Learning PCR and Workflow
Hello,
I am basically a Webdynpro for Java guy and want to learn Workflow and PCR for MSS and want to know whether I need to learn ABAP first....if then what is the level I need to dig in ...and how should I start..?
Any help would be highly appreciated.
Hi,
You need atleast a little ABAP knowledge to work on the workflows.
To start -->
1. Search in SDN Library. There are many good docs on PCRs.
2. In SAP Insider there was a document submitted by Alan Rickayzen on PCRs. This will give brief overview on PCRs and its uses.
3. Search this forums for posts on PCRs (especially the replies by Jocelyn Dart and Rajasekar).
Thanks,
Prasath N
Similar Messages
-
Hi All,
I am excited to learn PCRS and schemas .., i have help documentation with me.
But no idea how and where to start.
Appreciate for the right advice.Hi Raja
Check out links
http://www.sd-solutions.com/documents/SDS_Payroll_Schemas.html
http://www.insightcp.com/research.htm.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d51e68575e11d189270000e8322f96/frameset.htm
I hope these will help you.
---Bob Radi -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
Lightroom Metadata editing and workflow is tedious nightmare!
I'm new to Lightroom in just the past month, but have used it enough to see that a serious interface problem makes Lightroom version 1x virtually unusable in a deadline-oriented publishing workflow. Lightroom's Metadata editing and workflow is just a terrible nightmare, and far too tedious and slow. It appears to be an afterthought implemented by good-hearted souls who've never had to edit this sort of information under serious deadline pressures. I know Lightroom is marketed as an image database and not a file browser, but we're all looking to simplify our workflow here and with just a few subtle enhancements, Lightroom could be an excellent file browser and file import manager too.
As it is now, the Lightroom v1x handling of File Naming and Renaming, Metadata Editing and Keyword Editing is poorly implemented and in need of an immediate overhaul to help professional photographers expedite this crucial and time-consuming first step in the archiving workflow. While Lightroom is very good at many other tasks, I give it a big fat "F" of a failing grade for these tasks.
First, the Lightroom Library Module needs an even more simple, linear interface that steps users through a precise procedures (and helps them remember them). Arguably, to accomplish this, the Import function may need to become a separate Module that can be selected and used separately before entering the Library. As File Naming and Renaming, Metadata Editing and Keyword Editing currently are implemented, I, for one, am always forgetting to fill out one of these critical sections and can't even seem to remember that some may need to be done before importing while others appear to be conceived to be done after importing. My point is, all these related steps really need to be done together, but the Interface spreads out the functions too much, and it is nearly impossible to build a logical and linear Import workflow, especially when you are first learning Lightroom.
I'd like to see a workflow that walks me through applying and editing (in order), File Naming, Basic and IPTC Metadata, Captioning and Keywords, so that I don't always forget some obscure step in the process (which I keep doing). Here are some specific suggestions, some of which may prove to be valid, some of which may be problems due to my lack of experience with thye software.
1. As currently implemented, Metadata editing requires too much thought, and does not have enough intelligent automation. Eliminate as much typing as possible (See Photo Mechanic!)
2. Lightroom needs better Metadata Presets. A "Quick Edit" view to simplify interface for editing minimal metadata info (File Name, Basic Info, Keywords, Headline, Limited Copyright Info).
3. Separating Keyword Tags, Metadata Browser, Keywording Presets and Metadata Presets confuses the workflow. They should all appear together under one selectable module that organizes a suggested, linear workflowfor these tasks, but allows it to be customized. This is the sort of tasks that need to be learned by rote memory, and having all these panes floating around on both sides of the photo make it impossible to quickly step through these tasks.
- Name (or Rename) files, Edit/Apply Basic and IPTC Metadata, Edit/Apply Keywords, Import or...
- Import, Name (or Rename) files, Edit/Apply Basic and IPTC Metadata, Edit/Apply Keywords, Import
4. Rename should offer the option of renaming the master file names on the disk, not just file names in the database (which I think is what Lightroom does, but again, this is very confusing for new users)! So, it is my belief that this feature needs a checkbox option to rename one, the other or both. But you need to be able to quickly find this dialog box every time you do an import, and it should not be hidden away out of view under the Library menu. Ideally and logically (for workflow), File Renaming should be handled when starting the Import into Lightroom.
