Leap and Radius! Other brand cards that are compatible
Our network guys are fixing to build a wireless network with the Cisco Leap and a Radius server for authenticity. I need to know if Cisco is going to make a wireless card for the Compact Flash slot. I have some Tablets and PDA's I would like to use but the don't have PCMCIA slots. If not are there other companys that have wireless cards that are compatible with this authenticity. I am currently working with Symbol Technologies. They say their card will work with this authenticity. The only authenticity I see in the settings on this card is for Kerbos. Does Kerbos work with a Radius server? If not can they build a Kerbos server to be a second way of authenticating the user on the wireless network?
When symbol says their CF card will work within the LEAP architecture, they likely mean using MAC authentication. While it is possible to run LEAP and MAC authentication concurrently, it does significantly weaken the security provided by LEAP alone. It is relatively easy to capture and spoof a MAC address that is valid using simple tools.
Symbol has recently licensed the LEAP architecture from Cisco, but does not yet have any products available supporting this. I have not heard of specific plans for supporting LEAP on their CF product.
Symbol is, however, your best hope for CF/LEAP support. They are partnering with Cisco and, as stated earlier, they have already licensed the LEAP architecture.
Cisco's current product line will not support the Symbol Kerberos security mechanism (at least not in any way I've seen).
Similar Messages
-
When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?
Hi Angela1313,
I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
iTunes Gift balances
http://support.apple.com/kb/ht5035
Learn more
Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
The headteacher has just upgraded his Ipad to I07 and when he goes into the school shared calendar any all day events come out red and then other events on that day are obscured as the red covers the whole day
I have the same proble. In all views all day events don't show up. If I search for the event, there is a result but it does not appear in the calendar.
-
cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?
Try restarting your WiFi router by removing power to it for 30 seconds.
-
I have a late 2009 iMac, with the default Nvidia 9400 Graphics card.
I was wondering what my options are for upgrading. I use Windows 7 via Bootcamp, so I need a card that is compatible/has available drivers.
This is for gaming. On the lowest settings of "Call of Duty 4", I get about 100 FPS... Was hoping to be able to play on higher resolution w/o the fps lag.
I'm not good with the hardware part of computers at all, but know how to get around the OS.In most cases the graphics cards in iMacs are Not upgradeable. They are usually soldered to the logic board. RAM is considered, along with harddrives, the only component that is upgradeable in an iMac, unlike in PC's. So basically you would need to sell your unit and purchase an iMac with a more powerful graphics card.
Hope this helps -
Which Macs have graphics cards that are specifically designed to work best with CS6?
I'm currently using a late-2009 24" iMac but it just isn't robust enough for some of the the programs included in CS6 (After Effects, Premiere Pro, for example). I'm planning to buy a new Mac, but I would like to know if there is one or more that has/have graphics cards that are specifically designed to work well with CS6, and if not, were I to purchase a Mac Pro, would I be able to replace the factory graphics card with an after-market card that does? Thank you.
If you are not in the 4K business --> I would go for the 32 GB & 27" iMac w/o Retina, the NVIDIA GeForce GTX 780M mit 4 GB GDDR5 (CUDA support) will give you quite a good performance, i.e. with a Thunderbolt connected Raid6 system your 2K projects (including some color correction and other plugins) will work well and you can even use the system as 4k starter/test system.
If you in the 4K business you could use a full blown iMac Retina system with a GPU AMD Radeon R9 M295X mit 4 GB GDDR5 together with an already mentioned TB Raid6 system. As described from the forum-compatriots, this non-CUDA card doesn't perform too well on GPU accelerated functions of PPro --> but --> search this forum... you will be surprised....some workflows are nearly unaffected....
If you are in the high end 4K footage busine$$ and you apply a lot of external color correction to your 4k footage (e.g. BM DaVinci) I would go for a MPro with 2 D700 cards. -
I have an iPhone 5c and want to play songs that are stored on my PC iTunes library, but were not bought through iTunes. How do I do this?
Hi there eramhar,
It sounds like you are wanting to sync your music to your iPhone. If so, you may find the information in the article below helpful.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
-Griff W. -
Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista
I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer -
Details: On my MacBook Pro, I have MacOS X 10.6.8, a 2.26 GHz IntelCore Duo processor with 4 GB 1067 MHz DOR 3 Memory.
I have iMovie Version 9.0.4, which I apparently updated inJuly. I regularly used iMovie, and last used it about 3 weeks ago. However, Today, when I try to get into iMovie, I get thefollowing message:
“Quartz extreme Required iMovie requires agraphics card that is compatible with Quartz Extreme. One or more of your graphics cards does ntosupport Quartz Extreme.”
