time a new image is loaded. I make extensive use of the PREVIOUS button moving through my shoots and there's always a lag of one or two seconds while the develop preview loads before the button is active. In a desktop environment where multiple screens allow landscape and portrait images to be displayed full screen I'd argue that 100% of the host screen resolution would be the ideal preview. Hope that made sense.
Yes, faster switching would be nice. I'm not sure what that would take. As it stands, there's like "9" previews generated when you do 1:1s - 100% down to tiny thumbnails. Still, one at exact monitor size that does not need to be resized at all does seem like it would be the fastest - I'm a bit on a limb though at this point.
Rob

NB520 - Multiple monitor support

Do NB520 have multiple monitor support built in, if not, how can I have multiple monitor support for my NB520? I need for using a Pewerpoint 2007 (to display presenter view differs from audience view).
Many thanks for an answer in advance.

Hi smit_Aood,
The NB520 supports one external monitor and you can use internal + external monitor at the same time (two monitors are supported). Furthermore you can choose if you want to extend the desktop on second monitor or clone it.
Using FN+F5 key combination you can switch between different modes.
Last but not least you can also use a Beamer or TV as second monitor. A certain computer monitor is not required. ;)

Multiple Monitor support using RDP in Windows 10

Does anyone know if you can use multiple monitors when connecting through RDP in Windows 10? In Windows 7, you need to be using Windows 7 Ultimate in order for RDP to support more than one monitor.
For example, my home setup has (2) 22" monitors and I want to RDP to my work PC which also has (2) 22" monitors. We are running windows 7 Pro, so only one monitor would display on my home PC and I couldn't view my 2nd work monitor.
Thanks!

Michalsm2000,
I can't test that due to the shortage of resources.
For the RDP multiple Monitor support, it should be supposed to work on Windows 10.
Regarding what is new in RDP, you may check:
What's New in Remote Desktop Services in the Windows Server Technical Preview
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

"HSM Support Not Available" Error

Hi,
I'm trying to configure an HSM credential under LiveCycle ES2. I've done all the steps listed in the documentation (established a Network Trust Link, assigned the client to a partition, etc.). I'm able to run the demo app provided by the HSM vendor and am able to talk to the HSM. When I try and configure the credential from the LiveCycle adminui, the Test HSM Connectivity fails with the following error in the log:
2010-01-25 16:06:50,561 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:06:53,817 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:07:08,508 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:07:08,509 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException HSM Support not available (in the operation : getCredential)
2010-01-25 16:07:08,594 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:07:17,329 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:07:17,332 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException HSM Support not available (in the operation : getCredential)
2010-01-25 16:07:17,354 INFO [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
2010-01-25 16:07:17,362 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException HSM Support not available (in the operation : getSlotsWithTokens)
2010-01-25 16:07:17,363 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
ALC-DSS-300-000 Generic SignaturesBaseException HSM Support not available (in the operation : getSlotsWithTokens)
com.adobe.livecycle.signatures.hsm.HSMProvider.getSlotsWithTokens(HSMProvider.java:202)
com.adobe.truststore.dsc.HSMCredentialHelper.listSlots(HSMCredentialHelper.java:101)
com.adobe.truststore.dsc.CredentialServiceImpl.listSlots(CredentialServiceImpl.java:482)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
sun.reflect.GeneratedMethodAccessor388.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.jboss.invocation.Invocation.performCall(Invocation.java:359)
org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 73)
org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
org.jboss.ejb.Container.invoke(Container.java:960)
org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
$Proxy177.doRequiresNew(Unknown Source)
com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
com.adobe.truststore.ui.impl.TrustStoreProxy.getSlots(TrustStoreProxy.java:903)
com.adobe.truststore.ui.struts.actions.UpdateHSMCommonAction.execute(UpdateHSMCommonActio n.java:63)
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:1 73)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
com.adobe.truststore.ui.TSAuthFilter.doFilter(TSAuthFilter.java:63)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
org.apache.catalina.core.ApplicationFilterChain.doFilter
Any idea on what the problem might be? Has anyone seen this before?
We've configured HSMs on previous versions of LiveCycle before however this is our first attempt under ES2.
Regards,
Rob

Ouch! That's exactly what the problem is. I'm using a 64-bit OS and 64-bit JVM.
Can you point me to where in the docs this is? The docs for 9.0 are not organized by product so I'm having some trouble finding it. I've checked the
"Preparing to Install", the "Installing and Deploying on JBoss", the "Administration Help", and the "Release Notes". None of these mention the issue.
Thanks for the help.
Regards,
Rob

PE8: Folder Monitoring Service not available?

