Leave request- showing previous user's data

Hi All,
I am using ESS. Say there are 2 users.First user log in and accessed his leave request. Then he logs off.
When the second user log in , in the leave request it is showing first user's manager name instead of showing his manager name.
Can anyone advise on this?
Thanks!
Swarnaprakash

first of all do they have same manager? can you check in the ptarq>determine approver
Or you can delete the cookies of browser and check again!
in the table V_PTARQ_TPROCESSwhat rule is created is it "Last Agent, Then Line Manager".
or check in table HRESSAPPROVER what is maintained
Edited by: Siddharth Rajora on Apr 19, 2011 5:09 PM

Similar Messages

Fields "Used " upon Leave Request show carry forward instead of al

Dear all,
Staff have apply 1 days annual leave. However when the staff submit leave request via
ess, fields "used" in leave request show carry forward leave insteqad of annual leave .
The staff have carry forward but have fully utilize it before his apply the leave.
Is there any config can I check why the fields show carry forward?TQ

it is the same as per backend customisation
ie T554s absence is connected to which absence quota to deduct using a deduction rule V_556R_B
(T556C), Please verify.

Leave Request - Show or Hide by Country

Hello to all,
I have NW2004s EP 7.0, ESS BP 60.2, ECC 5.0.
I'm implementing the Portal in several languages but I only want to make "Leave Request" available for only a few of them.
Any ideas?
Thanks in advance.
Antonio

Hi,
There are two possible ways of doing this:
This could be possible with the customization of standard business package where in you need to write a piece of code to identify the logged-in user's location (from the backend and not the locale because locale could be deceptive) and thereafter dynamically displaying or hiding the link on overview page.
Second, go for a federated portal and the implementation would be much easier. You would not need to customize the standard business package. To learn more about federated portal, use this link : http://help.sap.com/saphelp_nw2004s/helpdata/en/89/f9ed428ccd5604e10000000a155106/frameset.htm
There is no such standard feature available in portal otherwise.
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers.

ECC 6.0 - Leave request show duplicate entries one with ERROR status

Dear All,
We have implemented standard Leave request process, we are facing the issue as mentioned below, Its not happening for all the time, however we want to what scenario this problem will arrives.
Problem description:
E.g. Staff applied annual leave on 10.06.2010, the leave request will sent for approval , after the approval of the leave ,every 30 min. we have scheduled a job which will execute standard program RPTARQPOST to post a leave request to IT2001.
After the approval when staff go into ess and see leave request details under "Show Overview of Leave" and its shows as 2 records for the same period one with APPROVED and another one with ERROR.
Type of Leave From TO Status Used
Annul

Hi Annul,
Please check SAP Note 986003 - ESS LEA: Incorrect ERROR status for records in RPTARQPOST.
May be relevant for your case.
Regards,
Dilek

Leave Request: Show Team Calendar

Hi Friends,
In Webdynapro javaLeave Application we have the option(Link) Show Team calender.It displays only direct reporties to that org unit. But it not displays the sub org unit chiefs in that list.
Do we have option to display all sub org unit chiefs in the Show team calendar list.
Please let us know the Configuration Changes in SPRO.
Thanks
Srikanth
Edited by: srikanth chowdhary on May 31, 2010 10:35 AM

Thanks
It is not possible we have checked with SAP

Error when creating a leave request

Hi Experts,
I am setting up ESS (WDA) EHP5 on Portal 7.3. I and ERP6. I got this error when clicking on the calender to create a leave request:
No data for infotype 0001, personnel no. 00000000 in period 2012-01-24 - 2012-01-24. (Modifiers not found)
Got the same error on the portal as well as using PTARQ
I did customizing for Leave Request and there are also data for IT0001.
Is there anything else missing?
Please advise.
Thanks.

