Lease help me asap!
i purchased a blackberry curve 9360 on august 8th brand new from bell and after approximately 10 days it quit turning on and doesnt respond if its plugged in or anything.
Today i plugged it into my computer and now the red LED light turns on, but so far thats it. it still wont turn on, anyone know what i can do to fix this problem?
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Help needed asap! I want to buy an IPAD 3G + Wifi before I return to my country from the US. The problem is that I have GSM service providers in my country that provide 3G services but I am wondering if their SIM card would work in the IPAD? In other words, can I get an unlocked IPAD 3G wifi? Thanks for helping out
The AT&T 3G iPads (which are GSM/sim based) in the US are not locked (the Verizon models are CDMA based so they effectively are). So as long as you can get a sim in your own country you shouldn't have a problem
-
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
-
We are not able to execute below procedure, plz help me ASAP.
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
HTML not working in PL/SQL block..Help me ASAP
declare
l_col VARCHAR2(30) :=to_number(to_char(to_date('01-feb-2011','dd-mon-yyyy'),'dd'));
CURSOR name_cur IS
select name
from od_shift_schedule
where year=2011
and (month)=('Feb')
and decode(l_col,1,"01",2,"02",3,"03",4,"04",5,"05",6,"06",7,
"07",8,"08",9,"09",10,"10",11,"11",12,"12",13,"13",14,"14",15,"15",16,"16",17,"17",18,"18",19,"19",20,"20",
21,"21",22,"22",23,"23",24,"24",25,"25",26,"26",
27,"27",28,"28",29,"29",30,"30",31,"31")='W';
BEGIN
DELETE FROM nam;
commit;
FOR i IN name_cur
LOOP
dbms_output.put_line(i.name);
htp.p('<b>Employee '||i.name||' has been ticked.
</b><br/>');
EXECUTE IMMEDIATE 'insert into nam(name) values('''||i.name||''')';
commit;
END LOOP;
end;Kindly help me with this
If i'm wrong here kindly help me that how can i place a display messageRe: HTML not working in PL/SQL block..Help me ASAP
Using the community discussion forums for urgent issues is rude and a violation of the terms and conditions.
http://www.oracle.com/html/terms.html
>
4. Use of Community Services
Community Services are provided as a convenience to users and Oracle is not obligated to provide any technical support for, or participate in, Community Services. While Community Services may include information regarding Oracle products and services, including information from Oracle employees, they are not an official customer support channel for Oracle.
You may use Community Services subject to the following: (a) Community Services may be used solely for your personal, informational, noncommercial purposes; (b) Content provided on or through Community Services may not be redistributed; and (c) personal data about other users may not be stored or collected except where expressly authorized by Oracle
>
Also please read the FAQ on how to ask questions.
SQL and PL/SQL FAQ
>
2) Thread Subject line
Give your thread a meaningful subject, not just "help please", "Query help" or "SQL". This is the SQL and PL/SQL forum. We know your question is going to be about those things, make it meaningful to the type of question so that people with the right sort of knowledge can pick it up and those without can ignore it. Never, EVER, mark your subject as "URGENT" or "ASAP"; this forum is manned by volunteers giving their own time to help and your question is never urgent or more important than their own work or than other people's questions. It may be urgent to you, but that's not forum members issue. -
HT6154 can some one please help me ASAP
can some one please help me ASAP
I went to my settings then general and restored my Iphone to factory default and its been stuck on the loading screen for more than an hour and I don't know what to doConnect iPhone in newest iTunes and Hit Restore
-
ABAP QUERY REPORT : please help me ASAP.
hi friends,
I need to change the existing custom abap query.
1) I need to add two more fields on selection screen. I have added using INFOSET and checked the input and output check boxes.
But the text of the one field should be different from standard tetx.
"Reference date" to be changed to "Dairy date".
I have changed in Infosets. updated text is displaying as "Dairy date" in the out put LIST, but standard text (Reference date) is appearing on the selection screen.
I need it to be displaed as "Dairy date"
2)The column "Dairy" date is adding as the last column in the list after executing the query. But I need it to be displayed at 8th column.
Please help me ASAP.hi Eric,
Could you please explain in detail.
1)I HAVE CHANGED THE NAME IN iNFOSET, FIELD GROUP.
