Leap failure after equipment reboot
Everything worked fine, but afer a power failure all the equipment rebooted (3560, 1100, acs, wlsm).
No 7920 fails to authenticate using leap (cckm+tkip). All configs look ok (all of the had been saved)
PEAP clients and wep client authenticate without any problems.
And one more problem
despite this
dot11/wlccp authenticator:
receive packet debugging is on
transmit packet debugging is on
process debugging is on
dot11:
802.1X module LEAP debugging is on
ldk-d-3ap10#
the only messages I get are
Oct 3 10:41:13.043: %DOT11-7-AUTH_FAILED: Station 0011.21ce.da30 Authentication
failed
Any ideas?
First impression would be that some config wasn't saved.
If using CCKM, need to ensure that 7920 is set to AKM and LEAP username and password are correct.
Would check the ACS logs to see if the request gets there or not. If so, should give a failure reason.
You can attach your AP config for review as well.
Similar Messages
-
Automatically start VMs after server reboot
Hello,
I use a OVM server (3.0.3) without clustering, and I'm doing failure simulations before going to production.
When the server reboots after a electrical failure, all VM are in "offline" state, and I need to acknowledge all events before be able to start them (thanks the forum for this information).
I would like to automatically boot the VM after the reboot, is there a way to do this ?
Thanks,
TMHave you tried to put a symlink to the vm.cfg in /etc/xen/auto? That works independent of VM Manager. I beleive VM Manager will update the machine to running in that situation. If not, at least your machines are running while you sort out the problems with VM Manager.
ln -s /OVS/Repository/<repositoryUUID>/VirtualMachines/<vmUUID>/vm.cfg /etc/xen/auto/<simplename>
Where repositoryUUID (hopefully the only one because the manager doesn't display it)
vmUUID shows as ID on the Info page for the VM
simplename is any name you like. I chose the name that shows as Name on the machine's Info page.
Let us know if the Manager figures it out OK or if you have to jump through some hoops to get it to show "running" for these VMs. -
Problem PAP2T reconnect after router reboot
Good Day at all,
I am italian user of VOIP system, and i find a big problem with the usage of
PAP2T adapter with italian NGI network and/or SQUILLO sip.
The problem is common to many many many, italian users:
when the WAN connection restart (after router reboot or temporaly internet failure) the adapter PAP2T don't want reconnect to the SIP server, i have test many configuration, and differet boot sequence of the router but the problem is always preasent.
but, if i change the SIP port with one other different, the system go online immediatly. when after this, i try to insert again the original SIP port, the systerm go down again.
(if i insert the original SIP port after Half hour, the system stay online)
I have disabled all protection and firewall of the router for test and make Port Redirect for all renge of port used form PAP2T but the problem is again preasent.
I have one XLS file with the detail of debug with all two cases.
At this poind i don't know if is a problem of server of NGI/SQUILLO (www.ngi.it) (sip.squillo.it) or is a problem of PAP2T firmware.
CAN HELP ME?
Best regards.It seems to be the problem with a router partaially it is pap2t firmware problem. At least I had a long investigation on a similar problem. The internet connection drops, but pap2t does not know it and keeps sending NAT Keep Alive and Registration Messages. The Internet connection comes up with a different WAN IP. But the NAT table of the router (udp connections) is corrupted. This is a known problem in *nix, and many routers have linux based firmware. To restore udp packeges going out the solution is to issue
echo 0 > /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout_stream
sleep 10
echo 180 > /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout_stream
After a long correspondence with firmware developers of my router it was implemented in the router's firmware. I do not have this problem now. It can be also fixed in pap2t firmware. Pap2t should not send NAT Keep Alive Messages if the registration fails.
