Learning Map Authorization

Hi there,
is there apossibility to restrict the access to a learning map for specific users?
the problem i face, while writing an authorization concept, is that if i authorize a user to the transaction SOLAR_LEARNING_MAP, he will be able to access and delete all learning maps.
is there a possibility to restrict this... i dont think that the object D_MD_DATA helps...
thx guys

Hi Arthur,
I am not an expert on this subject; however, based on my understanding, here's a reply.
If those users currently have been given Std. SAP Composite Roles like:
SAP_SOL_PM_COMP
SAP_SOL_AC_COMP
I don't think you can selectively disable authorisation to delete.
On the other hand, if the existing Authorisation Concept you have is very custom-made one, then you can perhaps play around with the following single roles:
SAP_SOL_TRAINING_EDIT & SAP_SOL_TRAINING_ALL - for people with complete authorisations
If you are on SP15, the name of the single Role seems to have changed to SAP_SOL_TRAINING_ADMIN
For those who have to view only, and not edit/delete in anyway, please remove these single roles and check. Their oter Display authorisations should perhaps provide them with the ability to display learning maps by following the URL sent to them (may be they'd need SAP_SOL_KW_DIS)
Best regards,
Srini

Similar Messages

  • Learning Map (HTML) Feedback Authorization

    Hi,
    We are using SAP EHP 1 for SAP Solution Manager 7.0.
    I have created learning map using transaction SOLAR_LEARNING_MAP and I am able to view the content in webpage.
    But when I click on feedback button in the web browser system gives a pop up message u201CYou are not authorized to make changes". 
    Help me with details of what authorization / config are required to give the feedback.
    Regards,
    Praveen

    The issue is solved by following the below.
    check the user mainatined in the exteranl alias /sap/bc/solman/defaultuser in SICF.
    Actually this user is used to open the learningmap and this user needs to have the role SAP_SOL_LEARNING_MAP_DIS assigned.
    Addtionally in the role for the authorization object D_MD_DATA
    the value '10' ('Change Model Instance') for DMD_ACTION has to be
    available, as this is needed to send feedback in the browser.
    Addtionally please implement the note:
    1527024 Message 'Object is locked by ..' in Learning map
    into your system.
    After you have implemented the note please follow these steps:
    -> Open the learning map in edit mode with transaction
    SOLAR_LEARNING_MAP
    -> click 'SAVE' button
    -> go back to intial screen of SOLAR_LEARNING_MAP
    => open the learningmap in the browser and test again to send feedback
    Regards,
    Praveen

  • Learning Map

    Hi all
    can someone assist? When I create a Learning Map, I also add document, after adding them in SOLAR02. When I send the link to a user, the map displays perfect BUT without any of the added documentation.
    Jaco Snyman

    Hi Andrea
    Yes, I solved the problem.
    First make sure that you have created a project in Solution Manager so you can access it via SOLAR02.
    In Solar02 to you "load" the documentation in the "Training Tab", into the structure on the left.
    Proceed as follow:
    1. Open a new session and enter TC: SICF for hierarchy type ALIAS at service path /sap/bc/solman/defaultuser. Check the user which is setup
    2. Display this user with transaction SU01
    3. Check if the user has role SAP_SOL_LEARNING_MAP_DIS assigned.
    4. Navigate to the role and check for open authorizations
    5. Maintain the missing values (use '*' for all).
    6. Generate the profile.
    It should work
    Jaco Snyman

  • Problem in Learning Map Sending

    Hi
           I am Creating a Learning map in solution Manager4.0 , i can able to open it  in browser, the Documents details are displayed but i click the document it was not download only empty browser was open ..
    Any one help me to solve this...
              and also I have another problem in send to users  the Learning map Deployment window was open but there is no user group listed
           Any Solution Please......
    And also i need Complete Configuration Steps to Create LearningMap...
                   Help....Please....

    hi,
    can you do the following steps
       Choose Environment ® Maintain End User Roles, in the transaction Configuration (SOLAR02).
           2.      You go to the transaction Maintain Objects (PP01).
           3.      Create a Job.
           4.      Assign Positions to the Job.
           5.      Assign Users to the Positions.
    The learning map is later sent to the E-Mail address in the address data of these users.
           6.      Create an Organizational Unit.
           7.      Assign Positions to the Organizational Unit.
           8.      Assign Users to the Positions.

