LED-alternative for 24-inch cinema display?

With my month-old Mac Pro 8-core, I cannot use a 24-inch LED Cinema Display, because the Mac does not have a mini display port. No matter how much I would like to buy the LED-display, I'm not willing to invest an extra 315,- euro's to get a new (noisier) graphics card with mini display port to replace my GeForce 8800GT. Does anyone know a good LED-replacement for the 24-inch Apple display? It has to be an IPS-type panel, not TN.

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update: 
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Similar Messages

  • Analogue input for 30 inch Cinema Display?

    Hi there,
    I'm looking at getting a 30 inch Cinema Display and just wondered if there was a way to connect analogue sources (such as an xbox 360 for example) to the display. I guess what would be needed is a female DVI -> female AUX adaptor but I'm not sure if such a thing exists or if it would work the way I think?
    If not, do you have any recommendations for good 30 inch displays that do have analogue inputs?
    Thanks very much
    Sam

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • Is there a versa mount for 30 inch cinema display?

    is there a versa mount that fits my 30 inch cinema display? I bought it when they first came out and now I want to mount my monitor to the wall.

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • Repairs for 30 inch cinema display

    How can I find out if my 30 inch cinema display can be repaired?
    Thank you

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • Proper video card for 23 inch Cinema Display?

    Hey everyone...
    I recently bought a 23-inch cinema for my G4. Upon the advice of Apple, I purchased a ATI Radeon 9200(128mb) vid card to power it. Since installing the card, I seem to be having memory issues with my system, such as: memory lag with files in Photoshop and burning errors with my cd burner(i.e. buffer underrun errors), both of which I didn't have before. I guess what I'm wondering is, was this video card appropriate for this moniter? And also, what could be causing this ram conflict. Any suggestions are greatly appreciated. Thanks for your time!
    -ian-

    To use the FireWire ports on the display you will have to plug the display's FireWire cable into the FireWire 400 port on the MacBook Pro. If your MacBook Pro has a FW 800 port, you could use that for your disk drive with a FW 800 to FW 400 cable, or a FW 800 to FW 400 adapter. You should be able to use the display's FireWire ports for disk drives or cameras, but some brands of cameras don't work well with other devices on the FireWire bus.

  • Help I need a "power brick" for my 30-inch cinema display!!!!!

    I recently moved and lost my "power suppy brick" for my 30-inch cinema display..How do I get another one?? The Applestore wanted my old one to do a even exchange?? But I can't do that...And they don't sell the product as a replacement. I'm stuck with a 2 month old display I can't even use! Any ideas???
    Sony Vaio   Windows XP  

    If the display is covered by AppleCare call 1(800)275-2273 and ask for a replacement power adapter. They will send the new unit first, and you are supposed to return the bad unit. You give them a credit card number when you order the part, so they can charge you, if for some reason they don't receive the old part.

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • Random screen blackout 2009 24 inch Cinema Display... HELP.

    Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

    Hello,
    I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
    I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
    Does anyone know if this is possible? Or does it only work with another Cinema Display?
    I'd appreciate any help received.
    Thanks,

    Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
    That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
    I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
    That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
    But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
    Not unless the PC has Thunderbolt.

  • My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

    I have a 30-inch cinema display connected to a Mac Mini.  When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time.  If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once.  It works fine once it on and displaying.  Anyone else seeing this?
    Rocketman

    Hi Rocky Rakoon,
    Thank you for your post, and welcome to the Apple Support Communities.
    I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    For more troubleshooting directly related to the Cinema Display, see this resource:
    Apple Cinema Display: Troubleshooting steps
    http://support.apple.com/kb/HT2810
    Thanks,
    Matt M.

  • 32 inch Cinema Display turns off repeatedly?

    32 inch Cinema Display has taken to turning itself off afer 30 minutes operation.
    Can this fault be repaired or should I be looking at buying a new display?

    I have a 20" Cinema Display connected to an early 2008 MacPro. After years of service the monitor suddenly started going black, quite randomly. It would even happen part way through playing an edit from FCP. Strangely audio would be maintained though picture was lost. If I switched monitor power off and on again I would usually restore video image. Sometimes I had to do this power cycling repeatedly.
    Looking through other posts it seemed a failure of the internal power unit was the most likely cause of the problem. But replacement seemed risky and not guaranteed. I considered buying a new monitor (probably a Dell UltraSharp since the Apple monitors are now so expensive).
    Then I tried something else. In System Preferences and then Energy Saver I set the Computer Sleep slider to 25 minutes (I had always previously kept it on 15 minutes). Bingo! Problem solved.
    Maybe this won't work for everyone but it certainly saved me some cash outlay. For now.

  • What happened to the 30 inch Cinema display?

    What happened to the 30 inch Cinema display?
    I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
    I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
    Any suggestions, for a 30 inch display?

    No suggestions, apart from changing to a non-Apple display such as a LaCie one.
    I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
    1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
    2. we have gotten used to 30" and do not want to downgrade.
    I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
    I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
    Suzanne

  • MacBook Pro W/30-inch Cinema Display

    Is there a working solution for this yet? is it possible to use the 30 inch or even a 23 inch?
    If so how?

    Let me better word the question.
    Can Windows XP Support the 30 inch cinema display at full resolution like in can in leopard via boot camp? Or a 23 Inch?
    Thanks

  • MBP3.1 can't run 30-inch cinema display

    I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
    I've had  Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
    Has anyone else had this problem?

    You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

  • Optimum extension cabling for 20-inch Cinema

    I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
    Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
    Do I have to extend these cables separately?
    I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
    Can firewire & USB be extended 2-3 meters without ill effects?
    My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

    Thanks. Your reference puts me on the right trail.
    The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
    Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

Maybe you are looking for

  • Monitors with Gradient Problems?

    Hi All, Further to my recent post "monitor screen display terrible!" Finding a monitor without spending a lot with excellent picture quality is proving differcult! I have tried a Philips 22" monitor Model 220CW9FB and now a BENQ T900HD 18.5 WS monito

  • How do I set the Launch window size (from launch from an LMS) in Captivate 5.5?

    When my project launches from the LMS, the lauch window is smaller that the actual project size and requires the user to resize the window to see the whole project. My LMS administrator tells me that the launch window size is not controlled by the LM

  • Supplier ******* not intended for purch. org error in S Cart

    Hi - We have set up a Dev SRM system using Extended Classic Scenario When we create shopping carts and we try to assign a vendor we get message Supplier A111111 not intended for purch. org. The vendor exists in our ECC 6.0 system under purchase organ

  • Thumbnail image problems continue...

    Within a few minutes of opening FCPX the thumbnails disappear on the timeline and only one Thumbnail image at a time appears in the browser as I mouse on the clips. I have been able to fix this by trashing prefs and cache files but the problem never

  • How to install Leopard in my iMac if it has no DL-DVD player?

    How to install Leopard in my iMac if it has no DL-DVD player? My eMac is: eMac G4/1.25 (USB 2.0) with 2GB RAM