Leave recorded to be reflected in SAP's appointment calendar

Hi,
May I know whether it is easily do-able to reflect the absence taken (in IT2001) and attendances (in IT2002) in the staff SAP's appointment calendar as well ? We will then sync. the SAP's appointment calendar to Outlook, which is a feature provided by Microsoft. We are not using Duet. Thanks.
Regards
Kir Chern

Hi if you book an employee for a trg prog. than its appears in the Appointment calendar the path is SPRO > training and event management> integration--> appointment calender.
i.e. the attendance for trg prog can be seen in Appointment calendar
it fetches the values from System table T77SO.. please look into this table ( all entires there are close to 900 entries in this table ) may be you will get your answer.
Warm rgds
vishal saxena

Similar Messages

  • ESS Leave Request - Error while creating a leave record

    Hi Friends,
      Some of the ESS leave request(not workflow) has gone into error when the system tryies to create a leave record in background. I can view these error request using the report RPTARQDBVIEW. This happens when the background program(PTARQPOST) tries to create a leave record. In some cases  the status of the leave request is set to error(the status attribute of the container element(Req) has the value Error),but we are not able to find what is actual error.Is there any log where we can check what is the problem? Please advice.

    May be
    Internally the pernr might not be locked or some one may be maintaing the pernr for whom you are trying to post.

  • If Time Recorder Enter Time Entry in SAP, Can It goes for approval on MSS ?

    Hi WF Experts,
    I would like to know, if  Time Recorder Enter Time Entry in SAP for group of employees, can it goes for approval on MSS for individual approval ?
    Would really appreciate your prompt response.
    Regards,
    Aashish

    Hi Experts,
    I got answer for it. I did it myself. It is possible.
    Thanks.
    Aashish

  • How the Forwording agents Quotation reflect in SAP with best Quotation?

    How the Forwording agents Quotation reflect in SAP ,The best quotation should be select among Forwording agents & the same should documented, how it is possible?
    Please explain it ?

    Hello Julian,
    in the procurement visibillity process such annulations are not handled. If you want to have them you could create new Event Types and send unexpected events to EM. Similar to what i described in your other post.
    On EM site you need a new multi task activity that reacts on these annulation event codes. To reset the reported event you can use activity:
    EE_RESET     Reset the Actual Dates and Status for an Expected Event     ACT_RESET_EE
    After the execution of this activity the event is reset from reported to expected.
    Best regards,
    Steffen

  • How-To allow records with Overlapping Time from SAP R/3

    Hi guys,
    Made reference to SAP Note 336229.
    Maintained my Transfer Rules of <b>Data Source 0HR_PA_PA_1</b> to <b>Info Source 0HR_PA_PA_1</b> and all is green! Unfortunately, still <b>NO</b> data and error IDOC message is " <i>The data request was a full update. In this case, the corresponding table in the source system does not contain any data</i>."
    "<i>The extractor of the DataSource reads the master data tables of the Employee (0EMPLOYEE) and person (0PERSON) InfoObjects and makes changes to these time-dependent attributes available as headcount changes</i>"...<b>says SAP</b>
    Info Object person (0PERSON) works!!!, however Info Object(0EMPLOYEE) is giving me problem whereby <b>in SAP R/3</b> Data Source (Employee - Education and Training) 0EMPLOYEE_0022_ATTR <u>allows</u> time overlapping of records, <b>BUT BW</b> generates an error " The time interval ['99991231'/'19930104'] & (from/to) for the data records 46 and 47 overlaps in characteristic 0EMPLOYEE "
    For example, lets assume there is Employee X with the following entry in SAP R/3.
    Begin Date||| End Date ||| SubType
    01.09.2003||| 01.09.2004||| Professional Cert.
    01.09.2003||| 01.09.2006||| Degree
    SAP R/3 allows this overlapping of time records however, BW does NOT. How can I tackle this overlapping issue in SAP BW?
    With much appreciation!