So, I cannot get into my iMovie. I know the “Quartz Extreme” message ismistaken. WHAT DO I DO?I would recommend that you turn off and restart your Mac. That should clear it up.
-
I just bought a 5g iPod touch and was wondering if there were any ihomes out or coming out soon that are compatible with this device. I know there are adapters and cables you can purchase to use with your existing ihome but read the poor reviews on them and was scared away. I use my ihome very regularly and need this accessory to work with my new iPod. If you have any information on this, please help!
iHome already makes docks that support the Lightning connector:
http://www.ihomeaudio.com/products/#/?filter=28
Regards. -
I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. ThanksI have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
How can I read and write text in rings that are inside an array?
Hello All!!!
How can I read and write text in rings that are inside an array?
Regards and thanks in advance.Use a Property Node linked to the Ring inside the array.
Of course, all elements in the array will have the same text values.
B-)
Message Edited by LabViewGuruWannabe on 12-13-2007 09:47 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:48 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:49 AM
Attachments:
Strings-BD.PNG 17 KB
Strings-FP1.PNG 23 KB -
If I have video in imovie and final cut pro X, does that mean there are two copies of the video, one for each piece of SW? If so, how do I get rid of the imovie events and keep only the Final Cut Pro X events (video)? I don't want multiple copies of the same video stored on the hard drive.
If you import to FCP directly from the Camera or from a camera archive, you would likely import choosing Optimized Files which would go to a FCP event that is in ProRes 422 codec. This would be in addition to your iMovie Event which would import using the Apple Intermediate Codec. So you would have two copies of the same information. An AIC copy and a larger ProRes copy.
However, if you use FILE/IMPORT/iMOVIE EVENT LIBRARY, FCP will not duplicate the event files from iMovie. It will treat them as referenced files, and will point to the iMovie Event files in the reference. So there is no duplication. You will be editing Apple Intermediate Codec files in FCP.
However, FCP will create Event folders. In addition to the reference information, these will contain thumbnail files that are compatible with FCP, stabilization and analysis files that are compatible with FCP, as well as any intermediate render files that are associated with the Event.
So in this case, there is no duplication of the large event files, but there is some duplication of the small thumbnail files.
I have several terabytes of iMovie Events, which are now all available in FCP. Believe me, I would know if they were duplicated because all my disks would be full. -
I want to buy surveillance cameras and software that are compatible with Mtn Lion, what do you suggest?
You do have the ability to create good user interfaces with LabVIEW.
The main problem is what do you, or your customer consider a good user
interface.
The first thing I would suggest is to start using the "Dialog Control"
controls for your front panel. This set of controls pick up their style
from the operating system, so they will match the rest of the system
applicaitons.
Another thing is limit the use of color on the front panel. One persons
idea of a nice shade of blue can be another person eyesore. Instead,
use the decorations for grouping of controls.
I would stay away from ActiveX. It's interface is quirky at best and there is a lot of overhead involved.
Just to show it's possible, the attached images are screen shots of
user interfaces I've designed with LabVIEW. The first two use the
Dialog Controls, and the third uses standard controls and color at the
customers request.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
DMI_Tester.gif 73 KB
DIIDatalogger.gif 102 KB
Trackerr.gif 115 KB -
Are there any specific files (other than swf) that are not supported in the content viewer?
Are there any specific files (other than swf) that are not supported in the content viewer?
Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?
Maybe you are looking for
-
How to remove document from Flash drive after printing from a PC
Hi All, Here's my problem: Today I needed to print an MS Word file at a printshop, so I saved the document onto my Flash drive and took it to the shop. There, the staff printed the document from a PC and handed the drive back to me. Now, back at home
-
Problem with firefox and chrome
Hi guys, i've a problem with chrome. When i download something with google chrome and at the bottom i press on the file or show all downloads, i'm redirected to firefox :0 Tried also to uninstall firefox. No way, nothing happen if i press show all d
-
Hi everyone, ATP is being a real struggle for us and we are for a required balance of not missing out on deadlines and improving the service levels if possible within the constraints. For a product not in stock it or available at a later date, the M
-
Preserving Current Owner file permissions using the copy function
I've been trying to use ARD 3's Copy function to overwrite a single user's Home folder in a classroom environment made up of a few Macs. This is done with the aim of refreshing the Home folder every time a class is concluded. However, although the Co
-
We have a structure like this Parent Direct child 1 2 1 6 2 3 3 4 6 7 we want to generate the output as parent child relation if child is related to parent thro any hierarchy at any level parent child 1 2(since 1->2) 1