Leap second time change for 2009

A 'leap second' will be added onto the final minute of 2008, does anybody know if this impacts Oracle ?

Oracle RDBMS needs no patches and has no problem with the leap second changes on OS level
Please see the oracle Doc Id # 730795.1

Similar Messages

  • Time change for daylight savings and Alarms not working correctly

    we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
    Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

    Read here:
    http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

  • SAP Note 1391072 - 1099 Legal Changes for 2009

    Hi,
    Can anyone please suggest how can I implement the SAP Note 1391072 - 1099 Legal Changes for 2009.
    This note is talking about import of some transport in system but I am not sure what need to be done.
    Please suggest how can I implement it.
    Thanks,
    Shilpa

    Hi All,
    This note is basically talking about import of transport in system and if you visit to Service.sap.com then you will get a zip file of transport. This zip file need to be imported in system...
    Thanks
    Shilp

  • My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

    My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion...  Help!!!
    Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?   

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Stopping invoice Parking for Second time Parking for a frame work PO...

    Hi SAP Guru's..
    there is a Requirement from Client site that ..
    for a Frame work PO which comes with a Invoice plan ..
    we should be able to Stop Second time invoicing Maintained in Invoice Plan...
    How to Go for this ...
    Any workable suggestion would be Rewarded with Points ...
    Thanks and warm Regards..
    Adarsh Srivastava..

    You can control the changing of PO in the enhancement which name you can search here. There are three kinds of enhancement: check, change and save. You need select the kind of 'change'.

  • JDK DST Time Change for 2007

    I just got an e-mail from Sun about the DST issue for 2007.
    Is Adobe going to come up with a fix for this or should we download
    the JDK directly from Sun? We are currently running JDK 1.4.2_04.
    Some sort of communication about this issue would be appreciated.
    U.S. Daylight Saving Time Changes in 2007
    The United States has planned a change to its DST observance
    beginning in 2007. The Energy Policy Act of 2005 mandates that DST
    will start on the second Sunday in March and end on the first
    Sunday in November. In 2007, the start and stop dates will be March
    11 and November 4, respectively. These dates are different from
    previous DST start and stop dates. In 2006, the dates were the
    first Sunday in April (April 2, 2006) and the last Sunday in
    October (October 29, 2006).
    If you are concerned about application failures that may
    result from these DST changes, you should update your Java Runtime
    Environment. The following Java platform versions have correct time
    rules to handle the DST changes that will affect U.S. time zones in
    2007. You can download any of the following Java platform versions
    to resolve this DST issue:
    JDK 6 Project (beta)
    J2SE 5.0 Update 6 or later
    J2SE 1.4.2_11 or later

    Ok, I have figured out what the issue is here. I'm posting
    this in the hopes
    that Adobe will modify their document, "How to upgrade the
    JVM that ships with
    ColdFusion" at
    http://www.adobe.com/go/2d547983.
    There are several steps that
    are omited or vague, so here is some additional information
    that will help you
    in the upgrade process.
    JVM 1.5.x is NOT supported for ColdFusion. The link
    specified for the upgrade
    process points to the Java SE page which currently displays
    1.5.x as the
    current version. Instead go directly to the 1.4.2x page at
    http://java.sun.com/j2se/1.4.2/download.html
    to get the correct version of the
    JVM.
    It should also be noted that the default installation for
    the JVM points to
    C:\Program Files\Java\JDK<version>, this default
    directory must be changed
    because the java.config file does NOT allow for white space
    in the java.home
    argument. When installing the JVM you should choose the
    ?Custom? install and
    install to C:\Java or a directory structure that does not
    contain spaces. It
    may be helpful to rename the JRE directory under Jrun4 and
    install to that
    directory directly if you don?t want the java files outside
    of the Jrun
    directory. This is important because if there is white space
    in the directory
    structure, ColdFusion will not start up and return a ?Service
    fails to start
    with Service-Specific Error 2? message when starting the
    service.
    Once you have installed the JVM it is necessary to create a
    directory in the
    JVM folder called ?Server?. There is already a directory in
    the folder called
    ?Client?. Once you create the Server directory, copy the
    contents of the Client
    directory into the new directory called Server; this is
    completely omitted from
    the document and is important to the process for upgrading
    the JVM.
    Using the above information combined with the document
    provided by Adobe, I
    was able to install the JVM 1.4.2_11 and ColdFusion started
    up using it.
    Hopefully these suggestions will help others in the future
    when they need to
    upgrade the JVM.
    Thanks!

