Leaving the front panel displayed on a subpanel after stopping

I have a tab control.
Each tab control has a subpanel.
Each subpanel has a static vi reference attached to it for launching.
I would like the image of the front panel displayed in the subpanel after the program has finished running so that any information that was displayed is still present.
Is there a way to retain all the settings between run's?
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Attachments:
NeuroNetriX TestSet.vi ‏12 KB

When you say settings, do you mean controls? If so, you can right click on them and select Data Operations >> Make Current Value Default. That will keep the settings initialized how ever you set them up.
I believe you can use use the Get Front Panel Image VI Method node, similar to the way to run the VI. You can create one by right clicking on the VI reference wire and selecting Method for VI Class >> Front Panel >> Get Image. 
I've attached a code snippet of the node. If you want you can just drag the file into your block diagram and it should turn into code. 
Applications Engineer
National Instruments
CLD Certified

Similar Messages

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • How can I display the name of my refnum on the front panel?

    I am writing data to a file. To do this, I am using "Open/Create/Replace File" to prompt the user for a filename, which is then output to my VI as a refnum. I then write strings to this file with "Write to Text File".
    How can I display this filename (with the path) on the front panel after the user has input it?
    Michael
    Solved!
    Go to Solution.
    Attachments:
    refnum.JPG ‏45 KB

    Use the Refnum to Path function, in File I/O -> Advanced File Functions palette. You can wire this to a path indicator.

  • How to display the status of a SubVI on the front panel?

    Hi,
    I am writing a program to control an instrument through a serial communication port. The control and communication functions are integrated in a SubVI and they work fine.
    In the front panel of the main VI, I want to add some indicators to display the status of those controls in real time, such as using some LEDs to show whether the program is running in some loops of the SubVI, or use some indicators to show some variables in the SubVI.
    I tried using global variables, but I can't make them work in real time (or maybe I didn't do it right). The values of the global variables are actually changing on the fly, but the indicators on the front panel wouldn't reflect those changes until the program return
    ed from the SubVI.
    Is there a way to do this in Labview 6.0.2?
    Your earlist help is very much appreciated.
    Best regards,
    Hua

    Hua,
    I have attached an example in which a front panel boolean indicator is toggled in the subvi. Also, a front panel stop button is used to stop the loop execution in the subvi. References are passed to the subvi instead of the actual control values.
    Without seeing your code I'm not sure what was going on with the globals, but you had to have a data dependency somewhere which was keeping the code from running until after the execution of the subvi. The code must be totally independent of the subvi in order to run. Also, in order for the update to work it would have to be operating in a loop.
    Attachments:
    Main.vi ‏13 KB
    subvi.vi ‏20 KB

  • Display a particular array element on the front panel

    Hello,
    I was wondering if it's possible to change which element of an array control is displayed on the front panel from within the program.
    Here's why I want to do it: I have an array of clusters, each of which contains a set of controls.  The controls in each cluster specify a bunch of different parameters for a few different instruments that are being controlled by Labview.  The user changes all the values on the front panel before the program starts, then the program steps through the array elements one by one.  I'd like to be able to change the array's display so that the user can know which set of parameters is active (and thus what is currently in force) while the program is going -- otherwise the element that is displayed is just wherever the user left it last.
    Thanks in advance for any help.

    See also: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=317419#M317419
    LabVIEW Champion . Do more with less code and in less time .

