LED Indicator When Charging

When I first got my device the LED flashed on and off (green and red I think) indicating charging in progress. Then a few days ago this has ceased happening when I charge the device, no LED flashes nor then stays lit when fully charged!! Any thoughts??

dacarter wrote:
My daughter's 360 is doing the same thing. Was there any solution to this issue? I'm thinking there's a problem with the micro USB port.
This may suggest a hardware problem and I do advise sending the device to a Nokia Care Centre.
To locate a Care Point near you, please use the locator which can be navigated from this page http://www.nokia.com/global/support
Good luck

Similar Messages

  • Battery indicator when charging

    When I charged my Ipod, and I turned it off, the big battery indicator always show the charging mode in evolution, even when it charged completely. I must to unplug it to verify the charge was 100%. When I plug it after that, the indicator show 100% charge batt.
    Is that normal ?
    (excuse my bad english)

    Well have you updated to the Latest update for the one m8 it is out and it's shown up on mine,
    My one m8 is charging right now I have it off the battery indicator in the Display is Horizontal and is showing 53%  &  the Amber Light is glowing, if you phone is not off try shutting it off use the charger that came with the phone and let it charge at Least 30 min. see what it does let up know on here..

  • ! over the battery indicator when charging.

    When plugged in my HTC One M8 is showing an ! over the battery and not charging. I've restarted and reset the phone but it continues to show up. Is there a problem with the battery? Any suggestions?

    Well have you updated to the Latest update for the one m8 it is out and it's shown up on mine,
    My one m8 is charging right now I have it off the battery indicator in the Display is Horizontal and is showing 53%  &  the Amber Light is glowing, if you phone is not off try shutting it off use the charger that came with the phone and let it charge at Least 30 min. see what it does let up know on here..

  • Why my ipad mini no battery indicator when charging it off

    Pls help me?

    IT is maybe from the plug , maybe it is loose or something! It happens sometimes to everyone so it is better to check that every thing is stable! And maybe it is from the ipad charging hole it self, did you drop it or any thing ? Because there is a problem and you need to fix it ,,,, hope i helped you

  • My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

    My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

    Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
    Red for message or applicaiton notifications.
    if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Green LED when charging

    Hi all,
    I wonder if you can help me, I charge my phone in its dock every night in the bedroom. I have got it to turn into bedside mode when charging. Trouble is if I keep then phone on I receive notification sounds when recieving emails etc. If I turn the phone off and docked I get a solid green light which lights up the room when fully charged. So any info on the following:
    1.Can I disable the green LED when charging?
    2. Can I configure Bedside mode to go into silent?
    3. Can I schedule silent mode to come on/off at a certain time?
    Thanks in advance 
    Creeky 
    Solved!
    Go to Solution.

    I have my bedside mode configured to turn off the wireless radio. That way, I do not get any emails until I turn on the wireless radio (by exiting bedside mode).
    another thing you can do, is not use the charging stand, but using the cable plug in and turn your phone upside down so the light is pointed down and not up.

  • When charging, battery indicator not moving, it is just staying red

    when charging my ipod there is a connection but after at least an hour, the battery indicator is still red but somehow it says that there is a connection. What do you think the problem is?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • [L530] Battery LED indicator turns off when plugged in

    Hello. When I plug in power supply, the back battery LED indicator turns off, so after closing lid (leaving power on) I have no information whether the PC is on or off (the only back indicators are battery and sleep). Is there any possibility to change the bahavior of this LED?

    ALSO, the fans are really loud when the power adapter is unplugged. Not grinding or anything, just like it is working double as hard. I unplugged it, held down the power button for 10 seconds, and it restarted ok. Caps lock light works and now i'm going to plug the power adapter in...screen goes black, illuminated keys turn off, but the backlight is still on. Plugged in, it is completely unresponsive.

  • When charging from a wall socket the iPod does not show the battery charging or the flash indicator in the charge level icon . Both these do appear when charging from my Mac.   Is this normal?

    When charging from a wall socket with a mac recommended charger, the battery icon in the top right hand corner does not show the flash sign and the running battery level is also not shown .   Is this the normal situation?

    Hi,
    so when you hold the menu+select buttons it won't reset - show the apple logo?
    If you can get the apple logo to show, then press the select and play buttons to put it into disk mode.
    What happens when you connect it to the computer? Sometimes, you can see the ipod in disk management if you open itunes before connecting the ipod. Once itunes is open, select Edit/preferences. This will keep itunes busy so that you can read the ipod in disk managment.

