Leave Quota generation with diifferent rules for different countries

Hi,
I have the following requirement need help in achieving this.
Employers must grant 10 days paid leave to employees that worked for six consecutive months from the time of hiring and who worked on not less than 80 per cent of all schedule work days. This paid leave may be taken consecutively or separately. Where an employee's application to take paid leave will hinder the normal business operations, the employer may require the employee to take such paid leave at a different time.
The number of days of paid leave available to employees increases in proportion to employees' length of service as set forth in the below table.
Years of Service  0.5  1.5  2.5  3.5   4.5   5.5   6.5+
Paid Holidays         10    11  12   14    16    18    20
The right to annual paid leave expires after two years. In other words, annual paid leave left over from one year may be carried over and taken the next year only. For example, if an employee is awarded 10 days paid leave after their first 6 months of employment; those paid holidays will become invalid after 2.5 years of employment. Use them or lose them.
Simply put, holidays from one year can be carried over to the next year, but not to the third year. So, if you don't take your leave from one particular year within 12 months of that year ending, you will lose that first year's allowance.
Employee can take leave encashment of holiday leave only when leaving their employer. It is not legal for companies to buy up the holiday leave of those still working for the firm.
In my organization one PSG grouping has been used for all countries, it wont be possible to change the grouping now. In such a case how can we provide different rule for different country without customizing the Leave module.
Do we have to use any PCR for this, if yes which??
Regards,
Jailakshmi
Edited by: Jailakshmi on Aug 3, 2011 7:16 AM

Hi,
Use QUOMO Feature to give different entitilement to employees.
Leave entitlement as per seniority can be configured in base entitlement.
Keep validity and deduction period for 2 years by using :Relative postion" option in validity and deduction period table.
Rgds,
Lata
Rgds,

Similar Messages

  • [SOLVED] how to use diffrent iptables rules for different ppp account?

    x86 plantform run arch linux system , have two network interface etn1 eth0 .eth1 connect to internet. eth0 connect to other terminals through switch. want use different iptables rules for different pppoe account .also want to know how to forbidden more than one terminals established pppoe link use same account at the same time .
    Last edited by linuxsir (2013-09-26 06:48:01)

    (You establish PPPoE sessions over the local network to the Arch machine? Which then routes the traffic?)
    first question ,yes that is exactly what i am done. second question i also have a small  scripts on windows pc to solve routes traffic problem
    route -p delete 0.0.0.0
    route -p add 192.168.9.0 mask 255.255.255.0 192.168.9.1
    route -p add 0.0.0.0 mask 0.0.0.0 192.168.22.0
    but after a while i found scripts is not necessary because windows always attempt to use PPPoE sessions as default internet connection local connection is also ok
    and use  -i pppX in my iptables rules dose not  solve my problem , because same account start PPPoE session could be marked as ppp0 or ppp1. it is hard to identified which account start session.

  • Something interesting with check rule for VAT registration no.

    Hi Guys,
    I found something weird in sap with check rule for VAT registration no.
    If I set any of check rules for US and save(tcode oy17), then change the country of a customer from DE to US and save(not change the VAT registration no), the system post error messages "ISO code DE is not correct in the VAT registration number". But if I set rule for AU(australia) with same rule as US, and change the customer's country from DE to AU(not change the VAT no), no error happens and customer can be saved successfully. So anybody can give any explanation on this problem?
    Thanks in advance, point will be rewared. Waiting for the comments.
    Regards,
    Alex

    <TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%"><tr><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=add2d1.jpg" name="add_QTB_5174" id="add_QTB_5174" onclick="javascript:addRowToTable('QTB_5174',4,22.5);return false;"/></td><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=delete2d.gif" alt="delete" name="delete_QTB_5174" id="delete_QTB_5174" onclick="javascript:removeRowFromTable('QTB_5174');return false;"/></td><td><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=edit2d.jpg" alt="edit" name="edit_QTB_5174" id="edit_QTB_5174" onclick="javascript:updateTableRow('QTB_5174',22.5);return false;"/></td></tr></table>
    <input type="hidden" value="QTB_5174" id="5174"><TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%" id="QTB_5174" name="QTB_5174">
    this a sample code. I have marked the name attrib in bold.

  • Are iPads built with different configurations for different countries?

    Are iPads built with different configurations for different countries?

    deebeeque wrote:
    I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
    You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
    Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
    There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
    Additionally, does Brazil have 4G?
    I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

  • How can I update the apps. with the new iTune, that's really silly especially I have two iTune account for different countries

    I used 2 iPhones and a iPad, 2 Apple ID for different countries so that I can download apps. from different country.  Its a pain and sometimes no possible to update the apps. on the ISO devices.  Apple really needs to fix this aspect.  Also the new iTunes is so difficult to use, please bring back the old one.

