Leaving Action Date not refleting properly

Dear Expert,
We have implementing Germany Payroll for our client. We have created the actions like - Deputation Initiation, End of Deputation which is similar to Hiring & Leaving.
While executing End of Deputation action, system is not taking the actual date given in all the info types. For Ex : End of Deputation date is 31.08.2008. But while excecuting the action IT0000 & IT0001 system is taking end date as 31.08.2008. But IT0006, IT0009, IT0014 & the customised info type which we have cretaed are taking the end date as 30.08.2008.
Please note that we need to pay salary for 31.08.2008. Please suggest how can I get froward??
Thanks a ton in advance
Regards,
Damodar Pai

Hi Damodar,
When you are running End Of Deputation action( Leaving action); on initial PA40 screen you enter 31.8.2008 in the From field and then run the action. The system will automatically take the End Of Deputation Action Date as 1.9.2008.
That means the Last working day date of employee is 31.8.2008 and the salary will be paid till 31.8.2008
Check in table T529A; in the Date field entry should be 1( specified filed is end date of old records)

Similar Messages

Leaving Action does not change position to 9999999 in IT0000 screen

Hi All,
I have come across a very peculiar problem which I haven't seen before. When performing a leaving action in my clients QA system, the initial IT0000 screen is displayed with the position field not showing the default position 99999999 which it should do. The existing position of the person is displayed instead. Also, when saving the IT0000 screen no further IT's are shown from the infogroup. Even IT0001 isn't displayed. All infoypes that are meant to appear in the infogroup are exisiting for the employees that I have tested. Has anyone come across this problem before?
Thanks,
alw

Hi Ash,
Leaving action means leave related action like long term leave or you are talking about termination action.
If it is absence related action, then position does not become 99999999 in IT0000 while performing action. For this you need to set up dynamic action like below. We have set up for Retirement action.
0000         04     80           DETERMINE DEFAULT POSITION FOR ZO-RETIREMENT
0000         04     82     P     P0000-MASSN='ZO'
0000         04     84     W     PSPAR-PLANS='99999999'
0000         04     86     W     P0001-PLANS='99999999'
If it is for Termination action, position becomes 99999999 in It0001 as per SAP standard functionality. If you need to make position as 99999999 then you may set up like above.
Regarding your 2nd question, I had similar problem like you long time back. Why it was happening for me --- There is no sub type in It0001, by mistake sub type 1 had been maintained for that action while creating infogroup. So just check your infogroup once.
Regards,
Purnima

Data not aligned properly

Here's my rtf structure
group-by Product
<there's a table in here>
for-each Company
<there's a table in here>
for-each Community
<there's a table in here>
Data appear as below
Computer
<there's a table in here>
Company 1000
<there's a table in here>
Community A
<there's a table in here>
Community B
<there's a table in here>
Community C
<there's a table in here>
Company 2000
<there's a table in here>
Community D
<there's a table in here>
Community E
<there's a table in here>
Right now, the Community C table header for example, will be on page 1 and its table will be on page 2 because its table does not fit on page 1. So I selected for-each Community then paragraph -> Line and Page Breaks -> Keep with Next. Then it works but the data appears as below
Page 1
Computer
<there's a table in here>
Company 1000
<there's a table in here>
<THERE A BIG BLANK SPACE HERE>
Page 2
Community A
<there's a table in here>
Community B
<there's a table in here>
Community C
<there's a table in here>
The Community Headers stay with their tables but there's a big blank space between a Community A and Company 1000
I did the same Keep with Next with for-each Company and same result, I did it for group-by Product and same result, big blank space
How can we make it so data will flow with each other and if a table header (Product or Company or Community) does not fit on a page then it will go to the next page please?

Thanks Kavipriya for your help. The report shows data properly now.
Thanks Nagireddy for your offer.

Smart form header data not displaying properly

dear abapers,
     i need to display header..but am not able to get the data properly...

Hi,
     Take a Text Element at the place where u want header(Before main Window) or
     use appropriate Smart Style(font ,size,style) or
     Check the Table ,Template Layout (if used).