Message Edited by Zyxmon on 10-10-2008 06:43 AM -
Hi,
Has anybody seen the issue below showing in the logs? The time for the logs messages switch from the real time (17:57) to some random time (10:55). There seem to be a disconnect with the time. I noticed right when the status message while logging in switches
to "apply user settings", the time get screwed up on the gpsvc.log file and switches to the random time (10:55) and keeps reporting that random time till "apply user settings" process completes and switches back to regular real time (17:57).
I made sure the server is synced up with w32tm /resync command. Tried different DNS settings. Tried dis joining and rejoining to the domain. tried to block inheritance on GPMC to that OU. Created new domain user. Deleted local profiles. All with no luck and
same behavior which is taking up to 5 min "applying user setting" only after a reboot. If I log in and out without reboot, it would log in just fine within seconds.
Any thoughts or suggestions are appreciated!
Thanks,
Here is a copy from the gpsvc.log:
GPSVC(338.354) 17:57:08:406 -------------------------------------------
GPSVC(338.354) 17:57:08:406 Use the Event Viewer to analyze the Group Policy operational log for details on Group Policy service activity.
GPSVC(338.354) 17:57:08:406 -------------------------------------------
GPSVC(338.354) 17:57:08:406
GPSVC(338.354) 17:57:08:406 InitializeProductType: Product Type: 2
GPSVC(338.354) 17:57:08:406 Register for connectivity notification is Enabled.
GPSVC(338.354) 17:57:08:406 Connectivity manager class initialized with for IntranetAuth connectivity
GPSVC(338.354) 17:57:08:640 Target = Machine
GPSVC(338.350) 17:57:08:640 Target = Machine, ChangeNumber 0
GPSVC(338.39c) 17:57:09:232 bMachine = 1
GPSVC(338.39c) 17:57:09:232 Setting GPsession state = 1
GPSVC(338.27c) 17:57:09:232 Waiting for connectivity before applying policies
GPSVC(338.27c) 17:57:09:232 Waiting for SamSs with timeout 8264
GPSVC(338.39c) 17:57:09:232 Message Status = <Applying computer settings...>
GPSVC(338.39c) 17:57:09:232 Target = Machine
GPSVC(338.39c) 17:57:09:232 Target = Machine, ChangeNumber 0
GPSVC(338.39c) 17:57:09:248 Setting GPsession state = 1
GPSVC(338.27c) 17:57:09:357 Waiting for NTDS.IndexRecreateEvent with timeout 8139
GPSVC(338.27c) 17:57:09:357 Waiting for NlaSvc with timeout 8139
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:576 UnLocked successfully
GPSVC(338.350) 17:57:09:576 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:576 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:576 Async Lock called
GPSVC(338.350) 17:57:09:576 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:576 Sid = (null)
GPSVC(338.350) 17:57:09:576 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:591 Sid = (null), dwTimeout = 1, dwFlags = 268435459
GPSVC(338.350) 17:57:09:591 LockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Async Lock called
GPSVC(338.350) 17:57:09:591 Reader Lock got immediately. m_cReadersInLock : 2
GPSVC(338.350) 17:57:09:591 Sid = (null)
GPSVC(338.350) 17:57:09:591 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:591 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:591 UnLocked successfully
GPSVC(338.350) 17:57:09:669 Sid = (null)
GPSVC(338.350) 17:57:09:669 UnLockPolicySection called for user <Machine>
GPSVC(338.350) 17:57:09:669 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.350) 17:57:09:669 Setting lock state as notLocked
GPSVC(338.350) 17:57:09:669 UnLocked successfully
GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
GPSVC(338.27c) 10:55:29:426 Waiting for MUP with timeout 6392
GPSVC(338.27c) 10:55:29:426 Waiting for wkssvc to signal MUP event
GPSVC(338.5bc) 10:55:29:519 Target = Machine
GPSVC(338.5bc) 10:55:29:519 Target = Machine, ChangeNumber 0
GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x16c
