Left and right fans running at different very different speeds on a 15" i5 Macbook Pro

I have a MacBook Pro i5 and it seems to be heating up a bit more than the first couple of months I had it. I also have istat which shows my left fan at around ~250 rpm's. The right fan is running at around ~2500 to 3500 rpm's. Is this normal or is this something I should take in to a genius bar to take a look at?
The temps of the CPU run from about 50 to 80. Any help or gudance is appreciated.

250 seems to me to indicate an issue - not sure if I have seen ANY computer fan purposely running at that speed - could be the fan or the sensor that monitors the fan is faulty. If high temps are being seen then faulty fan could lead to more serious issues.

Similar Messages

Remap Left and Right Command Keys as Different Buttons?

Hello,
I'm suffering from the dreaded emacs pinky (yes, I've already changed the caps-lock key to ctrl) and I want to know if it is possible to set the left and right command keys to different options.
For example, to keep the right command key as command, but have the left function as ctrl.
Thanks for any help.

I think the answer is the same as last year. Don't know of any way to do that.
Captfred

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

I need to run a different os x on my new macbook pro for pro tools 9hd

I have a newer macbook pro (no retena deplay) running Maverick but I need to be able to run snow leopard for pro tools 9hd
I have installed snow leopard on an extenal drive and it switches operating systems fine on my Imac (which is older) but does not work on my newer macbook pro.
Is this not possible?

more details here:
http://forums.macrumors.com/showthread.php?t=1365439

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels outputing different signals, to sound like the kit has been panned across the stereo field)?

I'm using GarageBand 10.0.1. Do the built-in drum tracks only come in mono format, or is it possible to make them true stereo (i.e. Left and Right channels putting out different signals, to sound like the kit has been panned across the stereo field)?

All the Drum Kits available for GarageBand are mixed in stereo.
Logic provides the same 18 Drum Kits also as "Producer Kits", which are multi-track outputs,. Each Drum Kit Piece (Kick, Snare, HH, etc) and also room mice and overheads are routed to individual channel strips.
Here is a screenshot of one Drum Kit in Logic Pro X with individual Channels Strips. Each Channel Strip can be loaded with individual effects (compressor) and adduced with individual sends, etc.
What that means is that all the Drummers are professionally recorded and sampled with individual mics. The Stereo Drums Kits are just "stereo mix-downs" for easier handling and less CPU demand. I explain all the details about the Drummer ecosystem in my graphically enhanced manual "GarageBand X - How it Works"
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Display resolution is different left and right sides

Hi, my HP G42 laptop now has a different display resolution on the left and right sides. The left half seems to have less resolution than the right side, the right side looks like it's in HD, the left side looks washed out. I'm not sure if it is a hardware issue or a setting/software issue. The first time it appeared was after a windows 7 update was completed and installed, I'm not sure if that was just a coincidence. Any suggestions would be greatly appreciated. It works but is very annoying to look at.
Thank you,
Ray

Hi Ray_M,
Welcome to the HP Forums! I see that you are having a problem with two different resolutions on each half of your screen. The easiest way to determine where the problem lies is to connect it to an external monitor. If the image is normal then we know it is an issue with the display screen but if the issue occurs on the external monitor then we know it is a problem with the drivers or the video card itself.
What is the product number for your g42? There are a number of different models in that series.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

Set up as facing pages with a larger inside margin.

FF 3.15 worked perfect with Snow Leopard. But everything after that, till FF 8, crashes left and right. On Facebook. And on ALL different language websites. Should I stop using FF? Heard Chrome is good.

[Edit: It should be FF 3.5. I mistyped FF 3.15]
I have MAC OSX Snow Leopard. 10.6.8.
FF 3.5 [apologies; I mistyped 3.15] worked perfect with Snow Leopard. NO problems.
But '''everything''' after that, till FF 8, crashes left and right.
Facebook crashes the most within few short seconds.
And NO different language websites even open.
I read online to use Safe Mode and try. I did. No change.
I read online to reset font cache or or something using atsUtil from the Terminal. I did. Nothing.
It is super frustrating. Same problem in my wife's Mac as well.
Should I stop using FF? I heard Chrome is good.
Try any of these news paper sites:
www.prothom-alo.com
www.dailyjanakantha.com
www.Facebook.com
Even ESPN videos quit randomly. But YouTube videos are fine!
Potheek Aami.

All your add-ons and plugins are up to date?
There has been a recent bug with Apples Java update:
https://bugzilla.mozilla.org/show_bug.cgi?id=700835
I have similar issues, although most of the time the browser only freezes for a short time.

I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
Detlef

You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording.

I get a blue line that runs left and right only on the games section, what is that?

I got a blue line that runs left and right & viceversa when I m on the games, can somebody help me? I don't know if that is a virus....I never got one so I don't know...