SInce you are getting a message recarding pernr 00000000, it looks like your user in portal may not be tied to an employee via infotype 0105?
/Kirsten

Leave Request - Not Appearing in UWL

Hi,
I am facing a problem with the leave request not showing up in the manager's uwl. Under ess user, I am able to submit the leave request and it has a status of 'sent' in RPTARQDBVIEW. The workflow status shows as 'started'. When I select the work item and check the workflow log, under the 'view:workflow agents' tab it shows 'work item reserved' for the mss_user. I'm not sure if this correct. Does anyone know why it would show 'work item reserved'? In the workflow, it stops just before the 'Process Request' step.
I verified that all tasks are set as general tasks.
Does anyone have any suggestions as to what else to check? Please help.
Regards,
Brian

Hi:
We transported our ESS/MSS changes from the DEV client to STG client. I have verifiied the follwoing settings in STG:
1) SWU3 - all connections are green.
2) Workflow template and tasks - all are assigned as general task with agents assigned
3) Configuration in SAP contains the correct WF template for leave processing
4) UWL has been regenerated
I am able to submit a leave request under ESS user. I check workflow and it shows leave has been submitted and waiting for Manager to approve step.
However, under MSS user the leave request is not showing up in the UWL. All configuration on backend and the items noted above have been verified.
Is there configuration or a connection on the portal side that I need to check? Or anywhere else? Any input would be greatly appreciated.
Regards,
Brian

Leave Request Not Appearing in UWL for Manager

Hi,
We have a strange issue where leave requests are not appearing in the UWL for a specific manager. We have checked with other managers and the leaves are appearing in their UWLs and they are able to process their employee's leaves without any issue.
For the manager not seeing the leave in their UWL, I have confirmed the following:
1) Proper manager defaults in 'approver' field in ESS and employee is able to send leave request without issue
2) Manager receives email to process employees leave request after RPTARQEMAIL program runs
3) Leave is reaching the manager's business workplace in R/3 so this verifies workflow is working and the leave is being directed to proper manager for approval
4) Proper roles have been assigned to manager and verified in PRD
*Also, the leaves were appearing in the manager's UWL at one point but no longer appearing. This makes it more confusing!
Does anyone have any suggestions/ideas as to what may have happened?
Any feedback would be greatly appreicated!
Regards,
Brian

Hi:
We transported our ESS/MSS changes from the DEV client to STG client. I have verifiied the follwoing settings in STG:
1) SWU3 - all connections are green.
2) Workflow template and tasks - all are assigned as general task with agents assigned
3) Configuration in SAP contains the correct WF template for leave processing
4) UWL has been regenerated
I am able to submit a leave request under ESS user. I check workflow and it shows leave has been submitted and waiting for Manager to approve step.
However, under MSS user the leave request is not showing up in the UWL. All configuration on backend and the items noted above have been verified.
Is there configuration or a connection on the portal side that I need to check? Or anywhere else? Any input would be greatly appreciated.
Regards,
Brian

Link for ESS leave request?

Hi,
Can some one tell me how to display Ess leave request form ( THR10_1, Lesson Time Data figure 74)
Ejaz

Hello,
It's not a form, it's an Iview. You can access the Iview in 2 ways:
1. Via Content administrator, on the following path:
Portal Content
Content Provided by SAP
End User Content
Employee Self-Service
iViews
Working Time
Leave Request
2. Via Portal Directly, on Links:
ESS -> Working Time -> Submit Leave Request
(opc). Or via the Service directly. But this is only used for testing purposes. You can access the service via the following url:
http://HOST:PORT/webdynpro/dispatcher/sap.com/ess~lea/LeaveRequest
Regards,
Bentow.

ESS Leave Request cancelation

Hi All,
User is not able to delete or cancel the leave for which he has applied, in Leave request overview, when user cancles the leave request the system gives message that Request cannot be deleted.
Please help me on this, as business needs to change or cancel the leave applied.
Regards,
Aman

hi
If you are on ECC6 , there is configuration related to this
you have to check in the table V_T554S_WEB
double click on the leave type
the system will show a screen , locate the section
system response ,
uncheck the last 2 options.
Save and check .
please reward points
Regards
Sameer.

Unable to process leave request due to WORKFLOW Status in ERROR in ESS Portal.

