LED screen on X200s died!

Hi all,
the illumination on the LED-screen of my X200s has dies now for the 4th time! Has someone else experienced something similar?
I can see the faint content on the screen, and I can use an external monitor. Everything is working fine, except for the illumination of the screen.
Has anyone else experienced something similar?
thanks in advance,
vok

Sounds like a display power supply problem or could just be a loose connection.  You will need to have Lenovo fix it.  Should be a warranty issue

Similar Messages

  • Mid 2010 MacBook pro took a keyboard spill.  It still works but display is sooo dark - like no backlight.  I think this is an LED screen.  Does anyone know the fix for this?

    Hi all...  My mid 2010 MacBook Pro took a keyboard spill.  It still works but the display is very very dark.  A faint image can only be seen at an angle in very bright light.  I think this model has an LED screen.  Can anyone please tell me what the fix for this is?  Thank you sooooo much! 
    < Email Edited By Host >

    Spill Cleaning
    Some liquid has just spilled into your Mac. What should you do?
    Do
    Immediately shut down the computer and unplug the power cord.
    Remove the computer's battery (if you can)
    Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
    Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
    Note what was spilled on your Mac.
    Bring the computer into an Apple store or AASP as soon as possible.
    Don't
    Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
    Don't shake the computer (this will only spread the liquid around).
    Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • Can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

    Yes. Any standalone display which can be connected to a Mini DisplayPort, with or without an adapter, can be plugged into a Thunderbolt port without any additional adapters.
    (65766)

  • Stains in my imac led screen

    I have my 21.5 Intel core 2 Duo nearly a year now and I have noticed stains not on but in the led screen and also some stains appearing in the centre of screen, from what I can see the fault is in the led screen, can anyone help.  thank you

    Hi Mickey
    Contact Apple Support or your local Apple Service Provider and make arrangements to have it looked at.
    http://www.apple.com/support/imac/service/
    Dennis

  • MacBookPro5,1 LED screen flicker on either graphics card on lowest brightne

    MacBookPro5,1 LED screen flicker on either graphics card on lowest brightness setting. Definitely noticeable and annoying when using the lowest power settings to extend battery life during school usage. Has been happening since I got the machine.
    Also new out of the box the screen isn't aligned properly with the base of the unit. Like it got knocked around during manufacture, anyone have this issue?
    Also my serial number does not show up in Apple's systems as a sold machine even though I have a proof of purchase. I called 800 APL CARE to resolve the issue, they were looking into it and haven't gotten back to me either, this was weeks ago....
    Anyone think I should buy APP?

    Your underpowered system may get by if you edit SD DV material, but is way out of its league when editing AVCHD or Red or DSLR material.
    Without further info to go on, you have the following problems:
    Not enough memory
    No dedicated nVidia video card
    Insufficient PSU
    No hard disks
    About the only thing good about your system is the CPU, but there it ends. Everything else needs to be improved. How much depends on your source material, your workflow, your destination format and all those data were severely missing.
    Edited for content (personal comments)
    Message was edited by: Jerry Klaimon

  • Is the 4g ipod touch retina display better than the 3g Led screen?

    I was thinking about getting an ipod touch but i don't know if th 4g ipod touch retina display is better or the 3g led screen is better?

    How do you get AirPlay on ipod touch

  • Question: T400 LED Screen Resolution Limited to WXGA?

    Lenovo's website (US) is now only showing the following screen options for the T400:
    14.1 WXGA TFT, w/ CCFL Backlight, Camera
    14.1 WXGA+ TFT, w/ CCFL Backlight, Camera [add $30.00]
    14.1 WXGA TFT, w/ LED Backlight, Camera [add $50.00] 
    14.1 WXGA TFT High Nit, w/ LED Backlight [add $120.00]  
    14.1 WXGA TFT High Nit, w/ LED Backlight, Camera [add $150.00]
    Does anyone know why the LED screen is limited to WXGA and not WXGA+?
    I'm looking to replace my T40p, and I'm not willing to go down in screen resolution.
    Thanks,
    RocketDude
    RocketDude
    T400s 2801-CTO

    bananaman wrote:
    There are 14.1 WXGA+ LED models available right now. Check the ThinkPad Reference (tabook) and search. That option is just apparently not available in CTO (Custom To Order) systems from the Lenovo Store at the moment.
    This brings up the question: How can you order a pre-configured ThinkPad like those listed in tabook? Do you have to buy from a reseller? Why can't you order one from the online Lenovo Store? (Maybe you can, but it's not obvious to me how to do it, at least for the U.S. online store...)
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • Led screen problem

    yesterday i accidentally dropped my laptop(compaq610).led screen was gone.i have still warranty for the product. shall i go to the service center and do they change it to new screen for free or else how much do they charge for the screen?can please someone tell me about this?

    A cracked screen is not a warranty item. The only coverage you might have is accidental damage insurance which you might have purchased from the store. You would remember because it is expensive, adding maybe $150-200 to the price of the laptop. So don't take it to the Service Center. They might charge $300 or more to replace it. You can do it yourself for maybe $125. Post back if you want to know how.

