Left cmd x not working

Since this morning I can't 'cut' in an applications using left cmd+x it works ok with right cmd+x but this is rather a annoying to press.
If I use the keyboard viewer I can see that the press of the x is not registered when I hold down the left cmd key, but is regsitered when holding down the right cmd key.

Please do a SMC Reset at least 2-3 times, then resart normally and retest.
Intel iMac SMC and PRAM resets

Similar Messages

  • My left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    my left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    I recommend you to run Apple Hardware Test > http://support.apple.com/kb/ht1509 It's possible that something is damaged, and Apple Hardware Test will help you finding it. Make sure you tick the option to run an extended test, and connect your Mac to the charger.
    If your Mac came with DVDs, you have to insert the Mac OS X DVD to run Apple Hardware Test. As you haven't got the SuperDrive, you will have to buy an external optical drive

  • Left Outer Join Not working in BI 7.0 Infoset

    Hi All,
    I am working on BI 7.0. I have to create a report where I have to display the Target values from a target DSO against the transactional data (Operational data).
    I have a DSO where for a “subteam” value target has been set up on different KPIs.
    In the Info Cube, I have transactional data on daily basis per “subteam”. I have to show the actual and target values.
    I have created an Info Set using Target DSO and Daily operational cube, so that I should able to compare the target and actual values of KPIs, for all the “subteam” values (From DSO, irrespective of whether the data is available in cube for those sub team).
    I have used Outer Left Join in the Info set (DSO on left side), but I am unable to see the desired results. It is working just like an inner join.
    Any Idea why the Outer Left Join is not working? The DSO has only one fey field called “subteam” on which I have set outer left join.
    Regards,
    Amit

    Hi,
    did you solve your problem? because I have the same issue right now: the left outer join doesn't seem to do its job.
    Let me know if you have found a solution, it would be appreciated.
    have a nice day,
    Dominic

  • I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

    I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

    I bet this is too late but...
    Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

  • TS1381 My left arrow does not work on my macbook pro(model A1226).  I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work)  - HELP!!

    My left arrow does not work on my macbook pro(model A1226).
    I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow). 
    In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work. 
    I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
    Here is the kicker!  In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
    I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
    Can anyone think of any other rabbit holes I can search?
    thanks and regards
    vats3

    I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

  • I buy my Headphones on Apple Store, and the left sight is not working that much.II want to know if i can replace to a new one.

    I buy my Headphones on Apple Store and it cost me about $36 with Tax, and the left sight is not working that much.I want to know if i can replace to a new one without no charge.

    If they are Apple-brand headphones, then the Apple Store will handle the warrranty and, absent any evidence of abuse, should replace the headphones. If the headphones were made by some other company, then unless you purchased the headphones in the last fourteen days, you will have to contact the manufacturer of the headphones for warranty support.
    Regards.

  • Left shift key not working

    left shift key not working.

    thanks, i thought there some quick procedure to do before heading to apple store. i was just wondering, it was working for a while, and then suddenly like that. i have macbook 10.6.8 software. intel core 2 duo. less than a year old, if i'm not mistaken.

  • I have iPhone 4. and my left speaker is not working. Now what i do.. Plz help

    I have iPhone 4. and my left speaker is not working. Now what i do.. Plz help

    The speaker is only on the right. The holes on the left are for the mic.

  • Command-Left/Right Arrow not working

    Very strange behavior I'm seeing today.
    My left/right arrow keys work. Even Option-Left/Right works correctly.
    But, Command-Left-Right do not work. No movement at all.
    Curiously, Shift-Command-Left/Right work fine.
    I've not changed any keyboard shortcuts recently. I've checked the keyboard shortcuts that are currently defined. Nothing that would indicate a problem, but clearly there is.

    Just found a solution that worked for me here. Basically, it seems to be a bug with the Dock. If you type "killall Dock" (the command is case-sensitive) into the command line in Terminal, it restarts the Dock. After that the arrows seem to work normally again.

