Leapord Upgrade - Apache 403 Forbidden

hey, I've seen this issue posted a bunch of times, and it seems that there's a single solutions out there that works for everyone. But me. I've created a screen cast video to show what I've done (follow the recommended solution) to see if anyone can see what I'm doing wrong.
Made the update from Tiger to Leopard. Now I get a 403 error message when I try to go to my local host. Although I don't show it in the screen cast, I've restarted apache, my "web sharing" and even my computer a bunch of times and it still hasn't helped.
http://screencast.com/t/3JrFV27iq
Thanks,
Justin

I'm not entirely sure what you mean or what you recommend that I do.
I'm serving my files out of the "/Library/WebServer/Documents/" directory directly, not my local /username/sites/" directory. In my user file though, I referencing the latter, so my user config file to override the permissions on the "/Library/WebServer/Documents/" directory?
I think I tried that, but had no luck. I'll try again.
I don't have a index file in the root directory, so it's possible that directy access listing is being denied, but I get the same "Forbidden" message when I go directly to any file also.

Similar Messages

Apache: 403 Forbidden error when trying to change DocumentRoot

I am developing several websites, but I prefer to store them in a directory at the root of my hard drive (let's call it /Websites) rather than in ~/sites or /Library/WebServer/Documents. I want to be able to preview php files locally for testing purposes, but am having trouble figuring out how to give Apache access to them without temporarily moving them into ~/Sites and back every time. The Apache documentation suggests two ways which I may point to /Websites: 1) by changing DocumentRoot in httpd.conf, or 2) through symbolic links.
The problem is, either method results in a 403 forbidden error. I assured that permissions were set the same way as the files Apache can access (755 for directories, 664 for files) and tried changing ownership to root, admin... but it didn't work and I'd prefer not to have all of my site files owned by root as it makes editing difficult.
What am I doing wrong? Any suggestions?
I also tried adding the following to httpd.conf but it had no discernible effect.
<Directory "/Websites">
Options +Indexes FollowSymLinks +ExecCGI
AllowOverride AuthConfig FileInfo
Order allow,deny
Allow from all
</Directory>
Assuming it did work, would changing the "Allow from..." line to "Allow from 127.0.0.1" or "Allow from localhost" along with "deny from all" be the proper way to let me preview on the local machine without serving my test pages to the entire internet?

Did you change this to reflect new DocRoot?
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">

I'm trying to upgrade to Mountain Lion and I get an error message that says "server error during download; 403 forbidden. What does this mean, what can I do? I had no problem downloading Lion.

Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.

403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such?

Web Service security with Apache Axis. 403 forbidden error

Hello.
I have to invoke a Web Service method via https. To achieve that, I have correctly added the server certificate to my truststore.
When I invoke the method, I obtain this error:
AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (403)Forbidden
This is because the server requests me for a client certificate.
I have the certificate, but I don't know how to use it in the java client.
Does anybody know how to do that? Any kind of help will be very useful.
Thank you very much in advance.
NOTE: If I write the url of the web service in a web browser, the server requests me for a client cert. When I chose the appropiate certficate, the web browser shows me this message from the web service: "Hello, this is a Web Service"

Finally my problem has been solved.
I added the necesary properties to the system and everything went well.
This is the code:
String trustStore = System.getProperty("java.home") + "/lib/security/cacerts".replace('/', File.separatorChar);
String keyStore = System.getProperty("java.home") + "/lib/security/keystorePKCS12".replace('/', File.separatorChar);
String tspasswd = "myTrustStorePassword";
String kspasswd = "myKeyStorePassword";
System.setProperty("javax.net.ssl.trustStore", trustStore);
System.setProperty("javax.net.ssl.trustStorePassword", tspasswd );
System.setProperty("javax.net.ssl.keyStore", keyStore);
System.setProperty("javax.net.ssl.keyStoreType", "PKCS12");
System.setProperty("javax.net.ssl.keyStorePassword", kspasswd );It's necesary to say that my keystore is PKCS12 type, and it stores only one pkcs certificate.
Note that is also posible to set these system properties in the Tomcat start script.

