Left Headphone not working, Right works fine. (4th Gen Nano)
Hi there. I have a 4th Gen Nano. The right headphone plays, the left does not. I have tried other headphones in this device, but it still doesn't play, I have tried all the headphones in other i-pods and they work fine, so it is not the headphones. Do I have a setting messed up somewhere? I have also reset the ipod twice now. Thanks.
You have a defective headphone jack, either send it in for service or make a Genius Bar appointment at your nearest Apple Store.
Similar Messages
-
i have phisical damage to the itouch (2 small dents in the back metal part) the left headphone is not working properly, i have tryed serveral differnt headphones so its deffintly the actuall ipod. I still have it coverd with apple care but i dont know if they will replace it because there is phisical damage.
If sound like your earphone jack needs to be replaced or adjusted.
-
Internet showing up but not working iTouch 4th Gen
Help my Internet connection Is showing up but not working. it happens when the Internet goes off the router then resets it self which it for everything except my iPod :( Please help we've reset it again :( but no luck
Please help does anyone know what to do?
-
IPod Randomly Reset Itself, Now Apps Are Not Working!(4th gen)
So, I was just browsing websites in Safari when this happened. I'm pretty sure I got linked to Tumblr and then my iPod decided to reset itself. After that, many apps refused to work, including Safari. Puffin Web Browser still worked, but it said that I was located in the United Arab Emirates, when I'm in the United States. Many YouTube videos refuse to work now also. I honestly have no idea what happened, and any help would be much appreciated.
Thanks!
NoahSoftware glitches happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,
Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound. -
Left Speaker NOt Working.
Hi Team ,
HP Pavilion g6-1312TU NB Left Side Not Working .Read over this document and it will walk you through the steps to test the speakers: No Sound from the Speakers (Windows 7) This will show you how to test the left and right speaker to make sure it is not faded. If it is not faded you will need to contact HP Support.
You can contact technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
IPad3 Speaker isn't working but the headphone is working fine.
iPad3 Speaker isn't working but the headphone is working fine. I have resetted the all settings and restore to old backup also but it doesn't work.
Let me know the steps to resolve the issue!Check System Preferences > Network > active connection > Proxies tab. Are there proxy servers enabled? If you aren't behind a proxy server (which you probably aren't), uncheck those boxes. (Firefox bypasses the OS's proxy settings, so it's not affected by those settings.)
Hope this helps... -
Bose Mie2i headphones not working
Hi - I have an iPhone 4s and a pair of Bose mie2i headphones. All has been good today until i plugged in the headphones, played a song and the sound came through the phones speakers rather than the headphones. Have tried plugging and unplugging the headphones, switching the phone on and off and even doing a settings reset - no joy. The only way of getting the sound to come through the headphones is to hit play on the song and then quickly push the in line mic on the headphones.
Any ideas?
BillyI don't know about that particular product personally, but the Apple EarPod headphones work with 4th gen shuffle, but not the 3rd gen shuffle.
I Googled "Bose MIE2I manual" and found the PDF
http://worldwide.bose.com/library/assets/pdf/guides/headphones/mie2i_headset/en/ owg_en_mie2i_headset.pdf
It says the 3rd gen shuffle IS compatible. But the compatible list looks somewhat dated... -
Assalam u Alaikum, Everyone!
Actrually i upgraded The Window 8.1 to 10, Before windows 10 my headphones were working fine but when i started to use windows 10 , it is not working. jack is fine because it shows headphone detected in playback devices,even i select as default device despite of that headphones are not giving sound while speakers are fine.
If any solution is in your mind please to tell ,Thanks in advance@b4noy
Perhaps try re-installing existing device software using Nokia Suite if this option available.
Happy to have helped forum with a Support Ratio = 42.5 -
Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.
http://support.apple.com/kb/TS1363
-
5233 cell not working fine after new theme install...
My 5233 cell is not working fine after new theme installation.
As soon as i installed new theme MENU options are not coming, Only showing new theme image.