    When Itunes opens
    1) Click on drop dow list button top left under the player controls
    2) Select Apps
    3) At the bottom right there are two buttons, Check for updates and Get More Apps
    An Alternative is when iTunes opens in the top menu Click on View, Show Sidebar. Then you will see your apps page as in itunes 10. Click on that option and as before you should have two buttons, Check for updates and Get More Apps.
    NB this is all within Itunes NOT the iTunes Store

  • Cost of Spotify Premium for different countries in relation to USD.

    Cost of Spotify Premium for different countries converted to USD.
    Australian dollar $11.99  = $12.5
    Euro 9.99€  = $12.5
    Swiss franc 12.95 = $13.5
    Swedish kronor 99 =  $15
    British pound 9.99 = $15.8
    Danish krone 99 = $16.64
    Norwegian krone 99 = $17
    Price for Spotify premium in the US: $9.99
    I could come up with several different reasons why this is how it is, however I would like someone who actually works at spotify to state the reasons why the price for spotify premium differs so much between countries. And why it would be cheapest in the USA.
    Thank you.
    Tvspotify1

    Yes, but when you're buying a jacket.. or a DVD (a lot of jurisdictions, it's not illegal to have a region free player, only to circumvent copy protection - copy protection and region locking being distinct concepts that often vendors will attempt to intertwine but are distinct as aims).. or a CD, you can import it from that cheaper market - in some cases still cheaper with shipping than if you bought it locally even factoring in local consumption taxes. Sure, it might have some different promotional tracks, or different "extra features", or different language options in the subtitles... but the core content's generally going to be the same.
    Case in point. I have an Android phone. I needed an MHL adaptor. I checked local retailer ... $40AUD
    I checked a retailer online.. $30AUD - shipped..
    It took a week to arrive, but arrive it did.
    With digitally distributed, geo-IP locked content - you lose that ability to shop across markets. To me, it sends the wrong signals to charge one group of people one price, and another group of people another price for the mostly the same content when it's available on the same global network. In essence, you're punishing people who you're trying to ween off the "internet is free" mentality into the world of subscriptions and micropayments.
    Don't get me wrong, I don't hate spotify in and of itself - I've been using it a lot at work of late and a lot of friends, both in Australia and internationally have given it a go. It's totally awesome to be able to hear something on the radio or in a movie or on TV.. tag it with Shazam or Google Music Search.. and then to key it into Spotify and hear it play on demand. It's also totally awesome that there's a linux client available - which although in alpha - works.. stably.. (one reason you'll never find me buying an Apple product is the whole 'thalt shall use iTunes' mantra)... and ok, maybe I'm not your average consumer (running Linux on the desktop, stock Android on my phone with root access, bearded and a system administrator - living stereotype much?).. but I'm interested in doing the right thing, and I know content has to move to pay with advertising revenues falling and content, well, more generally intellectual property, increasingly becoming a new and renewable commodity in a world where consumption of physical resources needs to be curtailed.
    I know the local record companies probably play into the mix.. and that by taking a segmented market approach as opposed to a global market approach, there's probably a certain "flagfall" cost in smaller markets that means a higher cost as the smaller markets won't be able to match the economies of scale that would enable larger markets to charge a lower price per user but still make more by having more room to play with the margins. I guess it just grinds my gears that the price for the same 1s and 0s is higher.
    I guess we'll see what happens if/when spotify considers mobile provider partnerships (especially in countries like Australia where unlimited data often has many asterisks/T&Cs, doesn't exist or costs a lot), and if the AUD should fall against the USD (we're holding above parity for awhile now)... if the price will rise then or hold?
    I'll probably succumb when my advertising supported listening is cut back to 2.5 hours a week if I'm still working in a business that allows employees to stream :) .. I guess it's just being so familiar with what the currency's doing and initially being very interested in mobile streaming - and having heard things on US sites talking about the price - to find out, "no, you actually pay more".. well.. it kinda dulled the shine a bit.
    I hope you find my post (although perhaps a bit long winded) polite. I believe such conversations are always best dealt with in an even tone.. and again FWIW, I do thoroughly enjoy and congratulate you on providing a working linux client... and in an apt repository at that!

  • HR CEE add-ons for different countries in one system

    Hello,
    is it possible to have HR CEE add-ons for different countries in one system?
    Will SAP system work properly? What kind of risks of these imports?
    Thank you very much.

