LED TV

IF you decide to purchase an LED or for that matter any tv from BustBuy.  Make sure you have them take it out of the box, plug it in, and test it, before you take it out of the store.  If it is defective the only solutions they will give you is : Take it to the manufacturer yourself or wait for them to send it out to service...
Will never purchase anythinelse from Bestbuy!!!

I actually did just that. I purchased a 32" LED TV friday night and opened it up in the store before I left.  I definitely recommend that as once you walk out there is no way for the store or the  company to know if its damaged and who damaged it.

Similar Messages

  • What's wrong with my LED screen?

    what should I do when my computer have the following problems:
    1、LED large display (rectangle) and appeared splash screen phenomenon recently, but the power light is on.
    2、When played PPT file, the display is normal,but after a while,the screen splash phenomenon appeared .If I restart the LED power ,the screen will normal again.
    3、2 days later, when I turn on the computer and the LED display and then play PPT file,the LED display appeared black, but the LED disply power is still light .I have tryed to restart the LED power and re-plug the transmission line,but have no any effect.

    splash screen phenomenon
    I do not understand what that looks like.
    Can you explain more?

  • !!! We Want Design-Specs Of The MEGA LED-displays !!!

    Every once in a while someone opens a topic in which he/she askes for a possibility to control the LED display. Some have even sent e-mails to MSI support, only to receive no for an answer. I see no reason why MSI could not release more details about the LED panel, specifically because most of us feel like a bunch of Beta-testers. Hey, we don't even ask for a complete SDK-kit, I think that sufficient knowledge about (hardware)programming is available amongst the users of this forum to make direct use of the design specifications.
    Therefore I would ask you to reply to this post to make a general statement towards MSI, and hopefully convince them of releasing the so-wanted data.
    JaDi.

    I think you know that I want this for a long time:
      sure I will support you
    But unfortunatly I see just two solutions for this problems you won't like:
    [list=1]
    We program it
    We all travel to the Taiwan headquarters and start a hunger strike on front of the main building.[/list=1]
    I prefer 1  
    Second thing: I worte to MSI (germany) for the specs of the LCD and they transfered by to a technician/programmer in Taiwan. After his holiday he told me that he mustn't give any information about it out. This is again one more example of data protection that just blocks every kind of progress. At the moment I AM expecting an SDK. I won't spend my whole free time to do THEIR job - well and if I do - I'm sure I will charge. I've seen this trouble with the girder plugin which was very very little work compared with an LCD control - enough is enough
    Why should anybody of us HELP MSI do make their products more attractive? That's what it's really all about.
    Regards
      Nathan

  • K7T Turbo Limited Edition d-led one green led 3 red leds is it my mobo?? that died

    Hi people   my girlfriend whas just printing somthing when the screen went black and te noise came out of my system...
    I wasn't there but when i came home i opened my system and turned it one ... the D-leds went on (1 green 2,3,4 red and some noise came from my speaker (lika a weak alarm)
    Swiched my video card, memory and my harddisks but no improvements. I don't know what the D-leds mean  
    I need some help here guys  

    So it is the cpu or the power supply ... if i am right the txt belongs to the picture
    I think it is best to bring this machine to a supplyer, becouse i don't have a power supply unit and i can't get that freaking heatsink of the damn cpu ( ) that #$#@#@ piece of @##@@# wont get lose without risking me sticking a screwdriver trough my mobo.....
    - The D-LED will hang here if the processor is damaged or not installed properly
    or you have a weak Power Supply Unit.
    Early Chipset Initialization
    Thx for the great support guys...  
    If you think i should try somthing else that would help ... please let me know.

  • Caps lock/scrol​l lock/num lock/ LEDs not working - instead pop-ups in bottom RH corner of screen

    Specific details; p/n: GS066PA#ABG,  4 GBytes DDR2 RAM, OS Windows 7 (6.1) Ultimate Edition 64-bit Service Pack 1 (Build 7601) DirectX 11.0.  LED's were working but during one of the windows automatic updates they stopped working.  I don't know which update.  Now I get little pop-ups "CAPS LOCK: ON" etc (black text on white background).  If I rename bttray.exe to bttray1.exe and restart the laptop, that kills the pop-ups in the bottom RH corner of the screen but it does not restore the operation of my blue indicator LED's.  Can anyone help please?

