LED flashing red.

Hey, i have the blackberry pearl and i just recieved it from a friend. I was doing something with my desktop manager and all of a sudden my phone shut off and then i took the battery out unplugged my phone and tried repowering it but it wouldn't do anything. Now it's sitting on my charger with no battery but is still flashing red. What can i do to fix this?

Welcme to the Frums
http://supportforums.blackberry.com/rim/board/message?board.id=Bold&thread.id=8100
Nurse-Berry
Follow NurseBerry08 on Twitter

Similar Messages

My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
Red for message or applicaiton notifications.
if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Z10 - blank screen + led flashing red

On connecting my new Z10 with BBlink, was given a an option for available upgrades. On upgrading the screen went blank and LED flashes red - 3 short 2 long - blank and starts the sequence again. Am unable to restore, restart or anything. Help wanted please email.
Solved!
Go to Solution.

Glad, that you were able to resolve the problem, Hopefully future releases of the BB link would work better with Mac's..

Playbook won't turn on, boot, or charge. LED flashing red.

Playbook won't turn on, boot, or charge. LED flashing red.

Try this, while connected to your charger. Press and hold the Power key, up and down volume (-/+) all three buttons simultaneously, for about 10-12 seconds. You should the red LED blink and that should allow a reset of the PlayBook and to power up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Pearl 8100 randomly shuts off and the status LED flashes red

My pearl was reciently unlocked and changed from AT&T service to t-mobile. after this switch the pearl started having fits of rage where it will turn off randomly, weather any keys have been hit or even if it is idle. the device LED then flashes red, sometimes once, other times it will flash once every 4 seconds for hours. then it will randomly turn back on either to the exact screen it had been on before it powered off or it will reboot completley and start the normal start-up procedure and varify security checks just as if the battery were removed. i tried removing the batery and leaving the phone disassymbled for a few nights but in the morning the plague is back and unrelenting. sometimes all i have to do it pick the device up and it will shut off. other times i will be plugging away with it for 20 or so minutes on the internet and then it will die suddenly. it also cuts out in the middle of phone calls. if anyone can help,please let me know.
blackberry 8100 v4.2.1.96

Is it a new phone? If it's less then a month old see if you can return it, otherwise you can try reloading the OS.
So if you're willing to try that, do the following.
First download and install the Desktop Manager from here (4.6 without Media Manager is recommended): https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Next you can use the Backup and Restore feature present in the software to make a backup of all the data on your phone.
Next download and install the handheld software from here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Afterwards try reloading the OS by connecting the device to your computer, open the Desktop Manager, then go into the Application Loader. This will open a wizard that steps you through reloading the OS onto your device. More detailed steps can be found here:
http://www.blackberry.com/btsc/KB03485
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Pxi 8360 power led flashes red

I have a PXI 8360 MXI Express board mounted in a PXI 1050 chassis. I am seeing the power LED occasionally flash red and I lose communication with the computer. The power LED will return to solid green status after a few minutes but I am not able to do much with NI DAQ to test the system since it has failed self test. The suspicion here is the power supply may be bad but how do we check that.
The system with the computer has worked well over the past several years and we are concerned about possible damage from a power fluctuation that happened here around Christmas time.

Hi Xavier,
The red flashing light is on the PXI 8360. I have not seen any flashing lights on the chassis.
The modules present in the system are
PXI 8360 MXI Express
PXI 4071 7 1/2 digit flex DMM
PXI 4110 Programmable DC power supply
PXI 4110
PXI 4110
PXI 8252 1394 Host Adapter
TB 2627 multiplexer terminal block
PXI 6289 M series multifunction DAQ
SCXI 1306
SCXI 1303
SCXI 1303
SCXI 1300
So far all testing has been done with all modules installed. Another person has tried reseating all modules to see if that would fix the problem but it does not.
The system will work fine for a few hours and then the blinking LED will begin and somewhere near that time the communications fail with the computer. The light will blink for a few minutes and then will return to solid green. Once the error has occurred it seems that the only way to re establish proper operation is to shut down the whole system, PXI chassis and computer, and restart. I saw one time where the power LED on the 8360 went from flashing red to solid green when the computer was turned off.
The computer is a Dell Precision 690 with PCIe 8361.
I will be opening up the chassis hopefully in the next day or two to check fuses and voltages where I can.
Bill

PXI Chassis Power LED Flashing Red: What to do?

My NI PXI-1042 keeps blinking red the Power LED. I know it means the voltage is out of the specs. What to do?

FilipeTaveiros wrote:
But it is not continuously red.. It is blinking red.. Thanks for your help. Anyone?
This is copied right out of the manual:
The chassis power switch has an integrated LED. This LED indicates one
of three different conditions:
• If the power switch LED is steady green (not flashing), the chassis is
powered on and operating normally.
• If the power switch LED is flashing green, the air-intake temperature
has exceeded the chassis operating range.
• If the power switch LED is flashing red, the power supply outputs are
not within voltage regulation requirements.
You either have a power supply problem, or you are loading it down with too many modules. Try running it empty and see what the light does.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Led flashing red 5 times and phone unresponsive

Hi can anyone help me??
After putting my phone on charge this evening it has turned itself off and now the LED is just flashing red 5 times in a row like 1 .... 2 3 4 5. Can't get any response from it have pulled the battery and have tried connecting it to the pc but no joy. Its a Z10 only 4 months old any ideas how to fix it?

Contributor 'tezytan' is correct. Plug your phone in to your PC and open BlackBerry Link. Once your phone is recognized, you should be prompted to reload your OS. Due to your phone having a corrupt OS, it might not be recognized by Link. If that happens, leave it plugged in and remove it's battery for a few seconds; once you replace it, Link should connect with it.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

K8N Neo4-F - D-LED Flashes Red through EVERY step.

