LED on for 5 seconds and off 3 seconds

Hi
      I want to turn on the LED for seconds and off for 3 seconds.And repeat this process till I press the stop button.How can I go about it?
                  V I P U L L
        < <R E L A X I N G > >
W E L L . . .QUITE THE SAME WAY
Regards
RobinHood
Solved!
Go to Solution.

Thanks to Altenbach, for this example in other thread. I will try to find out where it is exactly and post back.
Message Edited by mathan on 03-20-2009 01:32 AM
Attachments:
untitled2.PNG ‏43 KB

Similar Messages

Screen is black, no fan is running, LED lights for volume is on/off

On a random day, I opened up laptop to use and hit the power button, everything turned on but the screen slowly went white. turned back off & then back on & still did same thing. A couple months later, tried to use it again, LED lights for volume, network, and light on front of laptop are lit, but everything else is not; screen is black, no fan running. This is only when I plug an HDMI cable from one laptop to another. Laptop was plugged into charger, when it is unplugged of hdmi, it is completely useless. Is there some way I can get the files back that i had on the laptop? my brother said a while back that it is completely shot. Id really appreciate some help & if anyone knows the fees I would have to get it fixed by HP or best buy, that'd be great! ( if it is even worth fixing, let me know.)

If you want us to help, then tell us what kind of laptop we are discussing. What are you trying to do by running an hdmi cable from one laptop to another? It will do nothing so don't do it. You can check to see whether it is the motherboard or the screen by connecting an external monitor and see if it gets a picture on the external screen. You can get your data off by removing the hard drive and using an adapter to connect it to another computer.

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

Shortcut for toggling on and off the preview after developing

I am searching for a shortcut to toggle on and off the preview of the developed Picture. So I can see "Before and After".
There is written in the German Version of the Shortcut List: Nur Vorher anzeigen -- \
Be aware that it is not / which you will get with SHIFT-7 but for \ you have to SHIFT-ALT-7.
This shortcut marks the picture into yellow and does not as intended.
Thanks in advance.

Hi dj_paige,
yes you are quite right. It is the backslash as you may see in the original post. It is SHIFT-ALT 7 and this will generate "\".
And also it is said to be exactly for this purpose (Before-After). But it does´t do so. That was my question.
I also had since then contact to Support from Adobe, but they could not help either.
HM.
Uwe

Please add indicator LED light for the HDD and sleep back, add some system hotkey

After Lenovo have announced the new T440 T540，we were shocked by the graphic card: GT720m (game card) and no indicator LED for HDD. At last we need a NVS graphic card to do some grophic related work or mobile business.
So we waited for the new w540, after coming to public we were shocked again there is :
- no indicator LED for HDD, sleep, wift and bluetooth,
- no hotkey to disable touchpad
- no hotkey to sleep
- no turn on/off screen hotkey
- no hot plug for cdrom or second HDD
these are miserable and somehow funny, maybe no indicator for apple is ok as most new macbooks are all SSD
rather than mechanical hard disk.
maybe no led for sleep for apple is ok as Mac OS goes to sleep very quick and they use SSD. But for thinkpads we close the lid and wait for the moon LED light to take thinkpad freely, also for the sake of hard disk rotation. Now we need to look at the power button which is impossible when the lid is closed.
no hotkey for sleep ? some friends said " Fn+4 acts as a suspend shortcut (I think it was added in BIOS 2.05)" , we hope it is ok.
no notkey to off display? no hotkey to disable touchpad? It is really unconvenient
So is there update for these minus? Hotkey may update by the BIOS and driver. Will lenovo do so? After testing well, it will be back really easy to use.
And is there any Modle B for w540 to add LED back ? Missing indicator LED for HDD is nightmare for troubleshooting. Miss sleep indicator in front of Thinkpad(A-Side) is miserable for bringing sleeping w540.
Miss wifi and bluetooth is also unconvenient..... And it is not a very hard work.
Also it is said there is no driver update for fingerprinter reader from AuthenTec, because AuthenTec is bought by Apple?
For thoso who do is really smart but also keep the good previous features,
PLEASE
http://www.notebookreview.com/
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W540-Future-Owners-Thread/td-p/1308051/page/6
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Received-my-W540-today-First-impressions/td-p...

