Left button of touchpad not working

left button of touchpad of my laptop G550 is not working, please help

hi jspanwar.
it is usually hardware issue that touchpad left/right button not working. if you have valid warranty, you can call lenovo support line for further informations.
but, before, can you check if the issue persists on safe mode?

Similar Messages

Synaptics Touchpad not working properly

Hi everyone,
I hope someone can help me with this problem. I have my laptop since more than 2 years and never had a problem with the touchpad. Since yesterday it's all messed up.
Touchpad is enabled and if set on right-handed and buttons and tapping enabled (the standard setting) it reacts as follows: I can continue to move the pointer, scroll and use the right button. I am not able to do tapping anymore and the left button doesn't react.
If I set it on left-handed, tapping starts working again and the right button (now having the function of the left button) works. Still, the left button doesn't react. If I disable the buttons the touchpad itself works properly (scroll, tapping etc).
I have googled and I have tried the following solutions: deinstalling / installing a new Synaptic / Windows driver (downgrading as well), than there was a suggestion to take out your battery and disconnect the power cable - did that as well, have tried enabling/disabling the touchpad - no change after that. I never have a mouse connected but I have now, tried disconnecting, made no difference. The day the error occured I had a Firefox upgrade - downgraded it again, no change. I used pressured air to clean the touchpad + buttons... no change...
I don't think this is a hardware problem because the tapping function, although always enabled, would only work with buttons disabled or with left-hand setting.
I really hope someone has a solution for this, it's driving me crazy!
My laptop is a HP Pavillion DV7 with Windows Vista 32-bit.
Many thanks in advance!
Cheers,
Steph

Is there no one who could help?

HP Pavilion g6-1c39ca touchpad not working

Hi, so i turned on my laptop today to find my touchpad not working, I did not change any of the settings. I am unable to enable the touchpad by tapping the cirlcle in the corner of the touchpad as it is broken. I tried to go to control panel-mouse-hardware and sound-mouse but there is no tab for device settings. After reading a couple of questions in the support forum I then downloaded the synaptic touchpad driver from hp support, but it could not be intalled correctly on my computer. Can someone please help me with this issue.

Hi @thomasand ,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your TouchPad/ClickPad has stopped working. The round button in the upper left corner of the TouchPad is non functional. You went to the control panel-mouse-hardware and sound-mouse but there is no tab for device settings.
You tried downloading the software and drivers but were unable to install them.
Here is a link to HP Notebook PCs - Using and Configuring the TouchPad (Windows 7 and Vista) that may help.
If you still have this difficulty please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Lenovo Z5070 Touchpad not working

Hello everyone,
I bought one lenovo z5070 20 day ago. But at the 3rd of the day touchpad was not working very well. I updated drivers, formatted laptop and tried again. Touchpad working cofusingly. When i touch at touchpad it is not working first after few seconds it is working. But when I'm use mouse and after using mouse ı try to use touchpad again. It is not working again and again.
What could i do for fixing this issue ?
Thanks..
Lenovo Z 5070 Model Name : 20354
Serial Number : 59-432087

Hi Salihyalcin,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with the touchpad not working in your Lenovo Z50-70 laptop.
Try to uninstall the driver and check for the issue, also try to boot the system to the safe mode and check for the issue.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

My Newly bought Blackberry Classic left side speaker is not working.... Help needed...!!!!!

Dear All,
Please kindly help me on this, I am from Pakistan and I got my Blackberry Classic delieved to me from USA my cousin bought it from online blackberry store and brought it by hand. Just now i have noticed that my blackberry classic left side speaker is not working only ringing sound music sound and loudspeaker sounds are coming from the right side of the speaker.
Has anyone faced this problem with his new classic and what should i do?
Please help or guide me
Solved!
Go to Solution.

Knowing this that classic comes up with only one speaker did broke my heart But to be honest the sound is excellent even at high volume the sound does not distort. its a genuien stereo speaker

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Cheryl...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
Restart your Mac. Launch Safari. Try the back button.
~ (Tilde) character represents the Home folder.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Disabling Radio Button Conditionally is not working Well

Hi friends,
I have three radio buttons
<li>self
<li>New Hire
<li>On Behalf of
I will be showing this radio button conditionally according to the user who logs into the application.
Assume, suppose if a person 'A' enters into the application means he will be shown only these radio button options ---NH---,----OB----,----Self-----
Suppose, if a person 'B' enters into the application means he will be shown only these radio button options ----NH----,----Self---
If a person 'C' enters into the application means he will be shown only these radio button options ---Self---
I have restricted those radio buttons according to the users who enter into the application using their roles.
But my challenge here is once the user logged in and if he select anyone of the radio button means,
Example if he selects----NH---means, then ---OB----and -----Self---radio button has to disable and if he selects ---OB----means then ----NH-----and ---Self---has to
disable(vice versa).
I have also achieved the same using the DA.
With true action as: javascript Expression i have given the following codings( i have written the below DA for three cases, if the request_class_code is equal to
(NH,OB,S)
var enabled=$v('P22_REQUEST_CLASS_CODE');
if (!$u_SubString(enabled,'S')) $('#P22_REQUEST_CLASS_CODE_2').attr("disabled","disabled");
if (!$u_SubString(enabled,'NH')) $('#P22_REQUEST_CLASS_CODE_0').attr("disabled","disabled");
if (!$u_SubString(enabled,'OB')) $('#P22_REQUEST_CLASS_CODE_1').attr("disabled","disabled"); The above DA is working great only for the user who has the option of viewing three radio buttons in my form(i.e)(NH,OB,S).
For the user who has the option of viewing two or one radio button, it is not working properly(i.e)(NH,S) or(OB,S) or(S).
Why it is not working for the user with two options or with one option radio button means, the source of that radio button property is changing. Since i have taken
the source of my radio button in my DA only when the three options are present.
How i can solve this issue for the user who is having this two radio option or one radio option.
Hope you understood clearly about the problem.
Brgds,
Mini

Hi,
If I did understand what you like have this might work
var lVal = $v('P22_REQUEST_CLASS_CODE');
$('#P22_REQUEST_CLASS_CODE input:not([value="' + lVal + '"])').attr("disabled","disabled");Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME

Satellite M70: Control button keys are not working

I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
Emm

Hey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

Touchpad not working indecate yellow light

touchpad not working indecate yellow light

I think it is telling you that you need a firmware update. Happend to me

I am about to buy and iphone 4, its second hand and is in amazing condition. The only problem is that the 'wi-fi' button doesn't not work. I tried to click on it but nothing responds. Can this be fixed? Should i still purchase it?

I am about to buy and iphone 4, its second hand and is in amazing condition. The only problem is that the 'wi-fi' button doesn't not work. I tried to click on it but nothing responds. Can this be fixed? Should i still purchase it?

while you are with the person selling it to you, ask if you can do a complete restore of the software settings->general->reset->reset all
reboot the phone to factory settings and see if that fixes the problem. if not, i wouldn't buy it unless they are selling it to you for less than $50. wifi is crucial for keeping data low and using features like facetime

Left button of touchpad not working

Similar Messages

Maybe you are looking for