Disabled subscription sends notifications, relative date not working properly

Hi
I have two problems regarding subscriptions:
1.When I disable a subscription, should I receive any further notifications? I am receiving notifications despite disabling the subscription.
(I have cloned the template and deleted the original template, then sending email notification will be stopped, but as soon as assigning new template to subscription, sending emails starts, whether subscription is enabled or not)
2. The criteria for subscription is as follows:
Status = Active or Status = Pending and Source = Portal and Created date [relative] = [now-7d]
Regarding the criteria, it must check whether it has past 7 days from incident creation, but it starts sending notifications without considering the [now -7d] condition.
I use SCSM 2012 SP1 - Rollup 6.
Am I doing something wrong?
YSobhdel

The actual criteria was Created Date greater than or equal to [now-7d]
What I am trying to accomplish is that whenever an open incident (i.e., not resolved or closed incident) is active more than 7 days, assigned to user will be notified.
My Question is , why is it happening in the first place, this criteria is nearly impossible to catch (equal to [now-7d]), yet it is sending notifications from the first day. I have testes the notification with
Created Date greater than or equal to [now-7d] as well but to no avail, still the same problem.
About delay, I am 100% sure that this is not performance problem, since this workflow is set to periodically check criteria and is run once a day. I have waited for the setting to apply for about two days and this is far beyond any delay! (for two consecutive
days, I have received this notification).
YSobhdel

Data Not Updating Properly in CUBE

Hello Experts,
There is one critical issue which i am facing in FI - CO scenario. please provide your inputs.
we have a requirement to generate PNL statement report from FI - CO. means the values for Revenue, COGS must be come from FI and Operating expenses like Sales and Marketing, Research & Development, General Administrative must come from CO.
we took two Data Source 0FI_GL_10 and other is 0CO_OM_CCA_9. the entire data flow for FI is 0FI_GL_10 --> 0FIGL_O10 --> 0FIGL_C10 --> ZFICO_M01 and the entire data flow for CO is 0CO_OM_CCA_9 -->ZCO_C01 --> ZFICO_M01. i have initialized data for both the data source. and for delta i have created process chain on hourly basis because our customer runs the report hourly basis means they post some entries in FI and they wanted to see it in BI after an hour.
Now when we load delta records on hourly basis . all entries are not coming means some are missing. but if we check it after 24 hour then it will be come in cube. but after an hour it is not coming.and in that i case i have to refresh entire BI means delete all the data from BI and then load init again and all.
are there any settings in ECC (R/3) side so that we can have right records in BI ?
Regards,
Komik Shah

Hi Komik,
When there is a process chain to load the data on hourly basis. It would reflect the data in the cube. If u still found the problem then u have to check the process chain in which the info packages have been added. I don't thinks there is a ABAP program for this.
Regards,
Rahul.

DATA not coming properly

Hi ,
I have a customized report which uses the logical databse PSJ. It has project, wbs element(prps-posid) in the selection screen. When I give input to the project , the output is coming properly with the field(WBS element), but when I give the output WBS element as input in the field , it is retrieving some more data . I went into debugging and found that while retrieving posid from prps table , it is retrieving the value '############' due to which the output has more than the records that should be . Anyone has come across this scenario, please reply .
Thanks in advance.

I assume that the change is present in the PSA. If so is it just one field that is changing or multiple fields. ?
Also make sure the PSA is empty before loading.
Asif

Data not shown properly

Data entered and loaded, but it doesn't appear in the grid or data forms. In the cell history and data audit the data is shown as entered and loaded. Do you know this phenomenon.

I would suggest you do a Data Extract, and see if any data is extracted. What this will also show you, is the POV.
It is not uncommon that the POV is at Entity Currency Total or similar, and as you may not have run a consolidation yet, the view feels empty. Also, set up a grid, and check the status. You should see CN flag which would indicate data has 'changed', and requires a consolidation.

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

Chain and store data not populating properly in BPARTNER

Hi all,
There is a field 0bpartner2 in the data source name 0BP_RELATIONS_ATTR. This field is also there in DSO1 which fetches the data from the mentioned datasource. Then using routines this field 0bpartner2 splits into two-->chain and store which are getting populated in the next level of DSO, DSO2 which finally goes into 0bpartner infoobject.
But for two particular bp nos the values of chain and store are not getting populated.
Checked in RSA3, the data is OK, but in the PSA level the data is not there.
This is happening only for this two particular bp nos.
Kindly help.