  • Satellite A500-14k - HDD LED indicator always blinking

    Hi
    First sorry for my bad english
    I'm french and i recently bought a Toshiba Satellite A500-14k ( http://fr.computers.toshiba-europe.com/innovation/product/Satellite-A500-14K/1072806 )
    I've got a little problem with this notebook and i don't know if someone has a solution
    The LED indicator of the HDD is constantly flashing (1 blink per second) even in safe mode. I checked some forums and i have learned that there was something to do with the cd /dvd autorun function of the CD/DVD recorder.
    If the autorun function is deactivate in windows registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi ces\CDRom and key value changed from 1 to 0) the blinking disappears but i can't access any of my CD or DVD data ( the media are marked as blank). However, audio CD and video DVD are working except that they can't be started automatically.
    The same thing happens if the CD/DVD recorder is deactivated in the device manager of the control panel : the led indicator has a normal activity.
    I would like if this problem occurs with other owners of this product and if there is a solution to use normally the recorder without this flash
    Thanks

    I don't have A500 but A300 and I cannot say for sure why this happen and what kind of HDD activity is in progress but what you can try is to remove some Toshiba preinstalled stuff like TEMPRO or preinstalled antivir application.
    When the notebook is brand new first days many updates will be installed and in the background is always some activity. Is automatic update disabled?
    Try also to remove TEMPRO. This tool is permanent active and search for updates.
    Try simply to optimize preinstalled OS and watch carefully if something will change. I do it always after clean OS installation.

  • Ni-can filter ID with led indicator

    Hello,
    I am currently using ni-can usb 8473s and combine two examples vi to one. Can_receive.vi and Can_data filter.vi.
    I can filter the ID with no problem but would like to add more than one filter IDs, also have a led indicator to verify that it filter the individual ID.
    Also when I write to CAN my ID does not show up on the array output when it reads all the CAN signal.
    Any help would be appreciate.
    Thanks
    Attachments:
    Frame - Basic.llb ‏38 KB

    It's not that I get an error.  When I set up a message in MAX, there is no way to send the message without a data channel, that I know of.  If I create a channel within a message, MAX does not like it since I'm specifying 0 bytes of data in my message.  If I specify a channel to write within LabVIEW, would it just send the message and 0 bytes of data, even though MAX gives me an error?  A sample .ncd file is attached.
    Attachments:
    test.zip ‏1 KB

  • Bedside mode when charging

    Is there a way to stop the Z10 going into bedside mode when it is on charge, or otherwise to suppress the no notifications in bedside mode.
    I don't charge my phone at night but during the day when I am working, but that means that currently when I'm charging the phone my notification are blocked (not even the red LED flashing)
    Solved!
    Go to Solution.

    The Z10 won't automatically go into bedside mode when charging. It is done manually either from the clock app or with the bed icon at the top of the lock screen.
    Rad Systems apps on BlackBerry World
    Follow on Twitter, Facebook or BBM Channel: C0006BB16
    Tips to improve your BlackBerry 10 battery life (and avoid overheating)

  • Can't find Led indicator

    HI,
    I have installed Measurement studio 8.5 to work with my VB6.  I can't find the led indicator.  In which activeX should I find it?   Did I fail to install something?
    Thanks
    Rafi
    Solved!
    Go to Solution.

    Hi Rafi2003,
    The LED is part of National Instruments CW UI.  You will see the CW button (toggle switch) in your toolbox when this is a selected component.  You can place this control on your form and right click to bring up the properties.  In the property pages dialog box that appears, you will see the LED indicator located under the style tab.
    Cheers,
    Kelly R.
    Applications Engineer
    National Instruments

  • LED INDICATOR ON RAZR & RAZR MAXX..

    Maybe it will Return an then again Maybe it Won't! 
    I called Motorola an asked a Tier 2 Tech if there was a update to fix the issue with the Led notifier that use to come on when Charging the Razr Before the 6.12.173 XT912 update came out an to her knowledge she said there wasn't any on the near future Menu.
    But she would escalate the issue to the team that works in that area of the phone because it had worked with the previous Build. She told me she would get back me next week if anything was found out from the Team.
    We or i won't hold my breath on this as they never fixed the Notifier on the Droid X to wear it would show it was charging an that was almost a year ago i asked her about using an App. Like Light Flow an she said even though you probably could we don't recommend them an we don't give support to them as they are third party Apps.  So Let's Hope that Moto has a fix an doesn't diss this issue. B33

    I think it's something they are just becoming aware of.  Matt, moderator on the Motorola forum, was not aware of it but now is. He's pretty good about getting things looked into.
    Mine is usually on while charging, but if I want a quick charge I turn it off and wait for the green light so I do hope they fix it.

  • Please help my led indicator isnt working?

    hi i literally got my blackberry on friday and now my led light has stopped working all together.... doesnt flash green red blue with bluetooth. iv checked all the settings and they all say its on. i have downloaded things like ringtones and color id where the led indicator was flashing lots of colors and i dont know whether theyve done something to it? my lights defo working as when i switch it off it goes red.
    please help x

    I'm not that familiar with the color id app but I would be willing to bet it might be causing the problem.  Try deleting it and see if the led starts working again.
    Also, what kind of device do you have?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Maybe you are looking for