I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
Do you have any similar problems or suggestions?
Friendly
Philipp
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
http://ferienhausbretagne.tumblr.com

I've bought the german version of PE 8. It could be a nice program, but there are still some bugs/problems - despite it works *very* slow on my Lenovo W500, 8 GB RAM, 2,8GHZ Dual Core, Windows 7 64.
If I go to "Organizer" and then use the menu "File" -> "Folder monitoring" there comes a message "Der Ordnerüberwachungsservice ist nicht verfügbar" which should mean translated "Folder monitoring service not available" (I hope that this translation is OK?).
I even looked into Windows -> System Control -> Services and searched for a stopped service like that - but I couldn't find any.
Do you have any similar problems or suggestions?
Friendly
Philipp
Lenovo W500, 2,8 Ghz T9600, 8GB RAM, Windows 7 Pro 64-Bit
http://ferienhausbretagne.tumblr.com

Chat Support Not Available in my country

I am trying to reach the chat support as I am a premium customer. However, when I click on Chat I got the following message:
"We apologize that chat assistance for business customers is not available in your region"
What are the alternative direct communication (Phone number, email...) available to me?

Seems you tried chatting with our business sales team which is only available in selected regions.
Customer services chat in English is available worldwide though for eligible users. Make sure you follow the contact option described here: contact customer service
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Multiple monitor support is broken in 10.9.3 update

One of the biggest reasons I bought a 2013 Mac PRO was the advertised claim that "It supports up to three 4K displays running simultanously".
I need this kind of pixel pushing power.
I do research and development that requires having a lot of information in front of me, so I run four monitors -- two Dell 2560x1600 monitors, and two DELL 1600x1200 monitors, with appropriate adaptors to convert mini-displayport to DVI and dual-link DVI (at significant additional cost).
Up until today, it was all running beautifully and flawlessly.
Today, I updated to 10.9.3, and only two monitors come up. I tried rebooting, tried turning moitors on and off, tried unplugging and replugging in the monitors. I can get any two of the monitors to work, it just depends on which two I plug in first, and it doesn't matter which ports I plug them into. In any arrangement, it only sees the first two monitors I plug in and the last two just stay black. System Preferences only knows about those first two.
Does anyone know if it's possible to downgrade back to the previous version of the OS and how?
Or, does anyone know about a workaround?
Does Apple even care anymore?

hkruse: Thank you! Fortunately I did have a TM backup from before the update. It worked flawlessly. But I wish there had been a manual with this machine including such wonderful tidbits of info. How are we mere mortals supposed to find this stuff? Posting to this message board and sloghing through the hit-or-miss responses is wasteful and tedious. I lost most of one day and one morning because of this "update'.
It makes me wonder how many millions of person-hours are lost that could have been avoided by one or two engineers taking their job a little more serioustly, with a management staff that backs them up?
When I worked at IBM (early 1990s), I was on the QA team for AIX. We had a whole roomfull of technicians who were constantly developing, refining, running and documenting suites of regression tests on AIX and every enhancement in the pipeline. Does no one do this anymore?
I've also contributed to Linux back in the 90's and was shocked at how easy it was to get code included in that package-- one of the reasons I don't trust Linux today (I love it for a playground environment, but I'd never rely on it for serious work!)
Companies like Apple and Microsoft have a social reponsibility to make these critical systems efficient and reliable. I wish they'd spend a lot less time making things cute (the bouncing text bubbles in the IOS texting app, for instance, or the skeumorphic shifting background on IOS home screens, etc.) and spend more time and effort to make things rock solid, so they "just work". That was the reason I switched to Apple eight years ago. Not because it was pretty.
Go ahead and make it pretty, but don't stop at "it works", keep going until you're sure it won't fail. It's easy to write code that works. Harder and more important to write code that won't fail. Anyone who doesn't understand the differrence is not a seasoned coder.
Thanks for Time Machine. I'd be screwed without that. Now please give us the documentation to use it! (and the PRAM, the SMC, anything else that we ought to know about to rescure us from these premature, half-cocked updates...) Here's an idea: Print a reference manual and put it int he box with a new machine. I make educational model kits these days, and every one of my products comes with a manual. If I can do it, why can't you? A 70 page perfect-bound manual costs less than $2 to print. Seriously.
Does anyone know how to disable these App Store update reminders? I hate having to click "remind me later" then "tomorrow" every day... I won't be installing any more updates without researching them first (and what a further waste of time that will be!)
Treat us right Apple. Be responsible.

