LED Tv 50L4300EE - Main board issue

hi
My family in iran,  have a Toshiba 50L4300EE LED tv which had voltage shock i guess by thunder, that made the tv don't work anymore.
i currently live in iraq, and i couldn't find the main board in iraq and also not in iran. which made me search in internet for that but i think the internationa model for this 50L4300EE is something else.
Now i've found a main board in ebay, here
which the model is 50L4300U with "U" in the end and not "EE"
i want to know does it fit our model 50L4300EE or not, and if not where can i order the bard
thanks for your attention and reply
Attachments:
Share2014-10-27-60ec3b35f089ed0ab625d9f453504fdb74d111969055c19af8b8e5dc7eece779-Picture.jpg ‏216 KB
Share2014-10-27-500d8c51114202f21e8e870fe27877ea66d6b151be93fe4e9487baad36a7e205-Picture.jpg ‏372 KB

any response please?!

Similar Messages

  • DV7 1000TX main board issues

    Hi, i have a HP dv7, great lappy and over the moon with how it went up until a week or two ago.
    I pluged it in to charge and left the room, returned as i could smell a burning smell, and noticed the laptop had turned off. I turned it back on and it made a small "phffff" noise, display came up as issual and then the unit turned off.
    It now fails to charge, well infact fails to do anything.
    So too youtube i went, and found a handy "how to pull it to bit" video.
    This is what i found.
    I have a man who can replace the chip, but the issue is WHAT IS THE CHIP, or WHAT DO I RELACE IT WITH? I work in and I T Store and have access to IC's but the thousand.
    Some one please help. the cost to replace the motherboard on hp site in my currenacy is 1129 dollers with out postage.
    i've read a few topics on the DV1000 series where the chip could be the same, but dont want to risk it.
    Again please someone help.
    Un happy camper...

    Hi:
    dv7-6165us manual: Page 27 - HP part number 645386-001
    http://h10032.www1.hp.com/ctg/Manual/c02842278
    Specs: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/5082216/model/5...
    dv7-4130sd manual: Page 23 - HP part number 615686-001
    http://h10032.www1.hp.com/ctg/Manual/c02642701
    Specs: http://support.hp.com/in-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4247665/model/4...
    They are having entirely different chipset, graphic system & they are not listed in your laptop model Manual, hence not compatible for your model series - that's all I can suggest. You're changing the back-bone of your laptop to that is entirely new model series.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Main board has blown 3 times in last 10 months on 39" smart tv

    I bought the 39" smart TV aug 2013.
    It has been repaired (under warranty) 3 times to replace the main board.
    The symptom of the TV is it goes only to a black screen, the green LED on the front stays ON, it cannot be powered on or off by the remote or the power button. Only unplugging the TV will 'turn off' the tv, which is only a black screen. Plugging the tv cord back into the outlet and it immediately is power on with the green LED light ON at the front panel.
    Anyone have this issue, or know why a main board blows ~ every 3 to 4 months.
    Also what recourse of action can I take to get a new TV? This one is a lemon.

    You'd need to talk to customer support about that. I'm sorry to hear it.
    - Peter

  • Where can i get a replacemen​t board (motheroba​rd, main board) for H430?

    I have the following desktop that just died on me one day...i was told my main board died.  It has the i3 processor and i was wondering where i can get a replacement board only?  not sure what model or brand to look for so that it drops in my case....any help would be appreciated, thanks!
    Lenovo H430
    Machine type 2558
    Serial ESxxxxxxxx
    Moderator Note; s/n edited for member's own protection

    hi polyskilz,
    I recieved your Message.
    This is the Default Mainboard of your unit.
        Category          Part No.           Part Name
    MAINBOARD
    11200369
    E H61 MATX 1.0 95W MB @RTL8111F_A662(R)
    You can check the part with Lenovo Spareparts for ordering
    http://www.lenovospareparts.com/11200369--E-H61-MT​X-MB-10-MB-95W_p_1050.html
    or you can check it with Online resellers,
    Don't get confused about the K410 thing online, as this board is also mounted to a K410 same with your system.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Blown 23" Cinema Display -- main board? or Inverter?

    I bought an Apple OEM Nvidia Geforce 3 for my G4 Cube, and the idea was that it should power my 23" Cinema Display (clear). But the monitor became blown when I connected it to an incompatible video card -- although the power light comes ON, the screen fails to illuminate.
    I'm hoping that someone can contribute to a diagnosis of my Display's problem. Here is the situation:
    The online Authorized Reseller "The Mac Support Store" sells various parts for this monitor. There appear to be two choices:
    1) The main board for the 23" Cinema Display is offered here:
    http://www.macsupportstore.com/product.asp?pf_id=922%2D5582
    and...
    2) the inverter board is offered here:
    http://www.macsupportstore.com/product.asp?pf_id=922%2D5581
    But which one should I buy?
    I realize this is pretty lame, inviting a stranger to diagnose a monitor he's not seen, but... you never know. Maybe you know what you're talking about. You probably know more about it than I do.
    Is there a good reason for suspecting that the blown Display is the main board? Or the inverter board?
    Thanks.

