LEDs on caps lock, sound and wireless keys are not blinking any more

I have Pavilion g6 2103 tu notebook with windows 8 OS. The LED s on the caps lock , wireless and sound keys are not blinking for few days. can any one have the solution please?? thanks

Hi @rajiv29
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the LEDs not blinking on your Pavilion. Is there something else wrong with your Pavilion or just that those lights do not come on?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Caps lock, delete and tab key are not working on my Apple wireless keyboard

I see that a lot of users have had this same issue. I have tried all the "tricks" suggested, but keys are still not functioning.

Try a smc reset
http://support.apple.com/kb/HT3964
Try a pram reset: power off, power back on holding the keys: option, command, P ,R (no commas) press them before the start chime, and hold them till you hear the start chime 32 times, then release and reboot.
If still no joy try a safe boot, power off, power back on holding the shift key. Continue to hold the shift key till you see the progress bar, let it finish booting, and see if t works.
The code thing is wierd.
If none of these help your issue, bring it to an APPLE store or a AASP and have it checked out it have a bad top, or logic board/HD.
ATB

Laptop DV7-6b51ea - Unable to Start -Caps Lock lights and F12 key on Keyboard blinking

I bought this Laptop Laptop DV7-6b51ea around 9 month ago - and every time I press start key its Unable to Start - and the Caps Lock lights and F12 key on Keyboard blinking. so I have to restart couple of time befor I could see anything on screen.
I searched in forums and got different reviews some said its memory problem some said its serious motherboard and graphics issue.. please Help !!!
please advice its a brand new Buy from HP UK store

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and see if the notebook will start.
If the above fails to help, as your notebook is still under warranty, contact HP and arrange to have it repaired - you can check your warranty status Here.
If you live in the UK, contact HP starting Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IPad and wireless keyboard do not pair any more

I always had (minor) problems, wehn vonnecting iPad and keyboard. But now iPad and wireless keyboard do not pair at all. Tried 15-20 times, fresh batteries, switched on an off, tried manually - nothing. I noticed that the green LED of the keyboard shines just for about 3 seconds when I switch on - but this has always been like that before. Latest OS of course. Who can help, please?
Lothar

Hi Lothar,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful if you are no longer able to pair your iPad with your wireless keyboard:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Best,
Jeremy

Bootup Blank Screen - caps lock light and wireless light only keep blinking

Hi
My HP compaq 420 was frozen, last night I forgot to shut down then when I press power button no display, fan keeps working and Caps lock light is kept blinking
I tried to remove battery and pressed power button for 60 sec but no response and I checked my RAM as well it perfectly alright.
Please help me.
Theepz

Hello kiranreddy,
Welcome to the HP Forums.
It appears that your Notebook is not starting, that you have a blank screen and flashing LED's. I will try to help you with this.
I would like you to start with this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps. This will help to try to identify if the Notebook is providing an error code. If it is, it will also provide steps to attempt to resolve the issue.
Please let me know how you make out with this. If you require further assistance with this please provide the Model and Product numbers for your Notebook. (How Do I Find My Model Number or Product Number?)
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Apple AL Bluetooth Keyboard - Tab, Caps Lock, Function and Control keys just stopped working

Hi All -
All of a sudden I get on my baby, 27" iMac OSX 10.6 and the some keys on the bluetooth keyboard do not work. Specifially the Tab, Caps Lock, Function and Control keys. I'm fine with the caps lock gone (why is it there?) but the others are useful.
I've searched all over for a solution but I haven't found one. Tried to upgrade the firmware which is fine, reset the PRAM done, checked the speech per apple support nadda.
Please help.
Thanks
-M

Hi
Go to System preferances > Universal Access > Mouse or Mousie and trackpad > and turn your Mouse keys off.
Then disconnect and reconnect your keyboard.
Note that you don't open your mouse under hardware in System Preferances, this is for a whole different group of settings
Hope This helps

HT4818 my zero and nine key are not working

my zero and nine key are not working and also //////// symbol sometimes keeps repeating

Try an external keyboard. If it works, you need a new internal keyboard.