  • Daylight Saving Time Changes for 2007

    Hello Friends
    Sun's J2SE 1.4.2_11 has taekn care of the new Daylight Saving Time changes in accordance with The Energy Policy Act of 2005. Does anyone know if bea has incorporated same changes to their Jrockit, if so then starting which version.
    http://java.sun.com/developer/technicalArticles/Intl/USDST/
    Thanks for the answers in advance.
    Regards
    Rajeev Bhogal

    Hello All
    We currently compile and run our application with Jrockit 1.4.2_04 (build 1.4.2_04-b05), if we change to minor version 11 for 1.4.2 should we recompile the application. I would think that DST related binaries would only be called at run time not compile time, however I am far from being a compiler expert. Can any learned friend shed some light.
    Henrik what do you think.
    Regards and Thanks
    Rajeev Bhogal

  • DST time change for global companies

    We are curious to hear how other companies are handling the DST time changes in spring and fall especially if they are global and operating in multiple time zones.
    Do you set servers to UTC/GMT?
    And set SAP systems to UTC?
    And let users set their local time zone?
    Would that mean we don't have to worry about the fall and spring time change any more because UTC doesn't change? (That would be nice!)
    TIA,
    Margie

    Hi Volker,
    these "right setting" makes me unconfident.
    note 7417 tells me that that better shut down the system because the majority of the applications are not certified for a continued operation
    note 102088 tells me how to minimize the downtime to one hour... these is the procedure we were using the last years
    note 950114 tells me how to avoid the double hour by using zdate/DSTswitch_contloctime (=on you need not to shut down the system)
    note 391658 tells me "If you are converting from summer time to winter time, shut down all SAP instances before the scheduled conversion (for example, at 01:30) and wait at least an hour before you restart them."
    Your experience to let the systems run was quite good, but it is dissapoints me that SAP does not give a distinct statement about the DST. As mentioned befor, it is not practicable to shut down the SAP system in a global environment.
    cu, Christian

  • Unwanted automatic time change for no reason

    I've got a 6021 that changes time by one or two hours for no apparent reason whether it's in automatic time adjust or not.
    The firmware version is 4.10 092005; has it been improved since then?
    CK

    Yes, current version is 04.90. A firmware upgrade should sort out the problem for you
    Best Regards
    Dave

  • Daylight Savings Time Changes for 2007

    Could Oracle have made it any more confusing to update database server software for the DST changes starting in March? One document I read points to at least a dozen other documents, some of which are actually written in English.
    Has anyone been able to simplify this procedure or are you all just hoping the DST changes don't affect you?

    Are you not able to find the correct patch for your database platform?
    You can always contact Oracle Support to clarify any issues you may have that relate to your platform.

  • You block my hotmail account for the second time

     you don't have the right to block my hotmail account for the second time and for no reason.
    you have the worst customer service system ever, it's not respectable.
    I think my new E-mail will not be with you.

    Lots of Mikes in this thread!  
    MichaelRizk: I dont speak or write Arabic so hopefully you can understand an English response. 
    This is the TechNet Website Feedback forum, and here we know things about the TechNet Website and the TechNet Subscription.  Microsoft has a lot of products and a lot of separate teams that work on those products.  
    The link Mike provided for you is exactly where you need to go to get help, and where you have the best chance to get an explanation for whatever happened to your Hotmail account.  Here we don't know anything about Hotmail.
    Good luck!
    Thanks,
    Mike
    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is a standard response I’ve written up in advance to help many people (thousands, really.)
    who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
    of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks, Mike
    MSDN and TechNet Subscriptions Support

  • For the second time my wi fi is grey and Bluetooth won't turn on was already given a new one but leaving for vacation tonight and now will be leaving with no phone working like it should be!  What am I to do?

    Can't turn on wi fi nor Bluetooth for second time leaving for vacation tonight but without a proper phone happened once before and they replaced it but there has to be someway to fix it without going to apple!  My plane leaves in four hours

        Hey Webbrowser.  I am sorry for the delayed response and that bluetooth and WiFi was giving your device some troubles. I hope that you had a nice vacation that you had a safe return.
    Are you still having issues with WiFi and Bluetooth?
    If so, please try resetting the network settings, http://vz.to/uLOEAI.
    After you update the network settings, please update us with results and let us know if the WiFi and Bluetooth are now working.
    NickB_VZW
    VZWSupport
    Follow us on Twitter @VZWSupport

  • Alarm setting not working since time change.

    I use the alarm setting regularly but after the time change for daylight savings time it is an hour off. Does anyone know how to correct this?

    Do a reset. Go to Settings>General>Reset. Reset all Settings. You won't lose any files, just some preferences.

  • 2009 MBP can't see internal hard drive - for the second time!

    Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
    The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
    Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
    My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
    Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
    Thanks for any feedback!

    Hi
    I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
    broadband.vodafone.ie/download/files/storage_mac.pdf
    Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
    I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
    Cheers
    Topes

  • Problem while refreshing the data for the second time using excel services in sharepoint 2013...

    Hi,
    I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
    below find the flow of refresh
    First Refresh
    On Click of refresh open the workbook with excel services and return the session id.
    Using that session I am invoking RefrehAsync method of excel services
    After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
    After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
    Now I am able to see the data
    Second Refresh
    After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
    I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
    This time my formulas are not getting calculated because of that I am not able to see the data.
    Could you please let me know that am I missing anything here?
    Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
    If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

    I am able to see the data for the second refresh  if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
    Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
    Please help me asap.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

Maybe you are looking for