Learner receives error: "Only 1 lesson can be active."

A learner using Windows XP and IE 8 is receiving this error message when trying to launch a course in PeopleSoft ELM: "Only one lesson can be active. Please exit the current lesson before launching another session."
We've tried deleting her temporary internet files and clearing her cache, but that did not work.
Hoping someone out there has the answer?

Hi,
In addition to
Naarasimha's answer. a small clarification: As much as the query optimizer the sub query "SELECT...
FROM ROQFLEETCHECK B WHERE ..." might return more then one value and therefore it raise this error. What you can do, is limit
the returned value to one, using "top 1" or aggregate function (as
Naarasimha suggested).
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Similar Messages

Invitation Error: Only the Organizer can change this event

After doing a clean install of Snow Leopard on my MacBook Pro, I was getting the following error when trying to edit some iCal events:
Invitation Error: Only the Organizer can change this event
The iCal events that I couldn't edit had all been ones where I had sent invitations to someone else. When I double clicked them to attempt to edit them, I received a popup that would allow me to accept/decline the event, but not edit it. I noticed in the popup that it had the email address of the original invitee plus my own email address. I'm sure that my own email address wasn't there before.
I took a look at "My Card" in address book and it only had my name and no email addresses.
After the install I had synced iCal and Address Book with MobileMe. The sync said there was a conflict with my Address Book entry and I accepted the one from MobileMe, thinking I hadn't put anything in the one on my laptop yet anyway. I ended up with the original of my Address book entry, but not marked as "my card" and an entry with just my name marked as "my card".
When I merged the two cards and made sure the resulting card was marked as my card, I could then edit the iCal events. I think it was the fact that "my card" now had my MobileMe / .Mac email address in it that allowed me to edit the iCal events.
So if you're having this problem editing events, check your My Card in Address Book and make sure it has the appropriate email addresses in it.
- David
PS - There was an earlier post with this topic, but it didn't mention this solution. I would've replied to that post but it had been archived and replies were not allowed.

I have found a way around this. If you drag the event to your desktop, it will create an .ics file. If you open this file in TextEdit, you can delete the line that begins with ORGANIZER:. Save the file and bring it back into iCal. iCal will now assume you are the organizer, allowing you to edit. You may also want to delete the other attendees in TextEdit, as iCal will also want to send updates if you make changes to the file (because it thinks you're the organizer making changes to your own calendar event).
This isn't an ideal solution, but it lets you make the edits. Hopefully Apple will change this in a future Leopard update or in Snow Leopard.

I recently tried to print a document to an hp printer, but received error 79 message. Can anyone assist me

I recently tried to print a document to an hp printer, but received error 79 message. Can anyone assist me

Google is your friend: Hp Error Code 79, Service Errors 79 Laser Printer Repair
As long as you don’t mind your friend always reading over your shoulder.

I am trying to download trial CC, but i am receiving error cod 205. how can i fix this problem? few months ago, i used trial CC and deleted it.

i am trying to download trial CC, but i am receiving error cod 205. how can i fix this problem? few months ago, i used trial CC and deleted it.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

I CANNOT DOWNLOAD UPDATES RECEIVE ERROR message 0x800f0826 what can i do also cannot use all

i can not install updates .receive error 0x800f0826
cannot use all my symbols on my keyboard

Please give more info so we can help you.
Witch operating system, photoshop cc or cs6 and what error message came up

Mail Receiver Error: java.lang.IllegalArgumentException: can't parse argum

Hi everybody,
I get the error in mail receiver CC:
java.lang.IllegalArgumentException: can't parse argument number
My Payload looks like this:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>The subject</Subject>
<From>mailadress</From>
<To>mailadress</To>
<Content_Type>multipart/mixed; boundary="AaBb--984dfgeSSd3532"</Content_Type>
- <Content_Description>
<attachment filename="Filename.txt">content_of_attachment</attachment>
</Content_Description>
<Content_Disposition>attachment</Content_Disposition>
<Content>Constant</Content>
</ns1:Mail>
Any ideas?
Regards
Mario

Hi Mario..
Go thru this thread for it.
Error Catagory : XI_J2EE_ADAPTER_MAIL
Regards