  • HP Pavilion notebook left shift key not working

    My reasonably new HP Pavilion has a problem with the left shift key not working.  The Right shift is fine, as is the Caps Lock.
    Windows version is 8.1 64 bit
    Can you advise me on whether this is a driver issue or a hardware issue, in which case I will return to the supplier
    Thanks, Helen

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you
    It looks like you are having issues with the Keyboard on your Notebook
    We will surely assist you with this
    Let’s start with a questions.
    1. Was there any liquid split on the Notebook Keyboard
    2. Is there any Dust settled on the Notebook Keyboard
    3. Are there any Keys which are fallen off / Any Keys which are loose
    Troubleshooting: 
    Step 01. Could you please check and verify if External Keyboard works fine or not?
    Note: Please click on the below shown link to find more troubleshooting steps
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Laptop left Speaker audio not working

    Sir,
    I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
    Kindly do the needful

    Hey @KKVK ,
    Welcome to the HP Forums!
    I understand your left speaker is not working on your dv5 notebook.
    If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
    You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
    If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Left mouse controls not working... very strange

    I don't believe this is unique to R40 so any help would be appreciated 
    I have just installed new hard drive and now the left track point and ultranav left mouse does not work. If I go to
    mouse>ultranav> settings> buttons> left click  and select jump to start it works until standby power off or logon screen. So
    again it works until any of the above and then I need a usb mouse to re enable the left mouse control. I do not believe it is a
    hardware issue as all 3 left click methods will work until standby etc. i have re-installed latest drivers and am now considering a
    reinstall of Windows XP.
    Any suggestions???
    R40 2723

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • T-430 Snap desktop windows to the left or right, not work ?

    Hello,
    with my new T-430 with Windows 8.1 i have following issue. Snap desktop windows to the left or right, not work.
    Windows Key and left or right arrow do nothing. I have all the latest drivers and also Windows 8.1 updates installed. Anybody has a idea would could that be ?
    Thanks
    Rainer from Munich/Germany

    Swiping left to right or right to left should work if you're in the right place.
    For example, try it in Music > Songs (button in lower right).

  • My laptop touchpad left mouse key not working

    I have a Elitebook 8440p with windows 7 professional.The touchpad left mouse key not working ,but right mouse key works well.my driver is  synaptics 14.0.10 090ct09 and the touchpad name is synapticsTouchPadV7.2.
    thanks in advance.
    wy

    i had the same problem. what solved this for me was to simply go to device manager and under mice and other pointing devices uninstall the touchpad, i had a usb mouse handy just in case i needed it, but then i restarted the laptop and it auto reinstalled touchpad for me and then all options worked on startup.

  • CMD+ shortcuts not working in Dreamweaver CS3

    I'm have a very strange issue with CMD+ keyboard shortcuts
    not working in Dreamweaver CS3 on OSX 10.5. These actions are
    working from the menus (i.e., copy, cut, paste, etc.). CMD+
    shortcuts work in other CS3 apps. I've searched this forum and
    googled up and down and found some references to issues like this
    with Dreamweaver 8, but nothing for CS3.
    Has anyone experienced this problem? I'm completely stumped.
    Lawrence

    My concern wasn't with the navbar, but thanks for the headsup.
    The problem is that the link in the upper left hand corner, Suzie's Story, is a rollover image but it does not reveal the other image when the cursor goes over it.
                            <div id="topTabs1">
       <div align="center"><a href="http://www.google.com" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('suzie','','Images/Suzie's Story Tab_light.jpg',1)"><img src="Images/Suzie's Story Tab_black.jpg" alt="suzie" name="suzie" width="75" height="45" border="0" id="suzie" /></a></div>
             </div>
    #topTabs1 {
    width: 75px;
    height: 45px;
    float: left;
    background-color: #ffffff;
    padding-left: 0px;
    padding-right: 0px

Maybe you are looking for

  • Hi I can't sync my ipod with new version of itunes after losing old pc

    Hi my old pc crashed and burned taking with it my entire itunes library.  thought i'd backed up onto external hard drive but can't find anything.  Atleast i still have a full ipod.  However i've downloaded itunes onto my new laptop and when i try to

  • Cannot attach PL/SQL library APPCORE... forms6i

    Hello, I am trying to open the template.fmb form and I cannot seem to get forms to recognize the FORMS60_PATH variable in the registry. I transferred (in binary) all the .pll files from $AU_TOP/resource to a local directory ORACLE_HOME\FORMS60\resour

  • Underline and Code Insight Problem in JDev 10.1.2.0.0 (1811)

    I have just included the libraries to be able to use the MyFaces compnents in jdeveloper and everithing seemed to be working fine, until I imported a package in my case import org.apache.myfaces.custom.date.HtmlInputDate; The Jdev editor is underlini

  • Ipod Touch Wiped out

    My son allowed a neighbor kid to attempt to update his ipod touch.  Instead, she wiped out everything!  Is there anyway to get it back the way it used to be?  All apps, and games he had are gone.  BTW it is a 16 GB 4th gen.

  • BE3000 external management with an API

    Hi to all, I am looking for an API which can help me to get these informations from BE3000's database. Also if it is possible I want to add, delete and edit user and phone infromations with an external API. Is it possible? And if it is, what is the r