Hi,
at info package data selection don't have selection please check the below options.
1. go to ECC -> enter the t code- RSA5 -> select the data source -> go to change mode -> select the check boxes possibility.
2. if not there come to BI system select the data source go to change mode -> select selection menu -> browse and choose the X- selection possible.
now it available selections at info package - while seeing the RSA3 data give the selection at info package
Thanks,
Phani.

Float type data not coming properly in ALDSP 2.5

Hi,
we are using ALDSP 2.5. We have a SQL server data base. We have created data services based on stored procs from this data base. we have a read method with a field declared as float data type. But the DSP is not showing up the correct data.
For example,
we get 250526.31 in DSP where as the stored proc returns 250526.32
here are some more samples,
DSP StoredProc
594919.8     594919.79
248918.8 248918.79
339514.47     339514.48
322823.47     322823.48
695810.8 695810.82
694300.44     694300.42

open a case with customer support. Attach your DSP dataspace and client, and your stored procedure definition.

Data Not Aggregated properly in the visualization

Hi Experts,
I have created a Simple BO Explorer report with a few facets and the automatic measure 'Occurrences'. The Facets Panel shows proper data. But when I have the Visualize Panel open it shows a different result. I am not sure why this happens as I am new to BO.
Kindly check the screenshot to get a clearer idea.
Thanks & Regards,
Shreepad Patil

Hi Shreepad,
thanks for your reply. I thought it was HANA source. So this is a known issue with HANA or Explorer at the moment, I can reproduce the issue, and it seems to be a problem mainly for calculated columns. Still under investigation. Is Region a calculated column?
If you trace the Explorer Exploration server and get the chart query (the smaller one in the log) and run it in HANA Studio you will see that HANA is also returning 1 for occurences. If you want you open a message with SAP.

GL_JE_HEADER table : Posted date not update properly

Hi All,
I have seen that for few of the journals created inside GL, The posted date inside the GL_JE_HEADER table is update with a date instead of time stamp.
i.e the posted date column is updated as '7/08/2013' instead of '7/08/2013 4:40:39 AM'
This has caused some problem in te system.
was wondering if you could help me to get an answer for this.
regards
Amit

i am thinking that you want to include the time when you query the column post_date from table. if you are using SQL*Plus the default display for the date does not include the time. to include the time when you do a select on any data column use the ALTER SESSION SET NLS_DATE_FORMAT command.
e.g.
SQL> select sysdate from dual;
SYSDATE
18-SEP-13
SQL> alter session set nls_date_format = 'dd-mon-yyyy hh:mi:ss am';
Session altered.
SQL> select sysdate from dual;
SYSDATE
18-sep-2013 11:57:17 am
SQL>

Dates not preserved properly in Aperturre File iPhoto

I want to batch adjust image date and time in Aperture.
Problem 1...
I use "Select All" and "Adjust Date and Time..." but Aperture only changes the date of 1 or 2 correctly. The rest are close but off by a few seconds, minutes, hours or sometimes days. It seems pretty random. As a result, I have to change then individually.
Problem 2...
I export Aperture projects to a folder/file structure, then import them into iPhoto. However, the dates I set on some of the older photos were not preserved across to iPhoto. It seems to preserve the day and month (mostly), but not the year and time. Newer photos (taken with my DSLR or P&S) keep their correct "image date" when transferred across to iPhoto. I have tried with "Also change master files" selected and unselected.
I can't understand this strange behavior.
The end problem for me is that my iPhoto Events are not displayed in correct chronological order. I know I can "Adjust Date and Time..." in iPhoto but I like to use Aperture 2 as my primary photo management tool, since I use it for professional photography as well. I keep a master family photo album in Aperture. I don't want to do any "management" in iPhoto. I want the import from Aperture to iPhoto be quick and accurate.

Washed away with time.

Loading date Not calculating Properly for Standard Order.

Hi Gurus,
I am facing issues in "OR" order type sales order where Loading date is not getting calculated correctly.
On discussion with the client it was clear that they tried to schedule the Order manually for couple of times.
But as much I believe Loading date should automatically be determined in SAP based on scheduling date.
can any one tell me if there is any OSS note available for this or do we have any alternate solution for this case.
Early reply Appreciated...
Thanks in Advance!!!!!!
Best Regards,

Hi All,
Any one who has faced this type of issue.

Leaving Action Date not refleting properly

Similar Messages

Maybe you are looking for