    A couple of generic answers on add-ons
    - of course you can have several add-ons working on the same B1. To understand
    the details on how add-ons are started and maintained by B1 desktop pls refer
    to the e-learning available here on SDN
    - compatibility of add-ons. There is no generic answer to this, it depends on the
    functionality and implementation of the two add-ons. Anyway, if two add-ons are
    functionally independent and they follow the solution guidelines, then they should
    be interoperable. You can find the solution certification guidelines here on SDN
    under the ICC section: these rules cover points like namespaces, event handling,
    user table and form creation and so on that enforce interoperability.

  • Handling address related information for different countries

    Hi,
    We are trying to understand the best way to display / query address related information (while designing internationalization for our application) - from users based on their locale - for example we would need to ask zip code - if the user is in US, in UK it would be postal code , there would be counties in UK but not in India etc . Is there some guideline / frame work for designing address related forms for international applications?
    Thanks in Advance for your help !!

    The problem is that you need different pieces of information for different countries, and they need to be in a different order. Some information is required for some countries, some information does not exist for some countries, and the content for certain pieces of information is different for some countries.
    If you are not going to do any kind of verification of the information (zip code, for instance), and also not check whether the field is filled in at all, then it doesn't matter if you have separate fields.
    There are 3 choices:
    1. Implement correct addresses for every single country in the world
    2. Implement correct addresses for a few select countries, and then state clearly that you only support those countries
    3. Treat an address as a single piece of information
    Good luck with #1.

  • Address for different countries

    Hello friends,
    I need to create the same sales orders for various countries. so in the shipping address, i need to know which fields are manadatory for address.
    How can I find out which name and address fields(first name, title, postal code etc) are mandatory for different countries?
    Thanks for your help.

    Address Number is important.
    Then U use FM 'SD_ADDRESS_GET'. u can get the adress. in this u have to pass the Language.
    get the address number from VBPA for partner function 'WE'.
      SELECT SINGLE * FROM VBPA WHERE VBELN = VBDKR-VBELN
                                AND   PARVW = C_PARVW1. "WE
      IF SY-SUBRC = 0.
        V_KUNNR = VBPA-KUNNR.
      Get the Consignee's Address
        CALL FUNCTION 'SD_ADDRESS_GET'
                EXPORTING
                     FIF_ADDRESS_NUMBER      = VBPA-ADRNR "Address number
                FIF_PERSONAL_NUMBER     =
                FIF_ADDRESS_TYPE        =
                IMPORTING
                     FES_ADDRESS             = LVS_VBADR_CONSIGN
                EXCEPTIONS
                     ADDRESS_NOT_FOUND       = 1
                     ADDRESS_TYPE_NOT_EXISTS = 2
                     NO_PERSON_NUMBER        = 3
                     OTHERS                  = 4.
    - Selvapandian Arunachalam

  • HT2513 how do i delete events from my calendar for different countries anniversary days

    i need to delete public holidays from Ical for different countries without having to do each one individually

    It seems, as if me and my client have kind of the same issue. Any suggestions to this: I sent my client an invitation via my iCal from my iMac (using my yahoo calendar as the exchange server). My client accepted the invitation. Now I have deleted this appointment from my iCal and my yahoo calendar. But my client is not able to delete the appointment in his iPhone 4S. What can my client do?
    My client already went to the next apple store. There they told him to plug in his iPhone 4S to my iMac. Then he would be able to delete the appointment. Honestly, this does not make any sense to me. Why does my client have to come to me and plug in his iPhone into my iMac to get a meeting deleted. What if my client lived in a different country?????
    My client is really upset about this. Can anyone help me? Thanks in advance.

  • Actions for different countries

    Hi All,
    Can i know how to assign actions for different countries and how to maintian IGMOD feature.
    Regards,
    Evani

    Hi
    Your actions are mapped in the system referring to the User group and the reference user group.
    IF you maintain the user group you have no need to maintain the reference user group.
    If you use the reference user group then the user group is not considered for that action.
    R K

  • Advice needed for using date type in leave quota generation.

    Requirement:   Seniority for quota generation of long service leave must be based on date "02" in IT0041.
    Although all the relevant config has been done using the date type 02, the quota is still being generated based on date type 01. 
    My Question:  What is required to make this scenario work?
    Thanks
    Maureen.