403 Forbidden on Apache for a web page in my own encrypted Sites folder

Greetings,
I'm developing a php web site, putting files in my account's "Sites" folder.
My whole account is encrypted (not by File Vault, but by moving it in an encrypted .dmg by ditto and niutil, instead) and I'd like the web site itself to be, too: for now I want it my eyes only. Everything I use (iApps, etc.) works fine, so I think I adjusted my encrypted home right.
But, I can't view my own web pages in Safari: when I try any location such http://localhost/~myusername[/myfile] I get a 403 Forbidden error.
File permissions seem right and Personal Web Sharing is on. Moreover, if I create a brand new user and move it (via ditto and niutil) in the same encrypted .dmg, it suffers the same fate.
Any other non-encrypted account's web page, e.g. http://localhost/~otherusername is reachable from my encrypted account.
I wonder if all that's about Apache configuration, which I'm not skilled enough to fix.
Thanks to anyone caring to help.

Hi Begli, and a warm welcome to the forums!
See if any of this helps...
http://www.informit.com/library/content.aspx?b=MacOS_XUnleashed&seqNum=211

HT201364 Am trying to upgrade to mavericks from Lion 10.7 but whenever i press upgrade, i told that The server gave an error during download: 403 Forbidden.

Am trying to upgrade to mavericks from Lion 10.7 but whenever i press upgrade, am told that ``The server gave an error during download: 403 Forbidden``.
Below are my hardware specs. Does anyone have an answer to this?
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro4,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.93 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          8 MB
Memory:          9 GB
Processor Interconnect Speed:          6.4 GT/s

http://www.apple.com/support/mac/app-store/contact/

When I try to got to a website I get a message that says 403-forbidden error

this is what I get when I try to go to a website...
403 - Forbidden Error
You are not allowed to access this address.
If the error persists, please contact the website webmaster.
If you are the webmaster of this site please log in to Cpanel and check the Error Logs. You will find the exact reason for this error there.
Common reasons for this error are:
* Incorrect file/directory permissions: Below 644.
In order files to be read by the webserver, their permissions have to be equal or above 644. You can update file permissions with a FTP client or through cPanel's File Manager.
* Restrictive Apache directives inside .htaccess file.
There are two Apache directives which can cause this error - 'Deny from' and 'Options -Indexes'.
how can I fix this?

Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred

403 Forbidden Error on directory but not on index page.

I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
httpd.conf
condensed:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin [email protected]
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/extra/owncloud.conf
With Comments:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
## vhosts
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Include conf/extra/owncloud.conf
##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
$ ls -al /srv/http/
total 16876
drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
-rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
-rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
-rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
-rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
# groups http
wheel http
Last edited by johan1391 (2015-03-07 04:11:12)

/var/log/httpd/owncloud-error.log
192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
$ ls -al /usr/share/webapps/
drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
Last edited by johan1391 (2015-03-07 19:03:19)

Getting "Error 403--Forbidden" while accessing ADF bookmarked URL

Hi,
Here am trying to work with an ADF application to suport bookmarking.
Following are the steps I did to create a sample application.
Created a bounded task-flow (user-details.xml), which has the "Method call" as default activity along with an another view activity(userData.jsff page).
This task-flow takes an input parameter "Id" to display user details. In the method call activity user data will be initialized using the given input parameter and then the data will be displayed using userData.jsff page.
Created a view activity (details.jspx page) in adfc-config.xml file.
Marked the "details.jspx" file as bookmark-able by changing "Bookmark property to true" and given a Bookmark URL Parameter "Name is Id and Value is #{pageFlowScope.user_id}".
Dropped the bounded task-flow user-details.xml as a region into the details.jspx file.
Now the user_id which is coming as URL Parameter will be passed to user-details.xml task-flows input parameter value.
Created users.jspx page which lists all the users as home page. In the users.jspx page we'll have a link to user details page with a parameter Id.
By running the application will get users page. When I click on the user details link in the users page, the app showing user details page as expected.
Now I bookmarked the user details page. If I open the bookmarked page in the same tab, it is working fine. But when I open this bookmark in a new tab getting the "Error 403--Forbidden" response.
Bookmarked URL: localhost:7101/BookmarkTestApp-ViewController-context-root/faces/user_details?id=123&_afrWindowMode=0&_afrLoop=4884151149818&_adf.ctrl-state=35yghmx4f_18
When I click the above bookmark in another tab the url is processing for few seconds ( 2 to 3 seconds) and converts to localhost:7101/BookmarkTestApp-ViewController-context-root/ and giving 403 response. At this time it is not touching my beans at all (verified this by running the server in debug mode).
Web.xml looks like:
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>true</param-value>
</context-param>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<listener>
    <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
</listener>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
</servlet-mapping>
<mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<jsp-config>
    <jsp-property-group>
      <url-pattern>*.jsff</url-pattern>
      <is-xml>true</is-xml>
    </jsp-property-group>
</jsp-config>
</web-app>
Am I missing any thing here.
Thanks in advance.
-Gopal.

