LEAP, ACS 3.1 Active Dir username changes

We have an active directory domain.
We have users with 350 pcmcia cards in their thinkpads connecting to 1200 APs set to allow authentication to an external DB (the AD domain).
Everything was happy until a user got married.
Her name changes.
My day is ruined.
Now, when she logs in the ACS server flags it as a failed attempt instantly. I can replicate this perfectly. It doesn't allow her to login. When she sits down at a wired machine she can login with no problems. So we know the account is good. What I can't understand is why, if we're set to pass unknown users and all authentication to the external DB (AD domain), this doesn't work? Surely the ACS server should just treat this new username as unknown and bounce it to the AD domain?
Anyone seen this before? Or perhaps more importantly anyone fixed this yet? I've posted over at CCO on the cisco site and no luck there yet. I've also googled extensively and nothing of use. Lots of info on password changes but nothing on username changes.
many thanks
J
note: edited for clarity

What does the error in the "Failed Attempts" log say on the ACS server?
Is there a single AD domain in your org? If there are multipel domains, could there be a user with the same username in another domain that ACS is checking first?

Similar Messages

  • LEAP - ACS Authen. against active directory for users of another domain

    We installed ACS 3.0 on W2000 server, member of a domain. When we tried
    to authenticate users from another domain, but it failed.
    We achieved to find out the problem. First, the server tries to find the PDC of the other domain (DNS request : _ldap._tcp.pdc._msdcs.domain). The DNS
    server answer with the full name and IP address. But afterwards, instead of using the DNS answer, the server make a new request with the PCD name
    and appending its own domain. The DNS request fails, and the user is not authenticated. A workaround consists in chaging the DNS search-list for the server, but I'm intersted if anyone had a better solution, or if the new release (ACS 3.1) solves this issue.

    Your case looks similair to this bug CSCdy18833, the bug has a work around also check it out.

  • Internal Error when viewing an activity in E-Rec after a username change

    Hello,
    Hereu2019s a brief explanation of the scenario that we are in:
    u2022 We created a new User ID for an employee because of his/her name
    change.
    u2022 We then attached this new User Id to her HR master records using Info
    Type 105 (IT0105) subtype 1 (ST01).
    u2022 This employee already had her previous User ID attached to his HR
    master records using the same IT0105 ST01. So now, this employee has 2
    IT0105 ST01 records.
    u2022 We transferred these records (old and new ids) to E-Recruiting via
    ALE process.
    To do this ALE process, we executed RBDMIDOC program on the system
    where our HR Master Data reside.
    u2022 Then in our e-recruiting system, we executed RBDAPP01 to process
    these idocs.
    u2022 This processing delimited the old User ID and created a new User ID
    for the same person in the e-recruiting system. We can view this
    relationship in HRP1001.
    u2022 Now, prior to her name change, this person had performed some
    activities on a candidateu2019s records in E-Recruiting. Obviously, these
    activities were performed with his old user ID. So those activities
    have the old user ID associated with them.
    u2022 After sending the new User Id in e-recruiting, when we go to view
    those candidate activities in candidate overview, the system throws the
    internal error message.
    The format that we use for creating usernames is last name first letter of first name, i.e. Bob Jones would look like JONESB.
    At present the only way to remedy the situation is to have the recruiter who's name (and username) changed manually change it for each activity.
    After opening up a message with SAP they responded with:
    Dear Customer,
    That's right. The reason why this recruiter doesn't see his/her
    activities is because they were created under a different user.
    E-Recruiting is designed with a stable CP-US relationship. If you
    do a delimination this can cause problems for the recruiter (as
    mentioned above) as in IT5131 the user is stored as team member.
    If the user assigned to a CP changes, the responsible candidate class
    cannot be instanced anymore. So we strictly recommend not to delimit theCP-US relation.
    Has anyone else experienced the problem?  How did you address it?  It has been my experience to use the name of the employee when creating a username.  This has never been a problem in our core system, just in E-Recruiting.
    Thank you for your help!
    Regards,
    Ryan