This is critically important because many userLightroom metadata editing Part 2 (see Part 1 at top of thread)...
...This is critically important because many users just do not want to trust their images solely to any database and we want the ability to go look for master files with identical names should something go wrong with the software or we decide to edit the file in Photoshop outside of Lightroom or even switch to another library software program.
My own habit is to rename every file with the date followed by a unique, three-digit file number, as in 20070717_001, 20070717_002...up to 999 etc. (I have never shot more than 999 files in a single day, but this could be a four-digit number). To file these on disk, a folder with a similar naming scheme is created for each day's shoot, although a keyword slug is added to the end instead of file numbers.
5. Metadata Presets (Basic Info, IPTC metadata, EXIF metadata), Keywords need to be able to toggled on or off (promote/demote-expand/contract). Turning Off/On one section at a time via the Metadata Presets popup menu is too tedious...and you can't display IPTC and Large Caption together or leave Large Caption turned on. It also is difficult to remember where the Large Caption default (Preferences) setting is...
6. Please get the EXIF data out of the way entirely when editing captions and visa-versa...And the EXIF data should not separate Basic Info and IPTC Info fields. Please relocate the EXIF to the bottom of the Metadata pane...
7. IPTC Content, IPTC Copyright, IPTC Creator, IPTC Image expand/collapse sections need more automation:
- The Presets fields need Preset lists of entry choices for cities, states, countries, etc.!
- ISO Country Code automatically should be filled in when a country is entered.
- Date created automatically should be filled in from camera EXIF data
- Metadata Presets "Save As" should fill in old name, and allow you to rename it; (When it appears, the new name field should not be empty. This would aid in consistent, alphabetical naming
- Metadata Presets naming should support job names, with actual Presets saved under each job name...
8. IPTC Status EXIF, Contact, etc.
- Caption field MUST display more than one line...(6-8 lines)!
- Caption field MUST support Shift/Return!
- Headline (IPTC Content) should be displayed with (and above) caption. Please present information logically!
- Yellow popups should describe what each field name is for...some are real brain teasers... -
Unable to check-in, check-out and workflow videos in an Asset Library
Hi All,
This may seem like a silly question but I have yet to find anything official about why you cannot check in/out video files in an Asset Library or workflow them. We have an approval workflow in our publishing environment which works great and I'm able to
check in/out and workflow images and even documents in an Asset Library but not Videos. We want videos to go through an approval process as well and I'm not talking about simple Content Approval, we want it to go through an approval workflow but check in/out
is grayed out/disabled and of course we can't workflow the videos.
I take it there must be some reason for this but I haven't been able to find an explanation. Any info you can provide me was to why this functionality is disabled would be appreciated.
Kind regards,
LisaHi Lisa, it appears to me that Video content type do not have checkIn/Out feature as it derived from folder CT. You can use document library to upload video using document content type and then checkIn/CheckOut. Hope this helps.
[email protected] -
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein -
Assigning learners to Learner Group and creation of Learner Group.
Hi All,
Are there any standard ways to create Learner Groups from R12.1.3. I have tried looking for Oracle standard APIs but did not find them. Is there any other way we can create Learner group from back end. I know to create them from Application but we have to create bulk number of Learner Groups. So wanted to do them from back end.
Also we may need to assign large number of learners to learner group. Can you please explain the possible ways of doing these assignments.
Any inputs are the most awaited.
Thanks,
Abhishek.Thanks Anders for your input. Please look into my below query also.
We are in 12.1.3. I tested creating a learner group and adding learners to it (both by organization and learner assignment).
When I try to assign a course to a Learner Group from the Application, I go to course and from "Bulk Enroll" window, I input the Learner Group to which I wanted to add the course and click on 'GO'. Now Application lists out the learners in the Learner Group. Learners in the Learner Group are not enrolled into courses unless I click the check box beside each learner and select 'Add'.
