Led panel flickering - noticable in low brightness and white backgrounds

Hello I have an HP Pavilion x2 10 and it has a very annoying problem. The screen is randomly flickering especiall when set to a low bringhtness setting. Pages with white backgrounds are more noticable but still the screen flickers a lot. Tried to disable Intel HD grapfics power saving but still the issue is there.
any ideas?
It flickers both docked and undocked and on power or AC ... sometimes it stops for 30-40 seconds but after a while it starts to flicker again.
Anbybody else with this issue?
Ivo
This question was solved.
View Solution.

Sounds like a defective panel then, get it replaced.

Similar Messages

How do I lighten a black and white background photo so I can print text on top of it?

How do I lighten a black and white background photo so I can print text on top of it?

Enhance menu>Adjust lighting>Brightness/Contrast

Enabling Grayscale on Text and White Background on Iphone and Ipad?

Request for Apple to view the grayscale function on the App TechPort. This app has the best grayscale function, because it can darken the texts and white background on it site page links. Apple's Invert Color function, does not help my viewing on my Iphone or Ipad. My eyes will thank you, if Apple can grayscale both the texts and white background on it products, like the App TechPort. Thanks

Hi John,
This is a user to user technical support forum, so no one from Apple is here. Send your feedback to Apple at this link:
Apple - Feedback
Cheers,
GB

Isolating a coloured object against Black and White background

I would like to spice up some wedding videos that I am editing. I would like to be able to convert a clip to black and white and then colour in 1 single item. For example, make a red rose against the black and white. Is this a case of like painting the rose or using a matte to isolate the already coloured rose (ie. its natural colour)?? Pretty new to AE (version 6.5, btw).

I think Mylenium meant 'Pleasantville', not 'Smallville'.
Here's an article about this:
"Remove all colors from an image but one"

Can Apple do something to improve font size and contrast in Calendar, Notes, etc? This new fine print and white background is very difficult to read.

The new iOS 7 face of my iPhone is discouragingly difficult to see, and thus to navigate. Calendar is particularly frustrating--tiny, tiny numbers, faint lettering, and a non intuitive interface. So much white screen everywhere is hard on the eyes. I'm already looking forward to the next upgrade. Right now it's sort of reminiscent of the DOS days of old, only black on white instead of white on black!

Thank you! That is an absolutely enormous improvement. Now I have a black and magenta background, with bold black lettering, and my eyes are happy campers! My wallpaper photo looks like something out of a vampire movie, so I'd better change that. QED. Thanks again!

My iPhone won't turn on all the way. It just has the apple and white background

I've tried pressing the top button and home button but still doesn't work

Hello Evelyn,
Thank you for providing the details of the issue you are experiencing with your iPhone. It is definitely inconvenient and frustrating when you are not able to access your iPhone.
I recommend following steps 4-6 below for an issue like this:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPhone before performing the restore:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

No startup sound and white background in the login screen

I realized that the startup sound (Mountain Lion) disappeared when I reboot, and the login screen is white now, instead of the gray usual one. Further, I think is slower then it was usually in the past. Has anyone an idea how I could solve this problem?

This the file you want to look for:
/System/Library/PrivateFrameworks/LoginUIKit.framework/Versions/A/Frameworks/Log inUICore.framework/Versions/A/Resources/appleLinen.png
Changing this file will give you a new background. If you use a full size image, rather than a tiled one, make sure you leave transparent areas in the PNG file to permit use of the dialog buttons. Took me a bit of tweaking to get a good background I use. Be prepared to have to repeat the process every time you do a version update to the OS, as the appleLinen.png is often refreshed in updates.
make sure you follow all good practices. Make backups and only make tiny incremental changes until you are satisfied with the results. Not reccomended for novices.

Pasting color pictures onto a black and white background

Can I get some help with this?

If the images turn grayscale when you paste them but you want to retain their color then first make sure that you're in Image->Mode->RGB Color

Does all imac screen flickers at low brightness?

Hi, I just got the 21.5" imac.
I notice there's this minor flickering problem at low brightness, is this normal?
It seems like it's a known issue after I researched about it.
Is it a hardware problem or a software problem?
Should I exchange it?
Thanks for the help!

