Left Nav lost after clicking submit button in iView

Hi Community,
I created an APC called CreateOrder which implements AbstractPortalComponent. This component acts as controller. In doContent() method, It checks if the create order submit button is clicked or not, if no, it returns createOrder.jsp page, if yes, it returns createOrderResult.jsp page. Everything works fine except left navigation disapear after I click submit button createOrder.jsp and createOrderResult.jsp shows up.
by the way I can create a createOrderIview using the APC component, able to see createOrder.jsp page and have result page shows up.
Anyone know what problem here? any help/sugguestion are very appriciated.

Make sure your iView isolation mode is set to URL...
Cheers

Similar Messages

Can we remain in the same state even after clicking submit button?

Hello All,
Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
Expected Result : should remain in the same stage
Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
Please help.

The above answer was proved wrong, so please follow this link to get the answer.
http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog

How to set focus on MessageTextInput after clicking submit button

Hi All,
I have submit button and MessageTextInput, by clicking submit button i have to focus on MessageTextInput control.
can any one tell me how to do this?
Thanks
Laukik Pachanekar

Hi,
As the submit button is clicked redirect the page to itself using
pageContext.forwardimmediatelytocurrentpage(null,false,null);
Now in process request use:
import oracle.apps.fnd.framework.webui.beans.OABodyBean;
OABodyBean oabean = (OABodyBean)pageContext.getRootWebBean();
oabean.setInitialFocusId("<id of messsage text input>");
Thanks,
Gaurav

Populating textbox in jsf on clicking submit button

I am having inputText box, dropdownlist , outputText box and a submit button in my jsp page.
I am pre populating the dropdown list from my managed bean. Also setting the values using setter methods that is input in inputText box and dropdownlist using managed bean.
On clicking the submit button and based on selected item from the drop down list, I need to perform populating outputText box with return string from getter method from bean.
But I am not sure how to handle this. Please find few lines of code below...
<h:inputText id= "mnNum" value="#{UserBean.mnNum}" size="18" maxlength="17" styleClass="TxtSz12 LH18" tabindex="1" title="Man Number"/>
<h:selectOneMenu id="lstService" value="#{UserBean.serviceType}" tabindex="3">
   <f:selectItems value="#{UserBean.getServiceItems}"/>
</h:selectOneMenu>
<h:commandButton action="#{UserBean.submit}" id="submitButton" value="Generate"/>
<h:outputText value="#{UserBean.getRequest}" />
public class UserBean extends FacesBean {
public String submit() {...}
public void setServiceType(String serviceType) {...}
public String getRequest() {
if(serviceType.toString()=="SearchService")
return "abc";
else if (serviceType.toString()=="basicService")
return "xyz";
else
return null;
}Please assist how to do it when submit button is clicked. I can redirect to different jsp file on click of the submit button. But I dont want to do that and I need to populate the output textbox in the same page !
If anything is not clear please let me know. Thanks in advance.
Edited by: 901007 on Jan 13, 2012 4:11 AM
Edited by: 901007 on Jan 13, 2012 4:13 AM