GPSVC(3b0.67c) 10:55:29:535 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.5bc) 10:55:29:535 Target = Machine
GPSVC(3b0.67c) 10:55:29:535 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3b0.67c) 10:55:29:535 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.6c4) 10:55:29:535 Target = Machine
GPSVC(338.5b0) 10:55:29:535 Target = Machine, ChangeNumber 0
GPSVC(338.5b0) 10:55:29:535 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(338.5b0) 10:55:29:535 LockPolicySection called for user <Machine>
GPSVC(338.5b0) 10:55:29:535 Async Lock called
GPSVC(338.5b0) 10:55:29:535 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.5bc) 10:55:29:535 Sid = (null)
GPSVC(338.5bc) 10:55:29:535 UnLockPolicySection called for user <Machine>
GPSVC(338.5bc) 10:55:29:535 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.5bc) 10:55:29:535 Setting lock state as notLocked
GPSVC(338.5bc) 10:55:29:535 UnLocked successfully
GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc18
GPSVC(338.754) 10:55:29:816 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.350) 10:55:29:816 Target = Machine
GPSVC(338.754) 10:55:29:816 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.754) 10:55:29:816 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.27c) 10:55:29:987 Done waiting for MUP
GPSVC(338.27c) 10:55:29:987 Waiting for DS with timeout 5830
GPSVC(338.27c) 10:55:29:987 Registered for NLA notification successfully
GPSVC(338.27c) 10:55:29:987 NlaGetIntranetCapability returned Not Ready error. Consider it as NOT intranet capable.
GPSVC(338.27c) 10:55:29:987 There is no connectivity. Waiting for connectivity again...
GPSVC(338.27c) 10:55:30:455 There is connectivity.
GPSVC(338.27c) 10:55:30:455 We have network connectivity... proceeding to apply policy.
GPSVC(338.27c) 10:55:30:455 NlaQueryNetSignatures returned 1 networks
GPSVC(338.27c) 10:55:30:455 Found a intranet+auth network
GPSVC(338.27c) 10:55:30:455 # of interfaces : 1
GPSVC(338.27c) 10:55:30:455 Interface ID: {9538E3E7-197E-4A34-82B6-F457DC25D35D}
GPSVC(338.27c) 10:55:30:455 Compartment ID: 1
GPSVC(338.27c) 10:55:30:455 Setting the CompartmentId [1] on the current thread
GPSVC(338.27c) 10:55:30:455 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
GPSVC(338.27c) 10:55:30:502 Started bandwidth estimation successfully
GPSVC(338.27c) 10:55:30:502 GetDomainControllerConnectionInfo: Getting Ldap Handles.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Server connection established.
GPSVC(338.27c) 10:55:30:502 GetLdapHandle: Binding using only kerberos.
GPSVC(338.27c) 10:55:30:518 GetLdapHandle: Bound successfully.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.27c) 10:55:30:518 ProcessGPOs: No site name defined. Skipping site policy.
GPSVC(338.27c) 10:55:30:518 GetGPOInfo: ********************************
GPSVC(338.27c) 10:55:30:518 GetGPOInfo: Entering...
GPSVC(338.27c) 10:55:30:533 GetMachineToken: Looping for authentication again.
GPSVC(338.27c) 10:55:30:580 GetMachineToken: Looping for authentication again.
GPSVC(338.27c) 10:55:30:596 GetMachineToken: InitializeSecurityContext failed with 0x80090324
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: Failed to get the machine token with -2146893020
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: Leaving with 0
GPSVC(338.27c) 10:55:30:596 GetGPOInfo: ********************************
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: GetGPOInfo failed.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Processing failed with error -2146893020.
GPSVC(338.27c) 10:55:30:596 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(338.27c) 10:55:30:596 CheckAndFireGPTriggerEvent: Fired Policy present UBPM trigger event for Machine.
GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
GPSVC(338.27c) 10:55:30:596 Application complete with bConnectivityFailure = 0.
GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd94
GPSVC(338.4d0) 10:55:32:281 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.4f0) 10:55:32:281 Target = Machine
GPSVC(338.4d0) 10:55:32:281 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.4d0) 10:55:32:281 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.384) 10:55:32:281 Target = Machine, ChangeNumber 0
GPSVC(338.384) 10:55:35:900 SID = S-1-5-21-1599696121-1964574698-334091239-301107
GPSVC(338.384) 10:55:35:900 bMachine = 0
GPSVC(338.384) 10:55:35:900 Setting GPsession state = 1
GPSVC(338.384) 10:55:35:900 Message Status = <Applying user settings...>
GPSVC(338.6c4) 10:55:35:900 Setting GPsession state = 1
GPSVC(338.718) 10:55:35:900 StartTime For network wait: 11200ms
GPSVC(338.718) 10:55:35:900 Current Time: 19546ms
GPSVC(338.718) 10:55:35:900 MaxTimeToWaitForNetwork: 7034ms
GPSVC(338.718) 10:55:35:900 TimeRemainingToWaitForNetwork: 0ms
GPSVC(338.718) 10:55:35:900 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(338.718) 10:55:35:915 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(338.718) 10:55:35:915 LockPolicySection called for user <Machine>
GPSVC(338.718) 10:55:35:915 Sync Lock Called
GPSVC(338.718) 10:55:35:915 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(338.718) 10:55:35:915 Lock taken successfully
GPSVC(338.718) 10:55:35:915 UnLockPolicySection called for user <Machine>
GPSVC(338.718) 10:55:35:915 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(338.718) 10:55:35:915 Setting lock state as notLocked
GPSVC(338.718) 10:55:35:915 UnLocked successfully
GPSVC(338.718) 10:55:35:915 GetDomainControllerConnectionInfo: Enabling bandwidth estimate.
GPSVC(338.718) 10:55:36:430 Started bandwidth estimation successfully
GPSVC(338.718) 10:55:36:430 GetDomainControllerConnectionInfo: Getting Ldap Handles.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: DOMAIN-NAME.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Server connection established.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Bound successfully.
GPSVC(338.718) 10:55:36:430 ProcessGPOs: Computer's domain is same as user's domain so using user's domain DC
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Getting ldap handle for host: DC-MLIB.DOMAIN-NAME in domain: <Unspecified>.
GPSVC(338.718) 10:55:36:430 GetLdapHandle: Server connection established.
GPSVC(338.718) 10:55:36:446 GetLdapHandle: Bound successfully.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\dskquota.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for C:\Windows\System32\iedkcs32.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ReadGPExtensions: Rsop entry point not found for gptext.dll.
GPSVC(338.718) 10:55:36:446 ProcessGPOs: No site name defined. Skipping site policy.
GPSVC(338.718) 10:55:36:446 GetGPOInfo: ********************************
GPSVC(338.718) 10:55:36:446 GetGPOInfo: Entering...
GPSVC(338.718) 10:55:36:446 SearchDSObject: Searching <OU=People,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 SearchDSObject: Found GPO(s): < >
GPSVC(338.718) 10:55:36:446 SearchDSObject: Searching <DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 SearchDSObject: Found GPO(s): <[LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 10:55:36:446 ProcessGPO: ==============================
GPSVC(338.718) 10:55:36:446 ProcessGPO: Deferring search for <LDAP://CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 EvaluateDeferredGPOs: Searching for GPOs in cn=policies,cn=system,DC=ad,DC=*****,DC=****
GPSVC(338.718) 10:55:36:446 ProcessGPO: ==============================
GPSVC(338.718) 10:55:36:446 ProcessGPO: Searching <CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 10:55:36:446 ProcessGPO: User has access to this GPO.
GPSVC(338.718) 10:55:36:446 ProcessGPO: GPO passes the filter check.