https://blogs.oracle.com/DavidGiammona/entry/why_do_i_get_this_error_403_--

403 forbidden error received at Trade Partner side while sending data to XI

Hi XI Experts,
We have a B2B scenario from TP1 to another TP2 via XI in our production system. The interface is working fine and messages are flowing successfully. However, the Trade Partner HUB has decided to implement a new eCommerce Business Platform at their end. That's why they have provided AS2 ID of sender and Receiver to us to make the changes in Quality environment. I have done the same in our Quality system.
Flow: We are able to send the data successfully to the AS2 ID provided by Hubgroup. Where as we are not able to receive any data from HUB.
Last Friday, Hubgroup has received the error while sending data to XI. And in our Sender AS2 channel, we also received the following error.
a) HUB Side error:
                          Here is a copy of the MDN Message send to HUB:
                         The message you sent on "Thu, 14 Oct 2010 07:14:51 GMT" from "XXXXXXXX" to
                        "XXXXXXXXX" with subject "Integrator Message" has been received on 14 Oct
                         2010 19:14:52 GMT, but cannot be processed because message authentication
                         failed.
b) XI AS2 channel error:
                         Error type: PANIC >> Error date: 10/14/10 11:48 AM >> Description: Initiate
                         Error:com.seeburger.util.configuration.ConfigurationException: Failed to lookup report channel for failed inbound
                         message. Reason : com.seeburger.xi.config.ConfigException: No matching inbound binding (report) found for
                         FromParty: ToParty: subject:Integrator Message [10/14/10 11:48 AM]
                  I have done the following things: 1) Cache refreshed 2) Recreated the 1st part from HUB to XI. 3) Checked the Agreements and Receiver Determination and also the AS2 ID's 4) Also checked the URL in communication channel. I have created the scenario with out any mapping. I want to receive the data from HUBGROUP with out any changes. For that, I will be using a dummy interface and dummy namespace in configuration.
When we test last night, HUB side they have received 403 forbidden error message and we didn;t receive any message to XI.
Note: XI3.0 version we are using currently. We are upgrading to PI 7.11 in the next month.
Please help me on this.
Thanks & Regards,
Abdullah Shaik.
Edited by: Abdullah Shaik on Oct 20, 2010 9:06 AM

Hi Abdullah ,
here are a few things that you can check:
1) Message authentication failed
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
2) Partner received HTTP Error 403 u201Cforbiddenu201D.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
regards,
Daniel

What is a 403 Forbidden error message which I get on firefox, safari and chrome. I don't know if it is the website or something with my mac though everything else works fine.

When trying to log in to crossstitch.com I get this message:
You don't have permission to access /index.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache mod_fcgid/2.3.6 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.crossstitchforum.com Port 80
I googled the error message and don't really understand what it means.
I don't know if it is the website or something else. I am not sure where to check and I don't know how to get in touch with the webmaster. If anyone can help I would appreciate it.

If it is a Firefox add-on, you may be able to disable or remove it here:
new Firefox button > Add-ons > Extensions
or
classic Tools menu > Add-ons > Extensions