Pls help.Be careful when you install themes or apps. Make sure their sources are reliable and the app works properly on your phone model.
If you want to thank someone, just click on the blue star at the bottom of their post -
Smartform : line type not working fine when used on Next page
Hi ,
Please help on below :
I have a smartform and have line type which is used in printing the items.
When I use this line type on very first page , it works fine.
But for the next page which is the exact copy of first page ,
the line type does not work fine with printing first line item on next page,
it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
But on the next iteration it works fine and does not refresh work area.
Please see why is such abnormal behavior happening.
Regards,
Uma DaveHi Ameya
there might be syntax error. Try to get what exaclty is an error using following code.
CALL FUNCTION <smartform>
EXCEPTIONS
IF SY-SUBRC 0.
CALL FUNCTION 'SSF_READ_ERRORS'
IMPORTING
ERRORTAB = IT_ERRORLIST.
ENDIF.
In IT_ERRORLIST you will get error message.
Regards
Sachin G Patil -
Hi
db version is 9.2.0.8.0
in dev the query is working fine.But in qa the query is not working fine(hanging).I had checked the explain plans.
Both are different.This is due to difference in volume of data.
I am pasting the explain plans of both the queries in qa and dev
qa explain plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 606M| 118G| | 107M (1)|
| 1 | SORT GROUP BY | | 606M| 118G| 524G| 107M (1)|
| 2 | HASH JOIN | | 1869M| 363G| | 50748 (1)|
| 3 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 9066 | 318K| | 331 (1)|
| 4 | HASH JOIN | | 2474K| 408M| 2232K| 50400 (1)|
| 5 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 54396 | 1593K| | 330 (1)|
| 6 | HASH JOIN | | 2474K| 337M| | 31791 (1)|
| 7 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 206 | 3296 | | 25 (4)|
| 8 | HASH JOIN | | 3162K| 382M| | 31745 (1)|
| 9 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 3087 | 27783 | | 25 (4)|
| 10 | HASH JOIN | | 3162K| 355M| 2952K| 31699 (1)|
| 11 | MERGE JOIN CARTESIAN | | 62930 | 2212K| | 14627 (1)|
| 12 | INDEX FAST FULL SCAN | SYS_C0013071 | 2923 | | | 4 (25)|
| 13 | BUFFER SORT | | 22 | 792 | | 14623 (1)|
| 14 | TABLE ACCESS BY INDEX ROWID| CURCY_CONVERT_RATE | 22 | 792 | | 6 (17)|
| 15 | INDEX RANGE SCAN | XPKCURRATE | 22 | | | 5 (20)|
| 16 | TABLE ACCESS FULL | SHIPPABLE_BACKLOG_FACT | 321K| 25M| | 15494 (1)|
dev explain plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 17M| 2978M| | 927K (1)|
| 1 | SORT GROUP BY | | 17M| 2978M| 6504M| 927K (1)|
|* 2 | HASH JOIN | | 17M| 2978M| | 2726 (1)|
|* 3 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 4992 | 180K| | 416 (1)|
|* 4 | HASH JOIN | | 41051 | 5852K| 2872K| 2309 (1)|
| 5 | TABLE ACCESS FULL | DIM_GEOGRAPHY_HIER | 69888 | 2047K| | 415 (1)|
|* 6 | HASH JOIN | | 41051 | 4650K| | 1504 (1)|