GPSVC(338.718) 10:55:36:446 ProcessGPO: Found functionality version of: 2
GPSVC(338.718) 10:55:36:446 ProcessGPO: Found file system path of: <\\DOMAIN-NAME\sysvol\DOMAIN-NAME\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}>
GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x3dc
GPSVC(418.430) 17:59:09:821 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:09:821 Target = Machine
GPSVC(418.430) 17:59:09:821 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(418.430) 17:59:09:821 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.30c) 17:59:09:821 Target = Machine, ChangeNumber 0
GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x448
GPSVC(418.430) 17:59:09:837 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.30c) 17:59:09:837 Target = Machine
GPSVC(418.430) 17:59:09:837 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(418.430) 17:59:09:837 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.6b8) 17:59:09:837 Target = Machine, ChangeNumber 0
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Entering with event 0x16c
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3b0.3c0) 17:59:11:085 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3b0.3c0) 17:59:11:288 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3b0.3c0) 17:59:11:288 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(338.30c) 17:59:12:380 Target = Machine
GPSVC(338.30c) 17:59:12:380 Target = Machine, ChangeNumber 0
GPSVC(338.30c) 17:59:13:051 Target = Machine
GPSVC(338.30c) 17:59:13:051 Target = Machine, ChangeNumber 0
GPSVC(338.30c) 17:59:13:285 Target = Machine
GPSVC(338.30c) 17:59:13:285 Target = Machine, ChangeNumber 0
GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xf04
GPSVC(338.5a0) 17:59:14:143 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:14:143 Target = Machine
GPSVC(338.5a0) 17:59:14:143 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(338.5a0) 17:59:14:143 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xb50
GPSVC(204.228) 17:59:59:897 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(338.6b8) 17:59:59:897 Target = Machine
GPSVC(204.228) 17:59:59:897 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(204.228) 17:59:59:897 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found common name of: <{31B2F340-016D-11D2-945F-00C04FB984F9}>
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found display name of: <Default Domain Policy>
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found user version of: GPC is 1, GPT is 1
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found flags of: 0
GPSVC(338.718) 18:01:58:941 ProcessGPO: Found extensions: [{3060E8D0-7020-11D2-842D-00C04FA372D4}{3060E8CE-7020-11D2-842D-00C04FA372D4}]
GPSVC(338.718) 18:01:58:941 ProcessGPO: ==============================
GPSVC(338.718) 18:01:58:941 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(338.718) 18:01:58:941 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(338.718) 18:01:58:941 GetGPOInfo: Leaving with 1
GPSVC(338.718) 18:01:58:941 GetGPOInfo: ********************************
GPSVC(338.718) 18:01:58:941 GetGPOInfo: ********************************
GPSVC(338.718) 18:01:58:941 GetGPOInfo: Entering...
GPSVC(338.718) 18:01:59:097 SearchDSObject: Searching <OU=FM-Security Video Servers,OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:097 SearchDSObject: Found GPO(s): <[LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:097 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={B957D759-2AF4-4592-95B8-5B7C62F9B340},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=FM-Servers,OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Found GPO(s): <[LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E8A9990E-57AD-4B7B-BAE4-C56E20FB6314},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={251254DD-27DC-419F-816D-C51CDB309D8F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=FM,OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Found GPO(s): <[LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;1][LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0][LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****;0]>
GPSVC(338.718) 18:01:59:113 SearchDSObject: The link to GPO LDAP://cn={1A42DA26-38F9-491C-940B-9D37895BE92A},cn=policies,cn=system,DC=ad,DC=*****,DC=**** is disabled. It will be skipped for processing.