WebServices over SSL - 403 Forbidden error

Hello all,
I am able to successfully communicate with a SSL enabled .NET webservice using apache-axis in my java code. however, when i
try the same with weblogic based libs [%bea_home%\server\lib\webserviceclient+ssl.jar] - assume the other jars are ok, i get
the following exception stack trace:
Disabling strict checking on adapter weblogic.webservice.client.WLSSLAdapter@55a338
Set TrustManager to weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@fdb00d
Set HostnameVerifier to weblogic.webservice.client.WLSSLAdapter$NullVerifier@131303f
Disabling strict checking on adapter weblogic.webservice.client.WLSSLAdapter@6b9c84
Set TrustManager to weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@e1eea8
Set HostnameVerifier to weblogic.webservice.client.WLSSLAdapter$NullVerifier@131303f
Got new socketfactory javax.net.ssl.impl.SSLSocketFactoryImpl@18f51f
Connecting to:www.abc.com port:443
socket:Socket[addr=www.abc.com/12.345.67.89,port=443,localport=4802]com.certicom.tls.interfaceimpl.TLSConnectionImpl@e35bb7
Warning: cert chain incomplete
Warning: cert chain untrusted
Warning: subject (www.abc.com, OU=Terms of use at www.verisign.com/rpa (c)00, OU=ABC 1, O=ABC inc, L=abc, ST=abc, C=abc) does
not match server name (null)
<Jul 27, 2004 10:52:49 AM GMT+05:30> <Info> <WebService> <BEA-220025> <Handler weblogic.webservice.core.handler.ClientHandler
threw an exception from its handleResponse method. The exception was:
javax.xml.rpc.JAXRPCException: weblogic.webservice.util.AccessException: The server at
https://www.abc.com/abcdef/ABCWebService.asmx?WSDL returned a 403 error code (Forbidden). Please ensure that your URL is
correct and that the correct protocol is in use..>
A RemoteException has been thrown
java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: The server at
https://www.abc.com/abcdef/ABCWebService.asmx?WSDL returned a 403 error code (Forbidden). Please ensure that your URL is
correct and that the correct protocol is in use.
Detail:
<detail>
<bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers/wls70/webservice/fault/1.0.0">
</bea_fault:stacktrace>weblogic.webservice.util.AccessException: The server at
https://www.abc.com/abcdef/ABCWebService.asmx?WSDL returned a 403 error code (Forbidden). Please ensure that your URL is
correct and that the correct protocol is in use.
     at weblogic.webservice.binding.soap.HttpClientBinding.handleErrorResponse(HttpClientBinding.java:371)
     at weblogic.webservice.binding.soap.HttpClientBinding.receive(HttpClientBinding.java:233)
     at weblogic.webservice.core.handler.ClientHandler.handleResponse(ClientHandler.java:63)
     at weblogic.webservice.core.HandlerChainImpl.handleResponse(HandlerChainImpl.java:230)
     at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:229)
     at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
     at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:270)
     at com.webservice.abc.client.proxy.ABCWebserviceSoap_Stub.getABC(ABCWebserviceSoap_Stub.java:113)
     at com.webservice.abc.client.ABC_WS_Client.main(ABC_WS_Client.java:158)
</detail>; nested exception is:
     javax.xml.rpc.soap.SOAPFaultException: The server at https://www.abc.com/abcdef/ABCWebService.asmx?WSDL returned a
403 error code (Forbidden). Please ensure that your URL is correct and that the correct protocol is in use.
     at com.webservice.abc.client.proxy.ABCWebserviceSoap_Stub.getABC(ABCWebserviceSoap_Stub.java:118)
     at com.webservice.abc.client.ABC_WS_Client.main(ABC_WS_Client.java:158)
Caused by: javax.xml.rpc.soap.SOAPFaultException: The server at https://www.abc.com/abcdef/ABCWebService.asmx?WSDL returned a
403 error code (Forbidden). Please ensure that your URL is correct and that the correct protocol is in use.
     at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:285)
     at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)END
     at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:270)
     at com.webservice.abc.client.proxy.ABCWebserviceSoap_Stub.getABC(ABCWebserviceSoap_Stub.java:113)
     ... 1 more