    Hi @haggis1 ,
    I saw your post regarding the problems with the pop-ups and LED lights not working after a Windows Update. Most likely there was a problem with the update when it was installed. This Microsoft Support link will show you how to uninstall an update. Try uninstalling the most recent updates and the restart the notebook and see if the LEDs start working again.
    If that fixes the issue then there is another section in that link entitled: I remove an update but it gets automatically installed. That will show you how to hide an update.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • How to display numbers in LED form

            I am doing  a demo software of HP33120.In this case,I will display the number and unit in LED form according to the real instrument.I don't know how to do it ,please help me.Thanks. 

    Hi,
    The simplest way to do this, is to download the "7 segment font" from the following link.
    Creating your own customized indicator is also an option, but far more time demanding.
    http://digital.ni.com/public.nsf/websearch/5DCD38A1D020155386256DA9007DF506?OpenDocument
    Let me know is this is not what you are looking for.
    Regards
    Meister
    NIDK

  • IPhone 6 Plus LED alert not working.

    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • Iphone 6 plus led light not working in 8.3

    I updated to 8.3 a few days ago and have just noticed that my led light does not work.
    I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • Horizontal shifting bars on MBP 15 after disconnecting 24" LED cinema display and waking up from clamshell mode.

    I use my MBP 15 (late 2011) with 24" Apple LED Cinema display in a clamshell mode. After disconnecting external display, and opening display, it shows horizontal shifted bars, so it becomes completely unusable. Have to hard reset laptop. Any hints on how to resolve this? Thanks.

    Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
    So my power settings look like this:
    Currently in use:
    standbydelay         4200
    standby              1
    halfdim              1
    hibernatefile        /var/vm/sleepimage
    darkwakes            0
    gpuswitch            2
    disksleep            10
    sleep                10
    autopoweroffdelay    14400
    hibernatemode        0
    autopoweroff         1
    ttyskeepawake        1
    displaysleep         2
    acwake               0
    lidwake              1
    standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does.

  • I had a trial version, and tonight I bought it.  But buttons led me to the Windows version which I accidentally bought.  I have Mac.  What do I do?  How do I switch it over to a Mac version?

    I had a trial version, and tonight I bought it.  But buttons led me to the Windows version which I accidentally bought.  I have a Mac.  What do I do?  How do I switch to Mac version?

    Hi scarabs55,
    Are you working with Acrobat or Photosohp? (You mention both PDF files and photos, so it's not clear.)
    Let us know what software you're thinking about upgrading and we can point you in the right direction.
    Best,
    Sara

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • InfraRed Receiver LED

    Dear sirs,
    when I've got a new MacBook and once again at home I have seen that my IR window was flashing with white light. Now it is not flashing. Remote control working correctly.
    When IR Receiver window should to flash with light?

    Dens Discover wrote:
    Dear sirs,
    when I've got a new MacBook and once again at home I have seen that my IR window was flashing with white light. Now it is not flashing. Remote control working correctly.
    When IR Receiver window should to flash with light?
    That's not the IR receiver. That's the sleep light. It goes solid if in a reduced power state, and starts flashing like a "heartbeat" when it goes to a sleep state.
    http://installingcats.com/2008/10/15/macbook-sleep-led-apple-bling/

