Leaving for a trip soon need help!!!!

I went into settings and pressed reset my phone and all settings about 10 hours ago, and then it went into the loading screen and has been "loading" ever since, and I'm leaving for a trip in 12 hours, need HELP!!!!!!!

That should only take seconds. Something has gone wrong. You're gonna have to force the phone into recovery mode & restore it:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Similar Messages

Could Not Find Installation Information for this Machine" I need Help!

i accidentaly erased the main drive and now i am trying hard to reinstal the OS X again but i constantly keep seeing this "could not find installation information for this machine" i need help....

hello,
I had the same problem yesterday, just go to a place with a better internet conncetion, it will work fine...
good luck

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help.

Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help. Can someone give me some direction ?

jpatricio787 wrote: ... is it possible to use it with my white MacBook ?...
OK so yes, but if, and only if:
(1) your MacBook has a Firewire port (not all do)
- and -
(2) your old external iSight camera works (not all do)
- and -
(3) your MacBook is working properly.
If you are not certain whether your MacBook model has Firewire, you can search MacBook Technical Specifications for your model. Alternatively, check the User Guide Manual that came with your MacBook for the information you need to be certain.
If you are not certain that your old external iSight camera works, you can test it using the suggestions in this link.
jpatricio787 wrote: ... if so how do I go about it ? ...
Follow the instructions in your iSight User's Guide to connect and turn on the iSight. Then launch the Apple app you want to use with your iSight. If you need more information about using an app, search for "camera" (without the quote marks) in the Help menu choice for the app.
jpatricio787 wrote:... Can someone give me some direction ?
If you need more direction, post back the specifics of what you still need. We will offer further direction based on the details of your reply.
Message was edited by: EZ Jim
Mac OSX 10.9.3

Adobe Premire Elements 13 purchase wouldn't download. No support no help no phone mnubers. Found a number and was on hold for over 25 minutes. need help need a number to call.

Adobe Premire Elements 13 purchase wouldn't download. No support no help no phone mnubers. Found a number and was on hold for over 25 minutes. need help need a number to call.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

TS1559 I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi settings grayed out or dim - Apple Support
I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

I haven't used an Apple computer for years. I need help getting started

I just bought a mac mini after 20 years using a PC. I need help getting started. Any beginning manuals out there? Thanks.

New User of Apple wrote:
I just bought a mac mini after 20 years using a PC. I need help getting started. Any beginning manuals out there? Thanks.
Welcome back. Do not overlook the Finder and individual application Help menu support. The links provided above are great starter references. With tongue in cheek, they also may not be as current as the OS X release on your mini, so expect some differences.
Here are a litany of keyboard short-cuts, last updated in June 2012, that may prove selectively beneficial.
For actions like copy(c), paste(v), cut(x), print(p), and select-all(a), substitute the command key instead of control key.
If you right click on a file, this menu will seem familiar. Press the option key and notice the menu changes. If you copy a file(s) from this menu, change to the destination and then press option with the right button menu to see copy file(s) changed to move file(s).
To quickly view a file's contents, left click on the file icon, then press the space bar.
The native file format for OS X is PDF. Thus, when you choose to print, you also have the option to save as PDF with web links preserved.
Enjoy your mini.

HT1918 how to change the email for my "password recovery" need help changing the recovery email not main.

Need help on switching my password recovery email because it is sending to my old email. Anyone know how to do this?

Hi Krebbo,
I apologize, I'm a bit unclear on exactly what the nature of your issue is. If you are talking about changing the Apple ID that your iPhone currently uses for services like the iTunes Store, you may find the following article helpful:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Regards,
- Brenden

I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

eehenry wrote:
It is a problem with a secondary provider, "mag cloud" .
Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

I hear an echo when i play some mp3's :( Leaving soon need help.....

I've got a 60 gig pod and i filled up about 45 gigs, tommorrow i'm going on a year trip to South America and while i was listening to some songs today i heard an echo in the background (only with mp3's).
If anyone knows anything about this problem please help me out cos i want to get this thing working by the time i leave.
Thanks in advance

For both my problems i tried with different headphones and on itunes i hear the songs without an echo.
I also chaget the EQ settings in the ipod menu and still heard the echo.
I also found that i don't hear it on songs that i burned straight from a cd just some mp3's.
It's unbearable...
I also tried reseting my ipod but nothing.