Hi All,
I am new to webservice programming. I am trying to consume webservice over https. I am using weblogic 8.1 sp2. I am getting http 403 forbidden error. from the log it seems that ssl handshaking is completing.
Algorithm: [MD2withRSA]
Signature:
0000: BB 4C 12 2B CF 2C 26 00 4F 14 13 DD A6 FB FC 0A .L.+.,&.O.......
0010: 11 84 8C F3 28 1C 67 92 2F 7C B6 C5 FA DF F0 E8 ....(.g./.......
0020: 95 BC 1D 8F 6C 2C A8 51 CC 73 D8 A4 C0 53 F0 4E ....l,.Q.s...S.N
0030: D6 26 C0 76 01 57 81 92 5E 21 F1 D1 B1 FF E7 D0 .&.v.W..^!......
0040: 21 58 CD 69 17 E3 44 1C 9C 19 44 39 89 5C DC 9C !X.i..D...D9.\..
0050: 00 0F 56 8D 02 99 ED A2 90 45 4C E4 BB 10 A4 3D ..V......EL....=
0060: F0 32 03 0E F1 CE F8 E8 C9 51 8C E6 62 9F E6 9F .2.......Q..b...
0070: C0 7D B7 72 9C C9 36 3A 6B 9F 4E A8 FF 64 0D 64 ...r..6:k.N..d.d
]>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <SSLTrustValidator r
eturns: 0>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <Trust status (0): N
ONE>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: S
erverHelloDone>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <write HANDSHAKE off
set = 0 length = 134>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <write CHANGE_CIPHER
_SPEC offset = 0 length = 1>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <write HANDSHAKE off
set = 0 length = 16>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <isMuxerActivated: f
alse>
<Jan 30, 2006 11:39:29 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 readRecord(
)>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 SSL3/TLS MA
C>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 received CH
ANGE_CIPHER_SPEC>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <isMuxerActivated: f
alse>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 readRecord(
)>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 SSL3/TLS MA
C>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 received HA
NDSHAKE>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <HANDSHAKEMESSAGE: F
inished>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <write APPLICATION_D
ATA offset = 0 length = 304>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <write APPLICATION_D
ATA offset = 0 length = 558>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 read( offse
t: 0 length: 2048 )>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <isMuxerActivated: f
alse>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <SSLFilter.isActivat
ed: false>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 readRecord(
)>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 SSL3/TLS MA
C>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 received AP
PLICATION_DATA>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 APPDATA dat
abufferLen 0>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 APPDATA con
tentLength 1907>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 read databu
fferLen 1907>
<Jan 30, 2006 11:39:30 AM GMT+05:30> <Debug> <TLS> <000000> <5564590 read A retu
rns 1907>
javax.xml.soap.SOAPException: Failed to send message: weblogic.webservice.util.A
ccessException: The server at https://www.3pv.net/3PVWebServices/3PVWebServices.
asmx?wsdl returned a 403 error code (Forbidden). Please ensure that your URL is
correct and that the correct protocol is in use.
at weblogic.webservice.core.soap.SOAPConnectionImpl.call(SOAPConnectionI
mpl.java:61)
at com.ceon.pencor.threepv.ThreePVUtils.sendOrderRequest(ThreePVUtils.ja
va:350)
at com.ceon.pencor.threepv.ThreePVAdapterImpl.sendThreePVRequest(ThreePV
AdapterImpl.java:119)
at com.ceon.pencor.threepv.ThreePVAdapterImpl_ydsnbq_EOImpl.sendThreePVR
equest(ThreePVAdapterImpl_ydsnbq_EOImpl.java:46)
at com.ceon.pencor.threepv.ThreePVAdapterImpl_ydsnbq_EOImpl_WLSkel.invok
e(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
ef.java:108)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:353)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:415)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: weblogic.webservice.util.AccessException: The server at https://www.3
pv.net/3PVWebServices/3PVWebServices.asmx?wsdl returned a 403 error code (Forbid
den). Please ensure that your URL is correct and that the correct protocol is i
n use.
at weblogic.webservice.binding.http11.Http11ClientBinding.handleErrorRes
ponse(Http11ClientBinding.java:136)
at weblogic.webservice.binding.http11.Http11ClientBinding.receive(Http11
ClientBinding.java:220)
at weblogic.webservice.core.soap.SOAPConnectionImpl.call(SOAPConnectionI
mpl.java:57)
... 13 more
javax.xml.soap.SOAPException: Failed to send message: weblogic.webservice.util.A
ccessException: The server at https://www.3pv.net/3PVWebServices/3PVWebServices.
asmx?wsdl returned a 403 error code (Forbidden). Please ensure that your URL is
correct and that the correct protocol is in use.
at weblogic.webservice.core.soap.SOAPConnectionImpl.call(SOAPConnectionI
mpl.java:61)
at com.ceon.pencor.threepv.ThreePVUtils.sendOrderRequest(ThreePVUtils.ja
va:350)
at com.ceon.pencor.threepv.ThreePVAdapterImpl.sendThreePVRequest(ThreePV
AdapterImpl.java:119)
at com.ceon.pencor.threepv.ThreePVAdapterImpl_ydsnbq_EOImpl.sendThreePVR
equest(ThreePVAdapterImpl_ydsnbq_EOImpl.java:46)
at com.ceon.pencor.threepv.ThreePVAdapterImpl_ydsnbq_EOImpl_WLSkel.invok
e(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
ef.java:108)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:353)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:415)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: weblogic.webservice.util.AccessException: The server at https://www.3
pv.net/3PVWebServices/3PVWebServices.asmx?wsdl returned a 403 error code (Forbid
den). Please ensure that your URL is correct and that the correct protocol is i
n use.
at weblogic.webservice.binding.http11.Http11ClientBinding.handleErrorRes
ponse(Http11ClientBinding.java:136)
at weblogic.webservice.binding.http11.Http11ClientBinding.receive(Http11
ClientBinding.java:220)
at weblogic.webservice.core.soap.SOAPConnectionImpl.call(SOAPConnectionI
mpl.java:57)
... 13 more
ERROR : Exception is occurred during connecting url:https://www.3pv.net/3PVWebS
ervices/3PVWebServices.asmx?wsdl
Please help...
Cordially
Sandip

