LED light on 3220

last night one of the green led lights in my grips switched on and wont go off unless i remove the battery. i have switched the light
sequences off and they dont flash. this is just on continuously and
running down my battery!
any ideas?
Thanks

you are probably best to get an engineer to have a look at the handset. you can find your local repair centre by going to http://www.nokia.com/repair
GA
There are only 10 types of people in this world. Those who understand binary and those who don't

Similar Messages

  • Iphone 6 plus led light not working in 8.3

    I updated to 8.3 a few days ago and have just noticed that my led light does not work.
    I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • MSI X48C PLATINUM TURBO CARD LED LIGHTS

    Hi All
     I have MSI x48c platinum it's working fine but DIMM Turbo card led lights is still off
     Please tell me how to on Turbo card lights. 
     Sorry for my English

    The turbo cards will never light. Only special turbo cards for presentations will light. The turbo card by your motherboard have no LED´s mounted.

  • I am having some problem with my battery, always at 99%, led light not work

    Hi,
    I just purchased my macbook 2 weeks ago. The battery was perfectly fine on the first 2 week. After fully charge, led light turn from amber to green as what it suppose to be.
    But since today, when I plug in my charger to my laptop, the led light wasn't on at all but based on the battery icon shown on mylaptop, it is charging slowly.
    I tried to unplug the charger and replug it in again. It turns to green ( while the icon shown 60%) and 3 sec later, the light off again.
    unplug-replug again, it turns to amber, a few sec the light turns off again. and it just keep on and off.
    I am a bit confused. I rang up apple helpline, they suggested me to reset the PRAM which seems work.
    restart my macbook. the charger turns to amber and charging till 99% and not turning green anymore.
    is that normal?

    This is a quote from the page I bookmarked for you to read. "The System Management Controller is an integrated circuit (computer chip) that is on the logic board of the MacBook or MacBook Pro. As the name implies, it is responsible for power management of the computer. It controls backlighting, hard disk spin down, sleep and wake, some charging aspects, trackpad control, and some input/output as it relates to the computer sleeping."
    The SMC used to be called the Power Managment Unit. I am surprised that apple did not have you reset this also.
    If the battery fall below 96% it will start a charge cycle. Have you callibrated the battery.
    It is hard to diagnose the problem till you try all the steps. Let us know how it turns out.
    Mort

  • Camera and led light not working after IOS 7 update on iphone 5 help please!!

    After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • No Notification LED Light for Missed Calls Since Update

    I used to get a LED light notification when a call was missed. Now since the new "update" I no longer get the notification. Anyone else notice this? How do I get the LED notification light back?

    This happened to mine right after updating, and was easily fixed by clearing the Cache of my texting and email apps. None of my LED indicators were working, but it's a simple fix. Just go into Settings -- Applications -- Manage Applications -- Select your texting and email apps, and select Clear Cache. That will also fix your call/voicemail notifications. No need to go buy an app.

  • 23" HD Cinema Display LED light

    I just received my 23" Cinema HD Display. I plugged it into the wall and the LED light never came on, or blinked. I got nothing. My tower has not arrived so I am waiting on the tower to get here. My question is: Should the LED light come on or blink when I plug the display into the wall? Please don't send me to that link that discusses how the LED light on the new monitors work because it didn't help me at all with my new monitor question.
    I also tried plugging my IBM laptop to the monitor using the USB connection and still nothing happened. (I didn't think that would work anyway)

    I can understand the monitor screen not turning on. But shouldn't the LED light (the button on the right hand corner of the screen) at least light up or blink or something?

  • I have the led light on but since I upgraded to 7.0 I can't get it to work

    I Upgraded to the 7.0 software now my phone doesn't light up when it rings anyone have idea led light is on

    Thank you. I installed this 5.1.7, to no avail. I click on the Safari icon and nothing happens. I uninstalled the other Safari versions, including the later ones eg 10.5.17 before installation. I don't understand. I thought when going from Leopard to Snow Leopard the update program would note Safari version 10.4 there and update it, I just got the message after the update that 10.4 is the wrong version. Have I left out something? Do I need to install somehing else to complement 5.1.7? Thanks

  • HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

    My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
    Thanks!
    Justin

    Justin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1551 led light continuously flickers apple logo appears then no signal indicator   appears , how can I get back original  setting?