Page is coming up but lstService dropdown box is not displayed at all. But mnNum inputText and submitButton is showing properly.
Also after pressing submit button, "abc" text must be displayed in outputText box. But its also not displayed. Instead, the below error is shown,
Error opening /portlets/tools/webservicehelper/webservicehelper.faces.
The source of this error is:
java.util.MissingResourceException: Can't find bundle for base name resources.bundles.ValidationMessages, locale en at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521) at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260) at java.util.ResourceBundle.getBundle(ResourceBundle.java:962) at javax.faces.component.MessageFactory.getMessage(MessageFactory.java:102) at javax.faces.component.MessageFactory.getMessage(MessageFactory.java:175) at javax.faces.component.UIInput.validateValue(UIInput.java:1001) at javax.faces.component.UISelectOne.validateValue(UISelectOne.java:130) at javax.faces.component.UIInput.validate(UIInput.java:868) at
Any problems in below code?
My entire code below for UserBean.java and webservicehelper.jsp.
package net.verizon.portlet.bean;
import javax.faces.application.FacesMessage;
import javax.faces.component.UIComponent;
import javax.faces.component.UIInput;
import javax.faces.context.FacesContext;
import java.io.Serializable;
import java.util.LinkedHashMap;
import java.util.Map;
import javax.faces.*;
import javax.faces.model.*;
import java.util.*;
public class UserBean extends FacesBean {
     private static final long serialVersionUID = 1L;
     private String mnNum;
     private String serviceType;
     private String txtVal;
     public String getmnNum() {
          return mnNum;
     public void setmnNum(String mnNum) {
          this.mnNum = mnNum.toUpperCase();
     public String getServiceType() {
          return serviceType;
     public void setServiceType(String serviceType) {
          this.serviceType = serviceType;
     private ArrayList<SelectItem> serviceItems = null;
     public ArrayList<SelectItem> getServiceItems() {
          serviceItems = new ArrayList<SelectItem>();
          serviceItems.add(new SelectItem(null,"select one..."));
          serviceItems.add(new SelectItem("SearchService","SearchService"));
          serviceItems.add(new SelectItem("basicService","basicService"));
          return serviceItems;
     public String submit() {
          try {
                     txtVal = "abc";
          catch(Exception e) {
                        logger.error("error in submit method" + e);
          return null;
     public String getRequesttxt() {
               return txtVal;
--webservicehelper.jsp
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://bea.com/faces/adapter/tags-naming" prefix="netuix" %>
<%@ taglib uri="http://www.bea.com/servers/portal/tags/netuix/render" prefix="render" %>
<f:view>
     <h:form id="wnInputForm" onsubmit="return validateLoginForm();">
         <h:messages layout="table" globalOnly="true" style="color: red"/>
         <h:panelGrid columns = "2" width="100%">
              <h:panelGroup>
                   <h:panelGrid columns="1" cellpadding="6" width="400">
                   <h:panelGroup style="white-space: nowrap;">
                        <h:outputLabel value="Man Number" for="mnNum" escape="false"/>
                   </h:panelGroup>
              <h:panelGroup>
                   <h:inputText id= "mnNum" value="#{UserBean.mnNum}" size="18" maxlength="17" tabindex="1" title="Man Number"/>
              </h:panelGroup>
                   </h:panelGrid>
              </h:panelGroup>
              <h:panelGroup>
                   <h:panelGrid width="700">
                   <h:panelGroup>
                                  <h:outputText value="#{UserBean.requesttxt}" />
                        </h:panelGroup>
                   </h:panelGrid>
              </h:panelGroup>
              <h:panelGroup>
                   <h:selectOneMenu id="lstService" value="#{UserBean.serviceType}" tabindex="3">
                        <f:selectItems value="#{UserBean.serviceItems}"/>
                   </h:selectOneMenu> <br>
                            <h:commandButton action="#{UserBean.submit}" id="submitButton" value="Generate"/>
              </h:panelGroup>
         </h:panelGrid>
           </h:form>
</f:view>Edited by: 901007 on Jan 16, 2012 8:07 AM

Help please. Purple dotted outline after clicking a button in my navigation bar.

Please read my last post in this thread: http://forums.adobe.com/message/2392890#2392890
How can I remove the dotted outline after clicking a button in my nav bar at my site? (site is linked in that thread I linked)
EDIT: Nevermind. After doing some research, I found this. http://arjaneising.nl/css/dont-remove-the-outline-from-links
This answered my question.
Message was edited by: DBXPX

Excellent.
It would be good to mark this thread as Answered so the folks who help will not need to keep clicking in it. Thanks.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Why is there a delay after clicking any button when publishing to iOS?

When I publish to HTML5, the app seems to run fine on my PC via a web browser. However, when I submit for iOS there is a very noticable delay after clicking any button. It takes at least 1-2 seconds for the next slide or object to appear. This might make it difficult to get the app approved when I'm finished. Please let me know if there is a workaround for this.
Thanks,
Jim

I get the same results in a browser or as an app; I also seem to have the same problem on the Android Glaxaxy II (in browser). I do not have this issue on any PC. Here is the link: http://www.anacore.com/demo/
I'm using buttons to Jump to Slide or Go to Next Slide. I am also using buttons to show/hide using advanced actions (under Easy to Use -> Easy Widgets). Pleaes let me know if you have suggestions for resolving the lag.
Thanks,
Jim

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      fl = 1.
      GET CURSOR LINE lin.
ENDCASE.
ENDMODULE.                 " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
    IF tab1-current_line = lin AND fl = 1.
      screen-input = 0.
    ELSEIF tab1-current_line < lin.
      screen-input = 0.
    ELSE.
      screen-input = 1.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
    DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

IDVD quits after clicking Burn button, need help.

After clicking burn button on iDVD, the software quits.
The message appears:
The application iDVD quit unexpectedly.
Mac OS X and other application are not affected.
Click Reopen to open the application again. Click Report to see more details or send a report to Apple.
part of the report:
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: iDVD
Path: /Applications/iDVD.app/Contents/MacOS/iDVD
Parent: WindowServer [94]
Version: 5.0.1 (626)
Build Version: 26
Project Name: iDVD
Source Version: 6260000
PID: 417
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000

I SEND MY THANKS TO LATVIA. YOUR REPLY SOLVED MY PROBLEM OF UNEXPECTED QUITS AFTER SEVERAL HOURS OF "HELP SEARCHING" ON THE INTERNET.
SO MY ADVICE TO MAC USERS FROM OTHER COUNTRIES THAN ENGLISH AND COUPLE MORE SUPPORTED LANGUAGES: CHECK FIRST YOUR INTERNATIONAL SETTINGS

Hi all, how to dubug an application after clicking ok button on popup

Hi all, how to dubug an application after clicking ok button on popup, pcan anyone give me the porcedure
Regards,
Sre

Copy the below text into a notepad file and save.
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Now when you get a popup and want to debug from the same, drag & drop the saved file on to the popup window and debug starts right after the next user-command.