  • Learning Map in SolMan

    Hi ALL,
    We created a learning map in SolMan and I am not able to send it to users. When I click on button "Send to Users" in T-SOLAR_LEARNING_MAP, I get a message 'The page cannot be displayed'.
    I checked for SAP Note 960811 - "Error when sending learning map to a long list of users". But, I wanted to send the learning map to only 2 users.
    Can any one suggest what the problem could be?
    Appreciate your response.
    Thanks,
    Vom

    Be sure you have the latest support pack installed for sol man. It helped for us.

  • Learning Map html error

    Hi, im having this problem with Learning maps, and cant figure out what is the problem, I keep having the same error message:
    "Logon Error Message"
    "http://sci.itsgroup.com.br:8000/sap/bc/solman/defaultUser/LearningMap/start.htm wurde abgebrochen, da der entsprechende Service nicht verfügbar ist."
    "    *  Der Abbruch trat auf dem System SCI und mit dem Fehlercode 404 und dem Grund No Extension Found auf.
    Der ausgewählte virtuelle Host war 0 . "
    But I belive ive already done everything for correct functioning of learning maps.
    All the following services are active:
    /sap/bc/bsp/sap/learning_map
    /default_host/sap/bc/bsp/sap
    /default_host/sap/bc/bsp/sap/system
    /default_host/sap/bc/bsp/sap/public/bc
    /def ault_host/sap/public/bc
    /default_host/sap/public/bc/ur
    /default_host/sap/public/bsp/sap/public
    /default_host/sap/public/bsp/sap/public/bc
    /defaul t_host/sap/public/bsp/sap/system
    /default_host/sap/public/bsp/sap/htmlb
    Ive also creates the External Alias:
    /default_host/sap/bc/bsp/sap/learning_map
    /default_host/sap/bc/solman
    The services also have the correct HTML user set in logon data. Im using the user "SOLARSERVICE" with the role SAP_SOL_LEARNING_MAP_DIS.
    And also my FQDN is correct, becose all my other html aplication as: workcenters, issue mgmt, test sequence are working fine.
    There is anything ive done wrong or missed?

    Hi Magus,
    This may be worth a try - at work here we have a proxy server defined in our browser settings so can you check your settings and disable any proxy server for IE or Firefox etc?
    This should bypass your error and connect to your SolMan as it seems you have correctly completed all other tasks.
    Thanks,
    -Rohan

  • Solar Learning Map in web browser issue

    Hi
    I have assigned Learning material and end users in SOLAR02, after i created a learning map in SOLAR_LEARNING_MAP.
    the problem is when is display learning map in web browser it is only showing the structure with all the units, but the documents assigned to it are not visible nor it is opening the units by the "OPEN" option in the extreme right corner of the Unit in web brwoser??
    I have serached the problem and found note 775050 , but it is "Cant be implemented" state and by doing the steps manual its not resolving the problem.
    Please help

    Hi
    I have the following Issue, it is the same or it is different?
    https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
    Regards.
    Juan.

  • Solution Manager Learning Map http error 403

    Hi,
    I created a new learning map in solution manager using solar_learning_map, when I attempted to display the learning map in the web browser i received the following error.
    <i><URL> call was terminated because the corresponding service is not available.
    The termination occurred in system ISD with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .</i>
    If anyone else has experienced this error before can you please give me some guidance on resolving this issue.