    Hi guys,
      Please assist to resolve this.
      I attempted to assigned 0DATETO and 0DATEFROM to my attributes of 0EMPLOYEE, but it gives me the following error
    <b>  Characteristic 0EMPLOYEE: Attribute 0DATETO cannot be used w. time-dependent attribte</b>
    <b>  InfoObject 0DATETO cannot be used as an attribute if attibutes already exist that are time-dependent. Attribute 0ANSALARY is such an attribute. A field in the InfoObject 0DATETO is automatically generated in the master data table.</b>
      Once again, what I want is to be able to allow the Records with HighDate in R/3 into my BW Cubes.
      Please please assist !

  • Records are not deleting in SAP CCM (CCM2.0), eventhough Action code 03 is

    Hi all,
    We are facing a problem in SAP CCM 2.0, products are not deleting from Catalogs ( Internal Catalogs)  eventhough action code '03' ( Deletion) is passing to Catalogs.
    In case of updating and new records creation is working fine , changes are updating and new records getting added to catalogs.
    Could you please advise why deletion is not working. what would be the reason.
    Is there any other way to delete the records from the Catalog.
    thanks in advance

    Hi,
    There is no standard functionality for deleting items from SRM CCM 2.0.
    Very recently, we have come across the same problem that materials/items which are deleted in SAP R/3 4.7 are not getting deleted from SRM CCM 2.0 catalog.
    We have done some analysis and found the below solution.
    - You need to send an action code "04" and drop Product Category information in XML file which XI uses to send the information from ERP to SRM CCM catalog.
    For this you need to modify the XML and XI mapping for the ZACTION code(03) received from ERP.
    Once the changes are done in XML, you re-publish the catalog.
    You will find the item/s have got deleted from the catalog.
    Note: It is important to note that even for deletion, system records action as catalog items Update/Created in the logs (SLG1) but not the action as catalog items deleted.
    Hope this helps !
    Regards,
    Vikas

  • Loading records from .csv file to SAP table via SAP Program

    Hi,
    I have a .csv file with 132,869 records and I am trying to load it to an SAP table with a customized SAP program.
    After executing the program, only 99,999 records are being loaded into the table.
    Is there some setting to define how many records can be loaded into a table? Or what else could be the problem?
    Pls advice.
    Thanks!!!

    hi Arun ,
    A datasource need a extract structure to fetch data .It is nothing but a temp table to hold data.
    First you need to create atable in SE11 with fields coming from CSV file.
    Then you need to write a report program to read you CSV file and populate your table in BW .
    Then you can create a datasource on top of this table .
    After that replicate and load data at PSA and use to upper flow.
    Regards,
    Jaya Tiwari

  • ESS WF WS04200009 Leave request with HTML (BP for SAP R/3 4.7))

    Hi there all,
    I hope somebody can help how to configure this scenario. I searched around on SDN and SAP Help but couldn't find a thing.
    I actually have 2 questions:
    1. is there somebody who has some how-to guides for the ESS scenarios especially about the leave request.
    2. Where are publishing the leave request in the portal. When i submit the leave request a got a pop-up with the message: you are not allowed to do this task.
    I hope somebody has some useful information.
    Thanks in advance
    Regards Maarten.

    Hi Maarten,
    These points may help you:
    1)All HTML templates should be imported into your IT Server.(ESS server)
    2)In tcode PFTC select workflow template WS04200009 and proceed to workflow builder.
    3) In workflow builder for each step select agent assignment and in the agent assignment attributes choose the general task option.
    Everything else is standard and should work fine.
    Regards,
    Rajeev

  • New table / field in SAP MDM not being reflected in SAP EP

    Hi,
    I have added a lookup- flat table in MDM and added a field corresponding to this table in my main Products table.
    I have maintained data in both the main table and the look up table thru Data manager
    Problem:
    I want to populate this field through the SAP EP. I am using std MDM iView Details template. When I check the drop down to select the table, I see only the ones which had come with the MDM std business content. The added tables/ fields are not visible on the portal to select :(.
    Can you help me out Please? Are there some settings that need to be done?
    Regards,
    Alpana

