LED error codes to the HP ZR2740w monitor

I'm looking for the LED error codes for the HP ZR2740w monitor. The blue light flashes on the front of the monitor and thats all it does, so i'm trying to figure out what it is saying is the issue. Thank you for any help or direction you can give me. Thank you

Please Click Here to find more information about troubleshooting your HP ZR2740w Monitor
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Similar Messages

HP Pavilion dv4 Notebook, LED Error Code blinks everlasting

Hi
When I turn on my Pavilion dv4 Notbook the screen is black, the powersupply LED stays on, the Wifi LED is orange, Speaker LED is orange too and the volume adjustment LED is white.
The LED's near capslock and numlock blink. There is this site with several different LED error codes from 1 to 6 blinks. But mine blinks forever without stopping once it has started.
What does this mean and how can I fix it?
Thanks, John

Hello again trishjax,
Thank you for the update on your issue is has helped. I agree with you based on what you just posted it definitely sounds like something has broken loose of the solder on your computer. The only thing I can suggest is you either contact HP Technical Support for repair options, or go to a local computer repair shop and have it looked at. If it is a hardware issue this is really your only option if you do not know how to do it yourself.
I know it was not the answer you were looking for, but I believe it will help you with your issue. I would like to thank you again for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Replaced CPU same LED error code for CPU problem continues to occur

I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.

atlantrace wrote:
I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.
It's either a corrupted BIOS or motherboard problem. Since you've already replaced the CPU, the only other option is to replace the motherboard.

Sat Pro A40: LED Error Codes

I have a Sat Pro A40 that worked ok for a while then started locking up. Now at power on the power LED flashes a code but I cannot find the code anywhere.
Code is "short long short short short short short long"
Any one got an idea whet this code is ?
Steve

Hi
Unfortunately I have not found any public documents about the led error codes.
Only the ASP has documents about the error codes and he should know what it means.
As far as I know short means 0 and long is 1.
In this case the code means 0100 0001
I would recommend to contact the ASP for the detailed description.

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Error code: 0x80070035 The network path was not found

"Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".
Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
All strarted and running in Automactic mode.
Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
Someone please help !

Hi,
In addition, I would like to suggest the following:
Enable NetBIOS over TCP/IP:
1.    Go to “Control Panel\Network and Internet\Network Connections”.
2.    Right-Click on the connection and choose Properties.
3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
4.    Click Properties, and then click Advanced.
5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Thanks.
Nicholas Li - MSFT

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

Windows Server Essentials 2012 error code: 2147942403 The system cannot find the path specified

Running Windows Server 2012 Essentials with an external usb 3 drive as a backup device. Using a Vantec hx enclosure with a WD Red drive. Last night the Dashboard saw the drive with about half the 4TB available for backup. A.M., I get "error code:
2147942403 The system cannot find the path specified".
Going to the server desktop, I see a message indicating that the usb device malfunctioned. unplugging it, and plugging it back in, I now have it available via the dashboard.
This has happened a couple times with two different drives in Vantec hx enclosures.
A couple possibilities come to mind:
the enclosures may both be bad...
there is some problem with the system software and external usb drive.
Thoughts?
Suggestions for external enclosures?
Thanks!

Hi,
According to your description, my understanding is that you cannot backup the Windows Server Essentials 2012 and got "error code: 2147942403 The system cannot find the path specified". You found the usb device malfunctioned.
Can you backup the server when you unplugged the usb device, and plugged it back in? If you can backup the server when you replug the usb device, you need to engage the vendor to resolve the hard drive issues.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Where to find LED error codes for Portege 4010?

Hi,
My Portege 4010 isn't working, and the AC indicator is blinking an error code (either 0xA or 0x50 depending if I should interpret the first bit as least or most significant). I've tried searching, and I've found a fairly detailed guide that includes these error codes for the Portege M100 and M300 (at http://tim.id.au/laptops/toshiba/portege%20m100.pdf and http://tim.id.au/laptops/toshiba/portege%20m300.pdf) but I can't find anything for the 4010. So can anyone give me a location (ideally official Toshiba) for a document detailing the meaning of the error codes for my model?
Thanks,
Jes

See for 'REP messages' in help menu.

IPS 4270-20 error codes under the hood 01 and 51

I have no console access and no mgnt port access... trying to get into a spare box we have ... I turn it on , and I have no access ??? Is there a special or different DB9 cable I need??? Is it possible the console and mgnt ports have been configured to not allow access , or this unit is DEAD again I have two error codes on the LCD display one reads 01 then flashes 51 and back and forth any help thanks all

If your unit has a serial port, you can connect to it in multiple ways. For more details specific to your model, see the following link (steps 5 and 6):
http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html
Regards
Farrukh

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.

I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.

WidgetBrowser installation fail with error code 7 (The storage control blocks were destroyed.)

Client machine is Windows 7 x64.
I am using AdobeApplicationManager tool to extract sources from original Set-up.exe.
Extracted sources contain Build and Exceptions folder. The Build directory contain Dreamweaver.msi and Exceptions contains AdobeHelp and WidgetBrowser sources.
After silent installation of Dreamweaver.msi, i'm tried to install WidgetBrowser but it return error code 7(The storage control blocks were destroyed).
I tried on different windows 7 x64 client but still its not working.
Please help.

Hi,
I have the exact same problem, except I am using 32-bit Windows 7.
Thanks
Rosy_55

HT201413 i have tried resetting my iphone 4 but keep getting an error code at the end (34)

I HAVE AN IPHONE 4, I HAVE TRIED RESETTING THE PHONE BUT KEEP GETTING AN ERROR CODE AT THE END OF THE RESET ie;34, ANY IDEAS PLEASE

I'm not certain thats the problem. I stopped antivirus, I set screensaver to NOT trigger and yet it took me FOUR DAYS to completely sync my ipod touch. Stupid me decided to try it with the iPad and guess what...it's been three days and STILL timing out.
I don't think Steve Jobs died; I think they upgraded him to iOS5, he crashed and they could not restore him.
THIS UPGRADE *****. They rushed it out the door to get the fancy-dancy voice command thing on the iphones and yet that feature does not help ipod or ipad users.

LED error codes to the HP ZR2740w monitor

Similar Messages

Maybe you are looking for