Dear Experts,
I'm facing an issue with the leave request of an user. The user has applied leave a week ago but still it has not got auto approved.While analyzing the database of leave request in PTARQ, it has been found that the WORKFLOW STATUS is in ERROR and the DOCUMENT STATUS is in SENT condition.
Kindly help me in this case.
Please refer the screenshot below.
Thanks & Regards,
Surendhar

Hi surendha,
That particular leave request might have gone into error because of worklfow issue at the point of time.
You can simply check with workflow if any issue with workflow was there in that tenure , leave request was being raised,
Now solution is to delete the leave request from PTARQ which is in SENT status and workflow is errored out.
Also take that work item id and get it deleted by workflow consultant (T code SWI5).
Once that leave request/work item got deleted , ask user to again apply leave and it would go to manager for approval.
Once leave request is approved, leave request would be in Posted status and will get updated in IT 2001.
Hope it helps you,
Thanks.
Priya

Leave request in ESS problem

hi there,
we are planning to use ESS 'leave request' in our portal for users to enter their leave requests for holiday, illness, etc.....
we will have about 1200 users, but there is a big problem:
for some of the leave request-types like illness (and others) it is not possible that the user himself enters this information. so a reponsible person for the area (e.g. a secretary or someone else) have to enter the leave request for the other person. e.g. when the person is ill: the request for it MUST be entered the first day of the illness ! and the employee can't do it on his own, because he is of course ill and not at work.
is there a solution in ESS (SAP Netweaver 2004s 7.00, with backend HR ECC 6.0) ? i cant find anything. it is only possible to enter the OWN leave requests for the user which is logged on into the portal.
b. reg, Martin

Martin,
we have about 1200 employees here ! Illness (and other absence) MUST be entered by other persons then the employee himself. CATS is not working with that in ess-portal and also not the leave-request.
PA30 is an license-problem ! i can't allow users to use it............thats why we have a portal ! why should i let people enter leave-requests in the portal and other abscense in the backend ? thats a very bad thing ! very user-unfriendly !
best reg, Martin

JCO Error in leave request.

Dear Experts,
When i open the leave request application, when we select date & leave type & go futhure ...i am facing below mentioned error in my portal.This is after upgradation of EHP5
JCO$Abap Exception
com.sap.mw.jco.JCO$AbapException: (126) NOT_FOUND: NOT_FOUND
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3486)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20965)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:21367)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20990)
at com.sap.mw.jco.JCO$Repository.getFunctionInterface(JCO.java:21094)
Regards,
*Nisha K

Dear Nisha,
Hope you are doing good.
The below link gives the reason for this issue:
http://help.sap.com/erp2005_ehp_05/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Can you please download the latest patch level of the RFC library for your release as well. Please see note 413708 on how to download the RFC library.
Make sure that the JDK being used is supported and if the issue persists, enable the below JCo trace as per:
628962 - How to switch on the SAP JCo trace
Then reproduce the issue and check the latest logs for more info..
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Bought used macbook air and do not have previous users password. how do i change admin settings without that?

I have purchased a used Macbook Air and am trying to clear previous user account data from system. Previous user gave me his password but it does not work and he has no other ideas. If/can I reboot somehow and not loose the programs that he had installed?
System is MacBook Air 11-inch Mid 2011
1.6 Ghz Intel Core i5 processor
Memory 2GB
Graphics Intel HD 3000 288 MB
Software OS X 10.8.3 (12D78)

You have to erase the drive and reinstall under your ID etc.
Previous user gave me his password but it does not work and he has no other ideas. If/can I reboot somehow and not loose the programs that he had installed?
Unless you bought those programs under your account they are not yours and you have no rights to use them, you will also be unable to upgrade or reinstall them.

"This user's data doesn't need to be transferred"?!?

My wife's iMac's hard drive bit the dust (and the machine was only 1 week old!). I had a TM backup. Upon bring back the (supposedly fixed) iMac, I hooked it up to the TM drive, and elected to "restore from Time Machine" on the setup assistant. Everything went ok, and her account got restored, but during the early step where you get to tick on or off for various things to restore, under my account it showed "This user's data doesn't need to be transferred" instead of the total size (like it did for the others). The drive was a new one (replaced) and so couldn't still have had my stuff on it. What does this mean and why won't it restore my account?

That sounds like the message you get when trying to go "backwards" on OSX versions via +Setup Assistant.+ For example, trying to transfer from Snow Leopard to Leopard.
But +Setup Assistant+ isn't what you want to use anyway; your best bet is to do a "full system restore", via #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Leave request- showing previous user's data

Similar Messages

Maybe you are looking for