  • No backlight on led screen

    Hey,
    I have a HP pavilion dv6-3000so Notebook PC, and it works just fine, but I got a problem with the backlight on my LED screen. The PC was in the rain, and after that my screen had no backlight. So I opened my laptop to check the motherboard and about 1cm/a halv inch from the screen connector I found a "smoked" or "burned" fuse or resistance. It says "CB83" right by it's side. Please help me

    Hello madpire,
    Welcome to the HP Forums!
    Sorry to hear about your notebook. Rain and electronics aren't the best of friends.
    If you can clearly see a burned out capacitor on the motherboard you're looking at a hardware issue. The motherboard is not a part that you can easily change. Not that it can't be done, but after changing a motherboard the product and serial numbers need to be cloned to the device to allow the recovery to be run. Your best option here is to contact our phone support department for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Sorry for the bad news, I hope this information helps.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • T400 question: get 2765T6U or pay more for LED screen & misc

    Hello,
    I'm planning to buy the T400 but got a quick question for you guys. I found the T400 2765T6U at Provantage for about $1200. 
    Unfortunately, this model only comes with a CCFL screen and a few missing features (multiple card reader for example). I then went to Lenovo and configured the Enhanced T400 model with the features I wanted and ended up with $1400 (after a 10% off coupon).
    Do you guys think it's worth it paying $200 for the LED screen, a slightly faster CPU, a bigger HD (though slower), and a 7-1 reader? All the other features are exactly the same as the 2765T6U.
    Thanks in advance!!

    You could try this model: 2765-33U
    http://www.provantage.com/lenovo-276533u~7LENO10Y.htm
    It is like the 2765-T6U but it has LED WXGA+ screen and 9 cell battery.
    The only problem is that it is a "special order" so you may have to wait longer for it to ship (as they do not have it ready in inventory).
    Try looking at the tabook.pdf for more models. To get tabook, just google "tabook" and download the .pdf from the IBM website.

  • Scratches on a Samsung LED screen

    Is it possible to fix scratches on an LED screen?  I have a 60" Samsung Smart TV.  Unfortunately my 3 yr old has scratched the screen with something.  Any ideas as to how to fix them.  They are only visible on very white screens.  Not the end of the world, but definitely not something I want to see on my $3000.00 TV

    I heard rubbing toothpaste on it works. Never tried it tho.. Perhaps you can try and tell us?

  • My iphone 4 is flickering extreamly bad. I just purchased it in july. Whats causing it to do this? It frooze up earlier with a white screen. Battery died and i charged it up it came on to flickering? Help please

    My iphone 4 is flickering extreamly bad. I just purchased it in july. Whats causing it to do this? It frooze up earlier with a white screen. Battery died and i charged it up it came on to flickering? Help please

    Hello Edward
    Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Do I have switchable graphics or not?And led screen.

    Hello!
    I can't find if my t400 has switchable graphic or not.
    I would also like to know if i got LED screen or not.
    My model number is: 6475-WHR
    Please help.

    Hello!
    I can't find if my t400 has switchable graphic or not.
    I would also like to know if i got LED screen or not.
    My model number is: 6475-WHR
    Please help.

  • Replacing iphone 6 LED screen

    I have a iphone6. Due to mishandling, the phone dropped from some height and the LED screen got severely damaged. The phone otherwise is working fine. Please suggest the way to repair this. How much will it cost?

    Bring it to an Apple store to be evaluated. They will let you know if the screen needs to be replaced or if the entire phone needs to be replaced.
    Cost is $109 for screen repair on the iPhone 6. Replacement for the phone is $299.
    More info here: https://www.apple.com/support/iphone/repair/screen-damage/
    And here: https://www.apple.com/support/iphone/repair/other/
    Costs are USD before tax. Make an appointment before you bring in your phone so you're not stuck waiting too long
    ~Lyssa

Maybe you are looking for

  • Printing from acrobat pro 9 with yosemite on iMac retina

    My new iMac will not print an annotated form using a completely updated Acrobat Pro 9.5.5. Is there a driver that is missing? When I try to open the form in "Preview" it comes out garbled. Any suggestions would be appreciated.

  • Processing Canon G10 RAW Images in CS3 and Lightroom 2.1

    I've not found a post on point. If I've missed one, sorry. Contemplating getting a G10. After research here's what I understand. Please, correct me if I am wrong: 1. To process a G10 image in ACR, one has to have 5.2. One cannot use 5.2 in CS3. To pr

  • Reccomendation for NAS

    Hi, not sure this is the right forum, but the closest I could find. I'm looking to get a NAS for for file sharing and (non-Time Machine) backup for Macs running OSX 10.9.4. Could I get some recommendations, has anyone had particularly good or bad exp

  • How to print "- ve" sign infront of a number during calculation

    Hi all right now i am getting the values in the output like this 1.95 - but i have to get that as - 1.95 instead, how do we get that. my calculation is  *wa_menge * - 1*  in the code

  • Cracked Glass on an 8330 Curve

         I have Cracked the glass on my 8330 Curve.  My carrier, Verizon says they can't help.  Does anybody know if I can get the glass replaced and how to go about it..