You do not have a virus. It sounds like you have turned on Switch Control, which can be turned back off in Settings > General > Accessibility. You probably have the Accessibility Shortcut feature turned on, causing a triple-click on the home button to activate or deactivate that feature. You can disable that shortcut in the same Accessibility settings.

How to send left and right of stereo sources to different targets?

Hi
Suppose I have an instrument track or audio track in stereo, and I want to send the left side of it to one bus and the right side to another bus, is there an easy way of doing this without creating two duplicate tracks (and panning one hard left and the other hard right)?
Similarly, suppose I have routed a track into a bus which contains an effect, a phaser for example, which is in stereo, and I want to put a delay on just the right and side but not on the other. Is there an easy way of doing this (without for example routing the output of the phaser bus to two separate busses and panning them hard left and right and then routing the right bus to another bus which contains the delay)?
Thanks if anybody has any suggestions, I'm playing around with this sort of stuff at the moment but its gettings too spaghetti. Am I being daft and the ability is there I just haven't found it in the manual?

Well, I did just what you´re asking about the other day. In order to process a stereomix with MS technique, I needed to send the left channel to bus 1, the right to bus 2. So I turned off Universal Track Mode. This enabled me to route the output to Bus 1-2 instead of Output 1-2.
I believe this should work for you, too. It´s a bit fiddly, and you mustn´t forget to turn Universal Track Mode back on if you continue with another project. Otherwise things might get very complicated indeed.
/j
Message was edited by: juhani h.

Filter -Different texts in left and right section in user help ( F4 )

Hi Friends,
When I try to filter values in Analyzer, different texts are shown in user help for selectable (left window section) and selected (right window section).
In leftsection texts are shown as defined eg, text short , but sfter selecting the value, on the right section text long is displayed.
Example:
If a characteristic Z_IO1 with key 1234,
text short T1
mid.text T123
text long T123456
Now I try to filter:
selectable value is shown as
1234 T1 (setting key and text short)
and after moving it to the right side with blue arrow it changes to
1234 T123456 (same settings) if text long doesn't exist text mid. is shown.
Did smomeone face this Issue or has any idea? Then let me know, please.
And something different is strange : When I try to restrict in BEx Query Designer, system works as expected,
display in left and right section of filter window don't differ.
Thanks in advance for your input.
Best Regards
Joe

Hi Venkat
Thanks for reply. My problem isn't filter value selection controlled by rea mode, it's just the display of the filter value texts (descriptions) in the F$ window for selected items. For me it seems, that it is not to change, default is set. I.e. the longest text available is displayed (according to property in RSD1) without any dependence on required texts (short, medium, ling), as mentioned in my example.
Regards
Joe

Left and right key press going to different markers

Hello there does anyone know exactly how to set the key press
of the left and right arrow keys on the key board so when i press
the left key it goes back a marker and when pressing the right key
it goes to the next marker. I am fairly new to lingo so any help
would be great and as simple as possible thanks

Hi,
I've created a slide show type application where arrow keys
as well as PageUp and
PageDown were used to move forward and back. Forward and Back
were not always
'previous' or 'next' markers. So, I created buttons on the
stage that acted as
forward and back, and each button had the regular mouseUp
event with the link to
the suitable location. I actually put the buttons off stage
and in a movie script
at:
on keyDown
case the keyCode of
121 : sendSprite (10, #mouseUp) -- pageUp
116 : sendSprite (11, #mouseUp) -- pageDown
end case
end
Using the 'sendSprite', when the user pressed a key, I could
activate the behavior
attached to the related navigation sprite. And, I could
easily add or remove key
controls by changing the movie script.
I have more info on using sendSprite, sendAllSprites and call
commands at::
http://www.deansdirectortutorials.com/Lingo/sendSprite.htm
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected]

The three finger swipe left and right does not seem to work

Hi
I have been trying to do the left and right three finger swipe that allows you to move between applications to no avail. It just keeps switching between dashboard and one app even if I have 5 apps open at the same time. Snow Leopard has this feature where all the apps opened are shown when you do the swipe and you can choose the one you want. I think this is better but it doesn't work.
Any help will be appreciated.
Antonio

Such spaces actually use very little extra memory relative to the apps you have open to occupy those spaces. I would go out on a limb and say it doesn't matter whether you have one space for every application or all on the same desktop.
The limitation will come from the applications and the data you are crunching on them.
(But that's just a personal view, haven't run into any limits on my ow 4GB Macbook Pro so far)

Left and Right Side buttons

I just got a replacement 8330 because I dropped my previous one in a muddy puddle. I cannot remember how I originally re-programmed the left and right side buttons to run different applications than the default (camera, and voice dial). Can someone help me out?
Solved!
Go to Solution.

Options > Screen/Keyboard > Left and Right Convenience keys.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Left and right fans running at different very different speeds on a 15" i5 Macbook Pro

Similar Messages

Maybe you are looking for