    Hi,
    I don't know whether this will be of help but last year I started having all sorts of problems with my 23" Cinema Display. I replaced the power supply 'brick' - but still had problems (blank screen etc) - read lots about issues with these displays. I was running 10.4.11 - In the end I tried re-installing the system on another drive up to 10.4.8 - and it's worked fine ever since (it also cured a number of other weird problems) - ok, so I can't get the latest itunes software - but at least I have a screen that works. It seems that anything above 10.4.8 causes problems on my G5 Dual Power PC.

  • HP 8440p replacemen​t main board

    Hi folks,
    I have just replaced the main board in a 8440p laptop - the hardware issue has now been resolved.
    Does anyone know how to change the serial number in BIOS to the correct info for the device? I cannot see an easy way to amend the default number set from the support centre?
    Cheers
    Paul

    Hi, Paul:
    Unfortunately, HP does not have a BIOS "tattoo" tool to set the serial number. It can only be done by an HP tech who has access to the software.
    Accordingly, you will need to contact HP support to have this done for you.
    Paul

  • Elitebook 8560p main board failure

    Apparently this is a common problem with the main board failing - I bought 2 at the same time for my office and one went out just before warranty ran out.  I'm told only refurbished boards are available and that it may be better to put the money into a new laptop/notebook.  Any useful info would be appreciated.  I still like this notebook even with this apparent inherent problem.  Bought in September 2011 so was hoping to get another 2 years.....

    Hi Patricia_s,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Here is a link to the manual page 49 for the system board. You could just google the part number or HP Parts Surfer.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Ipad main board blue screen

    Hi, I was buy a iPad air in USA, but I think the main board have some problem, some time it will show blue screen and auto reboot, can I warranty in the UK?

    Hi Wenbin Lin,
    I had the same issue with my iPad Air, 64 GB, wifi only. I believe it is a hardware issue, they replaced mine with a refurbished one when I briught it to the Apple Store. If you just bought it, you can bring it to any Apple Store and have it repaired or replaced for 1 year from the date of purchase.

  • MBP Boots sometimes - If logic or main board bad, what can I expect?

    The Symptoms:
    MBP Boots only occassionally. When it does not fully boot you can hear the disk and fan very slowly wind up, over the course of a minute. There is no startup chime. The screen never comes on and remains dark, no external monitor comes up, the keyboard and usb ports are disabled, and the latch light glows steady and dim. It doesn't repond to startup key commands and the disk you can hear doing something but nothing comes on.
    I've swapped out the ram, booted into safe mode (when I can get it to boot), run disk utility and disk warrior, among other tools, booted from a flash drive to run diagnostics. Disk checks out fine, zapping pram, resetting smc, all this does nothing. Genius bar did diagnostics and couldn't find anything wrong, but offered me the repair depot.
    Conclusions:
    So after researching many threads the past few days, a trip to the apple store with some diagnostics, and further testing/swapping ram/resetting pram and smc, I've come to the conclusion that I must have a problem with the logic board or main board. My computer only starts up after about 5 cold boot attempts and/or some of the above processes. Once it's up and running it's fine. When it doesn't boot the drive spins up, the fans come on, but the screen/keyboard/usb etc are all inactive, and the latch light is a steady dim white. When the computer does boot it runs fine.
    Question:
    My question is, should I expect more serious problems in the near future, or is it at least possible that I could limp along for some months in this condition? I have the option to possibly submit it to repair depot for refurbishing, but if I could make it at least through some june update news I could make a more informed decision about what to do.
    Any and all information, experience, or suggestions are much appreciated. 

    I agree with you that the people who staff the genius bar are not genius' but technicians, and are of varying degrees of competency.  However if you are offered what is referred by some as a 'depot repair', consider it very seriously.
    My experience is as follow with my old 2006 MBPs:  Several years ago I had a serious problem with the display and was offered said repair that would fix the display issue and any thing else that was found to be faulty.
    The following was replaced;
         The Display
         The Optical drive
         The Airport card
         The top cover
              (the old one had dents in it and there was no expectation on my part that it would be  replaced)
          The keyboard
          The bottom case
          The RAM cover
    The total cost was a fixed price of $310 which was told to me up front.  That is what I paid (plus tax).  The invoice showed a total of $1240.  I still have that MBP and it still looks and operates as new.  This repair was not done locally, but at an off site location.  I suspect it was done by very well qualified technicians.
    If you are offered such an option and your budget can accommodate it, I suggest you take it. You also get a 90 day warranty with it.
    Ciao.

  • MBP 13" unibody main-board failure after 1 year and 10 month. Apple does not care!!!