    The Note exists in service marketplace. (Topic is Inactive services in the Internet Comm Framework).Here is the solution as per the Note.
    Solution
    Listed below are some services that must be activated in the system
    depending on the operational scenario:
    Support for the Internet protocol (HTTP, HTTPS and SMTP) in the SAP Web Application Server
    /default_host/sap/public/icman
    Note: After you have installed SAP Web Application Server, you must ensure that this service is activated in transaction SICF. Through this the ICMan process can (for example) make decisions concerning the distribution of HTTP requests to the corresponding server.
    Using load distribution
    with the message server
    /default_host/sap/public/icf_info
    /default_host/sap/public/icf_info/logon_groups
    /default_host/sap/public/icf_info/urlprefix
    with the Web Dispatcher
    /default_host/sap/public/icf_info
    /default_host/sap/public/icf_info/icr_groups
    /default_host/sap/public/icf_info/icr_urlprefix
    Using Business Server Pages (BSP)
    /default_host/sap/bc/bsp/sap
    /default_host/sap/bc/bsp/sap/system
    /default_host/sap/bc/bsp/sap/public/bc
    /default_host/sap/public/bc (available for 620 with Support Package 34)
    /default_host/sap/public/bc/ur (available for 620 with Support Package34)
    /default_host/sap/public/bsp/sap/public
    /default_host/sap/public/bsp/sap/public/bc
    /default_host/sap/public/bsp/sap/system
    /default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)
    Note: In addition to these general BSP services, you still have to activate the corresponding application services in the ICF tree. The service for the application is generally found under the ICF node /default_host/sap/bc/bsp/sap/<application>.
    Using the BSP logon procedure
    /default_host/sap/public/bsp/sap
    /default_host/sap/bc/bsp/sap/system
    /default_host/sap/public/bsp/sap/public
    /default_host/sap/public/bsp/sap/system
    BSP test applications for troubleshooting
    /default_host/sap/bc/bsp/sap/it00
    /default_host/sap/bc/bsp/sap/sbspext_htmlb
    /default_host/sap/bc/bsp/sap/sbspext_xhtmlb
    /default_host/sap/bc/bsp/sap/htmlb_samples
    As of Release 6.30:
    /default_host/sap/bc/bsp/sap/bsp_verificatio
    Using Business Information Warehouse (BW)
    /default_host/sap/bw
    Web Applications
    /default_host/sap/bw/BEx
    /default_host/sap/bw/Mime
    Reporting agent preliminary calculation
    /default_host/sap/bw/ps
    Drag and Relate in the portal
    /default_host/sap/bw/dr
    Data access using XMLA
    /default_host/sap/bw/xml and all subordinate subservices
    Document integration in the BEx Analyzer and Web Applications.
    /default_host/sap/bw/doc and all subordinate subservices
    Formatted reporting
    /default_host/sap/bw/ce_url
    Assignment of SAP icons
    /default_host/sap/public/bc
    /default_host/sap/public/bc/icons
    /default_host/sap/public/bc/icons_rtl
    /default_host/sap/public/bc/webicons
    /default_host/sap/public/bc/pictograms
    Assignment of Web Dynpro ABAP (WDA) applications
    /default_host/sap/bc/webdynpro
    /default_host/sap/public/bc
    /default_host/sap/public/bc/ur
    /default_host/sap/public/bc/icons
    /default_host/sap/public/bc/icons_rtl
    /default_host/sap/public/bc/webicons
    /default_host/sap/public/bc/pictograms
    /default_host/sap/public/bc/webdynpro/* (ssr, mimes, and so on)
    /default_host/sap/public/myssocntl
    Note: In addition to these general WDA services, the corresponding application services in the ICF tree also need to be activated. The service for the application is generally found under the ICF node /default_host/sap/bc/webdynpro/sap/<application>.
    Assignment of Web Dynpro ABAP (WDA) development environment
    /default_host/sap/bc/webdynpro/sap/public/bc/viewdesigner/
    /default_host/sap/bc/wdvd/
    /default_host/sap/bc/webdynpro/sap/configure_application
    /default_host/sap/bc/webdynpro/sap/configure_component
    /default_host/sap/bc/webdynpro/sap/wd_analyze_config_appl
    /default_host/sap/bc/webdynpro/sap/wd_analyze_config_comp
    /default_host/sap/bc/webdynpro/sap/wd_analyze_config_user
    Note: These ICF nodes are used for the WDA configuration editor ONLY. The nodes are only allowed to be active in a development system, and under no circumstances in a production system (due to a security risk).
    WDA test applications for troubleshooting
    /default_host/sap/bc/webdynpro/sap/wdr_test_events
    /default_host/sap/bc/webdynpro/sap/wdr_test_ui_elements
    /default_host/sap/bc/webdynpro/sap/wdr_test_table
    /default_host/sap/bc/webdynpro/sap/wdr_test_popups_rt
    ICF test applications:
    /default_host/sap/bc/echo
    Among other things, this service returns information about the registration procedure being used, the header and form fields, and the generated SSO cookie for the executed request. Therefore, this service should only be activated for troubleshooting purposes.
    /default_host/sap/bc/error
    This service generates some error situations in the system and should only be activated for troubleshooting purposes.
    /default_host/sap/bc/srt/xip/sap
    You want to fix the Web service error message "Could not determine WSDL address (ICF_ERROR), SRT_REG038" in connection with XI services.
    Using Support Package SAPKB62006, the following problems were solved in connection with inactive services:
    The "RAISE_EXCEPTION" ABAP runtime error no longer occurs for an inactive host.
    The error text "Forbidden" was replaced with "Service is not active" for an inactive service.
    Thanks
    Sudhan Shan