    Having trouble ,tried giving update and now the led light turns on and off continuosly  apple logo appears for a few seconds then the no signal indicator can someone how I can return the unit to its original settings?

    You will need to grab a micro usb cable and restore in iTunes
    http://support.apple.com/kb/ht4367

  • BB 9320 - Screen goes black, LED light off and device unresponsi​ve for a 3-30 seconds, then repeats

    Hi there, 
    I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring. 
    When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes completely unresponsive. It will eventually come back, and restart the task (ie, if i'm typing a txt messge, it will be back to the message inbox, or for an email back to my email inbox, etc.). It's really frustrating because at times it will continually happen for so long that I give up on using my bb entirely. 
    I have tried restarting the device to factory settings, removing the battery, keeping it continually charged, draining the battery entirely. 
    What is happening? How can I fix this??

    Hey makader,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • SG 200-08 All LED lights flashing green after power failure

    Thinking back, about a month ago I updated the firmware (sorry I can't check version at the moment). The switch has been working fine since then. Today I needed to move some power cables and the switch lost power. Now ALL of the LED lights are flashing green and I can't access the switch. I've tried setting a static IP on my laptop to 192.168.1.20, mask 255.255.255.0, and accessing the switch on 192.168.1.254, but there's no response. I've tried holding in the reset button for at least 30 seconds while the switch is powered on, AND while powering it on. None of that has worked. Also when I first power it on, the system LED flashes orange very quickly for a second or so, then all of the LEDS start flashing green.
    What am I missing?

    Its been a few months, so I don't remember the details, but I think it was a combination of using the reset button and then opening a browser to the default IP address. If you look at the screenshot I posted it has the IP address I used. I downloaded the firmware again and the webpage in the screenshot is where the router is asking me for the location of the firmware I downloaded. After it finished reloading the firmware it worked again.

  • I just upgraded to IOS 5 on my iPhone 4 and how do i get my LED light to flash for notifications?

    I have the iPhone 4 and just upgraded to IOS 5 today and saw that there is an LED light that can flash for alerts. How do I turn this on?

    I saw that this seems to be a widespread issue and is independent of third party music apps, so in the interest of helping things to consolidate, I've started a discussion that links to other relevant discussions I could find. Here's the link: https://discussions.apple.com/thread/3456073

  • HP PRESARIO CQ61-210SQ NOTEBOOK-NO LED LIGHTS,NO START.

    Halllo i have big problem,my HPresario does not have any lights ,and when i want to push it- nothing....only the light ,who is next to to the power corde is lighting.No screen no led lights .nothing...What to looking for,i don not now,i think it is not the power...hdd or video card.....or what....PLEASE HELP ME...!!

    Hi @koko_atina ,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and getting a blank or black screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    If you can't get to the System restore menu. Here is a document on computer won't start.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Ipod for Windows 2006-06-28 software installer fails

    When I install the iPod utility for Windows, version 2006-06-28 (the current download), the install shield goes to 100% --- but then it reverts and deletes all the files it installs at the very end. eventvwr tells me the last application event was: "

  • How to get multiple html output file  from an xml document via xslt?

    Hi, the purpose is to generate multiple html output file from one xml file depending on special tag. exp: i have an xml file which contains sevreral articles so how to get each article section in an independant html file Thanks for help

  • Problem with Emu 0404 soundcard

    Hi! I want to connect my E-MU 0404 soundcard, with my Macbook pro 2011. The problem which appear is that the computer not syncs with my soundcard, and when i´m trying to record, the computer starts to record from the computer microphone. Do anybody k

  • Linked List Help!

    Hi, I have an assignment on linked lists, as a beginner I am really struggling with it for hours... I have to write the following methods without importing any libraries. "Write an iterative method delete() for LinkedStackOfStrings that takes an inte

  • "Simple" NI-DAQmx programming

    Using a NI-PCI 6024E card with NI-DAQmx and C, I would like to acquire sequentially (at 200kHz) a single sample on the "ai0" to "ai5" analog inputs on every rising edge of the "pfi0/ai start" input (driven by a signal at 50Hz)... What clock and timin