    Hi Apple Communites!
    I have a big problem with my MacbookPro. I bought my MacbookPro in december 2010 in Thailand. 5 days ago My MacbookPro suddenly switched off and never start again.
    So I sent it to Apple Dealer in Phuket, Thailand to check. Now they told me it is the main-board failure and i have to change it on my own cost.
    And it is 26000 Thai baht (870 US Dollars). How comes that Apple do not take care for my cost.
    My MacbookPro is not two years old. For this price i better buy a new PC notebook.
    Can some of you please help me for a solution or answer? I use Apple almost 10 years and never have problem like this. Or Apple do not taking care of their customers or quality products anymore?  lertlid trzop

    you are right!! but is this the quality product of Apple that lasts for just 1year and 10 months?
    If it so then i think about to go back to PC after 10 years using Apple products and no one from Apple cares about customer service and quality.
    Sad Story about Apple. What Steve Jobs and Tim Cook gonna think about this.

  • After replacing main board how to install OS X

    Hi guys,
    I had lots of problem with my late 2011 macbookpro, after Apple's main board replacement program, I gave my computer to the service( not apple store, because I don't have one in my city). Now they changed my without any payment but they didn't install any OS X in to my computer and they want to charge money for installinng OS X. Is it normal? (My first question)
    I am trying to install OS Xit but I couldn't manage ( when I gave to my computer to the service I have mavericks by the way.) Now When I enter Os x utilities menu and press reinstall Os x. Os x mavericks screen is appeared. I am connecting wifi and entering my apple id but it says 'This item is temporary unavailable . Try again later'
    Can you help me what can be problem?? How can I install OS X my own?

    My opinion is that you should have had an OSX installed as part of the replacement process.  But my opinion counts for little.
    Try this:  Boot the MBP with the OPTION + COMMAND + R keys down.
    If successful, you should see a revolving globe.  By following the directions, you will be connected to the Apple servers and should be able to install the original OSX that came with your MBP (Lion was the OSX for late 2011 MBPs).
    You will need a solid Internet connection.
    Ciao.

  • I need to get photos off a water damaged iPhone 3GS. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

    I need to get photos off a water damaged iPhone 3GS. It spent time underwater, saltwater. I let it dry for a week, turned it on, the apple symbol came on, then it died. I need to retrieve my photos off it. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help

    You're talking about the logic board. The two most likely things to get toasted, with water damage, are the battery(it shorts out), & the logic board. The worst water damage would be salt water. I'm afraid your logic board is toast.

  • I need iphone 5 main board. from where i can get it

    Have anyone know the apple spare parts shop and the price of the iphone 5 main board.

    Apple does not sell spare parts to anyone, anywhere
    Apple refurbishes all faulty iPhones not repair them

  • T400 System board issues

    Has anyone else been having issue with the T400 and the System Board.  I have had 5 now that stop booting.  All you get is the power light, battery light and the plug light when plugged in.  Hit the power and nothing comes up.  I tried removing the battery and same thing minus the battery light.

    I am also facing the same problem. Looks like Lenovo is loosing it credibility and integrity, it previous used to have, especially for Thinkpads.
    I am already living with WiFi problem for my T400. Now this System board issue. Really tech support also not good at all. 

  • 770 c-45 Main Board And dd3 Ram problem

    I bought 4 computers that used 770 c-45 Main Board  and a data 3 x 2 gb 1333 mhz 7-7-7 20 Kit
    I am having frozen problems. And trying to solve for 20 days.. The last one i saw clk 9 -9-9 24 on bios ram setting. I called to Turkey Main Seller Firm and tecnical worker has told me they have lived same problem as ours. He said me should set rams 7,7,7 20 on bios. But i checked and i couldn't do..
    Is there any dear helper to help me:=)

    Quote
    a data 3 x 2 gb 1333 mhz 7-7-7 20 Kit
    Did you buy a Tri-channel memory kit for Intel systems? If so, you bought the wrong memory. Read the memory sticky topic up top...
    AMD64 CPUs have a dual channel memory controller, you need 1,2 or 4 sticks for best operation.

Maybe you are looking for

  • Material Ledger config

    Hi, I need to activated material ledger with different exchange rates. I never done any material ledger config. Can anyone help me regarding the configuration steps from material ledger with different exchange rates. Any input would be appreciated. T

  • Inserting Pictures into cells

    I want to catalog a set of pictures and add meta-data in adjoing cells and then be able to sort the resulting table based on the meta-data and have the images sort with the meta-data (that is, have all of the cells within a row stay together). Is tha

  • How to read the business partner activity

    Hi experts, How to get the business partner(role:employee) assigned activities  in crm and how to create the activity .my requirment is change the assiged from old employee(bp) to new employee(bp). i have to develop the program. i searched some BAPI'

  • Problem Printing onto CDs from Photoshop CS5 - Canon MG6150 printer

    I cannot find a solution to this problem anywhere!! I have a Canon Pixma MG6150 printer and have designed a CD/DVD label using Photoshop CS5. The proportions are all correct, when printed on paper from within Photoshop I can cut out the label and it

  • Alarm clock or gunshy

    HI! 1) Do you know of a simple freeware "alarm clock" type of app, that I can set for a meeting time and have it buzz or boop or whatever? 2) Do you know of a freeware copy of Gunshy that won't freeze when I win? Alternatively, where would you go to