Learning Filtering: Smart Collections doesn't show all filtered images

I'm studying using Classroom In A Book so this test is small and only using the few images provided on the CIAB CD.
It says in the book that a Smart Collection is a selection filtered according to whatever rules you specify.
This is fine, but when I click the down arrow to the left side of the screen to see the listings under Smart Collections only some of the filtered images are shown. Images that I marked with red are shown as a Smart Collection. Images that I marked with Green (only one) does not show. A single image that I marked with five stars shows up as a Smart Collection, so it can't be that you need more than one item marked before it shows up as a Smart Collection. I made sure that I have highlighted the folder that contains the images (made it local) and that they are displayed in Library Mode and in Grid View.
What might cause some of the images I have applied filter attributes to not to show up in Smart Collections?
TIA,
Ken

dorin_nicolaescu wrote:
Images that I marked with red are shown as a Smart Collection. Images that I marked with Green (only one) does not show. A single image that I marked with five stars shows up as a Smart Collection
What does the book say? It says "a Smart Collection is a selection filtered according to whatever rules you specify." It means the rules you specify for you r smart collection. These are default "canned" lightroom collections. The first happens to have the rule "show labelled with red", the second — "show 5-star images". Images tha match the rules defined in a SC - are displayed in that SC.
Double-click any smart collection to see its rules.
To create a new smart collection with your own rules, click Library>New Smart Collection.
The Smart Collections I have were created without me double-clicking on anything. The book just told me to try out some of the ways to mark images and to try out each way. All of a sudden, Smart Collections appeared with some of the marked images. I was just wondering why it stopped at some but did not do them all? Also, what if I don't want Smart Collections at this point? How do I turn it off from making arbitrary Smart Collections without my prompting?
Don't get me wrong dorin_nicolaescu, I am a beginner and know nothing. You sound like you have a good grip on what Smart Collections are and how they work. What you have writtenis helpful, especially the part about "To create a new smart collection with your own rules, click Library>New Smart Collection."
I am still in a Fog about why Smart Collections starts collections on its own.

Similar Messages

Collect doesn't show all methods

Hi,
When I run collect on a small java program
I can see all the methods that are called with
the analyser.
(er_print) functions
0. 0.050 Func_loop.func_a()
0. 0.040 Func_loop.func_b()
0. 0.020 Func_loop.func_c()
However, doing the same for tomcat I can't see any
of the java methods contained in a servlet or war file.
Anyone with similar experiences and a solution?

Hi,
When I run collect on a small java program
I can see all the methods that are called with
the analyser.
(er_print) functions
0. 0.050 Func_loop.func_a()
0. 0.040 Func_loop.func_b()
0. 0.020 Func_loop.func_c()
However, doing the same for tomcat I can't see any
of the java methods contained in a servlet or war file.
Anyone with similar experiences and a solution?

HP 5550 web server doesn't show all required tabs

Good afternoon!
I have an issue with web server on hp 5550 Laserjet. Everything was good, but after reboot, it doesn't show all tabs such as "Information", "Setting", "Networking". It shows only "Home" and "Networking"...
Do someone know how to fix this issue?
Thanks in advance!
Any help will be appreciated!
Igro

Your best bet would be to try Rapidweaver: www.realmacsoftware.com
Best,
Andrew
I am not very into this stuff (can't write HTML),
do you might have a suggestion for an other
WebsiteBuilder?
We can't afford GoLive (which was very cool in the
early days built by CyberStudio) nor have I time to
learn or buy the complex Dreamweaver.

Syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help

syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help

I have the same problem with podcast playlists. When I go to the music window in my iPhone devices section, the playlists I have created on my macbook pro in iTunes do not appear as an option to sync with the iPhone. I know some web radios streams, like the BBC, won't transfer because of compatibility issues, but the playlists of podcasts that I have created consist entirely of podcasts downloaded from the podcasts section on the iTunes Music Store. They used to show up and sync properly before I upgraded to OS 5.1.1, but now they don't.
Does anyone have a fix and am I right in surmising that the cause is a glitch in OS 5.1.1?

ICal doesn't show all text for the activity

When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?

Gabriella,
Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
View>"Make Text Smaller" is also an option for those with Eagle Eyes.

Safari 5 doesn't show all images on a webpage

Hi,
I'm using Safari 5, and my Safari doesn't always show all the images on a webpage but shows a "blue question mark" instead of an image. sometime when I try to reload the webpage, the image (that was a blue question mark) appears but some other images become the "blue question mark".
The "Display images when the page opens" checkbox is checked, the connection has no problems…
I've tried on Safari 5 on my PC, and it doesn't have this problem, all the images loaded well. The problem seems like only appears in Safari on Mac.
it's really annoying…
Any idea, please.