Welcome to Apple Discussions,
No that isn't normal, call AppleCare in the morning the number is in your owners manual.
Regards,
Roger

Printing as Black and White

We recently upgraded to X, and have noticed that the Black and White setting for Grayscale is gone. I looked around in the forums and found the suggestion to "Convert to black and white in the Fixups" but my Fixup menu does not have that option- I have options to convert to CMYK and Grayscale, but not Black and White.
We need this option to run film negatives- any Dot Gain percentage as the grayscale setting gives us a dot pattern. Is there any way to get this option back? Otherwise we're kind of screwed. I also tried to install Acrobat 9.3.0, and the Black and White option is also missing on there, even though it's available in 9.5.0 on my other Mac (10.5.8)
Using a Mac, Lion 10.7.3, Acrobat 10.1.1
thanks!
-val-

Hi Val,
Try choosing File > Print. Click the 'Printer' buttom at the bottom. Change the dropdown from 'Layout' to 'Quality & Media'. Check the grayscale button here.
-David

How do you add a colored picture on top of a black and white picture with out it turning black and white too?

I am making grad invites and i keep trying to add a colored picture on top of the black and white background picture and it keeps changing the colored one black and white i am using Photoshop CC 2014! any help is greatly appreciated! I cant figure this one out!

What is the file type? Is it a file that supports layers? Is the color photo in its own layer?
Please post a screenshot of the layers panel.

The eraser tool and the background it produces?

1. Why does the eraser sometimes erase with white vs. the checkered background?
2. Does the checkerboard mean that the background will be fully transparent?
3. How do you switch between checkerboard and white backgrounds for the eraser?
Thanks in advance.

Erasing on a layer will produce transparency. Erasing on a flattened image will produce white (or the background color)

Uneven lid and out of place LED panel

Hi and thanks in advance for any help on this. This past week I noticed that when my MBP is closed the lid is uneven. The front right hand side clearly sits higher than the left. Additionally I realized that in the top right corner of the screen you can see that the LED panel is not lined up with the black border on the glass. It appears to also be like this on the lower right corner of the display but to a much lesser extent. (I tried to photograph this but the gloss of the display makes it impossible to see in the photos). My warranty is still active so is this something I should bother having repaired or just live with? Personally it bothers a good bit but I don't know if I'm just being picky about it. Thanks again.

You should certainly contact Apple and have this condition evaluated, as it sounds like it could be a manufacturing defect which could possibly lead to further trouble on down the line. You definitely want to bring it up while you are still under warranty and something can be done about it at no cost to you.
Good luck!

Final rendering of video is low quality and too bright

Here is the link to my original video clip, the video clip in the project, and the final rendered copy all on my monitor at the same time:
http://i157.photobucket.com/albums/t63/shadon1nja/FixingRenderQuality_zps124306a5.png
Here is the text of each video when fullscreened screened:
http://i157.photobucket.com/albums/t63/shadon1nja/RenderText_zpsd1240701.png
The picture got downsised which makes it harder to see the issue,but here is most of the it:
The final copy is lower quality and way too bright. Noticibly too bright. The clean darks turn into rough gray, and the quality is noticibly lower as well. I have checked the "use maximum render quality" and tried exportiing in AVI and MP4, and nothing is fixing it. Any ideas?

First of all, what type of file do you need? If you're looking for lossless quality then I would suggest exporting a quicktime file with the Animation codec or some other lossless codec. However, these type of files are huge and they might not play back on your desktop. But, if you're just going to put this video on the internet when you're finished with it then I would suggest starting with one of the Youtube or Vimeo H.264 presets and modifying it to match your clip. It still won't look as good as your original, but you can't expect miracles when working in SD and exporting to H.264, which is a very lossy codec to begin with. If you want to try exporting to a lossless Quicktime or AVI, then change the settings so they look something like this:

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Hello,
Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem and apple does not adress this.
Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
Regards

Led panel flickering - noticable in low brightness and white background​s

Similar Messages

Maybe you are looking for

Led panel flickering - noticable in low brightness and white backgrounds