Left button, trackpoint and touchpad

My left button, both on the trackpoint and touchpad does not respond.
I've been forced to use a USB wired mouse to get the left click to work.
I did try an MS wireless mouse in the USB port, that doesn't work either.
When the well is dry, we'll all know the value of water.

I find it difficult to believe not one reply, nada, zip, nothing.
I would expect at least one reply to my question from Lenovo.
Difficult working without the left tracking button not working and the left touchpad button not working button. Neither of which works.
Do I need factory service or what?
When the well is dry, we'll all know the value of water.

Similar Messages

  • X301 Windows 7 Trackpoint and Touchpad

    I just upgraded my X301 to windows 7 and there doesn't seem to be a way to turn off the touch-pad. So, when I comfortably use my keyboard and trackpoint, I am constantly selecting things.
    The XP control panel interface had both separate sensitivity controls and the ability to turn the touchpad completely off. This doesn't exist in the Win7 ctrl panel and I can only find one driver suite for windows 7 on Lenovo's site.
    Any ideas?
    Solved!
    Go to Solution.

    Which led me to realize that I didn't have the ultra-nav driver installed. This is kind of embarassing, but I'll leave it up in case anyone else has the same boneheaded moment I did.

  • Touchpad Left Button on s12 broken?

    Hi all,
    I have just switched on a brand new s12 and discovered that the left button of the touchpad is disabled or broken. I had look for a new driver but the s12 is not on the list for new drivers. I am stuck and moved from happy when I opened the package to frustrated... Is there anyway to check if it is broken or just a configuration problem?
    Thanks

    http://consumersupport.lenovo.com/uk/en/driversdow​nloads/drivers_show_2216.html
    http://consumersupport.lenovo.com/uk/en/driversdow​nloads/drivers_show_1331.html

  • Help on T61 ABOUT track point and touchpad!

    Anyone encountered this problem!
    I use the os UBUNTU on my T61 lenovo for  almost 1year and its work with
    the mouse meaning no problem!
    Now I just reformat it into windows XP now the trackpoint and touchpad left button wont work but the right button
    working! I already use my original recovery and it not working to!
    But when I disable my touchpad button and enable the trackpoint it work
    the track point work only if o disable the touchpad!
    Even the touchpad wont work in double click only the right click is working
    but when I use UBUNTU software both mouse are working!
    I already reset the cmos!
    Anyone can't answer this pls help!
    Thank you

    I already boot in dos mode and even in thinkpad recovery explorer the mouse left buttons wont work
    meaning if I use Microsoft software the mouse left buttons wont work
    but in UBUNTU or LINUX  both mouse working well
    HELp plus

  • Snap noise from trackpoint left button

    hello,  I was wondering if anyone know how to fix this little (annoying) problem I have with the T61.
    Basically, I use the trackpoint more than the touchpad and therefore I use the two trackpoint buttons right below the space bar.
    My problem is, the left trackpoint button makes this *click* sound every time I press on it.  The right button is perfect and is extremely quiet, but the left button sounds like plastic is snapping every time I press on it.  its almost like the button is caught against something and makes the click/snap noise when you press on it.
    any suggestions? its really annoying to have such a quiet keyboard and laptop, only to have it ruined by this loud snap/click.
    thanks!

    Hello,
    Have you checked with Lenovo support?  Perhaps the keyboard is defective and needs to be replaced.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • ThinkPad S230u Trackpoint mouse and touchpad problems.

    My Tackpoint keeps pulling mouse random directions slowly random times... (Same bug that my older X61 Thinkpad)
    Can that be caused by static charge or something??
    And Touchpad... How i can turn it off??
    Is that button really missing??
    I mean "Disable Touchpad" button with FN shortcut

    Hi Finlander,
    Welcome to Lenovo Community Forums!
    I’m really sorry to hear that you are having trouble with Touchpad and TrackPoint in your Lenovo S230u.
    I would recommend you to update the Ultranav Driver to the latest version and check.
    In order to disable the touchpad, go to Control Panel -> Mouse -> Ultrnav -> Uncheck Enable Touchpad checkbox ->OK.
    Spoiler (Highlight to read)
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo Thinkpad T420 trackpad and touchpad right/left click stopped working