Multiple Monitor Support

Is it possible to run more than 1 external monitor from my MacBook? I have an early 2008, black Macbook and would like to add a 2nd external monitor.

I plan to use the Matrox DualHead2Go DP (DisplayPort) Edition to run two external monitors off of my MacBook. I don't think you will find many reviews on it yet since it isn't available at stores. I think it is scheduled for Q3 of 2009. It is a bit pricey, ~$230 for the 2-display version. Matrox is a company that has been around for a long time and is incredibly reliable. They were the first company (I think) to make a dual-display PCI video card for desktop computers, long before it was commonplace. I consider them the multi-monitor solution king for professional environments.
http://www.matrox.com/graphics/en/products/gxm/dh2go/
The only other option I can find is USB to DVI, but most reviews that I read are not very good.

Multiple monitors support in mission control?

I have two monitors, a Wacom Cintiq and my MBP and i want Mission control to interact between the two spaces, not have them work with independent spaces that move together when i make the "swipe" gesture. Either they should SWITCH between spaces depending on which screen i have my cursor on, or they should SCROLL from one monitor to the next..
thoughts? help?

Do you have 3 displays, 2 monitors+1 MBP display? Are you using the term space to mean the combination of all of your displays, a specific display or something else? I have a MBP and 1 external monitor and I would like to understand what you are saying.

Multiple Speakers Choice Not Available

I downloaded fitmware update for airport express (apple base station 6.2)
Now I can only connect to one set of speakers at a time.
I used to be able to check mark a box "multiple speakers" and play music in different rooms. Now I can only choose one room at a time.
I dowloaded itunes 7.0.2.16 again, but no fix.
Please advise.

http://www.apple.com/support/downloads/airportexpressfirmwareupdate63forwindows. html
You need to be running Airport Express Firmware 6.3 and iTunes 6.0.2 or later.
From the Airport Express FAQ
http://docs.info.apple.com/article.html?artnum=108038#9
Question: Can iTunes send a single AirTunes stream to multiple AirPort Express stations?
Answer: Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware 6.3. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.
iFelix

Satellite P70-A: monitor profile not available/unable to set other profiles

Hello.
I have bough last week a new Toshiba notebook (P70-A-11Q) which has Windows 8.1 preinstalled on it.
It seems that the device has a problem with the monitor profiles.
When i watch images on a non profile managed software, the images look fine.
Once i import them on Lightroom or Photoshop, the images get a yellow tint.
This is what i see: Left (Lightrom), Right (Irfan) [Yello Tint|http://i1252.photobucket.com/albums/hh565/rockreactor/Clipboard05_zps092c5501.jpg]
Unfortunately i have tried to add sRGB on my profiles but even after restarting i did not see any change.
From what i have noticed the operating system did not have any profiles set at all before.
I know that selecting an sRGB profile is not a great solution and i should rather calibrate my monitor.
The question is why don't the profiles take any effect on my notebook monitor, no matter which one i choose.
Could it be that there is some conflict with the Intel display driver ?
Can Toshiba support such an issue under warranty ?
I believe its not my responsibility to get a totally uncalibrated monitor, or at least a laptop without some suggested profile.
Thank you in advance