HELP ME!!! I leave for a trip tomorrow

ok I can't figure out how to put movies on my I-pod PLEASE HELP ME.....god i feel really stupid!

I am having a problem loading the movie once I purchased from itunes and synced it to my ipod. It says it is loading and the screen is black and then it goes to the previous screen and the movie name appears highlighted again.
As far as yoru own DVD's, I have heard that there is software you have to purchase to rip the movie into a format and then you need other software to convert the ripped DVD to an ipod compatable format. Sorry - I don't know the name of the software yet (still looking), but you can search on-line for it.

Trying to get Essbase Client 11.1.2.3 for Linux 32bit, please need help

Hello,
I am running a RedHat Enterprise Linux 6.4 64-bit system and have an application that requires the 32-bit Essbase Client 11.1.2.X libraries in order to connect to an Essbase 11.1.2 server instance.
From reading through the forum posts for the past couple days I have come to an understanding that Oracle Essbase 11.1.2 no longer ships a Linux client as a separate assembly so you have to install the full Essbase server then extract the client files out of that to use.. So I am trying to get the correct bundle of files downloaded to even get the installer to launch properly so I can select a minimal installation including client components, but I can't get the correct zip files, I am getting close, but there is still a few missing, and the instructions I have found seem to refer to 11.1.1.X versions that have changed quite a bit in the 11.1.2.X version.
Can anyone please help me figure out what I am still missing to get the install running and how to extract the client libraries?
So far, I have downloaded:
2073792430 Apr 22 11:43 Apps-11123-linux32.zip
2440713397 Apr 22 11:46 ClientInstallers-11123.zip
554953827 Apr 22 11:47 Essbase-11123-linux32.zip
171726540 Jun 20 09:08 FinancialManagementAnalytics-11123-linux32.zip
1053291166 Apr 22 11:52 Foundation-11123-linux32-Part1.zip
1603812256 Apr 22 11:53 Foundation-11123-linux32-Part2.zip
939688909 Apr 22 11:53 Foundation-11123-linux32-Part4.zip
1597577101 Apr 22 11:55 Foundation-11123-Part3.zip
1801831469 Apr 22 12:01 OHS-11123-linux32.zip
366584941 Apr 22 12:04 RA-11123-linux32.zip
BUT I still have the following missing assemblies I can't account for:
EPMINS-01001: One or more preinstallation checks failed. Correct the errors before continuing with the installation.
Check assemblies: /home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hfm_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient64... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hsf_server... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient32... Not exists
/home/ntruhan/Downloads/essbase/assemblies/fdm... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/bpm_architect_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/hsf_webapp... Not exists
I am going through the list of entries, but the only references I have seen so far have been for Windows downloads and this is linux, and then there are the Assembly for linux32 messages, but I need that since I need the 32bit client libraries, right?
Can someone shed some light on this adventure in installing all of this since all of the install instructions I have been seeing are for an older version packaged differently?
Thank you in advance,
Nathan

Thank you for this. It set me on the right path. I wound up installing all of them as I was still getting those errors, but after I realized the REAL error was not the aseemblies not exsisting, but it was the "EPMINS-01084: Assembly for linux32 platform is used Failed!" error.
The Linux System i was TRYING to install on is RHEL 64bit, but I was trying to install a 32bit client as i needed a 32bit client. It just refused to install a 32bit client on a 64bit Linux machine.
I configured a CentOS 32bit Linux VMWare image and viola, the same driver files installed without an error.
Not sure why the 32bit client would not let me install on a 64bit system, but I finally got it now.
Now to tar the Essbase directories up and move them over to the RedHat machine where I need them.
Thank you for your help.