Today on shutting down the W540, I get the Windows blue shut down screen with the comment:
"Operations are in progress, pleases wait. The machine will be turned off automatically after the operations are complete."
OK, so I waited 20+ minutes.... Mouse logo spinning, but no idea what i/o's are going on. Fast disk access? Slow disk access, intermittent disk access? Or is it locked? CtrlAltDel has no action. Mouse cursor does move.
So did a cold boot/restart (still not knowing what was happening in the Black Box). Must have locked up restarting, as I waited 10+ minutes with NO IDEA what was going on, a REAL "black box".
Cold booted again, and tried a Safe Mode. Worked!, and did a check disk - said not errors????. All OK now.... but WHERE IS THE HD LIGHT!!!!!!!
Now I just cheked, the Dell, ASUS, TOSHIBA, SONY workstations have them..... We need to review this carefully at the R&D level, AND NOT LISTEN TO MARKETING! T'was, my fault for deciding on the W540, I never checked that specification, and just ASSumed all the indicators lights would be there! Now I'm stuck with a $2,500 toy - never feeling secure in the work being done. I need rwo more workstartion, but it will be a nuissance to be on two types of workstations.
When I run my Stat package, it takes sometime 1+hr of analysis, I have no idea if the program is waiting, paused, or locked.... no HD activity light, no heartbeat no idea if I need to reboot, or wait. Maybe it's an act ot terrorism to waste US worker's time ???? <g>

Difference in standby battery life for 3G on and off?

I have an iPhone 4. I was wondering if there would be a difference in the standby battery life if I left the 3G on compared to turning it off?
I know there is definitely a difference in talk time, but the Apple website doesn't say if there is a difference in standby time.

Well all i can say is test it out. Try turning off 3G and use Edge for at least a day or until your battery drains, record the standby time. Recharge your phone to 100% and and this time turn 3G on and test it.

SCCM 2007 and Active Directory - On-boarding and Off-Boarding Process

Currently, when a user resigns from our company, we rebuild their computer immediately and provide to another user.
From a best practice perspective, should we delete the computername from AD and then rebuild and join to the Domain? We also have SCCM 2007 in place. Are there other best practices for SCCM 2007 and AD that we should be following for on-boarding
and off-boarding users? Any suggestions would be greatly appreciated. :-)

With respect to AD, it will be better to reset the account rather than deleting it. This way the SID is retained and all permissions (for DNS records etc) and AD group memberships will be retained. AD group memberships will be more significant, depending
on whether it is used for SCCM collection definition rules
In SCCM, if the record is not deleted, it will be identified as a known computer and OSD advertisement can be pushed on the client. Ideally task sequence should use same name as the SCCM resource record for naming the newly built computer. In case AD/SCCM
objects are deleted, duplicate records may get created depending on the timing of client registration and AD system discovery cycle. If SCCM client gets installed and registered before next AD system discovery cycle, there shouldn't be any issues.
But if AD discovery cycle runs before client registration, two records will show up in SCCM console and one will be obselete, which has to be deleted manually. This issue can be resolved by adjusting the frequency and schedule of AD system discovery cycle.
My suggestion will be to reset the computer account in AD and retain the SCCM resource in case of machine rebuild scenarios. In case of task sequence not retaining the computer name, custom steps can be added in TS to set variables as required.

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

take a look at this topic, maybe will help:
http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn'

My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

My iphone 4s got water in the headphone port. I put my phone in rice for 24 hours and the LED light is on. It stays on even when the phone is off. How can I fix it with out spending 200 bucks at apple to have them fix it?

My iphone 4s got water in the headphone poert. I put my phone in rice for 24 hours and the LED is on. It stays on even when the phone is off. How can i fix it without taking it to apple and spendding 200 dollars to have them fix it?

Short answer is you probably cannot. Once water gets inside the device and it is powered on, the damage likely is permanant.

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

This is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds. If someone is calling me during that time it says mobile is either switched off or outsid

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please help

You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

LED on for 5 seconds and off 3 seconds

Similar Messages

Maybe you are looking for