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F3D0434D-3EFF-4713-908C-3D8AB8189FB9},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F03FA73B-A5B5-496B-94E5-5315D1D8F5F3},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={386C2C68-BB18-483B-AF36-92E76C1178D2},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={3D83F7A1-D4C2-4F8E-8808-CD5415D5A91E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={462C2912-2318-4F46-A082-8BCC07EBDA29},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={7690B141-A1C2-4381-BD63-1AF5C09B4456},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={62C29217-3E25-42FC-8469-78312109323E},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E795AC88-A750-45AF-870C-7EEDF00AA64A},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={B7C7410F-A3C0-4F12-8C3A-245C317EDFBA},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={CE1F85C1-DF2D-4E34-898B-2D6E3D0B55BE},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={D1B4C3BE-41CD-41B2-8A26-BE2EFD6953D0},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={E2673882-F33C-4879-AE75-583829D8BDA8},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={074DE127-4DBA-43F2-9C19-5953AD76CE9F},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={F4BAB9C5-0B6E-426B-93D3-1950A7002DC7},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 ProcessGPO: ==============================
GPSVC(338.718) 18:01:59:113 ProcessGPO: Deferring search for <LDAP://cn={4A2C73AF-509F-4434-AF58-1AB3888959B4},cn=policies,cn=system,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <OU=Department OUs,DC=ad,DC=*****,DC=****>
GPSVC(338.718) 18:01:59:113 SearchDSObject: No GPO(s) for this object.
GPSVC(338.718) 18:01:59:113 SearchDSObject: Searching <DC=ad,DC=*****,DC=****>> GPSVC(338.350) 17:57:09:669 UnLocked successfully
> GPSVC(338.27c) 10:55:29:426 Waiting for NETLOGON with timeout 6392
The numbers in parenthesis are PID.TID of gpsvc.exe. So we see a thread
change, and this usually indicates that a different logon process has
begun. Could you try to map this log entries to events in the group
policy event log?
But to be honest: No, I've never seen such a behavior in gpsvc.log :(
I'm almost sure that a service is responsible, but how to identify it -
I don't know. There's no auditing for system time changes, AFAIK.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-: -
External Hard Drive Failures after iMac internal drive replaced
I was one of those lucky ppl who had to have my internal 1TB Seagate HDD replaced due to the recall. It was replaced on Friday.
After the drive was replaced (with another Seagate, ***?), I cloned my previous system back to the new drive (restoring from Time Machine required me to re-download Lion, which required me to re-download to a newer version of Snow Leopard, and just, Oi, vey, I used my clone).
I then had to create another bootcamp partition, and after that, I restored my previous bootcamp from an image backup with Winclone.
The next morning, my Time Machine external backup drive (a Maxtor OneTouch) makes horrible fluttering and crunching noises and cannot be found via disk utility, certainly doesn't mount to the desktop. I figure it just coincidentally failed and attached a new drive (a different OneTouch) for backup.
While Time Machine is performing an initial backup to this new drive (will take 10 hrs), I try to move a few media files to another external media drive (LaCie 1TB). I receive a couple of error -36s on a few particular files, so I figure I should wait for the Time Machine to backup and then diagnose the media drive.
The next morning (after 10 hr backup is finished), I have a stop-sign error that a disk was unmounted improperly (the LaCie media drive). The drive cannot be seen in disk utility or on a completely different MBP running Snow Leopard. It's spinning up, but it can't be read.
Only thing I can think to do is reinstall 10.8.2 over top the cloned system, make sure that the recovery partition was recreated and working.
This can't be a coinicidence, right? At this point, I'm afraid to keep my external storage drives and clone attached to the iMac, but I'm afraid to not have TM drive attached. Anyone know where to start diagnosing the problem?
1. Could a new internal drive be the problem, hardware wise?
2. Could the lack of an initial recovery partition or the setting up of a bootcamp partition have these sorts of consequences?
3. Could the problem be from restoring a clone?Well, it is a LaCie-packaged adapter, some version of that model. The hub is on the mac mini inspired line of LaCie HDs (http://www.lacie.com/company/news/news.htm?id=10269). I've had it for 6 yrs, and the hub is still going. Other drives have been running from the hub without issue for all that time (and still are). There is no hissing, and the display light indicates the hub is getting power.
You think it's time for a new hub?
The internal switchout is just a coincidence?