  • How to composite NetWeaver Administration Learning Map

    In SAP training catalog, there are three roles for NetWeaver administration, shown below:
    Cross Component Role: General Administration
    Cross Component Role: Database Administration
    Cross Component Role: User & Security Administration
    (http://www36.sap.com/services/education/catalog/netweaver/administration.epx)
    I want to composite three roles into one learning map. Could you please advise on how to do it? Is there any sample for reference? Thanks so much.
    James

    done

  • Learning Maps-Capture the Organizational Unit of the end user feedback

    Can anyone help me on this:
    Problem: The requirement is to track the enduser feedback from Learning Maps to get information of an organizational unit.
    As per documentation LearningMap feedback is anonymous.
    I would like to know whether there is any BADI or user exits available to solve the problem?
    Message was edited by:
            Ramesh Ramanathan

    Hi,
    Have you maintained your Organizational data? Did you assign any job to any user in the organizational hierarchy. You need to maintain you PPOMA_CRM first in order to assign any roles there.
    Hope this helps
    Rajeev

  • Learning maps for Marketing Consultant

    Dear Gurus,
    Where can I find role based learning map for a marketing consultant in Marketplace?
    If I can What authorisation is needed?
    cheers,
    Mark

    hi gun,
    What I was looking for in particular is, we have role based learning maps for Marketing consultants for CRM4.0 in service market, which has got tutorials for ELM,
    BudgetManagement,Digital asset management etc.
    I wasn't able to locate it with my ID does it need any additional privilages?
    if yes who can access them?
    cheers,
    Mark

  • Include web link document into learning map

    Hellow!
    1. We have all user instruction in our intranet web server (instructions are created using RWD ).
    2. I insert this instruction into training material tab in solar02 transaction in solution manager.
    3. I create learning map in solution manager and include these training material into this map.
    4. And then I open this map in web browser. Map is ok , chapters units and so on but links into training materials are not appears in page. Just empty rectangles.
    Any Ideas ?
    Andrey Garshin.

    Hi,
    Please check whether the needed roles and authoraisation assigned.
    The roles are below "SAP_SOL_LEARNING_MAP_DIS,SAP_DMDDEF_DIS"
    more on refer here [Overview of SAP roles|http://help.sap.com/saphelp_sm32/helpdata/en/45/cb27429d16db2ce10000000a1550b0/content.htm]
    And please verify your config steps against the document [http://wiki.sdn.sap.com/wiki/display/EHP/SolutionManagerLearningMaps|http://wiki.sdn.sap.com/wiki/display/EHP/SolutionManagerLearningMaps]
    Jansi

  • Mapping authorization field IDs to field names (description)

    Hello Folks,
    I am trying to map the authorization field (technical ) names to field descriptions (long names)
    Backgroud: I do not have enough input from the functional team yet on restrictions at data level. I have pulled out a list of orgfield values from USORG. Now i am trying to map the other authorization fields to their descriptions.
    Table AUTHX only maps the field to the data element and while table DD04V lists the long field names for a given data element, i need to drill down before i get the description and thats for each fieldname / data element.
    Question: Is going through SU20 for each object the best way to map the field description or is there a better way to map the auth field IDs to their description. And i mean for multiple input as there are scores of auth fields...
    Regards,
    Prashant

    Thanks Jurjen, that helped a lot.
    I downloaded the authorizations into an excel tough, (did not use uncoverted format).
    Solution in Excel: Since there are a lot of blank cell values
    -- name the columns clearly
    create a pivot table
    In the pivot select only the field technical name and field description columns
    For some reason when the other columns are selected, everything is going blank for values
    I am sure others are better with Excel than i am
    Regards,
    Prashant