Error Only one expression can be specified in the expression list when the subquery is not intriduced. Please help

Please help to fix this error
SELECT A.FLEETID,
(SELECT b.fleetid,SIZE,MAKE,PATTERN FROM ROQFLEETCHECK B
WHERE B.AxleNo=1 and B.AxleType = 'OFFSIDE OUTER' AND B.FLEETID = 1819 and B.fleetid = A.fleetid) AS fleetList
FROM ROQFLEETCHECK AS A WHERE a.FLEETID = 1819;
Regards
Pol
polachan

Hi,
In addition to
Naarasimha's answer. a small clarification: As much as the query optimizer the sub query "SELECT...
FROM ROQFLEETCHECK B WHERE ..." might return more then one value and therefore it raise this error. What you can do, is limit
the returned value to one, using "top 1" or aggregate function (as
Naarasimha suggested).
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Trying to download free photoshop and received error code 148:3 can you help

Need help tying to download free photoshop and receiving error code 148:3

Something is preventing the licensing from working. Make sure to run with sufficient user privileges and file permissions.
Mylenium

Only apple logo appears, cannot restore ipod, tried to restore and received error code 1602, what can I do?

I am trying to figure out why I cannot restore my Ipod touch 64, when I get through the whole restore it states "error code 1602". I have used the original cable that came with the Ipod and have tried it on two different computers. When I turn it on only the apple logo appears and nothing else happens. Please help

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
If the phone is stuck on the Apple logo, you can try a hard reset (deletes no info). Press and hold the power button and Home button until the phone turns off. Then try to power it up again.
Simply restarting your computer will not cause your iPhone to stop working unless there is a major issue with software conflicts on your computer... i.e.... corrupt iTunes installation.
Try disabling any security software you might have and avoid using and USB hubs or extenders etc.
If the hard reset doesn't work in getting your phone to boot up, then you'll have to do a restore of the device.

Trying to update keep receiving error message 1921 What can I do to correct this problem?

I received a message during an update for Adobe Acrobat 11. The message says that I may not have sufficient priviledges to do this. I don't understand as I am the only one who uses this computer .

Hi,
Please refer the thread: http://forums.adobe.com/message/5031535 with similar issue.
Regards,
Romit Sinha

Getting error message "Only a type can be imported-" when trying to execute jsp page

I get the error: "Only a type can be imported. com.adobe.cq.TestServiceImpl resolves to a package in adobe day cq5
I have created one bundle and installed in felix console. The status of the bundle is also Active. And also it is available in both service and component console.
Here is my TestServiceImpl class in com.adobe.cq bundle
package com.adobe.cq;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.BundleContext;
import org.osgi.service.component.ComponentContext;
import javax.jcr.RepositoryException;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Properties;
//src.component
//declares the class component. This will provide a wrapped ManagedService component in the OSGI container.
//src.service interface="SampleService"
//declares the service we are offering. Actually, the interface attribute is superflous, as by default, all implemented Interfaces are used.
@scr.component
@scr.service interface="testService"
@Component(immediate = true, metatype = true)
@Service
@Properties( {
@Property(name = "service.description", value = "abcd"),
@Property(name = "label", value = "myLabel") })
public class TestServiceImpl implements TestService {
public String sayHello() {
     return "Hello World!";
Here is my jsp code
<%@include file="/libs/foundation/global.jsp"%><%
%><%@include file="/apps/mine/includes/functions.jsp"%><%
%><%@ page import="com.adobe.cq.TestServiceImpl,
org.apache.sling.api.SlingHttpServletRequest,
                java.util.List"%><%
%><%
SlingHttpServletRequest r = (SlingHttpServletRequest)request;
                TestServiceImpl testService = sling.getService(TestServiceImpl.class);
                out.println("testService:::"+testService);
%>
<div id="te-nav" style="display:block !important;">
</div>
Is it because of am using annotation in TestServiceImpl class?
Could you please tell me how to fix it?
Regards,
Anderson

