LED lights on the motherboard flashing blue z77a gd65 model
I know how to disable the top ones in the bios but anyoone know how to turn the ones off on the lower area close the the bottom pci express slot
As far as the LED im talkin about is it a different location then you posted , Which Im sure is the HDD LED
Thinking about just sharpi n the LED so that the blue goes away lol unless any other suggestions out there
I will try to find a pic of the LED im talkin about on the mobo
http://www.google.com/imgres?imgurl=http://images.tweaktown.com/content/4/6/4687_07_msi_z77a_gd65_intel_z77_motherboard_review_full.jpg&imgrefurl=http://www.tweaktown.com/reviews/4687/msi_z77a_gd65_intel_z77_motherboard_review/index2.html&h=1425&w=1300&sz=1568&tbnid=yYgVK4JuucHmDM:&tbnh=107&tbnw=98&zoom=1&usg=__fZDe6fvoDxBhk9MTqCtoXyoMaoA=&docid=otDoRdHcH7uF8M&sa=X&ei=4GNQUaKBCc6A2QWusoHgCg&ved=0CGUQ9QEwDw&dur=503
Right below N1996 then below the blue pci xpress slot , but right above the pins for plugging in all the case switches / wires
Similar Messages
-
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?
Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
I am controlling a stepper motor that is coupled with a valve with four outlets (using an Arduino). I've got a general understanding of how to control the motor, but I want LED lights on the front panel to light up that indicate which outlet the valve is currently at after the steps are taken. The method I'm thinking about involves a lot of repetitive code. I'm not that experienced with LabVIEW, I'm assuming I need some sort of loop structure but I don't know how to set it up in order to control the sequence of the LEDs. I've attached my current block diagram for a visual aid if needed.
Attachments:
Capture.JPG 33 KBI was thinking about using the Stepper To Go and Stepper Write functions four separate times, using the same constants for the steps each time since the distance between each outlet is equivalent. The only difference would be what's connected to the "steps remaining" node, which would be the function that activates one of the four LEDs (if that makes sense). I was thinking that doing it this way would be a little counterintuitive since the only thing that needs to be changed is the LED indicator.
-
When starting the computer I get the dong but then it stops with three loud beeps as the light in the front flashes in line with the beeps. The beeps repeat till switching off
Check out this Apple support article https://support.apple.com/kb/HT1547
-
the only thing I get is the Apple symbol on my TV screen and the led light on the Apple TV blinks.
Apple TVWelcome to the Apple community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
Hey guys,
I am having problems with charging my mac Air. Sometimes it charges perfectly but then at times much as it shows that it's getting the power from the charger, it says "not charging" and the led light on the charger does not light up. Any help?
Rgds,
Kido-VjThat can happen when you are Taxing the system. No Apple supplied AC adapter supplies enough power to both power the system and charge the battery at the same time when the system is under Heavy Load, when you are Taxing the system heavily. At those times it will draw power from both the AC adapter and the battery at the same time. So if it is drawing power from both it can't charge the battery while it is drawing power from it.
-
my macbook wont turn on. its a total black out even the led light on the charger has no light. the battery indicator has no light its a total blackout. if you pressed the power button theres no light at the bottom. nothing at all even the spin you cant hear anything. blackout as in
Try resetting the System Mangement Controller -> http://support.apple.com/kb/HT3964.
If that has no effect, then your only recourse is to take your machine to your local Apple Store/AASP and have them run diagnostics on the machine.
Good luck,
Clinton -
Please add indicator LED light for the HDD and sleep back, add some system hotkey
After Lenovo have announced the new T440 T540，we were shocked by the graphic card: GT720m (game card) and no indicator LED for HDD. At last we need a NVS graphic card to do some grophic related work or mobile business.
So we waited for the new w540, after coming to public we were shocked again there is :
- no indicator LED for HDD, sleep, wift and bluetooth,
- no hotkey to disable touchpad
- no hotkey to sleep
- no turn on/off screen hotkey
- no hot plug for cdrom or second HDD
these are miserable and somehow funny, maybe no indicator for apple is ok as most new macbooks are all SSD
rather than mechanical hard disk.
maybe no led for sleep for apple is ok as Mac OS goes to sleep very quick and they use SSD. But for thinkpads we close the lid and wait for the moon LED light to take thinkpad freely, also for the sake of hard disk rotation. Now we need to look at the power button which is impossible when the lid is closed.
no hotkey for sleep ? some friends said " Fn+4 acts as a suspend shortcut (I think it was added in BIOS 2.05)" , we hope it is ok.
no notkey to off display? no hotkey to disable touchpad? It is really unconvenient
So is there update for these minus? Hotkey may update by the BIOS and driver. Will lenovo do so? After testing well, it will be back really easy to use.