IT IS NOT REFLECTING IN SELECTION SCREEN. ONLY REFLECTING IN THE OUT PUT.
2) I have tried by changing the sort sequence number. but still it is displaying at the end of the columns.
please explain in detail. -
Hi,
I have a friend of mine his name is Atul Tembe he has a functional expereince of 10 years in sales with L.I.C and he has done SAP SD Certification in the month of November, from Genovate Mumbai he has still not got placed and he is lookin for his first SAP Break. He is a Bcom and a P.G.D.B.A. Would request all of you to kindly help him out please. His e-mail id is [email protected] .If he gets a good break would reward with points do pls help. Pls mark a cc to me too my e-mail id is [email protected]
Regards
Atul KeshavIt is being mentioned over and over in this forum that this is not the place to place job openings or requests for jobs opportunities. This is the forum for knowledge sharing in SAP.
With the tag line <b>"Help Required ASAP"</b>, you are wasting the time of people who genuinely like to help others who are in need of serious help with SAP Project issues.
Please desist from posting this kind of things and also irrelevant tag lines.
Ayub Khan -
hello.... I cannot sign in to creative cloud.. I have tried everything and i mean everyting possible i could find! I deleted the olb file, i have deleted the application and everything with it and nothing is working! I really need some help here ASAP thanks..
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys
- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again. -
Error messages help need asap!!!!
hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1 PL/SQL: SQL Statement ignored
13/27 PL/SQL: ORA-00933: SQL command not properly endedHi,
Welcome to the forum!
Don't say things like "urgent" or "asap" (as in your title, "error messages help need asap!!!!"). It's rude.
971848 wrote:
hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1 PL/SQL: SQL Statement ignored
13/27 PL/SQL: ORA-00933: SQL command not properly endedIt looks like you're missing a semicolon at the end of line 13; that's why the statement beginning at line 8 can't be understood.
Also, you store a number in my_val, but never use that number, and you have a variable called tasktotal that's never defined. Should my_val and tasktotal be the same variable?
Perhaps this is what you want:
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
tasktotal NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO tasktotal
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id; -- ; at end is important
RETURN tasktotal;
END;
/This question doesn't have anything to do with SQL*Plus, so maybe the SQL*Plus forum isn't the best place for it. This is strictly a PL/SQL problem; in the future, post questions like this in the PL/SQL. The FAQ page for that forum, {message:id=9360002} , can really help you. -
Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.
Here:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad -
i was trying to play a game on my ipod touch but then my whole ipod screen was fully white can anyone help me ASAP PLZ
See the section titled "Display shows white screen" in this support article:
http://support.apple.com/kb/TS2771 -
i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!
Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked
-
I just got a 120 GB ipod classsic and it wont appear in my itunes source list and it appears in my computer.I have tired the 5 R's already.But a pop-up appears and says windows times out and i need to have my ipod for today.PLEASE HELP ME ASAP
if you have just got it most places give ipods a 1year garuntee so take it back to the shop to have it looked at pls put this as correct answer
Maybe you are looking for
-
Transaction code for Seeing No of users working in a particular client?
Hi Guys, When i am debugging the program i go struck some where and the program is not coming out of debugging mode.So i pressed Ctrl Alt Del and closed that screen.I freshly my program in same client but iwas not able change the progr
-
Trigger a Workflow when a date is reached in SharePoint Online
I have created a simple list workflow (SharePoint Online) which emails a user, informing them a Document's Target Closure Date has been reached. The workflow works fine when started manually. I want to trigger the workflow only when Target Closure Da
-
4.2.1 Bug: Current values of child cascading LOVs are LOST.
Hello, ApEx Team! This bug affected 4.1.1 and 4.2.1 but with different behavior. It seems that someone was trying to fix it. According to docs "whats new in 4.1" a value of refreshed child cascading lov is derived from default value settings of selec
-
Current version of CS6/ACR with the perpetual license
First of all, where can I find the list of forum discussions? All I have been able to see is a list of questions. I'd like to know where this post ends up so I can monitor the answers if any. Regarding my current version of CS6/ACR (version 7?), how
-
Having problem adding page #s consecutively in header!!!
I am doing my paper, and I have to do a header on every page which I am to do, but I have to have page #s starting at 1 numerically going in order, but it keeps saying 1 on every page, what do I do? I am doing this in pages.