Hi Pawan,
Thanks for your information. It was problem with my pom.xml It started to work after changing my POM.xml
I am not able to get sling service for TestServiceImpl. But I am only able to create TestService which is my interface. I need to get reference for TestServiceImpl class not for TestService interface. Please help me to make it.
i have created TestServiceImpl and TestService class for testing whether my bubdle is crating all the folder structure or not.
But my requirement is like assume class A has some methods like getMenuLink, setMenuLink.. And In class B i am calling some methods in class A and doing some manipulation in createLink method.
Here class B does not have any interface. Not implementing any interface. But I need to get class B refererence via sling.getService.
I know that if we are using maven SCR plugin..we need to have @component, @service. And All java classes are not services. Will it work if I add activate, deactivate method in class B?
Could you please tell me how to proceed next?
Thanks,
Anderson

Agent Upload error: ERROR-400|ORA-01461: can bind a LONG value ...

Periodically receiving the following error on our Grid Control machine:
[oracle@lugc01 agent10g]$ ./bin/emctl upload agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD upload error: Failed to upload file B0000021.xml: HTTP error.
Response received: ERROR-400|ORA-01461: can bind a LONG value only for insert into a LONG column
This is the agent that is on the host that runs Grid Control. GC Seems to be running fine, but the agent has this problem quite regularly. This also seems to happen on other linux 10.2.0.4 agents as well.
To remedy it, I go in and remove the upload data in $AGENT_HOME/sysman/emd/upload and then restart the agent. I don't like doing this.
Any ideas?

Hi
The error display is very strong. The mean is that the agent try upload a file to the OMS and when the OMS Server go to insert the data in a SYSMAN Table , the value is of a LONG COLUMN and the table not have this type of column.
Please provide me:
- When the error appear , take the xml file and send me
- Run this comand in the agent:
emctl config agent listtargets
If i have the xml file, i can try to solve the problem
Regards
Roberto Hernandez
[email protected]

Only period 012 can be posted in the repeat run

Hi Experts,
And when i am doing AFAB Click on Repeat Run Excute inTest Run
System give another error:
Only period 012 can be posted in the repeat run
    Message no. AAPO516
Diagnosis
    You want to carry out a repeat depreciation posting run in period 001.
    However, the last posting run was for period 012.
System Response
    The repeat run cannot be carried out. Processing is cancelled.
Procedure
    Start the repeat run again using period 012.
Waiting for reply.
In advance thanks
Regards,
Jemes

Hi,
Repeat run is possible only in the last executed period of relevant year which is not closed in AA and GL.
Best Regards,
Madhu

Only a type can be imported. x.y.z.Utility resolves to a package.. HELP!!!

anyone help me.. pls..
the class exists properly in the package folder.
No error found as I compiled it.
Tomcat5.5 + JDK-1.5.0_06 + JBoss-4.0.2...with a Struts framework.
the error is really special for me. I tried all opinions to sort it out.
I changed import file to the other at 1 line. the same error occurred, though.
ex) <@ page import="x.y.z.Test" %> or <@ page import="x.y.z.AnyClass" %> --> ERROR: Only a type ~~~
if delete that line, 404 error is showed. stuck~~~~~
other jsp pages are good. Only the type's page below causes the error. weird~
what's problem? Had anyone had a same problem?
aa.jsp---------------------------------------------------------
<@ page import="x.y.z.Utility" %>
<jsp:forward page="/servlet/MypageManager">
<jsp:param name="ACT" value="main">
</jsp:forward>
2009. 5. 6 ¿ÀÈÄ 2:03:59 org.apache.catalina.core.StandardWrapperValve invoke
½É°¢: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
Only a type can be imported. x.y.z.Utility resolves to a package
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
     at org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:414)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:297)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:276)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:264)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:541)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:833)
     at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:639)
     at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1285)
     at java.lang.Thread.run(Thread.java:595)