(Basically, I'm not a hardware expert. Does anyone know if an internal drive or internal sensor/connection problem can cause externals to fail or blowout a controller? I'm waiting on a drive dock to arrive—I'll know more whether these are HD failures or chip failures after that. Both drives showed normal-seeming power use via their display lights.) -
Have to reinstall Flash after every reboot.
Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
Re: Have to reinstall Flash after every reboot.
created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Not all users are displayed for log on after a reboot or startup...
Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support -
Creative Cloud is Blank, nothing is displayed even after a reboot, what is the solution?
I did the following but it did not help,
Rename the opm.db file.
1.Close the Creative Cloud application if it's running.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
3.Rename the opm.db file to opm_old.db
4.Launch Creative Cloud
even after a reboot and installing an up date for Creative Cloud a blank screen is displayedHi urbanphotographer,
Please refer the thread: http://forums.adobe.com/message/6077848.
Regards,
Romit Sinha -
I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot
I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.
-
Mac Mini Server VPN requires restart of service after each reboot
Mac mini Server (Late 2012)
OS X 10.8.4
After a reboot, when viewing in Server.app, VPN service is turned on, however no connections can be made until the service is turned off then back on again.
VPN service log entry shows "Listening for connections..." but doesn't allow incoming VPN calls until the service is restarted.
Anyone else having similar issues or have suggested solutions?
Thanks much!
JimTry this
https://discussions.apple.com/message/22564125#22564125 -
Toggle Full Keyboard Access is Not Working after Shutdown/Reboot
Hi,
I'm yet another keyboard maniac and somehow as above subject was keep re-occured every time after enabled it, I've turn it on full keyboard access in system preferences > Keyboard > Keyboard Shortcuts. All seemed to be good before I shutdown or reboot my macbook pro. I could access all the dialogs and windows. After a reboot or shutdown, all the dialogs from any other apps can still be accessed via keyboard except one single window, the shutdown window (both from hitting apple->shutdown and control+eject.) I have to toggle control+f1 or control+f7 every freaking time in order to enabled keyboard access to shutdown/reboot. I've tried "defaults read -g AppleKeyboardUIMode" in terminal and it returned 3 which is "Full Keyboard Access ON and All controls" even after a fresh reboot:-
+++++++++
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
But when I'm using sudoer to check the result was set to "0" means disable:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
Password:
0
+++++++++
So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
+++++++++
Once done do reboot your Mac & check the result in Terminal should shows as below:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
3
=========
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
So it's fixed for my issue. If anyone have better suggestion or the proper method please share.
Thanks in advance.Quakershaker,
So what I do for the workaround/fix is by the set value to enabled it using root access level or sudoer:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults write NSGlobalDomain AppleKeyboardUIMode -int 3
+++++++++
Once done do reboot your Mac & check the result in Terminal should shows as below:-
+++++++++
Ben-MacOSX:~ Ben$ sudo defaults read -g AppleKeyboardUIMode
3
=========
Ben-MacOSX:~ Ben$ defaults read -g AppleKeyboardUIMode
3
+++++++++
So it's fixed for my issue. You may try this let me know the outcome.
Thanks -
PowerBook G4 hangs after install/reboot with Combo Mac OS X 10.5.8 update
I've got a Titanium PowerBook G4 1GHz. It had Mac OS X 10.5.4 installed.
Then I went to Software Update and it downloaded the Combo software 10.5.4 and after it rebooted, it is stuck at "Installing 2 items, Configuring installation."
You can see the progress bar pulsating but it's stuck and I dont hear any hard drive activity. I had to hard power down and got back in and did Software Update again and after it rebooted, same issue.
Whats up with that?Some general advice on updating Leopard:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US -
Hi All,
I had a working IPv6 tunnel with my Airport Express to tunnelbroker.net using the 7.6.1 firmware. After updating to 7.6.3, I have tried many things to get it to work and the only one that works is downgrading from 7.6.3 back to 7.6.1. After seeing this new technical note, it appears that the root of my issue is that I can not get the "IPv6 Delegated Prefix" field to stick - it is always empty after the reboot to apply the settings.