|* 7 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 206 | 3296 | | 37 (3)|
|* 8 | HASH JOIN | | 52460 | 5123K| | 1467 (1)|
| 9 | TABLE ACCESS FULL | DIM_PRODUCT_HIER | 3087 | 27783 | | 37 (3)|
|* 10 | HASH JOIN | | 52460 | 4661K| | 1430 (1)|
|* 11 | TABLE ACCESS FULL | SHIPPABLE_BACKLOG_FACT | 7718 | 414K| | 513 (1)|
| 12 | MERGE JOIN CARTESIAN | | 48941 | 1720K| | 915 (0)|
| 13 | INDEX FULL SCAN | SYS_C0060330 | 1827 | | | 7 (15)|
| 14 | BUFFER SORT | | 27 | 972 | | 913 (0)|
| 15 | TABLE ACCESS BY INDEX ROWID| CURCY_CONVERT_RATE | 27 | 972 | | 2 (50)|
|* 16 | INDEX RANGE SCAN | XPKCURRATE | 27 | | | 4 (25)|
Here is the query
SELECT 'BACKLOG' AS SUBJECT_AREA, 'CURRENT' AS TIME_RANGE
,GEO_ROLLUP.GEOGRAPHY_HIER_KEY
,PRODUCT_ROLLUP.PRODUCT_HIER_KEY
, backlog_FACT.DISTRIBUTION_CH_ID
, backlog_FACT.SALES_DISTRICT_ID
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0) - NVL(backlog_FACT.GC_biilled_AMT,0)) AS billing_backlog_AMT
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0)- NVL(backlog_FACT.GC_DELIVERED_AMT,0)) AS delivery_backlog_AMT
, SUM(NVL(backlog_FACT.GC_SCHEDULED_AMT,0) - NVL(backlog_FACT.GC_REV_REC_AMT,0)) AS rev_rec_backlog_AMT
, CURCY.VALID_FROM
FROM fact.shippable_backlog_FACT backlog_FACT
, DIM.DIM_PRODUCT_HIER PRODUCT
, DIM.DIM_GEOGRAPHY_HIER GEO
, DIM.DIM_DATE DT
, DIM.DIM_PRODUCT_HIER PRODUCT_ROLLUP
, DIM.DIM_GEOGRAPHY_HIER GEO_ROLLUP
, DIM.CURCY_CONVERT_RATE CURCY
WHERE
PRODUCT.PRODUCT_HIER_KEY = backlog_FACT.GEF_PRODUCT_HIER_KEY
AND GEO.GEOGRAPHY_HIER_KEY = backlog_FACT.GEF_SHIP_TO_GEO_HIER_KEY
AND ( backlog_FACT.DELIVERY_COMPLETE_DATE IS NULL
OR backlog_FACT.BILLING_COMPLETE_DATE IS NULL
OR backlog_FACT.REV_REC_COMPLETE_DATE IS NULL
AND PRODUCT.PRODUCT_TYPE = PRODUCT_ROLLUP.PRODUCT_TYPE
AND PRODUCT_ROLLUP.HIER_LEVEL_NUM = 4
AND PRODUCT_ROLLUP.CURRENT_RECORD_IND = 'Y'
AND GEO_ROLLUP.SUB_POLE = GEO.SUB_POLE
AND GEO_ROLLUP.HIER_LEVEL_NUM = 3
AND GEO_ROLLUP.CURRENT_RECORD_IND = 'Y'
AND CURCY.VALID_FROM <= BACKLOG_FACT.ORDER_LINE_CREATE_DATE
AND CURCY.VALID_TO > BACKLOG_FACT.ORDER_LINE_CREATE_DATE
AND CURCY.EXCHANGE_TYPE_ID = 'M'
AND CURCY.TO_CURRENCY_ID = 'USD'
AND CURCY.FROM_CURRENCY_ID = BACKLOG_FACT.DOCUMENT_CURRENCY_ID
GROUP BY
PRODUCT_ROLLUP.PRODUCT_HIER_KEY,
GEO_ROLLUP.GEOGRAPHY_HIER_KEY,
backlog_FACT.DISTRIBUTION_CH_ID,
backlog_FACT.SALES_DISTRICT_ID,
CURCY.VALID_FROM;
I analyzed all the tables involved in it.
can anybody give me suggestion in crating indexes or anything else?
Thanks
VeerVeer,
Modify your post and enclose your code and output between \ tags for formatting
\Your code or output goes here
\Now, are table stats are upto date on all the table on QA machine? If not, analyze your table and indexes and re-run your query
Regards
Edited by: OrionNet on May 7, 2009 3:35 PM -
French characters insertion not working fine
Hi all,
I'm using Oracle database 10.2.0.3, i migrate the database from 9i.