    DonSu,
    You have to look at the line above it to gather what's happening.  As I mentioned it making a call to get the contents of the Data Source using GetDataSourceContents.  What you might try is making the same call using Microsoft APIs and PowerShell.
    http://technet.microsoft.com/en-us/library/reportservice2010.reportingservice2010.getdatasourcecontents.aspx
    [string]$folderDestination = "/<Path to Data source>"
    [string]$webServiceUrl = "https://EnterURLhere/ReportServer/ReportService2010.asmx"
    $ssrsProxy = New-WebServiceProxy -Uri $webServiceUrl -UseDefaultCredential
    $DatasourceContent = $ssrsProxy.GetDataSourceContents($folderDestination)
    $DataSourceOutput = $DatasourceContent | Select-Object ConnectString, Extension, Enabled, UserName, WindowsCredentials, CredentialRetrieval
    Write-Output $DataSourceOutput

  • Activation error while changing the data type of a field of a table

    hi friends,
    i am facing one problem while changing a data type of a field of a table.
    i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
      while changing to NUMC data type activation error is comming as below.
    Table is not yet classified                           
    Field ZTOTAL_COUNT: Type change                       
      ALTER TABLE is not possible                         
    Structure change at field level (convert table YQM32) 
    Check on table YQM32 resulted in errors   
    Table YQM32 could not be activated                       
    (E- Structure change at field level (convert table YQM32)
    plz suggest.i need to change the data type from char to numc.
    Thanks & Regards

    Hi Pabitra......
    From the SE11 change the table as u wanted and then from menubar select
    UTILITIES--> DATABASE UTILITY
    It will open database utility
    there u select the Activate and adjust database button.
    then the database table will get adjusted.
    just try it once.........
    Suresh......

  • Service Master / Activity Master description change Issue

    Dear Experts,
    I am facing problem with Service master / Activity Master description change problem.
    Steps in the problem -
    1) Service Master / Activity Master created.
    2) Long term purchase order (with large quantity) is created.
    3) Service entry sheet and Invoice has been posted for the Purchase Order.
    Due Service master / Activity master description change requirement from client, description of the
    Services are changed.
    But it is not updated in Purchase order. (As purchase order has been created before service master description change)
    and when i am trying to post next service entry sheet with reference to the long term purchase order created,
    it is not adopting the new one service description.
    Thanks in Advance

    Hi Kiran
    The solution to your issue could be achieved as follows:
    In the item level 'Service' tab for the corresponding PO line item, change the quantity to which you have already made Service Entry sheet. Then create a new line item with the Service number, once you enter the Service number you would see the new description here. Then when you create a Service Entry sheet with reference to PO, the system would ask you to select one of the two entries you have in PO. Here select the new entry which you have made.
    Thanks
    Prashanth

  • Activation of the change list canceled

    Hi Guys
    I am doing the SOAP to FILE Scenario using BPM when I activate my Integration Processes (Soap_to_file_BPM ) i get the below error, on my IM the source is "yonela_ob_mi" and the target is "yonela_ob_mi_AS" which is my abstract.Then on the Transformation step my container is Abstract Interface. This "yonela_ob_mi" interface I am using on my message mapping
    So what am I doing wrong
    Activation of the change list canceled Check result for Integration Process Soap_to_file_BPM | http://yonela.com:  Expression must return the interface type yonela_ob_mi
    Thanks
    Yonela

    Hi Guys
    Thanks for ur assistance its working the error is gone, I only needed to make both my Interfaces to be Abstract as u suggested.
    Only one error now when testing on sxmb_nomi I get the bellow error: What I want to do is to split flat file and send it to my ftp server (InBound) folder.
    On my have MM i have created Node Function the is spling by value
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">GENERIC</SAP:Code>
      <SAP:P1>Split mapping created no messages</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Split mapping created no messages</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks
    Yonela

