LEAP Problems (still)

So far, I have tried all of the "fixes" that have been posted here to get LEAP to work with my MBP. Updating to 10.4.6 didn't solve the problem exactly... Before the update I couldn't connect to the network at all.... Now, I can connect, but the card assigns itself an automatic private address in the 169.x.x.x range, which, obviously does about as much good as not being able to connect at all. I have tried using 802.11x instead of LEAP, and I get the same results. I have tried connecting through Internet Connect and get the same results. Both Internet Connect and the Airport tell me that I have authenticated and am connected to the network, but I don't get an IP address... I tried using the .kext file from the mac mini, and it gives me the same results.
Does anybody have any other ideas? Has anybody else had this problem?
I've got 10.4.6 (8|1119) and Airport Firmware 0.1.17
MacBook Pro 2.0ghz Mac OS X (10.4.6)

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

i mean that i phone take time to open apps ,contact ,etc why? i close all apps and the problem still?

Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

After upgrading to yosemite on my macbook pro the spinning wheel does not go away.i have reset the SMC and PRAM but the problem still persists

After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help

Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

Does the regular Firefox 8 release version work or does the version crash as well?
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Macbook pro 13" late 2011 stuck up at apple logo and spinning wheel, changed HDD problem still exists

i have a macbook pro 13' late 2011 unit and its not starting up, found out that the HDD was defective, but when i changed the HDD the problem still exists, what may be the problem?
thanks

Have you tried booting into the Recovery HD and running Disk Utility and checking to see if the HD needs repairs?
Restart holding Command + r and at the recovery screen select Disk Utility. Then select Macintosh HD and click on 'repair disk'. If anything gets altered click on repair disk again until you get a clean pass. Restart as normal from the Apple menu. More info here about the Recovery HD:
http://support.apple.com/kb/HT4718

My firefox crashed when upload file on our web based application. This happen on two PC, even during firefox safe mode the problem still exist. But the problem

Dear All,
My firefox (version 23 on win 7) crashed when upload file on our internal web based application. This happen on two PC, even in firefox safe mode the problem still exist. So, my first conclusion the problem nothing to do with extension. here the crash ID https://crash-stats.mozilla.com/report/index/81220865-36c0-4e10-a484-6d27e2131023 and https://crash-stats.mozilla.com/report/index/86d2b779-9730-4d2c-b276-a86d42131023. I wonder if this happen because jquery modul in our web based application. But when I tried on my laptop, the problem dissapear. I tried to replicate same situation on different server, I mean I put the exact same application source to other server, never meet the same problem. Thus, I suspect may be it related to antivirus that installed in our network which is kaspersky. I am googling, never meet the clue.
If you meet the same problem, please help me.
I am so sorry for my poor english.
Him Him

The crashes are a problem with the winhadnt.dll file (OCular Agent from TEC Solutions Limited) as you can see in the crash reports.
*http://www.freefixer.com/library/file/winhadnt.dll-52397/

The camera on my ipad cannot be launched,the shutter appears closed and the button for taking a picture is not there. When tryying to use intsgram the message camera cannot be launched appears .tried to restart but problem still there

My camera is not working .shutter appears closed.tried to restart ipad but problem still there.no problem with photo booth problem with istangram

Try closing the Camera app via the taskbar and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
And by restart do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot). If not, and if closing the app doesn't fix it, then you could try that.

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

LEAP Problems (still)

Similar Messages

Maybe you are looking for