Hi mate
> Can Toshiba support such an issue under warranty ?
First of all warranty does not cover any software issue. The warranty covers only hardware problems.
But I dont think also that this could be a software problem. I guess its just an settings issue.
I recommend you to check if the option +Use Windows display calibration"+ is turned ON
- Open the Color Management control panel.
- Go to the Advanced tab.
- Click "Change system defaults..."
- Go to the Advanced tab in the Color Management - System Defaults dialog.
- Turn on "Use Windows display calibration" and click Close.
- Now go back to the Devices tab, change profiles there and click "Set as Default Profile" as usual.
You can also go through the built-in Windows calibration feature ("Calibrate display" button in the advanced tab)

IBooks PDF support not available in iPod touch 3rd gen!!???!?!?!?!

I installed the iBooks app in my 3rd gen iPod touch today and I can sync books I bought in my iPad pretty well....but I do NOT have PDF support!!! (After I updated the app my iPad was capable to do so)
I've seen screenshots in Engadget and other sites that are running the same app in different iPhone 3GS as well as in 3rd gen iPods....so, why can't I have the feature in mine!!!
Does anybody knows whats going on with it? Plz help!
UPDATE: I've checked Apple's page for the iOS4 update for the iPod touch, and the PDF viewing option in the iBooks app DOES APPEAR on the official screenshot!!! Check it out!
http://www.apple.com/ipodtouch/ios4-software-update.html

Duh...you just have to drag and drop PDF's into iTunes and they'll appeat in the Books Section

Merging multiple pdf files not available

I want to merge multiple PDF files into one PDF file. I used to be able to do it under file>create pdf, but ever since my computer was re-built, that option is no longer under the file tab. Was this something extra that you had to pay for, or do I have to do something to get this add in. Thank you in advance

Yeah you need one of the acrobat family. To be specific, Acrobat Standard, Acrobat 9 Pro or Acrobat Extended
They have 30 day trial on adobe.com. But check first the system requirements so that it won't mess up your computer.

Multiple projects assignment not available in RfC

We are using SAP Solution Manager 7.1 SP11. We are using ChaRM and creating change documents with the transaction ZMCR. We are using multiple projects with different systems. We have the following situation:
M_ERP_0002 (maintenance project of ECC+BW+PI+TM)
•    Development - Test - Acceptance - Production (ECC)
•    Development - Test - Acceptance - Production (BW)
•    Development - Test - Acceptance - Production (PI)
•    Development - Test - Acceptance - Production (TM)
M_SUP_0001 (maintenance project for Solution Manager)
•    Dev - Test - Prod
Now we have an RfC which is valid for the whole landscape. This means on all systems the change must be done. For example SAP security Notes. We create an RfC which is approved by some people and in the impact analysis it is said the change is necessary for all systems.
But the problem is that we can choose only one project in an RfC. For example we choose M_ERP_0002 and fill in all systems in the request for change scope.
Now we want to create the Normal Change for the M_SUP_0001. But when we look at available projects, we see only the M_ERP_0002. We are missing now the M_SUP_0001, so we can not create a Change for all systems on one RfC.
Summarizing: We want to use one RfC (with all required approvals) and create the changes for all the systems (eq multiple projects) , so we don’t have to go trough the complete approval process again for the systems under a different project. We want an RfC and not multiple to do the same change on multiple systems.
Are there more SAP users with the same situation and how I have to solve this?

Hi Richard,
It is more like the business requirement and then design of change management you want to use.
Therefore, it is not mandatory to have one project but easier to use that way again w.r.t business requirements etc
You still can have multiple project and can go ahead with your requirements but then you need to adapt the various Import strategy as mentioned in the document like
Status dependent import
Selective import on status or combination etc
Again if you ended up in more complex criteria where it can't be achieved without any config then definitely need to go for development but avoid as much as you can otherwise it will be big impact during upgrade.
Thanks
Prakhar

Leadtek A280 TD (TI-4800SE) Multiple monitor support not available on

Similar Messages

Maybe you are looking for