403 Forbidden error calling PL/SQL Procedure from URL

I am getting a 403 Forbidden browser error when calling a PL/SQL procedure from the URL, as in this:
http://<server.port>/apex/SCHEMA.procedure_name/f?p_param1=394&p_param2=2, etc
We are upgrading from HTMLDB 2.0 to APEX 4.0.2. I do not believe the upgrade has anything to do with it, c/o the upgraded app works fine in another APE 4.0.2 environment.
The upgrade is to new machines, new DB and new app server, Oracle Web Tier, Oracle HTTP server deployment.
The dads.conf entries are fine, all standard:
Alias /i/ "/apexd01/app/oracle/product/http/Oracle_WT1/ohs/images/"
Alias /c/ "/apexd01/app/oracle/product/http/Oracle_WT1/ohs/custom_htmldb/"
<Location /pls/apexd>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString dbserver.us.com:1521:SERVER.US.COM ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apexpwd
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
</Location>
The GRANT EXECUTE ON procedure TO PUBLIC is there.
A call to the same procedure via a process in an APEX page works fine - the procedure is OK.
The call from javascript, which sets up the call from the URL, is the one that fails with the 403 Forbidden error.
The same app works fine in another APEX 4.0.2 environment, so I know it is not the JS; It has to be some configuration setting in this environment.
I do NOT have access to the app server.
I have asked that they compare the httpd.conf, and all underlying conf files, to check for differences.
In order for me to be more specific, and hopefully speed up the troubleshooting process, can anyone suggest what other settings to look at?
Thank you - Karen

Hello,
Good catch, but the difference in URL is in fact the difference in my env to theirs. My typo in not correcting my example to match the dads.conf entry of /pls/apexd. My env uses /apex/. Just saves on my typing.
As an update, I asked the DBA to double-check, and yes, the www_flow_epg_include_mod_local function IS there.
www_flow_epg_include_mod_local is an APEX function.
So now we are trying adding procedures to it. I'll let you know if it works.
My previous question remains - why would I need to do this in one env, and not another,
given that the DB GRANTs are there.
Is there a particular app server setting that wil block execution of PL/SL procedures from the URL?
My guess is, there is some difference in configuration settings for the app server, somewhere in the httpd.conf chain.
Since I do not have access to those files, I cannot do a diff myself, as I would have if I the issue was on my machine.
I am in a situation where I can suggest what to do, but that's it. I agree, it's hard to troubleshoot in this situation.
I am being asked "what setting do I need to change?" without the benefit of access to what is there,so I am doing the best I can, without diverting from my work for a deep-dive refresher session on httpd.conf settings.
So, if anyone is aware of some setting that would block execution of a PL/SQL proc from the URL, please let me know,
and of course, if adding a proc to www_flow_epg_include_mod_local works, I'll be happy. Just still curious.
Thank you - K

System Landscape Directory: HTTP response code: 403 (Forbidden)

Hi,
After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
between PI and SLD is not working:
1) error in RWB -
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
2) another error:
8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
3) in the sld:
INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
Any idea ?
Dimitry Haritonov

Hi Venu,
thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
the reason is unknown ... any idea ?
Dimitry Haritonov

OS X Mountain Lion, "The server gave an error during download: 403 Forbidden." && Xcode update "To update this application, sign in to the account you used to purchase it."

I've bought OS X Mountain Lion, the started to download it, close the mac without finish it, and now when im trying to download it agan, the appstore gave me the error "The server gave an error during download: 403 Forbidden.".
I have an update too for the XCode and when im trying to push Update, the AppStore show me an alert with the message:
"You have updates available for other accounts
"To update this application, sign in to the account you used to purchase it."
Help me please, I've allready pay for the update and cannot make use of it.
Thanks

I've bought OS X Mountain Lion, the started to download it, close the mac without finish it, and now when im trying to download it agan, the appstore gave me the error "The server gave an error during download: 403 Forbidden.".
Restart your Mac and follow the instructions here > Mac App Store: How to resume interrupted downloads
You have updates available for other accounts
"To update this application, sign in to the account you used to purchase it."
Help here > Clearing up Mac App Store confusion | Macworld
A recommendation. When upgrading to a new OS X, if it can be avoided, do not interfere with the installation.

Leapord Upgrade - Apache 403 Forbidden

Similar Messages

Maybe you are looking for