Building a GOD BOX for PHOTOSHOP CS 2 need help on specs

I will review my situation in detail but If you would like to also read a linked similar posting here it is::
http://www.bigbruin.com/forum/viewtopic.php?t=8269
Ok so, I made a deal with the local PC shop, I will be trading my time as a photographer for a large portion of the cost of hardware that they would otherwise not be selling. Some things they will have to order but most of the things I need even the high end stuff they already have. So Money is of no object.
I am running into issues with my current system being that it is nearly 6 years old and I custom built it for under $150 Monitor included. Since then I have upgraded my Camera Equipment as I have become more and more sucsessfull with my photography business. I am currently shooting 16.7 Megapixel files with my Canon 1DS Mark II and 22 megapixels with a rented hasselblad with a Phase One Digital Back. Frankly my 700Mhz machine just isn't cutting it. It's time to upgrade.
Now Normaly I would go All Mac and Get a top of the line G5 Quad processor unit fully upgraded however I am still young and dont have good credit dispite all my efforts and they just wont finance me. so this local PC shop is my only hope. Thus I need a top of the line system.
This computer is going to be expandable so I need to have extra drive bays so a Full Server Tower is in order I think!
Also I am opting for aluminum Case because it is more conductive than plastic and should help radiate some of the heat this GOD BOX is going to Generate.
I could use some specifics for each of the areas, if anyone has experience with high end systems and would like to recommend hardware I am all ears. The information is only a light template. "think of it as a layer" nothing set in stone. However I would appreciate a swift reply because I will be building the system in less than a week!
(( STORAGE & SPEED ))
I heard that having seperate hard drives is the way to go to improve performance. Also It will help me keep things organized and easy to reformat if I have a problem with an OS. here are the specs a friend suggested.
80 Gig Raptor HD for OS
180 GIG Serial ATA Raptor HD for Photoshop dedicated Scratch Disk
180 GIG Serial ATA Raptor HD for working files for Quick accessing (temp files).
two 320 Gig Serial ATA Raid slower more reliable Hard Drives for a Mirror Raid setup image reduncancy is a good thing for photographers when a currupt Hard drive means missed deadlines lost clients and lawsuits!! YIKES!
2 DVD + - Combo Drive's that can accept dule layer dvd's unless anyone has heard of the Maxell Holographic Optical Storage Media coming out early january?? 120MB/s transfer speed, 50+ years archive life up to 1.6 terrbytes of storage!! I cant wait until its in production!
(( Processor BUS SPEED MOTHER BOARDS AND MEMORY ))
I need the best most reliable PC Mother Board that can accept the fastest long duration memory, I am aware that there are some types of ram that have higher speeds but cant move as much data at a time. Since much of what i do is batch processing longer periods are a better solution for me than faster acceloration.
This is strictly a photoshop machine No games no email just photoshop the way computers were made to run.
Whats the best motherboard that suports dule / quad processor systems??? are there quad processor systems available for PCs? can photoshop CS 2 muchless Windows XP 64 support such hardware?
it's got to be 64bit processors dule core if possible
someone told me Dule channel DDR PC8000 is the way to go, ANY Comments?
Whats the best CRT Monitor for under $1200
I specify CRT vs LCD because LCD still dosn't have the quality in dynamic range that CRT have, and the DMAX of a LCD is much more worse than the Dmax of a CRT.
Some obvious perifials are Firewire 800 and 400 standard and USB 2.0 ports
is there any news of Photoshop accepting more than 4 GIGS of ram in the next update?? If so I may opt for a 8 G