My problem is in my new database version i mean 10g when i'm inserting french characters like "éèà" in my database it's not working fine, i check to my old database (9i) it's working and i compare the parameters (NLS parameters they are same). i cannot find where is the problem making this appear, if anybody can help me.
here bellow that i did.
SQL> insert into dept values(0,'échec','éèàù');
1 ligne crÚÚe.
SQL> commit;
And from query i got:
SQL> select * from dept where deptno=0;
DEPTNO DNAME LOC
0 ┐chec ┐┐┐┐
here are some parameters i check:
SQL> sho parameter nls;
NAME TYPE VALUE
nls_calendar string
nls_comp string
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
NAME TYPE VALUE
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_timestamp_format string
nls_timestamp_tz_format string
nls_time_tz_format string
I need your help because it's very important for our database.
regards
raitsarevoI goth nothong, i think it's not yet set here bellow the result:
oracle@ab-db1:/abdb_data2/expdp$ env|grep NLS
oracle@ab-db1:/abdb_data2/expdp$
to my old server (9i) here the result:
[oracle@abillity3db oracle]$ env|grep NLS
ORA_NLS33=/home/oracle/product/9.2.0.4/ocommon/nls/admin/data
[oracle@abillity3db oracle]$
When i run the command env only i got for the new server HPux 10g:
oracle@ab-db1:/abdb_data2/expdp$ env
SFTP_PERMIT_CHOWN=1
MANPATH=/usr/share/man/%L:/usr/share/man:/usr/contrib/man/%L:/usr/contrib/man:/usr/local/man/%L:/usr/local/man:/opt/ldapux/share/man:/opt/ldapux/ypldapd/man:/opt/ipf/man:/usr/dt/share/man:/opt/samba/man:/opt/samba/WTEC_Support_Tools/man:/opt/resmon/share/man/%L:/opt/resmon/share/man:/opt/openssl/man:/opt/openssl/prngd/man:/opt/wbem/share/man:/opt/VRTS/man:/opt/graphics/common/man:/opt/sfmdb/pgsql/man:/opt/sec_mgmt/share/man:/opt/dsau/man:/opt/gnome/man:/opt/perl/man:/opt/sec_mgmt/share/man/%L:/opt/ssh/share/man:/opt/gwlm/man/%L:/opt/gwlm/man:/opt/ignite/share/man/%L:/opt/ignite/share/man:/opt/aCC/share/man/%L:/opt/aCC/share/man:/opt/audio/share/man:/opt/ansic/share/man/%L:/opt/ansic/share/man:/opt/langtools/share/man/%L:/opt/langtools/share/man:/opt/cadvise/share/man/%L:/opt/cadvise/share/man:/opt/image/share/man:/opt/imake/man
ORA_CRS_HOME=/home/oracle/crs
TERM=xterm
SHELL=/sbin/sh
ERASE=^H
SFTP_LOG_LEVEL=3
SSH_CLIENT=192.168.0.45 1525 22
SSH_TTY=/dev/pts/0
SFTP_LOG_FACILITY=2
USER=oracle
LD_LIBRARY_PATH=/home/oracle/oracle/product/10.2.0/db_1/lib
ORACLE_SID=abdb1
COLUMNS=157
MAIL=/var/mail/oracle
PATH=/home/oracle/oracle/product/10.2.0/db_1/bin:/home/oracle/crs/bin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/ipf/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/fcms/bin:/usr/bin/X11:/opt/resmon/bin:/usr/contrib/kwdb/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/graphics/common/bin:/usr/sbin/diag/contrib:/opt/sfm/bin:/opt/upgrade/bin:/opt/sec_mgmt/bastille/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/gnome/bin:/opt/mozilla:/opt/perl/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/hpsmh/bin:/opt/gwlm/bin:/usr/contrib/bin/X11:/opt/ignite/bin:/opt/aCC/bin:/opt/cadvise/bin:/opt/langtools/bin:/opt/imake/bin:.