  • Learning map - XI, ALE, EDI, IDOC

    Hi all!
    I´m trying studying IDOC but it´s complicated. I found many documents talking about EDI, ALE and XI.
    I don´t know many things about EDI, ALE and XI. So, my question is: Have i to start studying about this topics (ALE, EDI and XI)?? I think that i need understand this terms for after to learn IDOC.
    If the answer is YES, wich one should be first one?
    Somebody has any document or link about this topics? I lookup in SDN Articles and Blogs but i didn´t find anything.
    Thanks a lot!

    Hi,
    Please go through  following Link,
    https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC
    https://wiki.sdn.sap.com/wiki/display/ABAP/ALE+IDOCS
    https://wiki.sdn.sap.com/wiki/display/ABAP/ALE%2CIDOC
    Thanks & Regards,
    ShreeMohan

  • Learning SAP BW authorizations structure and hierarchy  -  concepts

    Hello Experts,
    I need a good document for learning Authorizations structuring and hierarchy in SAP BIW 3.5 . I am giving authorizations in BIW but do not hv conceptual nd fundamentalistic knowledge of SAP BW authorizations and its structure . Plz send a good document for learning BW authorizations .............................it may be an excerpt frm FU&FU guide. My Email Id is [email protected]
    A short but complete SAP BW fundamentalistic , concepts and structure & hierarchy covering document is appreciated.
    Requested to revert at earliest as this is very urgent.
    Points guaranteed.
    Regards,
    Somya

    Hi maheshwari ,
    Use these steps for authorizations,
    1.before going to authorizations u have to decide on which Infoobject u have to apply authorizations.
    EX: SD--- Sales Org, MM -> palnt ,purorg,FI> companycode.
    first u ahve to decide which area & on which Infoobject.
    2.goto that Infoobject --> change there check the checkbox Authorization relavent object cahechbox
    2.after that U Have to goto RSSM there u have to create authorization object
    Ex: Zxxx ( XXX is Infoobject Name ).
    3. In the same transaction Screen u have Infocube selection radio Button check that then select on which cube(cube means under that cube all Quaries) u have to make authorization for that perticuler Infoobject.
    4.next goto PFCG create role & save it
    5.goto Authorization tab in that selct edit authorization it will give automatiaclly authorization Templates in that u have to select only S_RS_RREPU & press Enter.
    6. Select manual pushbutton it will ask authorisation object enter ur authorization object what u have created ( zxxx) .
    7.click generate +enter
    8. goto user tab Enter userId+enter + click on usercomparision+ enter
    9.save the role.
    FOR HIRARCHIES:
    1. goto RSSM There u have one rediobutton called authorization hierarchy ( this radio button is very below the RSSM screen)
    2. there u have to select Hierachy on which u have to apply authorization.
    Thanks,
    kiran

Maybe you are looking for

  • Single user mode session lost after backgound processes jump in

    We have an application running on SQL server. This application restores DB very frequently using Single user mode. Following are the SQLs that are executed to restore the database in single user mode and to get the database back in multi user mode. a

  • How to Restore Windows 8 if System Crashes

    Okay I purchased three HP Pavilions (1 last month two last year) from Best Buy.  They did not come with Windows 8.1 Recovery Disk.  So how can I restore Windows 8.1 if my disk crashes?  How can I get the media and the product key for Win 8.1 for my s

  • Alt codes not working

    I am trying to use alt codes to input spanish and portuguese characters. My laptop has a keypad so I am pressing ALT+!164, for example, but none of the codes works. What could I do to solve this? Thanks!

  • SQL Server 2008 R2 Installation Media Root Directory location for XP SP3?

    Where is the SQL Server 2008 R2 Installation Media director?  This question asks during a 'new installation or add features to an existing installation'.  The installation media root directory is not indicated under 'options'.  I trying side-by-side

  • Any solution to call Bridge JS functions from AppleScript

    I´ve got AppleScript which is controlling Extensis Portfolio 8 and InDesign CS2. I´d like to call Bridge and change the color of the label of active document . Does anyone know any method to do this? Portfolio does not support JS and it seems to me a