  • How do reduce the space between the front panel and the display area

    I am trying to reduce the space between the front panel and display area but i am not able to reduce the space

    A picture would be very helpful in demonstrating what you are having trouble with.
    Lacking that, I will guess.
    VI Properties >>> Windows Size
    lets you define the minimum size of a FP window.
    Well that's my guess!
    Did I win?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

    Hi i am new to labview
    I want to extract data from a text file and display it on the front panel.
    How do i proceed??
    I have attached a file for your brief idea...
    Attachments:
    extract.jpg ‏3797 KB

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • How do I programmatically display jpeg files on the front panel

    Hi,
    I would like to be able to programmatically display various jpeg images on the front panel of a VI. I would mostly like to be able to display one image at a time and have the ability to programmatically change the image to different ones under program control. I found a picture indicator but not sure how to use if or if this is the best way. Thanks for any help.
    Dave Adams

    Yes, you can use a picture indicator.
    The attached simple codelet shows how to display a jpeg image on it (Make sure the image indicator is big enough).
    Let us know if you need help with the rest of the coding.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    DrawJpeg.gif ‏2 KB

  • How to: display large error note in the front panel?

    hi guys,
    When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!"  )
    How to do that?
    Thanks for your help.
    Solved!
    Go to Solution.

    Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

  • I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadshee​t. Any ideas?

    I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadsheet. Any ideas? Right now my data will collect one reading instead of continuously reading my IMU which displays data in a continuous stream.
    Thanks
    Attachments:
    Read_IMU_Drew.vi ‏21 KB

    Hi
    Your vi is in 2009 version, which i am unable to open in 8.6
    However, if you want your data to be saved in excel sheet, here is the VI
    Somil Gautam
    Think Weird
    Attachments:
    save to excel.vi ‏12 KB

  • Is it possible to display the color map of a 3D Surface plot on the Front Panel?

    This would be a very useful feature to include, especially if you are just displaying the top-down (XY) projection of your plot (otherwise there's no way to visualize the amplitude that a given color represents). I know that the Intensity Graph allows you to display the Z-axis color map, but I want to use the 3D Graph control for some of the other features it offers...

    I had the same question. After quite a bit of playing around with properties, methods, color ramps, viewing examples and reading a bit about it, I discovered a way to do this. Basically use the ColorMapValues and ColorMapColors properties from the 3D graph and modify them slightly and feed these into the ZScale.Marker.Vals[] on an intensity chart or the Scale.MarkerVals[] on the color ramp. See the attached example.
    I think the diagram is self-documenting and pretty darn simple. I have a couple of notes on the front panel that help explain the vi.
    Good luck.
    Attachments:
    3D_Intensity_ColorMap_Example.llb ‏51 KB

  • How can I simultaneously acquire and display an image on the front panel using a PCI-1424

    Dear friends;
    I want to use PCI-1424  , and labview 5.1 to capture the image,  But I can not find some functions in labview to capture, display and save the image.Can you be kind to share some examples or provide some information.
    Another question is how I CAN display the image in the front panel.
    thanks so much

    Hello yangshang,
    Thank you for contacting National Instruments!  To acquire images from the 1424 you will need NI IMAQ 2.5.1 or later.  This can be found HERE on our drivers download page.  One thing to note is that in LabVIEW 5 we only had the ability to view an IMAQ image as a pop up window.  This VI is called "IMAQ Windraw".  This will pop up a separate window that will display your picture.  If you need to view the picture on the front panel you can try saving the image as a file (BMP, JPG, etc) then use the LabVIEW Graphics and Sound VI's to Read a picture file in and then wire the picture to a picture control on the front panel.  Let me know if you have anymore questions.  Good Luck.
    Regards,
    Mark T
    Applications Engineer | National Instruments

  • How can I simultaneously acquire and display an image on the front panel using a PCI-1408

    I have to acquire and display an image directely in the front panel of a *.vi using a PCI-1408. i have to know all informmations about this image because I want to create a calibration system.

    Hi Paola,
    if you own IMAQ Vision you can just have a look at the examples that comes with your board or you can look at: http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/2abaefe05789961686256866007c0d22?OpenDocument.
    Without IMAQ Vision look at:
    http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/22474456534202b086256aff005fc4f3
    (or search at ni.com for "IMAQ Display without IMAQ Vison)
    Please mail me if you need further help,
    Michael

Maybe you are looking for