  • Windows Activation: An unauthorized change was made to Windows

    I have master image of windows server 2008 r2 giving the error Windows Activation: An unauthorized change was made to Windows
    Report of MGADiag is below
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 50
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-X63PK-3K798-CPX3Y
    Windows Product Key Hash: OgEPjV3PqwYHwGdIuGHt5s4zUk0=
    Windows Product ID: 00486-001-0001076-84288
    Windows Product ID Type: 1
    Windows License Type: KMS Client
    Windows OS version: 6.1.7601.2.00030112.1.0.010
    ID: {551732E7-DDA3-4106-9134-CA4A4DCBC0EF}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows Server 2008 R2 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_gdr.130708-1532
    TTS Error: T:20141128234401903-
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 100 Genuine
    Microsoft Office Access 2007 - 100 Genuine
    Microsoft Office Project Standard 2007 - 100 Genuine
    Microsoft Office Visio Professional 2007 - 100 Genuine
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: 10.1.82.175:8080
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{551732E7-DDA3-4106-9134-CA4A4DCBC0EF}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00030112.1.0.010</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-CPX3Y</PKey><PID>00486-001-0001076-84288</PID><PIDType>1</PIDType><SID>S-1-5-21-4126316475-437469936-4238727085</SID><SYSTEM><Manufacturer>VMware,
    Inc.</Manufacturer><Model>VMware Virtual Platform</Model></SYSTEM><BIOS><Manufacturer>Phoenix Technologies LTD</Manufacturer><Version>6.00</Version><SMBIOSVersion major="2" minor="4"/><Date>20120702000000.000000+000</Date></BIOS><HWID>9BA73D07018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pakistan
    Standard Time(GMT+05:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product
    GUID="{90120000-0015-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Access 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89384-707-4159871-63452</Pid><PidType>14</PidType></Product><Product
    GUID="{90120000-003A-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Project Standard 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89402-707-4159871-63502</Pid><PidType>14</PidType></Product><Product
    GUID="{90120000-0051-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Visio Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89405-707-4159871-63127</Pid><PidType>14</PidType></Product></Products><Applications><App
    Id="15" Version="12" Result="100"/><App Id="3A" Version="12" Result="100"/><App Id="53" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
    Spsys.log Content: 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
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows Server(R), ServerEnterprise edition
    Description: Windows Operating System - Windows Server(R), VOLUME_KMSCLIENT channel
    Activation ID: 620e2b3d-09e7-42fd-802a-17a13652fe7a
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00486-00168-001-000107-03-1033-7601.0000-3332014
    Installation ID: 022225566050856255735015797960696152737732162986145894
    Partial Product Key: CPX3Y
    License Status: Notification
    Notification Reason: 0xC004F056.
    Remaining Windows rearm count: 5
    Trusted time: 11/29/2014 12:20:56 AM
    Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: MAAAAAEAAgABAAEAAgABAAAAAQABAAEAJJROJaQRDFzmt0R8/BTnIWzaY6lla85W
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name    OEMID Value    OEMTableID Value
      APIC            PTLTD              APIC  
      FACP            INTEL         440BX   
      SRAT            VMWARE        MEMPLUG
      WAET            VMWARE        VMW WAET
      HPET            VMWARE        VMW HPET
      BOOT            PTLTD         $SBFTBL$
      MCFG            PTLTD         $PCITBL$

    I have master image of windows server 2008 r2 giving the error Windows Activation: An unauthorized change was made to Windows
    Report of MGADiag is below
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Windows Product ID Type: 1
    Windows License Type: KMS Client
    Windows OS version: 6.1.7601.2.00030112.1.0.010
    <...>
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    <...>
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows Server(R), ServerEnterprise edition
    Description: Windows Operating System - Windows Server(R), VOLUME_KMSCLIENT channel
    <...>
    License Status: Notification
    Notification Reason: 0xC004F056.
    Remaining Windows rearm count: 5
    Trusted time: 11/29/2014 12:20:56 AM
    Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
    Check your event log (on both this KMSclient, and also on your KMShost):
    Look at the events from source = Security-SPP  (SPPSVC)
    http://technet.microsoft.com/en-us/library/ee939272.aspx
    Also, we can see that there seems to be "tampering" occurring with the files for "Windows Activation Technologies":
    C:\Windows\System32\Wat
    You may need to first attempt to re-activate with your KMShost (use slmgr.vbs as advised by the logfile).
    If this does not succeed, you may need to perform integrity checks on the WIndows files:
    eg: SFC /scannow
    eg: CheckSUR http://support.microsoft.com/kb/947821 
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Need detailed info about Active,New and Change log table in BI 7.0

    Dear Experts,
    I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
    And also i am requesting you all to give tips to how to study BI 7.0
    Regards,
    Ameer.N

    For your first problem solution is this note: 936644
    You might have not mapped the filed in your tarnsfer/update rules?