HI,
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. Try loading a page now. If you still have problems...
Web pages include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
Relaunch Safari and try again. If that didn't help...
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
If nothing above helps, login to another user account and try Safari there. If you have problems with pages loading correctly there, then it's a system wide problem. Hopefully not.
Carolyn

ATV doesn't show all photos in slideshow

My ATV3 doesn't show all my photos in slideshow. It seems to repeat the same, say 50, over and over, even though I have about 400 in the folder on my windows7 PC.
Whats the fix?
Thanks
Andy

For the avoidance of doubt are you talking about the screensaver or the slideshows.
Slideshows should show all your photos, but screensavers will not. Screensavers need to save the photos to the Apple TVs flash storage, the Apple TV doesn't have a lot of this and so limits the number of photos it uses.

Apple TV doesn't show all pictures in photo stream

I have about 1000 pictures in my photo stream, but my Apple TV doesn't show all of them. It shows only 304 photos. How can I get all my photos to my Apple TV via photo stream? I have the latest Apple TV and the latest operating system on it.
Edit:
And I have tried to reset Apple Tv and photo stream.

Welcome to the Apple Community.
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter

Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter what I do it is not showing in LR that it is saved. I spent 2 days with Seth Resnick trying to correct this and we re created my catalog. It was ok, until I imported new images and same problem. Now I have a new problem, when I bring image to PS it saves it but does not bring back to LR. Am I the only one out there who has this problem?

See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Package Body in the tree doesn't show all procedures

I am using Sql Developer 1.0.0.14.67 on Win XP Professional,
DB servers Oracle 9i on both Linux Red HAt and Win XP Professional
I have troubles with one of packages - in the tree under Package Body SQL Developer doesn't show all procedures of this package body.
On the right panel all package body source is shown, but in the tree under Package Body it shows names of only procedures up to certain line in the source code - up to line where first Private (not included in Package Spec) procedure code starts.
BUT, there are more Public procedures in package body below this Private procedure - and all of procedures below first private are not included in the tree under Package Body

I find this quite annoying. I cannot use the navigation panel on the left to find the location of all functions and procedures in the package body. The 'missing' procedures are listed under the package spec, and double clicking on them takes me to the spec and not the body.
I'm running v1.2.1.32.13. Is this a know issue and is there a fix planned?

Ipod doesn't show all the songs listed in Itunes even after sync is complete

Ipod doesn't show all the songs listed in Itunes even after sync is complete

I'm going through the same thing, I've tried de-authorizing and re-authorizing my computer and that seems to help. I haven't gotten all my songs back yet, but I've got about 75% of it back.

Distiller 'default settings' blank and doesn't show all job options

We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should. Only 2 of them are showing up in the pulldown.
How can I fix this?
I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
Thanks!

I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
See screenshot below:
What is the relevance of this? We seem to have the same location for the output module file.
Why does mine not work?
See screenshot below:
The Adobe Output Module is in my Startup Scripts but it still doesn't work.

M3000: show-disks doesn't show all disk.

Hi all,
I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
So, a is disk0 1 2 3 ?
and
b is disk 0 1 2 3?
thanks
Please help
====================================================
{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
Wait for link up -
Firmware version 4.03.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present
/pci@0,600000/pci@0/pci@0/scsi@0
MPT Version 1.05, Firmware Version 1.31.00.00
Target 0
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e813d912 PhyNum 0
Target 1
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84aaf3e PhyNum 1
Target 2
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84ab082 PhyNum 2
Target 3
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e8392a42 PhyNum 3
Target 4
Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
SATA device PhyNum 4
{0} ok
{0} ok show-disks
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
c) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
{0} ok

Hi.
It's not bug, it's a feture. :)
show-disks show available controlles, that can have connected disk.
For create alias you should manualy add what disks exactly you want use.
disk0 /pci@0,600000/pci@0/pci@0/scsi@0/disk@0
disk1 /pci@0,600000/pci@0/pci@0/scsi@0/disk@1
disk2 /pci@0,600000/pci@0/pci@0/scsi@0/disk@2
disk3 /pci@0,600000/pci@0/pci@0/scsi@0/disk@3
Generaly this aliases alredy created at POST.
Check output of devalias
Regards.

IPhone doesn't show all music when I connect to network in iTunes

Hi
In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
Thanks
Flybridge

PUSH

My Dock doesn't show all applications with shortcut

My Dock doesn't show all applications with shortcut
Apple tab only shows some applications on my list not all, anyone know why? I went under system settings to fix it and there is no option for it.
Thanks!

Perhaps I don't understand your question, but if you think that the doc shows every application you have on the computer, this is incorrect. If you want certain applications to be shown on the dock you have to add them to the dock. The dock comes preset with a few select Applications Apple wants to feature but you are free to add others or remove ones you don't use.
Patrick

Learning Filtering: Smart Collections doesn't show all filtered images

Similar Messages

Maybe you are looking for