LOG_SFTP=0
PWD=/abdb_data2/expdp
EDITOR=vi
TZ=EAT-3
PS1=oracle@ab-db1:$PWD$
LINES=60
SHLVL=1
SFTP_PERMIT_CHMOD=1
HOME=/home/oracle
LOGNAME=oracle
SSH_CONNECTION=192.168.0.45 1525 192.168.0.233 22
SFTP_UMASK=
ORACLE_HOME=/home/oracle/oracle/product/10.2.0/db_1
_=/usr/bin/env
OLDPWD=/abdb_data2
And for the old server RHL (9i):
[oracle@abillity3db oracle]$ env
PWD=/home/oracle
ORACLE_SID=abillity
HOSTNAME=abillity3db
LD_LIBRARY_PATH=/home/oracle/product/9.2.0.4/lib:
PVM_RSH=/usr/bin/rsh
LESSOPEN=|/usr/bin/lesspipe.sh %s
XPVM_ROOT=/usr/share/pvm3/xpvm
USER=oracle
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
MACHTYPE=i386-redhat-linux-gnu
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
EDITOR=vi
LANG=en_US
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/product/9.2.0.4
LOGNAME=oracle
SHLVL=1
ORA_NLS33=/home/oracle/product/9.2.0.4/ocommon/nls/admin/data
SHELL=/bin/bash
HOSTTYPE=i386
OSTYPE=linux-gnu
HISTSIZE=1000
LAMHELPFILE=/etc/lam/lam-helpfile
PVM_ROOT=/usr/share/pvm3
HOME=/home/oracle
TERM=xterm
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
PATH=/home/oracle/product/9.2.0.4/bin:/opt/IBMJava2-131/bin:/opt/IBMJava2-131/jre/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
SSH_TTY=/dev/pts/1
_=/usr/bin/env
I saw that in my old server environment variable LANG=en_US is set but in the new not.
What's your advice.
Thanks Nicolas
raitsarevo -
Af:setActionListener can not work fine in the af:iterator in ADF Faces RC
Hi all,
af:setActionListener can not work fine in the af:iterator/af:commandbutton. My code is as below:
<af:iterator value="#{backing_Bean.testList}" var="var" >
<h:panelGrid columns="1">
<af:commandButton icon="images/system/class.png"
text="#{var.name}" >
<af:setActionListener from="#{var.name}" to="#{backing_Bean.testText}"/>
</af:commandButton>
</h:panelGrid>
</af:iterator>The name [var.name] can be shown on the command buttoncorrectly, but when I click the button, the name can not be transferred to the testText in backing bean. why?
Thanks
HartHi,
works for me. Not sure how you want to access to the value, but if the bean is in request scope then the values are only available during this period.
Frank
Maybe you are looking for
-
Dear Experts, Let me update you that one of our client is looking to upgrade their Oracle E-Business Suit Verion from R12.0.6 to R12.1.3. and database version from 10.2.0.3 to 11.2.0.2. Current all the financial and SCM modules are implemented on the
-
I have a search page (jsp),...wn i open the page again, the older searcg result stays in the page. how to open an empty page each time?..(without the older search results).. im calling the search page thro' action.
-
HT202213 how to sync an ipad with two libraries
How do I share my itunes library between 2 devices? Dragging the music over to the device isn't doing the trick...
-
Reconforming project make Color crash...
This is my second proj in Color 1/5 with the same result As far as i make some changes to the SENT seq-ce in FC (replace footage, for ex.) and try to reconform - Color quits! I've tryed to make new XML file of the edited (sent) SEQs and load it for r
-
Can't install spotify, flash player or dropbox
I tried to install Dropbox and after installation I was not able to open it even by double-clicking on the app icon several times. Then, I tried to install Spotify and even though I was able to download the app it stopped from installing it because o