I turned on my computer today and it would not boot. The D-LED shows it flashing Red for each step, then it rests on Floppy Initialization finally after one long beep. It refuses to boot up. Here are my specs:
MSI K8N Neo4-F Mobo
eVGA GeForce 6600GT
2x 512MB Kingston HyperX RAM
Western Digital SATA HDD, 300GB
Thermaltake PSU, 400W, possibly 450W, not 100% sure right now.
AMD 3800+ X2
I've replaced my HDD, Video card, USB Devices, and RAM with no luck. When removing my processor, I no longer get the long beep when the processor is out, which is to be expected. Now, I need some help here before I go blowing my money on the wrong thing. Does this sound more like my processor is fried, or my motherboard?

I am in the same boat. Computer worked fine until yesterday when it started giving a single beep and just spalshing the core cell screen up.
My computer specs are nearly identical to yours and I've been replacing things like mad. Even went so far as to try the items on another computer and had no problems, beginning to think it is the motherboard itself and not anything else.
Good luck on yours!

4 leds flashing red/amber, cpu dead?

yea, so i was just moving some cords around inside my case while it was on, then my computer just shut off. wont boot, the bracket on the back is flashing 4 red/amber lights. i tried clearing the cmos, taking out the battery for 20ish minutes, no luck. i got a amd 3200+, k8n neo4 plat mobo, and i also have a arctic cooling freezer 64 on the cpu. is it dead, or is it the mobo?

Quote from: MGP on 07-May-06, 05:56:27
You could have shorted something out.
Disconnect all drives data and power cables, remove all add-in cards and any USB deivces, remove keyboard and mouse. You want to start with a basic setup, cpu+fan, 1 stick of ram and graphic card, this is all that is needed to boot a PC. Now oull the P/S cord and push your case start button to discharge any remaining current and then clear your cmos. Plug the P/S back in and try to boot with min setup, lets us know what happens.
Follow what MGP says but put this at outside casing just put the anti-static plastic and test it without using the case wired. Just used the jumper to short it and see whether it boot or not? Gd luck

Xperia Z1 won't turn on, LED flashes red

Hello I've left my z1 on charge over night gone to check my texts and it will not turn on just a red light flashing. I've tried the whole volume Nd power button still not turning it on .... Should I just take it back to the store

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear. I suggest that you disconnect the phone from the charger and then hold the ON/OFF button + volume up(+) for 5 seconds. Without trying to power the unit on, connect it to the charger again and let it charge for 1-2 hours before you try to turn it on.
But if the issue remain, I suggest that you contact your retailer or that you contact your local support team to get information about how to proceed with this in the best possible way:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Spa 2102 with power led flashing red

anyway to fix this? cannot access the unit via pc or ivr. BTW this is the second unit that has done this in the last 2 months

Im just guessing but sounds to me its the firmware or its not configured right.
Thats all i can think of at the time.
I hope you the best in gettin it fixed.
The default IP address for the adaptor is 192.168.0.1
Push that in the address bar on the brower.
Try the user name....user
The the password.....admin
Message Edited by sjl24 on 07-23-2007 08:19 AM

Possible 8530 brick, HELP!! Just flashing red LED, Two then Three

I may have bricked my fiancee's phone
I connected it via USB cable to my PC, the PC responded as if it were a new device and started the driver install etc, it said the process was finished. The screen on the 8530 showed the computer hourglass twice on a black screen, and then went completely dark. The only sign of life from it is the LED flashing red, two then three flashes. The computer doesn't detect the device and neither does the BB Desktop Software.
I've pulled the battery, let it RIP, then put it back in and the same. Same with the battery out and the USB cable in. Same on wall charger cord.
I've Googled it to death and nothing has helped. Any and all suggestions are welcome, she's threatening severe bodily harm and more if I can't resolve this.... At the very least can any tell me what the phone is saying through the LED? It flashes red twice quickly, short pause, then three quickly, then repeats after about 3-4 sec.
HELP!!!

Hiya!
You can use JL_Cmder to wipe/ reload the OS to the device. Go here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work for whatever reason, try here:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
See if that gets it.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Blackberry LED light keeps flashing red

Yesterday Vodacom Care gave me a new Q5 device - i had a Q5 for 2 months and the phone just went dead - so they replaced it . Now my Q5 LED light keeps flashing red and it's a NEW PHONE ??? - make it stop please !

Hello,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps below to try and bring the BlackBerry Q5 back to life:
Ensure that BlackBerry Link is installed on the PC or Mac OS
Ensure the computer has an internet connection.
Launch the BlackBerry Link Software.
Note: A backup of the BlackBerry device should be tried before a reload.
Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
Connect the BlackBerry device to the computer.
When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device. Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
If the issue still persists, then I suggest contacting your network service provider for repair options.
Let me know if you have any more questions.
Cheers.
VIA | ViciousFerret
http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Dell switch 8024F - Front left LED is flashing red - no connect terminal

Hello,
I have a DELL 8024F switch not connected console me.
The console cable is correct.
The LEDs on the switch are as follows:
LED right power source is green.
Left power source does not exist.
LED fans are green.
Front left LED is flashing red.
What can happen?
I have inserted several SFP + and are led as if they were not inserted.
I get the feeling as if you did not initiate the boot process.
Any suggestions?
regards

Hi,
The blinking LED typical means a non critical error, but if you can’t connect to console and it doesn’t recognize any SFP+ transceivers, it could be a more serious error. If you unplug it and then reconnect power is there any change? Have you reseated the power supply and fan modules?

LED flashing red.

Similar Messages

Maybe you are looking for