Any ideas?
Thanks,
CraigNI'm in the same boat with a 3rd Gen AEBS. Only thing I haven't tried is a complete reset and reconfiguration from nothing, which I may wind up doing this afternoon just to rule it out. The best irony of all of this is that tunnelbroker.net is under my responsibility, and I can't validate the new settings paradigm. At least getting back to 7.6.1 is easy enough and everything works fine there.
IPv6 Delegated prefix doesn't get saved when using the format from their example, then a 6to4 address shows up as the local address on the main Internet page, and no RAs are received once the AEBS comes back from a reload. Something's a little off on this release. -
SQL connection errors when stress testing mobile service: SQL failure after 3 attempts
I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric -
How Can i retain the Shared Variable Values after PC rebooting
Hi all,
I am facing a paculiar problem with Shared Variables. I have an application in which shared variables are used for data communication.
One of the application requirement is to retain the variable values eventhough PC is rebooted or started after crashing.
As per the my understanding, the variable values will retain eventhough the PC is rebooted. But here i can observe a paculiar problem like some library variables are retaing the values while some others not. I enabled logging for all the variables.
I tried many ways. like logging enabled, logging disabled, changing variable names, changing process names etc... But i am not getting a consistent behaviour.
I hope some you can help me in solving this issue.. "How Can i retain the Shared Variable Values after PC rebooting"
Thanks and Regards,
MirHi Blackperl,
Thanks for the post and I hope your well.
What do you mean by not getting consistent behaviour.. this will all depend on excatly when the crash happens i.e. before the write or after.
Surely a better method would be to log the data to a file during the reboot...
I beleived the value read back
will be the default value for the shared variable's data type.
The LabVIEW DSC 8.0 module adds more functionality to the shared variable, including initial values and alarms.
If you enable an initial value on a shared variable, when the variable
engine comes back on-line it will default to this value. Setting a bad
status alarm for the shared variable is also a good way of handling
this type of event. Additionally, if you are using a LabVIEW Real-Time
target such as Compact RIO or Compact FieldPoint, it is appropriate to
consider hosting the shared variable engine on the real-time target.
These devices have watch-dog capabilities and are typically the
hardware controlling the critical pieces of an application. Most
Windows or PC-based targets do not have these fail-safes.
I guess, if you could explain to me again that would be great. From my point of view, if I have a cRIO and a Windows PC. If the windows PC crashes, the cRIO will still update its shared variables. Then once the PC has started up its own shared variable engine, and the bindings are loaded, it will once again continue to update its copies of the variables.
Please let me know what you think,
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Maybe you are looking for
-
Mi Ipod Touch 4th gen dosn't connect to WiFi
i restart my ipod i reset the iPod i reset the network settings in gral settings ,even spoke with apple support especialist, my iPod doesn't conect i tried and says can't scan networks, in the settings screen under the Airplane mode in the WiFi lin
-
Is there a place where I can get a Power Book G4 serviced?
I am looking for a place to get service on my Power Book G4, any suggestions?
-
Goal: To read Material or Material & Batch or Material & Serial nos from Material DSO (ZMM_O01) and get the plant for a certain movement type. Populate plant into another DSO (ZQM_O02). I have done declaration part in start routine as follows: *****
-
I have had a problem that has been happening on a continuing basis. I have rebuilt my iPhoto library so many times at this point I'm getting scared that permenant damage may happen to my photos. I find that on occation something happens with iPhoto
-
How can I transport a select-option structure into a RFC function
hey, I want to import 10 select-option fields into RFC function. the structure likes follows: DATA: BEGIN OF T_EBELN, SIGN TYPE C, OPTION(2) TYPE C, LOW LIKE EKKO-EBELN, HIGH LIKE EKKO-EBELN,