Is this the standard way of enrolling a Learner Group to the course. I am just looking for a way where I can enroll all the learners in Learner Group to a course by selecting that particular Learner Group (rather than clicking the check box beside every learner).
If I have to check against every learner to enroll them in a course, then I dont really get the point in creating Learner Groups. Please advice.
Thanks,
Abhishek -
Output post processors and workflow engines doesn't come up after cloning
ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4J
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issues
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
At this point, adcfgclone did finally complete successfully! Also adautocfg is now completing successfully!
Some references:
http://www.usn-it.de/index.php/2009/02/20/oracle-11g-jdbc-driver-hangs-blocked-by-devrandom-entropy-pool-empty/
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) (Doc ID 1066312.1)
Look for a section titled, “Attention: JDBC connections may time out during the upgrade process when random number generation is slow on machines with inadequate entropy.”
Can some one help me on this.ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4JPlease post the details of the application release, database version and OS.
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issuesWhat is the error from the Workflow and OPP log files?
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.If you are on R12, please see these docs (search for "Djava.security.egd").
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) [ID 1066312.1]
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
Can some one help me on this.Are you trying to avoid manual changes? If yes, please make sure you have all the patches mentioned in the docs referenced above applied and you have all the necessary configuration/setup.
Thanks,
Hussein -
Difference between Business Process and Workflow
Hi all,
What is the difference between Business Process and Workflow? i have googled it and I don't really understand that complicated definition? Is there any examples to illustrate the difference between the both?Hi,
I will try to put here , my perspective of this. If somebody knows better, they can update further on this.
Business process is purely on the perspective of the users. It may or maynot have anything to do with the system. When a draw a business flow diagram, we dont take care of how each and every process is handled in the system. The best illustration is an example of authorisation.
Let me say that I create a Purchase requisition. Once it is released a PO will be created by procurement managerD
This is a business process. However if we look at the system perspective, it can be like this.
1. Create a PR.
2. Check the value of the PR
3. If value <$100,an email needs to be send to person A, if it is $100 to 300$, an email should be send to person B and if >$300, an email should be send to B and C.
4.Once it is released, an email shoudl be send to D for creating a PO on this PR.
Here not only the process, but also how the work is delegated across various entities of the process is mentioned.
There are softwards like VISIO which actually take care of the business process in the perspective of the entities involved in the process. A workflow is a moredetailed version of business process with the roles of entities clearly defined and hence configured well in the system.
The concept is workflow is mostly used in the processes of authorisations, business activity monitoring(BAM), etc.
Hope I make it little clear to you.
You can reward if my response is of some help to you -
I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?
Go back to the editor and close the photo there.
-
Digital Signature and workflow functionality in Enh Pack
We are working in ECC 6.0 environment. Recentaly we have activated Enh Pack 3 and 4 in our system. After that I can couple of additional QM functionality in system. SAP has provided few more settings in SPRO to activate digital signature in QN and workflow in standard peace.
I would be wonder if anyone has used those function in standard system without any custom development.
How can we use/ activate those (digital signature for QN and workflow) functionality? Reply appreciated.SAP IMG > Quality Management> Quality Notifications> Notification processing> Specify Digital Signature
Give details like
Level -Header /Task Notification Type
Business
Transaction
Signature Type
Strategy
Enter the Business Transaction: like PMM2 for Put notification in process,PMM4 for Complete notification, QN40 for Release Task etc
Depending on your configuration systems asks for digital signature when you set header level status or Task level status
Means if u set Digital signature for PMM2 for Put notification in process system prompts for Digital siganture.
Regards
Nitin -
Develop Form and Workflow in SharePoint Online and On-Premise
Hi Expert,
I have the question about Form and Workflow in SharePoint Online vs ShrePoint On-Premise
Current Problem : Customer is implemented Form and Workflow in SharePoint Online but they have a problem some features that didn’t work in SharePoint Online. I will have a meeting to discuss Do and Don’t Form and Workflow in SharePoint Online compare SharePoint
On-Premise.
Please suggestion.