    So I have had a very... VERY... irritating problem with my Thinkpad.
    For the first 6 or so months I had the laptop it worked fine. Then, the left click on the touchpad was functioning like the right click (bringing up a menu). 
    I immediately disabled the touchpad and then used the trackpad right and left clicks which worked perfectly.
    After another 4 or 5 months, those buttons stopped working altogether. I could still use the touchpad to move the arrow, but I couldn't click on anything.
    I bought an external USB mouse and that worked fine for another 2 months. Then for a few weeks, it would work on and off. I'd have to wiggle it around in the USB ports to get the laptop to recognize it. (it had nothing to do with the ports... there were 3 of them and they all worked fine).
    Then it stopped working completely, AND, my laptop refuses to acknowledge ANY USB I plug in. 
    I have run out of options now. I can't even install anything, download any files from lenovo website. I can't do anything. Does anyone know if it is still salvageable? Has anyone had the same problem?
    The lenovo digitizer for tablets.... would that work for this thinkpad? (sorry... not as tech savvy as the rest of you)
    Thanks a bunch,
    Amanda

    Here was my solution to this. My left click button on both the trackpad and touch pad suddenly stopped working on me. After putting up with this for a few weeks I decided to investigate. I found if I disabled the touch pad the trackpad left click would start to work again. So I investigated by carefully popping off the left click button for touchpad. Everything looked normal, so I investigated a little father buy removing the small round blueish rubber piece in the middle of the button. Once I did this I realized it quite dirty, with a soft cloth and a toothpick I cleaned both the contacts on the PC and the the black spot on the rubber piece, putting everything back together and my left click worked once again. 
    The cause of my problem was just a build up of dirt under the rubber contact which caused the button to short out and disable itself. 
    I didn't have to reinstall any software or drivers. 

  • Satellite C50-A-157 - Unable to use touchpad without holding left button

    I know very little about my Satellite C50-A-157 . Run on Windows 8. I am main /admin user and all of a sudden I am unable to move the mouse/cursor.. only way it seems to let me, is if I hold the left hand botton (bottom of mouse pad) down at same time, then it moves around.
    But then high-lights everything.
    I have tried pressing FN+F5 at same time (nothing happens) even taken battery out of back (again does not solve issue) the MOuse/arrow is just frozen on the page.. this does not happen in my partners profile, (he is another user) the mouse seems to work fine..
    I thought it was that the mouse pad, had worn out (as is shiny now) but this does not explain why it only happens under my profile/user, not his?
    If anyone can offer any help, much appreciated... I only stumbled across the fact, it lets me use it (if I hold in left button at same time)
    Also have tried the 'Sticky keys' shift x5, again this does not do anything or clear this problem.
    And have gone into control panel usinw Windows+ X and gone into troubleshooting, again, not solved the problem.

    .. this does not happen in my partners profile, (he is another user) the mouse seems to work fine..
    Since the touchpad is still working using another user profile, I guess there must be only some software conflict.
    Usually you can enable or disable the touchpad pressing F5 (or FN+F5) but you already tried this combination and this did not enable the touchpad…
    So from my point of few you should simple uninstall the touchpad driver and after you have downloaded the newest touchpad driver package from Toshiba EU driver page, unzip the package and perform new touchpad driver installation…
    After the installation has been finished, restart the notebook…
    Good luck

  • S10 - Left click button below the touchpad is non-respon​sive....an​yone else?

    My left click button appears to no longer be responsive.  I've checked the buttons settings and it is set as primary, normal drag, etc......
    It doesn't appear to be a problem with the button(hardware) as I still get a strong click action, just doesn't appear to process the click logically.
    I searched the board and didn't find anything specific to this.
    I've uninstalled/reinstalled the Synaptics touchpad driver but still nothing on the left click.......
    Thanks.
    Geoff

    USB mouse works just fine.........left-click button, non-responsive........guess I'll open it up and check out the contact points.......