    As a mandatory requirement after completing the deployment process, the Web Application Server should be restarted for the changes made by the deployment to take effect and appear in the Portal.
    Have you restarted Web Application Server after deployment?
    Also check, User Mapping for the Connected MDM System
    Search for the User (Portal User) which needs to be mapped to the appropriate MDM User.
    It is quite interesting that you are getting all other tables in std i-view template except newly added.
    It could be also because you have already there connection of EP with MDM before that table and new field exists in MDM.
    And it is showing same existing table and fields, I mean not reflected now newly added table and field. I would suggest you to create the MDM connection with EP from scratch. Just give MDM System Name and ID, MDM Server, Repository, Language, Creating an Alias for the connected MDM System, User Mapping and connection Test for the Connected MDM System.
    May be it result in reflecting newly added Table and field which is not visible in EP as of now. Just give it a try.
    Hope it helps...
    Thanks and Regards,
    Mandeep Saini

  • Changes not reflected in SAP

    hi...
    I am using the Java proxy classes to connect to SAP...to be specific..i am creating a business partner using the sap proxy classes..the whole program runs successfully with no error messages and it returns me the new business partner number too....however when i search for the newly created parter thru SAP GUI...i find no record of it....wat cld be wrong..?

    GOt it...BAPI_TRANSACTION_COMMIT was the culprit

  • Need to transfer data records from one version of sap to another version of

    hello,
            i have a requirement where i need to transfer the tables  with the records in it from sap r/3 4.7 version to sap ecc 6.0 version,now the present issue is how to tranfer the data records from old version to new version......kindly help me in this requirement

    Hi,
        Write a program in SAP 4.7 to download all records to a flat file. Then write a program in ECC6 to upload all records from the flat file...........
    Thanks,
    Aditya.

  • Increase of MaxThreadCount doesnt reflect in SAP MMC

    Hi,
    We have increased the MaxThreadCount parameter in configtool from 400 to 600.
    After restart,in SAP MMC AS Java shared table info,it still shows 400 for "Used",
    "Peak" and "Limit" columns.We wnat the 600 to be reflected here.
    Can somebody please help?
    Regards,
    Sushma

    HI All,
    OK I got it.We have to set the value in Configtool->expert Mode->Instance->Shared Memory tab
    ->Threads value.
    Rgds,
    Sushma

  • Time changes at OS (HP-UX) level, and reflect to SAP

    Dear gurus,
    It is found that some of our SAP systems are showing time as 1 day ahead, It is because at OS level (HP-UX) time is 1 day ahead.
    My question here is, Is it sufficient for us to change OS timings? will SAP automatically reflect the time changes/ or do i need to restart SAP systems?
    Thanks and Regards

    Dear gurus,
    The date and time change on the running system will reflect on your business transaction and data extracation schedules, both should be address after set date and time. The date and time will reflect on system after restarting the instances.
    The application transactions use the ABAP processor clock, which uses the Database administration system on the database server
    The system log uses the operating system clock on its own computer (as do all kernel levels below the ABAP processor).
    Regards
    Anwer Waseem

  • Modify MDM record error through WebDynpro: com.sap.mdm.internal.protocol.ma

    When I use MDM java api thruogh WebDynpro portal try to save a record to MDM, I got this error:
    com.sap.internal.protocol.manual.ServerException: The selected node has children.
    Any help will be appriciated.

    Jitesh:
    thanks for your answer. It is great help.
    Let me put this way, if that is the problems cause, this only happens for one category when I try to save. I can save records to other category through portal application. So it is not portal problem.
    Then we come to MDM, how do I find out what is wrong with this category? Why other categories work and this one does not work?
    How do I find out why I have reference to parent node instead of leaf node for this category?
    What I can do in MDM side to find problem?
    thanks,
    Eric

  • STDMES field in EDI _DC40  value is not getting reflected in SAP R/3

    Hi All,
    We have a EDI to IDOC scenario.
    In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
    Value is not getting populated in SAP.
    Could you please provide inputs on this?
    Thanks in Advance
    Best Regards,
    Harleen Kaur Chadha

    Hi Harleen,
    Please check Note  SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
    Regards,
    Vikrant

Maybe you are looking for