LED constant red after opening SMS message

Hi, i have the blackberry pearl 8100, i had a difficulty with this before bu after upgrading it would not flash the LED it would flash if not open but once open and sent it would stay red.. howcan i fix this?

Welcme to the Frums!
Try removing your battery. Replace after 30 seconds - allowing your phone to reboot.
Nurse-Berry
Follow NurseBerry08 on Twitter

Similar Messages

Applications closing immediately after opening Text messages not delivered

It there any way to restore the phones applications when they start to malfunction, instead of doing a complete system restore. As the application are closing immediately after opening. I've tried deleting and restoring them.
Also text message seem to get lost when doing a system restore. They don't just arrive when its finished. They never get delivered. Caused a few big problems for me but I'll only do it at night now. Has anyone had the same problem.?? Thanks.

It's in it 7th hour to restore
and it hasn't started with the photos
music yet. That cant cant be right??? Can it??

Opening SMS messaging - V.V.V slow!!!!

Hi guys
Could you help? I've updated my firmware to V11.018 and I'm still having problems writing and replying to text messages. When I try to reply to a text it takes about 40 secs to open and empty text for me to write in.
Do you know how I can fix this??????
Solved!
Go to Solution.

I had this bug in that version and solved it by resetting my phone.
Enter *#7370# on the phones main screen. This will wipe all user data from the phones memory and you will need to reinstall any programs or themes that you have added.
A new firmware version (v12.043) was released yesterday that significantly boosts the speed of the phone. If that update is available to you make sure you install it. It may even solve your problem without the need to reset.

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved" ones before I write the new one. What to do to finally/definitely delete the save

I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?

sorry it's ios6

OS 5.0, Storm: URLs in SMS messages stop being clickable after the thread is opened the first time

I'm running 5.0.0.328 on a VZW Storm 9530.
After upgrading, I noticed that URLs in SMS messages and e-mails stop being clickable after a certain time. I'm not sure that this is so much a time issue as it is one with just getting X number of messages then breaking, but it works like this:
Battery Pull occurs
Storm reboots
Look at SMS messages, URLs can be clicked, opening them in the Browser
go on about my day
Get more SMS/eMail messages
Look at SMS messages, URLs can NOT be clicked. Have to be copied/pasted into browser to view.
Battery Pull occurs
Storm Reboots
I can again click on URLs and open them in browser
And that's how it goes. Initially, after a battery pull, the URLs in various SMS are underlined. Clicking them opens them in the browser. OR, I can touch them and hit the BB button, and select Open Link in Browser from the menu.
After some more testing, the problem appears to be related to the threading of SMS messages.
My test case is twitter. ALL my twitter messages are thrown into a single thread (I do NOT want this, by the way, I want individual SMS messages, NOT threads of them). SO let's say, for example, I have 25 SMS messages in the twitter thread. Immediately after the battery pull, I can open the thread, and after a moment, all URLs are underlined, clickable, and if I touch/hold for a second, highlighted and can be opened via the BB menu.
After exiting that thread to do other things, and then coming back to that thread, I have found that OLD SMS messages in the thread (the original 25 that were there when I did the battery pull) are still underlined, clickable, and so forth. However, any NEW messages added to the thread after I opened it the first time, are NOT clickable, NOT underlined.
My theory at this point is that the code that parses the SMS messages in a thread and then underlines the URLs making them usable, only runs that first time, and either does not run, or fails to run, on subsequent openings of that SMS thread.
Thus, if the messages were NOT threaded, then the code would run when each individual SMS was opened, eliminating this problem. OR, having that code run EVERY TIME a thread is viewed, to ensure it does the underlining/grabbing of URLs for new SMS messages.

You're in a user-to-user community support forum.
Do you have a question?
If so, let 'er rip.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

After upgrading my iphone 4 to io6 i started loosing the historical sms messages from some senders including new ones received as soon as I open the message app. I am not happy with io6. please advise how i could downgrade to io5.1.1.

I have read a number of other threads regarding the loss of Messages, however, I am not aware of the reason it is happening. Check on the right side of this message under more like this and see if you can find an answer.
As to your question about downgrading software, there is no Apple supported method for downgrading software.

Premiere CC "Not Responding" Message after opening

Hi,
Two of my projects (one last week that I managed to get open) have crashed. They open up on CC, then the project loads and I can see everything fine. However, when I click anywhere, Premiere goes white and it says "Not Responding" on the top. I tried opening my previous files but they crash as well.
The first one I fixed by renaming my footage files (to break the links), opened it, then re-linked. However, this doesn't work on the second project.
When I press Ctrl + Alt + Delete, then go back to my desktop the 'white' and 'not responding' disappear but once I click premiere, it reappears again.
What could be causing this? Since there are no error files, I can't figure out what's going on.

More information:
1. Premiere Pro CC for PC
2. Windows 7 64bit
3. Source Footage (7 5D cams, and 1 RED cam - shot in 3K)
4. No error message, just white screen and "Not Responding" at the top.
5. This occurs right after opening up the project (project loads, and I can see everything, but once I click a window, everything turns white).
6. No other programs running.
7. No third party codecs installed
8. Hardware: Xeon E5420 processors (2 quad core), SSD main hardrive, 2 Tb HDS x6, 8 gigs RAM, NVIDIA quadro FX 1700
- Yes, I'm using Mercury Playback Engine

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS3276 My e-mail service is very slow. Even if I rebuild after opening a new message it resorts back to it's very slow service, any suggestions?

My e-mail very very slow to download and open. I have tried rebuilding my e-mail account and after opening one or two messages at a faster speed, it slows back down. Orginally when I purchased the computer and set it up it was great.

Thanks for the additional details msims1985. Verizon Wireless does not throttle however, we do implement network optimization. You can view more information here http://vz.to/17U9bZd The good news is 4G devices are not impacted! Per the details you provided it seems as if it is a device issues. When you received a replacement did you receive a replacement sim? If not, I suggest a new sim. You can receive a sim at a direct store location, online or I can send one. Please share. Thank you.
Tominque B.
Please follow us on Twitter @VZWSupport

HT5622 My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Message window won't open after double-clicking message in list

When I re-launched Mail, I suddenly lost the ability to open a message by double-clicking it in the message list window. I can view the message in the preview window at the bottom of the list, but without opening the message itself, I seem to lose the ability to reply, forward, etc.
Coincidentally, in case the problem is related, I also noticed that Safari no longer opens a window after launch. Going to "File" in the menu bar and selecting "New Window" produces nothing.
Anyone have a clue about fixing these?

Read the following article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
In particular, be sure to verify/repair the startup disk (not just permissions), and to read this as well:
Side effects of System cache cleaning
In addition to the utilities mentioned there for cache cleaning, you may also consider OnyX or Cache Out X, which are free.
More specifically, this could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
And this is how you should proceed to reset Launch Services with OnyX, for example:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

LED constant red after opening SMS message

Similar Messages

Maybe you are looking for