And is there any Modle B for w540 to add LED back ? Missing indicator LED for HDD is nightmare for troubleshooting. Miss sleep indicator in front of Thinkpad(A-Side) is miserable for bringing sleeping w540.
Miss wifi and bluetooth is also unconvenient..... And it is not a very hard work.
Also it is said there is no driver update for fingerprinter reader from AuthenTec, because AuthenTec is bought by Apple?
For thoso who do is really smart but also keep the good previous features,
PLEASE
http://www.notebookreview.com/
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W540-Future-Owners-Thread/td-p/1308051/page/6
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Received-my-W540-today-First-impressions/td-p...Today on shutting down the W540, I get the Windows blue shut down screen with the comment:
"Operations are in progress, pleases wait. The machine will be turned off automatically after the operations are complete."
OK, so I waited 20+ minutes.... Mouse logo spinning, but no idea what i/o's are going on. Fast disk access? Slow disk access, intermittent disk access? Or is it locked? CtrlAltDel has no action. Mouse cursor does move.
So did a cold boot/restart (still not knowing what was happening in the Black Box). Must have locked up restarting, as I waited 10+ minutes with NO IDEA what was going on, a REAL "black box".
Cold booted again, and tried a Safe Mode. Worked!, and did a check disk - said not errors????. All OK now.... but WHERE IS THE HD LIGHT!!!!!!!
Now I just cheked, the Dell, ASUS, TOSHIBA, SONY workstations have them..... We need to review this carefully at the R&D level, AND NOT LISTEN TO MARKETING! T'was, my fault for deciding on the W540, I never checked that specification, and just ASSumed all the indicators lights would be there! Now I'm stuck with a $2,500 toy - never feeling secure in the work being done. I need rwo more workstartion, but it will be a nuissance to be on two types of workstations.
When I run my Stat package, it takes sometime 1+hr of analysis, I have no idea if the program is waiting, paused, or locked.... no HD activity light, no heartbeat no idea if I need to reboot, or wait. Maybe it's an act ot terrorism to waste US worker's time ???? <g> -
Led light used as a flash light
Has anyone figured out how to turn the camera led flash on for a light.
My wifes htc is able to use the led for a light at night to check your keys,read a map,etc
also my uncles trac phone has an led light to be used as a flashlight.just wondered if any modders were working on this.(it's pretty bad when a trac prepaid phone has this feature and my uncle picks on me cause my bb can't do it.he calls it a crapberry.As long as you backup your data before you perform the upgrade, you'll be fine.
By default, during the Upgrade of the OS, desktop manager will backup the data and restore it after the upgrade.
You will see vast improvements with the upgrade. -
Overclocking the i7 3770K on Z77A-GD65 MB. HELP ME MY NEW FRIENDS!!!
Hi everybody! I really truly hope that someone can help me. I have tried to look EVERYWHERE with no good results... :(
I have a new Z77A-GD65 motherboard and an Intel 3770K processor running on it and I am trying to OVERCLOCK my system properly. You might think that who the hell is this bozo if he cannot overclock with the manuals and all..
Anyway, I really never have gone deeper into overclocking and I would sooooo much like to have a PRESET file (BIOS settings) which could give me about 4.5-4.8GHz frequency and then my memory is a whole another issue. I am able to run it at 1,6GHz anyway but I'd like to try more.
The thing is that I don't even know whether I should have that Genie II button enabled on the motherboard or not! I mean, can I overclock my MB even further if I have Genie button enabled? And then should I enable Genie II via the Control Center from within Windows 7 x64 too?? Or should I have that Genie button disabled from the MB and do everything "manually"? Frankly I know nothing and I am absolutely frustrated.
I know I would have to set some voltages and factors at various points but I find it too complicated. ASUS had a software that you could choose "turbo profile auto overclock" and that software just adjusted voltages and frequencies automatically, rebooting every once in a while until the system came unstable and it applied the latest stable settings. MSI should have that kind of an over-clocking software too!
So could you please reply for me stupid one and tell me that how should I overclock my system. Meaning all the possible settings that you could imagine. I have tried Googling of all the weird C1E's and C-states and HPET's and everything but it's just a mess. I just would like to get as much power out of my PC as possible. Period. I really would appreciate all kind of help.