Thank youHi MasterBird,
There is no documentation to explain the difference of the custom form and workflow between SharePoint Online and SharePoint On-Premise. For your issue, you can have a look at the following blog:
http://www.techrepublic.com/blog/the-enterprise-cloud/get-infopath-forms-and-sharepoint-online-with-office-365/
https://support.office.com/en-us/article/Office-365-known-issues-6b380978-84ce-49af-be5d-f7cda0fe28f9?ui=en-US&rs=en-US&ad=US#__sharepoint_online_preview
https://support.office.com/en-in/article/Configure-InfoPath-Forms-Services-a8609546-c0d7-4956-81b6-08e93eb4b290?ui=en-US&rs=en-IN&ad=IN
http://blog.sharepointlearn.com/2011/11/03/sharepoint-in-office-365-the-good-the-bad-the-brilliant-and-the-ugly/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Form and Workflow in SharePoint Online vs SharePoint On-Premise
Hi Expert,
I have the question about Form and Workflow in SharePoint Online vs ShrePoint On-Premise
Current Problem : Customer is implemented Form and Workflow in SharePoint Online but they have a problem some features that didn’t work in SharePoint Online. I will have a meeting to discuss Do and Don’t Form and Workflow in SharePoint Online compare SharePoint
On-Premise.
Please suggestion.
Thank youHi MasterBird,
For SharePoint 2013 On-premise, we can :
Comlete control of our environment and data
Supports heavy customization
Keep sensitive information in-house
Easier integration into line of business systems
Full development options for developers
For SharePoint Online workflow:
Workflow 2010 & 2013 are available with Standard and Enterprise Editions without having to install
If using Windows Azure workflow functionality is the same as 2013
Cannot create custom Visual Studio workflows
For InfoPath Form Services you will need Office 365 Enterprise Could Edition or SharePoint Online Plan 2
More information, please refer to the video:
http://www.youtube.com/watch?v=eNtCH3qOk2g
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Hi All,
I have a situation, SPEmailEventReceiver and WorkFlow is attached to same library, WorkFlow is configured to run after item is updated, but soon as the email is received in library the workflow
is getting triggered, We have a action to create folder with subject and date and put the attachment with the date folder in SPEmailEventReceiver e.g: once a mail is received in library the SPEmailEventReceiver will create a folder with Subject and then Folder
with Date and then put the attachment in the date folder so hierarchy will be subject folder/Date folder/attachment
I have tried to alter the SquenceNumber attribute in Feature Element file to 1 and make the Synchronization as synchronous but no luck.Hi,
Here are some articles for your reference:
Programmatically creating Folders within SharePoint List
http://www.mindfiresolutions.com/Programmatically-creating-Folders-within-SharePoint-List-487.php
How to use SPEmailEventReceiver?
http://kkryczka.wordpress.com/2010/11/05/how-to-use-spemaileventreceiver/
Attachments disappear with custom email event handler
http://blogs.msdn.com/b/malag/archive/2009/05/13/attachments-disappear-with-custom-email-event-handler.aspx?PageIndex=2
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.
That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.
Maybe you are looking for
-
... how do i turn off my 4G in my i phone 5 ? ...
i am a i phone 5 user , and i am not sure how to turn off the 4G in my phone... can anyone teach me how to do it ? thnx 4 ur help
-
Is there any way to display filenames or captions for photos?
is there any way to display filenames or captions for photos?
-
UPGRADE 4.6C to ECC 6.0 is done / how could I Start the Unicode
HI Guys, we upgraded successfully our 4.6 C (MDMP) to ECC 6.0 (<b>NON Unicode</b>). Could you please say if I had this understand right: if I would like to start now the unicode conversion, I need this DVD "SAP NetWeaver 2004s Installation Export DV
-
I've installed Intermedia text. During sample index creation i've get following error messages: ORA-06520: PL/SQL: Error loading external library ORA-06522: Unable to load DLL ORA-06512: at "CTXSYS.DRUE", line 126 ORA-06512: at "CTXSYS.TEXTINDEXMETHO
-
How to close sub-application without close main-application?
My main application has a menu which is used to open sub-application window. When I want to close the sub-application, I do not want to use System.exit(0), because it will close the main-application too. And if I use setVisible(false), the sub-applic