I will review my situation in detail but If you would like to also read a linked similar posting here it is::
http://www.bigbruin.com/forum/viewtopic.php?t=8269
Ok so, I made a deal with the local PC shop, I will be trading my time as a photographer for a large portion of the cost of hardware that they would otherwise not be selling. Some things they will have to order but most of the things I need even the high end stuff they already have. So Money is of no object.
I am running into issues with my current system being that it is nearly 6 years old and I custom built it for under $150 Monitor included. Since then I have upgraded my Camera Equipment as I have become more and more sucsessfull with my photography business. I am currently shooting 16.7 Megapixel files with my Canon 1DS Mark II and 22 megapixels with a rented hasselblad with a Phase One Digital Back. Frankly my 700Mhz machine just isn't cutting it. It's time to upgrade.
Now Normaly I would go All Mac and Get a top of the line G5 Quad processor unit fully upgraded however I am still young and dont have good credit dispite all my efforts and they just wont finance me. so this local PC shop is my only hope. Thus I need a top of the line system.
This computer is going to be expandable so I need to have extra drive bays so a Full Server Tower is in order I think!
Also I am opting for aluminum Case because it is more conductive than plastic and should help radiate some of the heat this GOD BOX is going to Generate.
I could use some specifics for each of the areas, if anyone has experience with high end systems and would like to recommend hardware I am all ears. The information is only a light template. "think of it as a layer" nothing set in stone. However I would appreciate a swift reply because I will be building the system in less than a week!
(( STORAGE & SPEED ))
I heard that having seperate hard drives is the way to go to improve performance. Also It will help me keep things organized and easy to reformat if I have a problem with an OS. here are the specs a friend suggested.
80 Gig Raptor HD for OS
180 GIG Serial ATA Raptor HD for Photoshop dedicated Scratch Disk
180 GIG Serial ATA Raptor HD for working files for Quick accessing (temp files).
two 320 Gig Serial ATA Raid slower more reliable Hard Drives for a Mirror Raid setup image reduncancy is a good thing for photographers when a currupt Hard drive means missed deadlines lost clients and lawsuits!! YIKES!
2 DVD + - Combo Drive's that can accept dule layer dvd's unless anyone has heard of the Maxell Holographic Optical Storage Media coming out early january?? 120MB/s transfer speed, 50+ years archive life up to 1.6 terrbytes of storage!! I cant wait until its in production!
(( Processor BUS SPEED MOTHER BOARDS AND MEMORY ))
I need the best most reliable PC Mother Board that can accept the fastest long duration memory, I am aware that there are some types of ram that have higher speeds but cant move as much data at a time. Since much of what i do is batch processing longer periods are a better solution for me than faster acceloration.
This is strictly a photoshop machine No games no email just photoshop the way computers were made to run.
Whats the best motherboard that suports dule / quad processor systems??? are there quad processor systems available for PCs? can photoshop CS 2 muchless Windows XP 64 support such hardware?
it's got to be 64bit processors dule core if possible
someone told me Dule channel DDR PC8000 is the way to go, ANY Comments?
Whats the best CRT Monitor for under $1200
I specify CRT vs LCD because LCD still dosn't have the quality in dynamic range that CRT have, and the DMAX of a LCD is much more worse than the Dmax of a CRT.
Some obvious perifials are Firewire 800 and 400 standard and USB 2.0 ports
is there any news of Photoshop accepting more than 4 GIGS of ram in the next update?? If so I may opt for a 8 G

Looking for a new laptop, need help!?!

I am searching for a new laptop to use in college and i am planning to spend $900 to $1000 on it and would like a laptop that is not too big (like equal to or under 16".) I would like at least 500GB hard drive and processor that is good but not to strong that I have no battery life. I was thinking i5 processor. I would like it to have enough battery to be able to use through good chunk of day (like 6hr rated or so.) It needs to be somewhat durable as I know college will take its toll on the computer. It would be great addition to have a good video card. I don't know if there is anything out there like this but hope there is. Please post suggestions or new ideas about what i would need for college. Thank you for any help!
Luke

Hi Lukedmann,
Thank you for considering Best Buy for the purchase of your next laptop. As we start off the Back to School season you should start seeing the introduction of quite a few new models, and some that should be able to meet your need. With the way technology advances day to day, this shouldn't be impossible to maintain.
Personally, taking into account any and all biases I have and stuff, theres 4 models i'd point out to you inside my store. Understanding that these are not your only options, and that I think that the aethetic design of the computer (how nice you think it looks) should definitely play a role, i'm sure any of these should be able to meet the demands you specified.
3 Models to Compare
Overall these are pretty close to your price limit, and I chose these assuming you wish to spend 900-1000 on the laptop and already counted in taxes, accessories, softwares etc. Just to let you know I discounted some models to give you the higher quality, however some models which come out to cost less would still meet your specified criteria. Let us know if you have any questions.
Sincerely,
Agent Lamar
========== If my post was helpful, please hit the Kudo button on the left hand side of my post. While i am an Best Buy/Geek Squad employee, my opinions are my own. Language is both mans greatest achievement and our biggest failures. Miscommunication is always my first assumption. ==========

Leaving for a trip soon need help!!!!

Similar Messages

Maybe you are looking for