  • Activation of the change list canceled Error Message

    I am getting the following error message every time I try to Activate or Test my message mapping :
    Activation of the change list canceled Check result for Message Mapping bww2jb_activate | http://bww.bit.com/card:  Mapping not sufficiently defined
    Anyone have any idea what could be causing this?

    Hi Andrew,
    You have not mapped some of the mandatory parameters in your mapping and tried to activate it. so it was  giving you that error. So map all the mandatory parameters ( all the fields with Red bulb), save and then activate.
    This will solve your problem. kindly assign points if this solves your problem.
    Cheers,
    Siva Maranani

  • Activity rate is changing in every period

    Hi Gurus ,
    I am facing problem when we are using KP26 there we have given activity rate for the first time from period 1 to 6 as usd 1/min
    and for period 1 to 7 same figure usd 1/ min .
    but when i go back and see activity rate for period 1 to 6 it is changing to usd 0.90/min .
    here distribution key is 2 and we have set indicator AVERAGE PRICE and price indicator as 1 .
    my client requires that rate of activity should not change .
    please help me on this as it very critical .
    thanks and regards
    abhi

    Hi
    So should i remove distribution key or change distribution key which could resolve my problem
    rgds
    Abhi

  • Problem in uploading data from psa to active data and change log dso.

    hi experts
    my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

    Uday,
    Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
    In case of Write optimized DSO you need not to activate it.
    Regards,
    Ramkumar.

  • Skype username change?

    Hello!
    So I've had this account for many years, but since it is possible to get an IP via Skype calls and so on.
    I would like to change my username, since I removed many contacts that I don't know and don't want
    them in my list.
    Is it possible for me to change my username?
    I only ask for username-change, nothing advanced. I would really like this to happen
    since I really want to protect my identity. I've had some DDoS attacks lately too.
    kind regards,
    Gabz

    Please see this: https://support.skype.com/en-us/faq/FA110/Can-I-ch​ange-my-Skype-Name
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Reporting on SR Owner Change, Activity Due Date Change

    We have few Report Requirements around Audit Trail. We are looking for Reports where we could Track Service Request Owner change, SR Status Change, Activity Due Date Change etc. As we know, In CRMOD Analytics, we cannot report on Audit Trail or use the PRE() function. Can anybody suggest any other ways for reporting on the Changes where we could show each and every change made to these fields and not only the previous values.

    Lets Say you want to track status Change in SR. There are two ways of doing it.
    Option 1:
    Create a Long text field in SR page.
    Name it "Track Status Change". Do not Display the field to the users.
    Default the Field to Initial Status+","+Now().
    When the Status Changes, you need to append the field with "Current Status"+","+Now()+";"
    The Semi Colon is delimiter to show that this is the new status. This delimiter would be used in the report to seperate the status. You can achieve this using the reporting functionalities.
    The down side of this is that it can affect the performance of report since lot of Sting functionalities would be used for the tracking.
    Option 2
    Whenever the status changes, create a completed task. Populate the Subject of the task with the Status. Put a workflow/field validation so that no one edits the subject when the task is created automatically.
    You can run a report on the Task Created Date and Subject to get the Audit Trail.
    Let me know if this helps.
    Paul Swarnapandian.

  • KP26_intergration with excel Plan Activity can only change some period

    Dear Expert,
    We use kp26 intergrate with excel, when uploading Plan Activity can only change some period. (Uploading is successful)
    So, we've used same Layout and change data in KP26 directly for testing.
    (Only period 1,2,11 in 2010 can be changed, other periods remind the same)
    Second testing, we've change data in period 3-10 & 12, and it showed the following message.
    ***No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary.***
    It's quite doggy. Plz help.
    Thanks

    Hi
    How about using an LSMW? I always prefer to use it and find it very comfortable as compared to Excel
    Regards
    Ajay M

  • Abt master data activation and attribute change run

    There is any difference between master data activation and attribute change run

    Hi,
    Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
    Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
    For attribute change run we have direct tcode: RSATTR or  In the main menu, choose the path Tools Hierarchy/Attribute Change.
    regards
    KP

Maybe you are looking for