And yeah, one more thing;;; when I have this MSI Control Center installed in OS then will it kind of "override" the BIOS settings done when booting up? I'm asking a lot of stupid questions but I have struggled with my new PC for four straight days and nights and my brains are starting to melt....
PLEASE::::
- give me the multipliers
- voltages
- other settings (like power settings)
- DRAM timing mode and frequencies
- EIST on/off?
- Turbo mode on/off?
- Enhanced turbo??
- ANYthing you can ever think of.
I'll humbly wait for a reply. Thanks for reading.
-TommiQuote from: Froggy Gremlin on 25-September-12, 04:28:27
There are a number of OC threads here to give some basics. First off, learn what the limits are for voltages, etc. Intel datasheets & design guides are a great source. I will give you two voltage limits, 1 - DRAM V. = don't exceed 1.65v's, 2 - CPU V. = for an everyday OC, don't exceed 1.400v's. Get yourself a digital multimeter. There are several OC methods, so pick the one right for your needs.
https://forum-en.msi.com/index.php?topic=159647.0
It's a good start thanks to Froggygremlin.
Btw if I may to add tips : try to overclock processor first with memory stay on default speed if we feels it is stable enough and want some more then go with the memory -
Why does it do this and what can I do to fix it I want to use my light at all times
I read the article thanks. I tried the settings-general-reset-reset network settings-reboot system-go to wifi settings-select wireless connection-select the ">"-symbol-select auto for http proxy. I was optimistic about that because I thought I changed some setting somehow to cause this problem, but it didn't work. More specifically, I did connect successfully and browsed the Internet for a good while, but then I put down the phone for a minute, the phone went into sleep/power save mode, and when I picked it back up a moment later it was no longer connected. Dang. Had to select the connection and use my password yet again.
Another valuable bit of info for you. The only network with which I have this problem is my home. I use all kinds of devices at home and no other devices have this problem. Also, I use this iPhone all over with various wifi networks at hotels and starbucks and family's homes with no issues whatsoever. It remembers and automatically reconnects with every wireless network except the one in my own house. -
I JUST HAD A PROBLEM WITH MY IPHONE "4GS".THE SCREEN DISPLAY ARE BLANK.ALL THE APP ITS GONE.JUST HAVE ONLY "BLACK AND BLUE LINE"INSIDE THE SCREEN.ALL THE PHONE FUNCTION STILL ABLE TO RECIVED THE CALL BUT UNABLE TO MAKE PHONE CALL BECAUSE THE TAP ICON ARE GONE.
Not sure what the origin of the problem is, but you should try deleting iDVD's preference files.
First, close iDVD and go to your Home(YourUserName)/Library/Preferences/com.apple.idvd.plist
Drag this plist file to the trash. iDVD will automatically create a new fresh one when you reopen it.
Open iDVD.
See if the main screen is now visible.
Post back if that did not help. -
60D - When shooting an Image or Video light in the background flashes black then back to light.
As mentioned above, the image in the LCD, if light is present in the background it continuously flashes from light to black, just as if it was flashing form black to white. I don't know whether its a setting or theres a problem internally.
It might be the Highlight Warning "Blinkies". Check menu/owners manual for a on/off for Highlight Warning.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille
Maybe you are looking for
-
How to get user information from ldap - bpm11g
hi all, i need know how to do get information from ldap, but using adf bean for show user data in adf form. anyone knows about this ? tks.
-
.Mov from Final Cut Pro not playing on PC
I've made a short video edited with Final Cut Pro. The file was saved as a .mov QuickTime movie. The demo looked great on a Mac but it has to go to people who only have PCs. Loaded the demo onto the hard drive of the PC, but the demo is showing poor
-
Question about xmonad package in the repos.
When I sudo pacman -S xmonad it installs xmonad and ghc goodness. But one thing that has always bothered me is that I had to hunt down a default .xmonad/xmonad.hs config file for xmonad. Can anyone explain why the package doesn't come with a default
-
Re: Std report with division wise.
Hi guru's, Is there any standard report to get the data for the same material in different divisions. If it is not there, is there any process to get the required data with the help of current standard reports. thanks tuljasingh.
-
i recently moved to new jersey from brasil...i had my iphone via claro in brasil sao paulo....i now want to use it on AT& T Or other...i understand it is blocked....can i get it un blocked legally correctly say at apple store or can i do it via apple