  • MagSafe LED always amber - Battery won't charge past 90%

    My 2007 SantaRosa model also suffered from the Navidia 8600 chip failure and I took it in for diagnosis and repair under them unannounced 'recall'. I got it back and all was working just fine... for the first week. It was actually working better than before, and still is except that quite suddenly, the battery has stopped charging all the way up to 99-100%, and the amber light on the MagSafe adapter of the charger will not change to green. Right now the battery will not charge above 90%, and the charger has been attached over-night. The charger is not over-heating as far as my touch can tell, there is no fray in the MagSafeplug, it is clean and it is plugged into a reliable outlet.
    Yes, I did do an SMC reset, ran the long version of the Apple Hardware Test from the install disks, and did do a battery recalibration. The Hardware test indicated that there was no problem with the laptop, and as part of the logic board replacement due to the Navidia problem, the Apple techs also had successfully run the full course of diagnostics - no problems indicated.
    I have a second battery that I installed and still get the same result - incomplete charging and constant amber LED.
    Any of you had this problem or have suggestions of another route to follow in troubleshooting this pain the the rump?? I've Googled this problem to death and not seen a page that mentions a problem where the MBP charger amber light stays on constantly with incomplete battery charging.
    Let's see if the collective powers of this forum have the solution! Thanks in advance to all...

    and I took it in for diagnosis and repair under them unannounced 'recall'.
    Take it back ASAP. If the problems started after the logic board replacement (that's the nVidea fix) then something about the new board or the way it was reassembled is wrong.

  • MagSafe LED issue

    I own a MacBook Pro for 6 months now, and it always worked properly. Still, I'm concerned about the recent behaviour of its MagSafe connector. Its LED was usually always lit green when plugged on and the battery was charged, but since around 15 days, although it's lit green when I first plug it, it turns off (without cutting off the power, as the icon on the menu bar shows) around five minutes later. If I unplug, then plug it on again, it lits up normally, just to fade some minutes later again. I searched mostly all the web and didn't find any other case like mine. I wonder if it has anything to do with the battery firmware upgrade Apple released a few days ago... Am I too concerned?

    Take a look at the pins inside the connector and see if any are stuck. I had one that would stick on my old MacBook that would cause some strangeness like you have. I would "thump" it with my finger or on the side of the table and it would pop the stuck pin and everything would be fine for a few weeks until it happened again.

  • Magsafe not charging, no led

    Hi,
    My magsave cord broke, I worked till batterie 0%. Bought a new Magsafe.
    But now the magsafe is not charging and the led light wont shine orange or green.
    I did a smc reset, a pram reset, took the batterie out and push the button till it went off. Tried SMC 1.4 update but stated not needed.
    Cleaned the connector pins on the mbp with alcohol.
    So i figured the magsafe does not work, took the old broken one apart and fixed the cable. Gives power again, but also no light and no charging.
    The batterie looks fine, apart from empty:
    Charge Information:
      Charge remaining (mAh):          0
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          5908
      Health Information:
      Cycle count:          325
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          9937
    Does any body have a similair problem and found a fix, please let me know.
    Thanks!
    Peer
    PS:
    I have a Macbook Pro 17 inch, late 2008 (?) 2.33 GHz Core 2 Duo
    Osx 10.5.8

    If I've understood correctly, you still don't know whether either of your adapters is working properly. Test them both with the 15" MBP you mentioned and see whether they work. If either one does, but it doesn't when you test it with the 17" machine and its new battery, then the logical conclusion is that there's a problem with the charging circuitry in the MBP -- subject, of course, to confirmation of the presumption that the new battery is actually good. You may have to visit a Genius Bar or authorized service provider to get that confirmation and have everything tested conclusively.

  • MagSafe LED Green, but Battery Not Charging to 100%

    I got my MBP 15" (the "low"-end version) about 3-4 weeks ago. About a week ago, I noticed that when working on my computer with the AC adapter plugged in, it charged up to 98% (according to both CoconutBattery and the Mac itself) and then stopped; the day after, it only charged up to 96%. That same day, I had the entire MBP replaced because of an issue with a faulty latch, and though I mentioned the battery % issue at the Geek Bar, I was told it isn't a big deal and should be taken care of by virtue of the replacement MBP. However, 2 days after, I notice that once again, my battery charges to only 98% and then stops; again, the MagSafe LED is still green as if it were fully charged.
    Is this a problem/will it keep degrading? Or is it just normal? Is there any way to fix this?
    Thanks,
    ~Ethan

    Hi EthanRT: This is perfectly normal, battery behaviour. There is an explanation in this Apple article: http://support.apple.com/kb/TS1909?locale=en_CA
    Enjoy
    Stedman

Maybe you are looking for