aaa.jsp
<%@ page contentType="text/html; charset=euc-kr" import = "kr.co.gen128.common.Utility" %>
<jsp:forward page="/servlet/MypageManager">
    <jsp:param name="ACT_TP" value="MYPAGE_MAIN" />
    <jsp:param name="TOP_MENU" value="MYPAGE" />
    <jsp:param name="CENTER_TITLE" value="MYPAGE_MAIN" />
</jsp:forward>aaa_jsp.java
package org.apache.jsp.mypage;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.jsp.*;
import kr.co.gen128.common.Utility;
public final class index_jsp extends org.apache.jasper.runtime.HttpJspBase
    implements org.apache.jasper.runtime.JspSourceDependent {
private static java.util.List _jspx_dependants;
public Object getDependants() {
    return _jspx_dependants;
public void _jspService(HttpServletRequest request, HttpServletResponse response)
        throws java.io.IOException, ServletException {
    JspFactory _jspxFactory = null;
    PageContext pageContext = null;
    HttpSession session = null;
    ServletContext application = null;
    ServletConfig config = null;
    JspWriter out = null;
    Object page = this;
    JspWriter _jspx_out = null;
    PageContext _jspx_page_context = null;
    try {
      _jspxFactory = JspFactory.getDefaultFactory();
      response.setContentType("text/html; charset=euc-kr");
      pageContext = _jspxFactory.getPageContext(this, request, response,
                     null, true, 8192, true);
      _jspx_page_context = pageContext;
      application = pageContext.getServletContext();
      config = pageContext.getServletConfig();
      session = pageContext.getSession();
      out = pageContext.getOut();
      _jspx_out = out;
      out.write('\r');
      out.write('\r');
      out.write('\n');
      if (true) {
        _jspx_page_context.forward("/servlet/MypageManager" + (("/servlet/MypageManager").indexOf('?')>0? '&': '?') + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("ACT_TP", request.getCharacterEncoding())+ "=" + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("MYPAGE_MAIN", request.getCharacterEncoding()) + "&" + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("TOP_MENU", request.getCharacterEncoding())+ "=" + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("MYPAGE", request.getCharacterEncoding()) + "&" + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("CENTER_TITLE", request.getCharacterEncoding())+ "=" + org.apache.jasper.runtime.JspRuntimeLibrary.URLEncode("MYPAGE_MAIN", request.getCharacterEncoding()));
        return;
    } catch (Throwable t) {
      if (!(t instanceof SkipPageException)){
        out = _jspx_out;
        if (out != null && out.getBufferSize() != 0)
          out.clearBuffer();
        if (_jspx_page_context != null) _jspx_page_context.handlePageException(t);
    } finally {
      if (_jspxFactory != null) _jspxFactory.releasePageContext(_jspx_page_context);
}Two types of error occurred randomly.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
Only a type can be imported. kr.co.gen128.common.Utility resolves to a package
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
Only a type can be imported. kr.co.gen128.common.Utility resolves to a package
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:297)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:276)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:264)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to load class for JSP
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: Unable to load class for JSP
     org.apache.jasper.JspCompilationContext.load(JspCompilationContext.java:598)
     org.apache.jasper.servlet.JspServletWrapper.getServlet(JspServletWrapper.java:147)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
java.lang.ClassNotFoundException: org.apache.jsp.mypage.index_jsp
     java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     java.security.AccessController.doPrivileged(Native Method)
     java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     org.apache.jasper.servlet.JasperLoader.loadClass(JasperLoader.java:133)
     org.apache.jasper.servlet.JasperLoader.loadClass(JasperLoader.java:65)
     org.apache.jasper.JspCompilationContext.load(JspCompilationContext.java:596)
     org.apache.jasper.servlet.JspServletWrapper.getServlet(JspServletWrapper.java:147)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.Thanks a lot.
Any other you need to see?

Signed into hbo now. almost immediately received error saying my subscription expired but it was only 30 minutes old. tried to resubscribe but it did not recognize my email address. what the heck????

signed into hbo now. almost immediately received error saying my subscription expired but it was only 30 minutes old. tried to resubscribe but it did not recognize my email address. what the heck????

i just called hbo now. they are on system overload. apparently no one can sign in. she recommended i try to sign in during the middle of the night to see if it works. they "hope" to have the problems resolved in short order. she said not to sign up for a new subscription because you will be charged for 2 subscriptions.

Learner receives error: "Only 1 lesson can be active."

Similar Messages

Maybe you are looking for