Led lights are on even after shutdown,please help me

after shutting down my lenovo g570, windows 7 os, the screen goes off but all the led lights are still on. Then i need to hold the power button to shut my laptop off. I even tried for clean boot but of no use. I even tried of shutting down in safemode by clean boot but now shutdown screen is freezed.
please help me

Hi Thatigowtham,
Welcome to Lenovo forums
As I understood that you are facing the issue with the laptop where the LED lights are glowing after laptop shutdown completely.
I would like to suggest few of the trouble shooting steps:-
Try to boot the laptop by connecting only battery, remove the adapter.
Try to boot the laptop by connecting only adapter, remove the battery.
Also perform the power drain, by disconnecting all the extrernal devices connected to the laptop.
Turn off the laptop.
Remove the battery and also the adapter. Now press and hold the power button for 30 seconds.
Connect the battery and adapter and try to power on the system.
Also check in safe mode for the issue.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

Devices remain on even after shutdown

Since installing BIOS 1.4, or since converting my IDE drives into Promise RAID-0, I have noticed that my peripherals do not turn off after shutdown. My keyboard lights turn off, but the optical laser on my mouse stays on, as does the LED on my joystick. However, if I unplug the computer and plug it back in, the devices remain off. Can anyone help me out?

I have the same probelm with my system, my micorsoft optical mouse stays on after power down. It only started after I upgraed to BIOS v1.4. However, here's a link to a microsoft support articel about this (atricle 325975 at the knowledge base) ( http://support.microsoft.com/default.aspx?scid=kb;en-us;325975&Product=hdw). It's apparently not a big deal and it happens. I haven't tried switching over to the USB port yet for my mouse, it's still in the PS2. My only reason for not wanting the light on, is I wonder if it degrades the life of the mouse? The microsoft atrcile says "If the continuous mouse light is acceptable to you, you can safely leave the mouse connected to the PS2 port. ". However, that might be covert talk for "please leave it plugged in so it dies sooner and you have to buy a new one and fatten Bill Gates' wallet". Anyway, I don't think it's a huge issue. Odd that it only happens with v1.4 though....
Dave

HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
Thanks!
Justin

Justin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using ios8.1 on iphone 6. icloud is enabled. when I add a contact on the phone it does not appear in icloud contacts even after backup. Pl help

using ios 8.1 on iphone 6. when I add a contact on the phone it does not appear in icloud contacts even after backup. pl resolve

Hello feroziem,
The article linked below can help get iCloud and your iPhone to synchronize your contacts.
Get help using iCloud Contacts
http://support.apple.com/en-us/TS3998
Cheers,
Allen

HT5622 "your apple id has been disabled". Will not clear even after resetting. Please help!

Unable to clear message even after resetting.

Contact iTune Support if you still have problem.
https://ssl.apple.com/emea/support/itunes/contact.html

HT201363 After i wrote the wrong password for a few times my icloud account got disabled even after reseting my password.help

After i wrote the wrong password for a few times my icloud account got disabled even after reseting my password.help

Hi and Welcome to the Community!
Failure of the BBID credentials will never wipe a BB. What actually happened was you incorrectly entered your user-created device-lock password too many times, and it then proceeded with wiping the device, as per the requirements of the security level accepted when enabling that feature. There is no way to stop it.
Sorry.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pages, Numbers and Keynote are "waiting" even after soft reset

the 3 apps first "greyed" on home screen, did the soft reset (pressed home + sleep buttons). they kept "greyed" after reset, and I can't even see them in Purchased in app store. the only way I can open them is to search for them in app store, and tap open.

Please don't type in all capital letters. It makes your post harder to read.
Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

Hot even after shutdown

i just bought my macbook pro yesterday! i turned it on and started to configure it and after being fully charged i turned the power off. this morning it is still buzzing and is super hot. should i just take the battery out whenever i dont use it? this seems very inconvenient for a 2000+ dollar laptop

How did you turn off the power? Did you use the Shut Down... menu item in the Apple menu?
There won't be any fans once it is shut off but it may take a while to shut down. You might want to watch and wait for the shutdown to be complete to make sure you don't have a software problem.
Once the MacBook Pro is shut down properly it won't wake up again unless you schedule a Start up or wake using the Schedule... button in the System Preferences, Energy Saver panel.
This is different from sleeping where many things could cause the MacBook Pro wake back up. If you unplug the MacBook Pro and close the lid, it should stay sleeping if it is working correctly. Even if you wake up the MacBook Pro in that state using the remote control for example, it goes back to sleep in about 5 seconds.