"backspace", "g" and "h" keys are not working.

hello,
my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
suddenly the "backspace" , "g" and " h " keys are not working.
please help me, because i have to complete my university assignment as soon as possible.
tank you,
shehara

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp pavilion dv6 backspace and enter keys are not responding

In my hp pavilion dv6 2158ee system backspace and enter keys are not responding.

Hello pvz,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue of certain keys not functioning correctly.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.

This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that.

My O, L, and '.' keys are not working!

I have a question. I have a PowerBook G4, 1.5 GHz, Aluminum. Recently, my "o", "l", and "." keys are working intermittently. Half the time, they do not work. This is not a software problem as I have an external keyboard. Does anybody know what's going on??? I don't.

Sounds like a cracked trace on the keyboard PWB. Best to just replace the keyboard. You might get more information at this link:
http://www.powerbookmedic.com/Powerbook-Keyboard---G4-Aluminum-p-16506.html
Replacement can be a bit involved:
http://www.ifixit.com/Guide/Installing-PowerBook-G4-Aluminum-15-Inch-1-1-5-GHz-K eyboard/223/1
In this case, the Titanium models have the Aluminum models beat, as replacing a Titanium keyboard is a 2-3 minute process, tops.

Satellite C50-A-15Q - arrow, question mark key and z key are not working

I have a Satellite Pro, C50-A-15Q. All keys were working fine yesterday, today I turn the laptop on and the arrow keys, question mark key and z key are all not responding. Any idea how I can fix this?
I have tried turning the laptop off and on, hoping (naively) that this would fix, but to no avail.

As Tom already wrote, it is not easy to say for sure if this malfunction is result of defective keyboard or maybe keyboard controller. In my opinion troublemaker is the keyboard itself.
Have you maybe updated BIOS or done anything that could be responsible for this?
I presume your notebook is pretty new model with valid warranty so best option for you is to contact nearest Toshiba service provider and ask for help.

HP OfficeJet 4500 and OfficeJet 4600 both not copying any more but will scan and print

My computer/networking business has 3 HP OfficeJet AIO printers: 2 x 4500 (about 2 years old) and 1 x 4600 (about 6 months old). Only the one 4500 is still able to do everything it should. The others can both print and scan but can't copy any more. (The failures happened at different times). I have no idea about faxing because we never use this function - we don't have a landline to test it.
This is nothing to do with the PCs because we're just trying to use the standalone copy function directly from the printer. It makes no difference whether we place the document on the glass or in the auto sheet feeder. At one point, the 4600 was able to make colour copies but not mono copies but now it can't do either.
We have always used only genuine HP cartridges in both printers and they have been replaced recently - as I say, we can print fine, we just can't copy.
Clearly this isn't a software/driver issue but I can't understand how it can be a cartridge or scanning issue either (you can hear and see that it scans the document, it's just that nothing comes out on the paper). Is there some kind of firmware linking the scanning to the printing function that could have gone wrong? If so, how do we fix that? The 4600 self-updates using its wireless internet connection so it should be on the latest firmware.
Thanks.

Hi,
Please try printing a Self Test report for both of the printers, can you see both Black, Cyan, Magenta and Yellow colors listed as expected?
Below are the steps for the 4500:
http://support.hp.com/us-en/product/HP-Officejet-4500-All-in-One-Printer---G510g/3919445/model/39194...
For the 4630 print a self test as following:
On the printer control panel, press the Down Arrow () to scroll to Tools, and then press OK.
Press the Down Arrow () to scroll to Print Quality Report, and then press OK. The printer prints the test page.
Figure : Example of a Print Quality Diagnostic report with no defects
If both of the tests appear fine, is the printer connected directly to a wall socket or may it connected through any power strips, hubs, surge protectors. etc.?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LEDs on caps lock, sound and wireless keys are not blinking any more

Similar Messages

Maybe you are looking for