I'm trying to install itunes on new laptop but after clicking install button it jumps straight to thank you page!

i'm trying to install itunes on laptop but after clicking install button it jumps straight to thank you page!

Hello hate_technology,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
If you are having trouble installing iTunes or QuickTime for Windows, follow the troubleshooting steps in this article.
Best of luck,
Mario

Have a window pop up after email submit button is clicked

Is there a way to have a pop up occur after a user has pressed the email submit button? I need to have a reminder pop up as the form is submitted. Thank you in advance!

Have you gotten an answer to this question yet?
Here's what I did:
I created a regular button with the following script on the "click event"
EmailSubmitButton.execEvent("click");
Then created another button (EmailSubmitButton)with the Control Type set to Submit; Submit to url should be: mailto:[email protected]; and Submit as PDF (if you want the actual form to come back to you) or XML (if you just want the data).
Then I added a script under the EmailSubmitButton's PreSave Event, which states:
app.alert("Your Form Has Been Submitted.");
I distribute my form using the Adobe 8 Wizard and it works great.
I would like to add a script that closes the form after submission. The script I found is
app.execMenuItem("Close");
This script is placed on the next line following the above app.alert message under the EmailSubmitButton. It works fine if you send the form manually via email, but Adobe has an error message when I try to distribute it.
If anyone can help me with this issue. I would really appreciate it.
Thanks,
Jen

How to open a new OAF page in new window while clicking submit button

Dear All
I am facing one problem.I have to pass some parameter in new page only after validation.I can't do validation in processRequest bacause I perform validation after clicking the submit button.
So I have to write redirect code in processForm Request. I can not use simple "Button" bean since I have to set destination uri which could be set only in processRequest.But I can not pass parameter with it in process request.
Thats why I have decided to use submit button but there is not target frame option in property inspector,So I am not able to open it in new window.
Kindly give me some suggestion .
Thanks in Advance

hi,
u can use submit button. U need to handle submit button press in processFormRequest method.
if(pageContext.getParameter("Submit"!=null))
// validate your parameter
if parameter u capturing are valid then...
pageContext.setForwardURL(func, params ...............) // check devguide for details
if u want to access these parameter in second page . you can write this logic to processRequest of target page.
U can refer toolbox tutorial drilldown and createpage examples for implementation details.
Regards,
Ram

Safari needs to click submit button twice when file uploading

Hi all,
I'm using Safari 4.0.5 and developing the html (no AJAX, but plain PHP posting) form with the file uploading on my local environment. I tested it fast and thick several times, then suddenly Safari stopped to upload the jpeg file, indicating loading animation on the address bar. So I tried to click the submit button once again, I succeed in sending two posts including one jpeg image.
There's no problem with other browsers like Firefox and Chrome. Additionally, I tried to reinstalled Safari, rebooted Snow Leopard and checked file's permissions by Disk Utility app, but no dice.
Any suggestions would be greatly appreciated.
Thanks,

I am having the exact same problem except that I'm in Safari 5.0. Did you ever come to any resolution on the problem?
I am having trouble uploading certain jpegs (can't find a common thread between the images that won't work though they tend to be larger than 100k and larger than 800px wide). When I have the problem the progress bar just hangs at about 10%. The page never times out. Never throws any kind of error. I confirmed that the file is never making it to the application layer. Such a weird and intermittent problem. All other browsers are fine. Just Safari is a problem. Even with these images that are giving me a problem, sometimes they work - especially after restarting the browser.
Any help or insight from anyone would be greatly appreciated.
Message was edited by: Neal Ferrazzani

Gettting acknowledgement after clicking 'Submit be Email'

Hi
I would like to know how to get a message like 'Thank you for your order' after filling up all relevant fields and clicking 'Submit by Email' button.
Thanks for the help.

Hi
I have put the code in the button's postSubmit event, I can't get any alert.
I would like to do this to let the person know that he has submitted the form. Is there a way to submit just once, to refrain one from clicking the Submit button a number of times.
Thank you.

Error while clicking submit button?

Hi All,
I am trying to implement selectOneListbox component. This displays all the data which I required. I am also able to retrieve indiviual data. I checked this using alert in java script.
The problem which I am facing is that I have a command button on the page. Once I click the submit button. I am getting an error.
org.apache.jasper.JasperException: javax.servlet.jsp.JspException: Duplicate component ID 'form1:_id0' found in view.
I am unable to proceed. Please let me know any solution for the problem.
Regards
Rishab

HI All,
I have fixed this issue. This was problem with RSA. The id was not getting generated. So explicitly I added the id and it worked.

Left Nav lost after clicking submit button in iView

Similar Messages

Maybe you are looking for