Adapter light stays on even after removing from MacBook Pro

Hi,
I have a MacBook Pro. I noticed something odd last night. When I remove the adapter from the MacBook Pro (you know, the magnetic end that attaches to the MacBook Pro), the light on the adapter still stays green/on. I actually have to unplug the adapter from the wall outlet to make the light turn off. This never happened before.
Has anyone seen this before? Any advice?
Thanks.

I think that the light is controlled by the middle pin in the connector. Check it very carefully with a magnifying glass to see if any of the pins are bent or if there is any metalic dust in there.

InDesign Server fonts are locked even after document closed

Hi!
We get "file in use" messages from windows, after installing latest InDServer update.
We create packages from open documents, on the server, then we close the documents.
After that a piece of code is to move the package to another location. This "move" fails now, after installing the update called 7.0.3.533.
That upgrade was also called: Adobe InDesign Server CS5 Release Update 7.0.3 WIN
Screen-shot: Manually repeating the MOVE FOLDER method call.
Is this a known error? What can be done?
The InDesign documents are using "document fonts", that is these fonts should be local to the document.
We also could find no specification of the changes implemented in 7.0.3.533.
Best regards,
Andreas Jansson

Hi Folks,
I'd forgotten about this particular problem, but here I am again as I still have no solution for it. On a number of documents, I am now seeing a number of frames contain a large number of links and I cannot see a way to access them to remove them (whether this be by changing the resource state, I don't know).
Earlier on I tried something simple by simply getting hold of ILinkManager and calling QueryLinks(). As expected it returned no links! Another aspect of this issue can be seen in the screenshot below - there are no links, yet the tooltip specifies that there are 2 unique links (I imported tagged text into the same frame twice).
I now have two projects using slightly different approaches to importing tagged text. One uses IImportSuite::DoImport() as mentioned before and the other uses IImportResourceCmdData\IReplaceCmdData. Both import with no problems apart from this annoying side-effect.
Has anyone got any ideas?
Thanks in Advance,
Andrew

My points are same, even after posting blogpost

Dear Gurus,
I have recently posted the blog post, but the points are same and also mission is incomplete.
Please let me know what is the reason?
Regards,
Manjunath B L

Dear Manjunath:
As per my kwonledge, even if you move to other space, the points are not added, Only likes and rates will add points for this blog.
I think is better to work with other topic / blog in a SCN space.
Regards
Jose Antonio

ITunes keeps old artist names that are incorrect, even after remaking the database

I have a huge classical music collection. Using iTunes is a frustrating experience since the tags are quite useless. No one wants to search for
this conductor with that orchestra
as the artist. You want the composer!
And then, in multiwork sets, iTunes tags a CD as
Beethoven symphonies - Vol. 2
rather than
Beethoven: Symphonies Nos. 3, 4
And, for example, I am reripping Dvorak's works. As I type in the Artist (composer), the first choice is
Dvorak, Anton
Then it lists the correct
Dvorak, Antonin
Where is it getting the incorrect name from?
I once had Anton by accident, but I retagged all my files to make this correct. Now iTunes does not list Dvorak, Anton as an Artist, but it is still there when I retag.
I deleted the .xml and .itl files in my music folder, and remade the database from scratch. They are still there.
How do I fix this?

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Still no Lighting effects filter even after PS in 32 bit

I am booting up PS in 32 bit mode so I can use the Lighting effects but I am still not getting the option in the render menu. Can anyone help?

Hmmm… I wonder if folks who got the CS5 DVD that installs Photoshop 12.1 right off the bat only get the 64-bit version of Photoshop CS5—as opposed to those whose install media installs 12.0 and then they have to update to 12.0.4.
It's pure speculation, but the CS 6 beta for the Macintosh is only 64-bits, no 32-bit version available.

My FCP titles are fuzzy, even after rendering.

Creating some simple titles in FCP. They are fuzzy and look unrendered. I've tried rendering them every way I can. They don't show as needing rendering.
How can I get these titles to render and appear normal (i.e. not fuzzy)?
These are simple text titles, not a crawl or anything like that.

Try using boris title3d. You need to understand the difference between vector and bitmapped graphics. Boris title3d allows you to work with "vector" text which will create the text for each frame at high resolution as long as you use the control tab to reposition and resize.
It's much more flexible than the text generator.

Led lights are on even after shutdown,p​lease help me

Similar Messages

Maybe you are looking for

Led lights are on even after shutdown,please help me