Left and right click at the same time?

Is there a way to get the magic mouse to do left and right click at the same time? Useful for well.. gaming.

Check out the free Magicprefs software. You can then assign different functions to different clicks. swipes, taps, etc. There is an option for a two finger click and one of those options is "hold both right & left". It's free so you have noting to lose.
HTH

Similar Messages

  • My left and right click on the trackpad don't work.

    From reading a number of the posts here, it would seem that trackpads not working is an issue that Apple may need to look into. I have personally resorted to using a mouse and the trackpad as a touchpad. For all the finger gestures, my trackpad works fine, but it doesn't respond at all to the left or right click options. It clicks audibly, but neither responds. There were some posts about playing around with a PRAM (whatever that may be), but surely there must be a more definitive solution. Does anyone know if this is an issue that is being addressed by Apple or does anyone know of a permanent solution? I don't mind continue to use the external mouse, but it seems a shame that the trackpad malfunctions and there is no apparent solution; that's unlike an Apple product. Your input would be appreciated.

    This fixed it :
    "Solution:
    With the laptop open, turn it on to it's side. Repeatedly click the trackpad with a firm, but not excessive amount of force. Put the laptop on the other side and repeat.
    I can't explain why this works. Perhaps some amount of debris or dust has built up under there ? I went from not being able to click-drag without an excessive amount of pressure, back to a normal amount of pressure after doing this."

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • My HP pavilion G6 notebook PC the touch pad works however not left and right click pads

    Hi all, new here so go easy with me ) I have a new HP pavilion G6 notebook PC, the touch pad works however not the left and right click buttons? Checked in control panel and can not find a way of enabling them. Also unable to scroll down a file in the window without using the actual scroll down bar on the right of the screen...any solutions please? 

    Hi Sy,
    First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53851.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, restart the notebook.
    When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Now follow the directions under the sub-heading 'Adjust horizontal and vertical scrolling' in the document on the link below to configure the scroll options as you require.
    Configuring The ClickPad.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hi there guys i got an ipod 4 generation last yr in August and it dosent turn on properly it shoes the apple and freezes ive even tried clicking off and home button at the same time but still no outcome pleas help thanks guys

    Hi there guys i got an ipod touch 4 generation last yr it turns on and shows the apple but then freezes ive even tried to click the home button and on button on the same time but it restarts and freezes at the apple any suggens to fix it guys please thanks heaps guys

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Touchpad left and right clicks don't work on Yoga 2 pro

    Hi,
    I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
    I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

    Hello,
    I've had a Yoga2 Pro now for six months or so.  Just recently the left click stopped working correctly.  What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click.  Sometimes it works, sometimes it keeps stopping.  
    Now, the right click is malfunctioning as well.  I press right click on something like an image, and nothing happens.  I have to right click on something 2-10 times now for it to register that I'm right clicking.
    Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which  can)?
    I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix.  I'm hoping its not a hardware malfunction.  I am running Win 8.1.
    Thank you.

  • 2011 17" MBP TrackPad Left and Right Click Intermittent in Win7/64

    A few weeks ago I installed Win7 Pro 64 via Bootcamp in a new 2011 MBP 17 (2.3gig).   Since day one the trackpad left and right click buttons have been intermittent in Windows only. 
    For example, while surfing the web some clicks work, others don't, often have to repeat clicks to get it to work, then next time it will work the first time. This is not just a Safari problem, it happens in every program including the Finder. 
    I think it is a driver issue and Apple needs to get on the ball and fix the problem and send out an update (yes I have the latest version).
    I saw where a guy had written drivers to address the problems with the low quality Apple drivers.  His is called TrackPad+++ but it is bloated and I'd rather not install it nor should have to.
    Anyone else having this problem or found a good solution?   BTW an external USB mouse works great.

    After a little bit of looking around i found my answer! Use the BootCamp Control Panel that you can call up by clicking on the boot camp icon in the notifications panel. There one can enable tap to click, dragging, and right click.

  • CS6: No more Left and right arrow in the timeline

    Hi everyone,
    Adobe removed the left and right arrows in the timeline. I don't understand why because it was a functionnality that I was finding very convenient when comes the time you have to move accurately in a zoomed timeline. The moving bar doesn't work very well in this kind of situation.
    Do you now if there is a convenient way to do the same wihtout these left and right arrows ?
    Thanks

    If you are referring to these arrows in the CS5 interface:
    They have been removed in CS6:
    note:
    If you're new to CS6 from CS5, just wait until you try to select
    a transition vs. a cut point in the Timeline.

  • How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

    How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

    If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
    Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
    (I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
    I hope this helps.

  • Time Capsule and 2 macbook at the same time

    Hello,
    I have a time capsule and 2 macbooks.
    Therefore, when my macbook is doing a backup ( every hour), my collegue cannot acces to internet, and cannot backup at the same time.
    But it looks like this problem is only one way ( I mean when my collegues backup, I don't have any trouble to go on internet).
    Anyone can help? cause it's really annoying.
    Thanks

    Ngarraud,
    Try this:
    *Multicast Rate / Transmit Power*
    Launch Airport Utility.
    Select your Time Capsule on the left.
    Click "Manual Setup".
    Select "Airport" from the toolbar at the top.
    Click the "Wireless" tab.
    Click the "Wireless Options..." button.
    Check the setting for "Multicast Rate".
    This setting controls the range at which you allow devices to access your network. Lower is better if you want access throughout the house. But this setting won't improve speed. Tesserax has a nice explanation of this setting in the following quote:
    +"The Multicast Rate option sets the threshold throughput level a wireless client must obtain in order to be "accepted" by the base station. The lower this value, theoretically, the greater number of clients that can connect, especially those at greater distances from the base station. At the opposite end, the higher this number, only those wireless clients that can achieve the higher throughput value will be able to connect.+ [http://discussions.apple.com/thread.jspa?messageID=6736587]
    Next, verify that your "Transmit Power: is set to 100%.
    *Interference Robustness / Use Wide Channels*
    Finally, ensure that "Interference Robustness" is checked (For certain network configurations this setting will say "Use Wide Channels. Verify that it is checked nonetheless.)
    Help Doc states: +"You may experience network performance problems if a microwave oven or other source of interference is used frequently near your base station or Time Capsule. To help minimize interference, turn on interference robustness."+
    Let us know if this was helpful.
    Cheers!

  • Why does iphoto want to chop off the left and right sides of the photo I'm trying to print?

    Trying to print a group photo.  Using the borderless setting, I still always lose half of the persons at the end of the rows.  Why won't iphoto allow me to print the entire picture?

    It actuallyhelps if you provide details including version of iPhoto and of the OS and what you are doing
    with absolutely nothing but a problem my guess is that the print size is a different ratio than the photos size so somehting has to be left off - for example you can not print an 8x10 photo on a 4x5 piect of paper - depending on the camera you have your photos are either in a 3:2 ratio or a 4:3 ratio - the paper must be the same - or you must crop the photos to the paper size - or you must go to the customize screen and right click on the preview and fit to frame
    onc eyou provide basic information more specific help can be provided
    LN

  • Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    Uh .... Yes you can. You just have to understand how the whole thing works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How do I make Organizer and Editor open at the same time?

    I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
    Thanks,
    K

    Create Desktop shortcuts for the Organizer and the Editor:
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Ken

  • I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

    i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

    Please post (a relevant section of) it right on this Forum.

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

Maybe you are looking for