  • Satellite P500 - Eco, speaker and touchpad on/off button don't work

    Hello,
    I love my new Satellite P500. Great Laptop!
    But I have a little problem with the eco button, speaker button an the touchpad on/off button. They dont work! 2 days ago I refreshed my Windows 7 after the same problem. Today I have the problem again.
    I searched for a option where I can support this buttons, but no result.
    Is it possible to reinstall it?
    I installed the eco software again, but it wont work with the button on the left side. Same with the touchpad on/off button.
    Any Idea?
    Thanks
    Alexander

    Hi
    Nice to read that you are love your new Satellite P500. My friend has also bought new Satellite P500 and he is very satisfied too. Its a great notebook with fast and new hardware equipped. The design is fantastic I have to say.
    Anyway, you can reinstall the Eco Utility and Toshiba Value Added Package that controls such special functions. Both utilites you can get on the Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Good luck! :)

  • Satellite C series Touchpad scrolls/moves when the left button is depressed

    Hi,
    Seem to be having a problem with my touchpad.
    After about 2 weeks of normal operation, it now only scrolls/moves when the left button is depressed.
    Have had a look in settings but cannot seem to get anywhere.
    Any ides?
    Thanks,
    K

    It is not easy to say what is wrong there. Maybe such behaviour is result of defective hardware.
    I recommend you to reinstall operating system using HDD recovery option and check functionality again with factory settings. If the same will happen again from the first moment it must be hardware malfunction and in such case you should contact nearest Toshiba service provider.
    They can check it, repair if necessary and all costs will be covered by warranty.

  • In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    The application auto-saves your input when you close the document.  If you left the document, as you state, the notes/comments should have been saved and should have been visible the next time you opened the document with the Mobile Reader (note that if you are opening the document with another app such as Apple's built in PDF Viewer, things like notes/comments may not be visible).  Also note that if you are doing an Open In... from another app (like Dropbox), the version of the document in Dropbox does not update; only the version of the document in the Mobile Reader is updated.
    Would it be possible to send a video of the problem you are encountering to [email protected] so that we can try to help?

  • While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening

    While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening this week. All other websites are ok.

    You're welcome

  • Left button of touchpad not working

    left button of touchpad of my laptop G550 is not working, please help

    hi jspanwar.
    it is usually hardware issue that touchpad left/right button not working. if you have valid warranty, you can call lenovo support line for further informations.
    but, before, can you check if the issue persists on safe mode?

  • Magic Mouse and MS Word 2011 (under OS 10.7, iMac middle 2011): Marking of word in a document stops after a few seconds while still pressing the left button and keep on moving the mouse (batteries full)

    Software: OS X Lion (10.7.4); Microsoft Word für Mac 2011, Version 14.2.2 (120421)
    Hardware: iMac 2.7 GHz Intel Core i5, 12 GB, magic mouse
    To mark several clauses in a doc-document (in MS Word 2011), I press the left mouse button and move the mouse along the words
    My problem:
    While still pressing the left button and moving the mouse, the marking on the screen stops and I can't change the already existing markings any more (to become less or especially more).
    Who knows:
    - why this happens and how I can abondon this behaviour?
    - is it a settings problem in MS Word 2011 or of OS X Lion?
    By the way:
    - I don't watch this behaviour in MS Excel 2011. There everything works fine.
    - The batteries are fully loaded and I'm about 30 to 40 cm (1") away from the iMac (RSSI: -60 dB)
    Thanks for answers.
    redlef

    I have the same problem now that I've enabled FileVault 2 on Mountain Lion.

Maybe you are looking for

  • Ibus and KDE/Kimpanel

    Hi, I am using KDE and recently changed my input method from scim to ibus. Is there a way to use ibus through kimpanel (KDE input method plasma widget)? Thanks, Eric

  • Logoff redirect not working

    Hi, we need to redirect users after the logoff to a diffferent page. I found Note 696294 and added the following values: ume.logoff.redirect.url=http://www.google.com ume.logoff.redirect.silent=false After a restart i logged in and logged of. as a re

  • Position layer in the centre of document

    I'm trying to copy a document from one open document to another which I have achieved, but how can I position it in the centre of the new document? This is what I am using at the moment, tell application id "com.adobe.photoshop"   set textName to nam

  • UM WHAT?

    hey all, another question for you. i was using my dads laptop last night and it was fine but i had to leave the room and when i came back it was shutting down. when i try to restart it , the power lights come on and the fans but the monitor doesn't t

  • Job Control Clover components

    Hi, I was looking through the documentation on Clover's site and noticed there were quite a few components that are not included with OEID 2.3, in particular the Job Control components. According to the documentation, +"To be able to use this compone