    Validity/Deduction
    Validity:  Valid From = Date type 02 -1Days; Valid To =  Date Type 02 999Months
    Deduction: From = Start of Val +1Day, To =  End of Val +999 Months
    Base Entitlement:
    Rule: 002
    Sequence 001; Seniority = 0 - 5 years; Constant= 5 days; Related to = Accrual period
    Sequence 002; Seniority = 5 - 999 years; Constant=10 days; Related to = Accrual period
    Selection Rules:
    Applicability:  default values
    Accrual Period: Rel to date type = 02; Length = 60 Months
    Base Entitlement: Rule = 002; Key for seniority = For exact day
    Accrual Entitlement: No pro-rata calc
    Transfer time:  Upon accrual
    All fields not mentioned are standard defaults.
    Employee:
    IT0041
    Date Type 01 = 01/09/2005
    Date Type 02 = 06/04/1995
    IT0000
    Current position:  Begda: 01/02/2009 - 31/12/9999
    Previous position:  Begda: 01/03/2008 = 31/01/2009
    Testing by running Time Evaluation till 31/09/2012
    Result:
    5 days accrued on 05/04/2010
    IT2006:  Deduction from = 06/04/2009 To 31/12/9999;  Validity from = 05/04/2009 To 31/12/9999
    Please note I've used different dates in an attempt to clearly illustrate the problem. Hope it doesn't serve to confuse.
    Thanks for the help.

  • Absence quota generation with PCR in Time Evaluation

    Dear All,
    I am generation absence quota Annual leave = 50 through PT60- ZM04. Its daily calculation and transfered at the month end.
    The quota entitlement is 30 days per year.
    I have written this pcr. Have configured a time type too. but not sure why its not generating any quota.
    The time type I have configured is:
    Time Type: 0097
    Save as day balance - No Formation
    Save as period balance - 1
    Store for time accounts - 1
    Have assigned the time type 0097 in Base entitlement for Absence quota generation as Day Balance and even in generation rules.
    Have placed the PCR with ACTIO Z003 before CUMBT fucntion.
    The PCR Z003 is:
    000010 D HRS?0
    000020 *
    000030 = D OUTAQTYP
    000040 = **
    000050 = 50 Z GCY ZQTY
    PCR ZQTY is:
    000010 D OUTWPMOLGA
    000020 **
    000030 99 HRS=FR50C ADDDB0097Z ADDDB0097 HRS=D0097
    I didnt mention anywhere in configuration or PCR that its 30 days per year.
    Do I need to do this?
    Have I missed out anything, please help me.
    Thanks & regards,
    Majid

    Hi,
    This you can do through config also without using PCR.
    Base entitlement is 30 for calender year. Selection rule- Accrual period is daily and transfer time is time evaluation period.
    Use appropriate rounding rule in selection rule.
    Rgds,
    Lata

  • Leave quota generation

    Hi Gurus,
    please help me in solving the following issue.
    12 leave quota is generated for the employees after they  had completed  working for 240 days (weekly-off and Public holiday's are excluded) and after that every 12 days of working days he will get one additional leave.
    we are using both Positive and negative Time Evolution and no CATS is used.
    how to do the configuration for the above ..please help me out.
    Akhil

    Hi,
    You have to use Postive time evaluation .. and can maintain dates for IT 19  after 240 days after joining dates and that date types u can have in the generation of Quota..
    Regards,
    Kapil Kaushal

  • Substract as an aggregation rule for different level in a DIM ?!

    Hi there..
    I'm building a BI model based on financial transactions (incomes, expenses, etc..)
    and my main problem is how to substract a measure, where the aggregation rule is set to SUM, for different levels in the "Account" dimension?
    Example:
    I have the "Account" dimension with the following hierarchy:
    Account_ID / Account_name / Account_type / Account_total
    And, lets say, 2 rows in it:
    1.row in the "Account" dimension:
    account_ID : 100
    account_name : "Marketing expense"
    account_type : "Variable expenses"
    account_total : "Total profit" (total income - total Expenses)
    2. row in the "Account" dimension:
    account_ID : 200
    account_name : "Financial incomes"
    account_type : "Total incomes"
    account_total : "Total profit" (total income - total Expenses)
    "Total profit"
    "Tot. incomes" "Tot. Expenses"
    "Finan. incomes" "Market. expenses"
    The fact table has just one measure: "Amount" and, of course, some foreign keys:
    Account_ID -> "Account" dim
    Organization_ID -> "Organization" dim
    Date -> "Date" dim
    Amount
    The measure "Amount" in the fact table is positive both for expenses and incomes.
    Now, what I'm trying to do is to sum up that measure on my top level in the "Account" dim.
    At that level my report in Answers should substract "Total expenses" from "Total incomes"!
    How can I do that?
    thanks..
    Ivan

    Sorry to pop the obvious question, but can't you model that nicely and put it into distinct columns?
    If not, you can create derived measures on you fact using "case when" statements. One for the incomes with amount > 0 (or >=0 ...depends on where you want to have the 0's) and one for the expenses with amount < 0.
    HTH,
    Chris

Maybe you are looking for